Help someone tried to change FSB wont change
ok well I just got into some over clocking and I have a MSI mother Board with a 1.7ghz Celeron and I went into the bios and I was going to try to change the FSB from 100mhz to 133mz and the voltage from 1.750v to 1.850v, well I saved the changes and exited and my computer rebooted and I got a POST warning it said FSB mistake and it changed the FSB back to 100mhz and I cannot figure out how to keep it at 133mhz well my mother is this http://www.target-sale.com/tusa/items/mbsocket478/i03770.html thats even where I bought it from but I dont think they would help me with overclocking its a cheap MSI board yes but I didnt have much choice becuase I had a AMD 1ghz and the fan shut off in the middle of the night and burnt up the chip so I just replaced everything I have a ECS Board and a AMD Athlon XP 1800+ but I need to get a different board for it becuase the ECS isnt working right with it well if anyone can help me with my FSB change problem it would be appriciated, thanks
PC-Specs
Intel Celeron 1.7ghz
MSI 6547-010 Socket 478
Maxtor 120gb HD Primary Master
fuji? 10gb HD Primary Slave
8x8x32 Hewlett Packard CD-RW drive seconary master
Compaq DVD-Rom 4x secondary Slave slave
Geforce2 MX 32mb (Currently Overclocked) soon to be a geforce 4 or geforce FX
512mb DDR PC2100 Ram soon to be 1gb
Quote
Originally posted by Sk8emerica08
alright now if I figure out my network card problem when OC'ing would it be bad to overclock at 130mhz and make my cpu 2.2ghz I think I could suck a few more mhz out of this but not enough to matter, and what is the highest temp that a CPU should go to before it gets damaged well I would like to know a Safe temp if you know what I mean I do not want to destroy it from OC'ing too much right now im not OC'ing becuase if I was I wouldnt be online :P , Becuase of my little network card problem that you can reas in my last post, but I have the OEM Intel fan and from what im hearing as long as thats on there and its got thermal cream on it I should be fine but I just wanted to know so thanx for the help from everyone, so far I have giving everyone good ratings becuase everyones helping me out so much oh and a question for you novjoe thes voltages and stuff will changing that stuff make it run properly, and two I only a a 350watt power supply should I wait until I can get a 450watt or something before I change all that,
Thanks,
Josh
Josh, please try and use more punctuation. Your posts are very hard to read.
Anyway, i don't know for sure, but i think your CPU supports clock throttling. This is a mechanism that slows down the CPU if it gets to hot. You will notice it, it's quite a steep change in clockspeed.
Intel has very clear spec sheets on every single piece of hardware they aver made, you should be able to find the max temprature in those. Personally i keep a temprature of 55-60 degrees Celsius as an absolute maximum.
Similar Messages
-
Help! Trying to change frame size of project/sequence
I have tried everything I can to change my project's frame size to 320 x 240 from 720 x 480--modifying sequence settings (nowhere to change size, just "timeline options" and "render control" tabs), clicking on the sequence's frame size in the browser (even with option and command), going into user preferences, system preferences, item properties, project properties without any dialog box that will help me make the change. I checked off "Prompt for seeings on New Project/Sequence" in User Preferences, but it only gives me a pop-up menu with the Easy Setup options. What's happening? This is taking me forever to figure this out. Any help would be greatly appreciated. Thanks.
Hi Bob,
Why do you want a project at 640 X 480 ? You will not be able to print it to your camcorder.
Just put those values in quicktime conversion box, and your exported movie will has this frame size.
May be the confusion become from the aspect ratio of pixel...
DV pixel are displayed "as square pixels" in Final Cut Express, if you uncheck this option in viewer, you will get a horizontal squashed image.
That's because TV set do not handle pixel like computer monitor and your camcorder record it with this aspect.
So don't be concern with the 720 or 640 question: just export your movie using quicktime conversion set to 640X480 for viewing on computer (like I suggest earlier) or simply "print to tape" from FCE to your camcorder (with stretched pixel for TV monitoring).
Michel B. -
Problem solved!
Since the question - actually not a question but merely a useless post - is almost one year old, the chances of the OP still getting email notifications for this "issues" are probably non existent and you are most likely not going to hear back from him.
Sign out of your ID, restart the iPad and then try signing in again and see if that works. And since I have no clue what iOS your are running, this will be somewhat generic.
Settings>Store>Tap your ID. Sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. To back to Settings>Store>Apple ID - sign in again. -
Can somebody help me trying to change question to my itunes then i got locked out my itunes
can somebody please tell me how i can restore my itunes from it be locked because of me not knowing the questions
iTunes will run on any Windows PC satisfying its minimum system requirements:
1Ghz Intel or AMD processor
512MB RAM (though in practice much more is preferable - with Win 7 or Win 8 a minimum of 4GB)
Windows XP SP3, Vista, 7, 8 (with the 64-bit installer required for the 64-bit editions of the last three)
400MB available disk space (again, much more than this is a realistic requirement - even a moderately sized iTunes library can use several hundred GB of disk space for media storage, and libraries in excess of 2TB are not unusual)
There is no issue of "hp and apple does not have any contracts with each other"!
There is, however, some anecdotal evidence that the scripts on the Apple site (http://www.apple.com/itunes/download/) that are supposed to detect the version of Windows you are running may fail for some users - jumping straight to the "Thank you for downloading ..." page with the installer not having been downloaded. As an alternative, you can go directly to the relevant downloads:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe
See turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for more details if you're still having problems with installation. -
I'm trying to change my ICloud e-mail to match the one associated with the Apple ID? Can someone tell me how to do this? Seems like the phone won't accept the new one, the message states "you already have acct associated....." (a given!!) I need help !!
You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.
-
HT204266 'm trying to change my payment method to none but I can not. Can someone help me, please?
I tried to go into my account as well in setting to tried to change my payment method to none but I can not change it. I do not want my payment method on my account any more. I can not even download free apps because it states that my payment information is wrong, but I know that it's not. What can I do to delete my payment information? Please if anyone can help, please send me any suggests.
Turn off FaceTime and iMessage.
Wait a few hours then turn them back on. -
I've been trying to change my icloud apple ID to match my itunes apple ID so i can manage my storage. I haven't turned on the cloud since i got the phone. I've forgotten my password for the icloud apple ID and i do not have access to the OLD OLD OLD email address its trying to send my password to. Can someone please tell me how i can make this change without knowing my old password??? Can't manage storage or buy more without knowing the old apple id for icloud.
Hello, nikkihutchins10.
Thank you for visiting Apple Support Communities.
I understand that you are attempting to reset your Apple ID password. I would try resetting your password via answering the security questions instead of sending the email. The first article will walk you through that process. If you are still unable to reset your Apple ID password, see the steps in the second article.
If you forgot your Apple ID password
Contact Apple for help with Apple ID account security
Cheers,
Jason H. -
i want to change my password but the system is not sending me message to reset my password. pls help someone is using my password without my permission and i want to change my password.
If you are talking about your Apple ID password, make sure it IS your apple ID.
In the past 24 hours, I have received two emails "How to reset your Apple ID password". I had not requested any change and I finally realized someone else is trying to reset the password. I have had this Apple ID since 2009 so I am not using someone else's ID.
Again, if you are not receiving the email to reset make sure you have the right ID - it might be going to the email linked to the account, and it might not be yours. -
I tried to change the file type of the movie, but now I am unable to open/edit it in iMovie, HELP !
I tried to change the file type of the movie, but now I am unable to open/edit it in iMovie, HELP !
Thank you very much! This is exactly what I was looking for.
I appreciate your time and effort in solving my question : ) -
I lost my credit card and restored it in my bank, but numbers on new card are different.(the bank account is the same). I'm trying to update credit card info on itunes but it's declined. sometimes it saies that my billing address or countrey is not all right. I've tried to change a countrey and billing adress too but it doesn't help. I've tried to confirm my credit card information several times and it has blocked 8 dollars on my balance(1 dollar for each time I tried to confirm), please help me to confirm my account and credit card, I have paid from this account before many times and it was accepted i don't know what happaned now.
please apple write me on my mail:********
<Email Edited by Host>Hello jumanjet,
Thanks for the question, and welcome to Apple Support Communities.
I understand you are having issues adding payment information to your account.
If your account information does not match your credit card, you may get a message stating "The credit card was declined."
To expand on the above, your billing name or address may not match the address listed on your credit card statement. Any discrepancy in punctuation, abbreviation, or capitalization can cause errors, which might prevent you from purchasing from the iTunes Store. If you moved, or if your zip code changed recently, ask your credit card company to make sure their records are up to date and match exactly what you are entering as your billing information.
For more information, see the following helpful resources:
iTunes Store: How iTunes Store purchases are billed
http://support.apple.com/kb/HT5582
iTunes Store: Changing account information
http://support.apple.com/kb/HT1918
iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/TS1646
Thanks,
Matt M. -
I am trying to change my apple id Country. but it says " you have a store credit balance, you must spend your balance before you can change it." i don't wanna spend it to change my country. by the way i can't update any of iPhone apps. need help
It's strange because I can change my AppleID country without this message.
So what to do? Just try to do this again, but on another device. You may also erase cookies and history of your browser.
I hope it will be helpful, good luck! -
I want to change my Apple ID because I have a new email address, but what happens when someone tries to facetime me using my old Apple ID? Will they still be able to contact me on facetime using my old Apple ID?
Not if you change the ID. You would need to give them the new address.
-
HI, i bought my i touch 4th gen from the philippines, and i transferred here in the US. i would like to purchase an application here in the US but i wont allow me to. and i have been trying to change my address and country but it wont let me too.
What happens when you change your address in your iTunes account? You also have to have a payment method associated with the USA, For example gift cards are restricted to the country of their purchase.
-
While trying to change password getting ora-00600 [4842] - Plz help
while trying to change password getting ora-00600 [4842] - Plz help
database : 9.2.0.4
o/s : LinuxHi,
when getting an ORA-600 you always should contact Oracle support please ;-)
To diagnose an ORA-600 the stack trace will be necessary - see the trace file mentioned in the alert.log when the ORA-600 did happen.
But FIRST OF ALL you should definitely apply patch set 9.2.0.8 and see if this error happens again (metalink.oracle.com ==> PATCHES ==> Quick Links ==> <your platform>). Support will ask you to do the same before they start diagnosing anything in this case.
And please keep in mind that 9.2.0 has reached end of Premier Support more than 1 year ago.
Kind regards
Mike -
HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?
I have the same problem, and the solutions in Error changing modules | Lightroom do not work. Even uninstalling and reinstalling a new copy did not solve the problem. As anyone got an idea what other lingering files might be causing the problem?
Maybe you are looking for
-
Creating audio tracks in logic 8.
Hi, Having used logic 8 for about half a year now I have had no problems whatsoever. However, about a week ago, when creating new audio tracks this happens. I create 2 tracks for example Audio track 1 works as normal and below the level meter at the
-
I just need to know my best options to control the amount I pay in overages since I messed up. Been with Verizon for at least 15 years and I haven't really had this come up before. Not sure how I messed up this bad this time
-
How to interface with ROWID column in DB2?
I'm using DB2 version 7.1. I have a column in a table called ROWID, and the Data Type is ROWID. However, I don't know how to interface with it in Java. For example, for CHAR and VARCHAR, I use the String class. For SMALLINT, I use int, etc. But what
-
I have an apple I phone and each time I get an email it notifies me how do I silence this?
I have an Apple I phone and each time I get an email I get a notification how do I silence this?
-
Merging Backups from a cloned machine
I had been using Time Machine to back up my MacBook Pro to an external hard drive. When I bought my iMac, which I intend to use as my main machine, I used the Time Machine backups to clone it from the MacBook, changing the name of the new machine. I