Help! Sound Blaster Audigy - bass and tre

Hello! I had a Sound Blaster Audigy. There are any problems in the control with the Creative Surround Mixer. It cannot to set the bass and treble. Why and what is problem with it's Thank you!?Problem with the Sound Blaster Audigy - bass and treblehttp://icq299885550.mysinamail.com/Photo/Creative.jpghttp://icq299885550.mysinamail.com/Photo/Creative2.jpg?Message Edited by mrchan2002 on -7-20062:27 AM

What's the model number of your soundcard? Certain series of Sound Blaster doesn't support adjusting bass and treble so you have to use the Graphic Equalizer software instead to adjust it.
Jason

Similar Messages

  • Sound Blaster Audigy Drivers and Applications CD-Rom

    Does anyone know where I can get or download?the "Sound Blaster Audigy" "Drivers and applications" CD-rom?
    I have included a pic below:
    <img alt="cd-rom" src="http://www.geocities.com/pershingbpa/soundblastercd.jpg" align="left[/img] width="70" height="705">

    jay23,
    First extract the RAR file you downloaded using WinRar. During the extraction, WinRar will create an ISO file which is an image of the installation CD. If you don't want to burn that ISO file to a CD, then download and install MagicDisc from the link I gave above. MagicDisc lets you mount an ISO file as a virtual hard dri've. You should be able to install from that virtual CD just as if it were a real hard copy CD, but I've never tried that so can't say for certain.

  • Creative Sound Blaster Audigy ZS And Vista Driver installation prob

    HI!
    I encounter Installation problems with that file:
    Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
    I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
    Thanks!
    Julien

    estebandit wrote:
    Is there a known issue for this
    Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
    SBAX_PCDRV_LB_2_8_000.exe
    Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
    Requirements:
    Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
    Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
    whereas the correct driver shows the following,
    This download supports the following audio devices only:
    Creative Sound Blaster Audigy including Platinum and Platinum eX series
    Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
    Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
    Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
    Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

  • SOUND BLASTER AUDIGY SE AND VISTA DRIVERS WITH FULL FUNCTIONALITY- WOOOOO

    (ONLY DRAWBACK IS THAT YOULL HAVE TO FIND ANOTHER MEDIA PLAYER BESIDES WINDOWS MEDIA PLAYER FOR YOUR SAVED AUDIO FILES: I WENT WITH WINAMP)
    CONTINUE ON-
    Download RAR file with ISO inside and install if you don't have the installation CD
    installation cd with EQ download: http://files.filefront.com//;689430;;/
    If you do or after you finish downloading goto step A.
    A) Take your Creative Driver/Install CD, copy it to your hard dri've.
    B) Goto Setup.exe right click, goto properties, goto the Compatibility tab.
    C) Set it for Windows XP SP2.
    D) Run install the Creative Audigy and if you need MediaSource *WMP Will pop and hiss while multitasking I reccomend MediaSource as it does not although the "Sources" is glitchy.
    E) Restart when told to
    F) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
    F) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!
    G) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
    G) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!Message Edited by jeepbme on 03-08-200708:49 PM
    Message Edited by jeepbme on 03-08-200708:50 PM

    estebandit wrote:
    Is there a known issue for this
    Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
    SBAX_PCDRV_LB_2_8_000.exe
    Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
    Requirements:
    Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
    Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
    whereas the correct driver shows the following,
    This download supports the following audio devices only:
    Creative Sound Blaster Audigy including Platinum and Platinum eX series
    Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
    Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
    Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
    Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

  • "Sound Blaster Audigy Fx" and stereo mix availability

    If I buy/install the "Sound Blaster Audigy Fx" will it add the stereo mix option to my sound properties, also
    does this card work on windows 8?
    http://www.bestbuy.com/site/creative...&skuId=3287009

    Re: Sound Blaster Xtreme Audio missing Stereo MixK I think I'm having a similar problem with my Windows 7 Professional system.
    I'm am getting sound out of my card.
    When I right click on the "speaker" icon in the task bar I see the following list of 5 options
    Volume Mixer
    Playback Devices
    Recording Devices
    Sounds
    Volume Control Options
    However when I click on "playback devices", "Recording Devices" and "sounds" nothing comes up.
    What I did do is completely uninstall all traces of any installed Creative software and in the device manager did an uninstall for the SB Xtreme Audio Card.
    My recording device is the integrated microphone in the Logitech Quickcam/IM that I have installed. If I go to accessories and click on "sound recorder" it doesn't start up either.
    The other issue that I see is that when I go into Control Panel and click on Sounds, nothing happens.
    Something is definitely going on but I can't seem to track down the cause.

  • Help , sound blaster audigy ga

    I have format my computer and lost my cd's and i have problem to find my true drivers
    I connect the sound blaster with coxial cable to my souround syster 5. and even in dvd and in the surround mixer on test only the front speakrs are working...
    please help me...

    That's normal for stereo material but you should be able to get all output in DVD. Ensure that SPDIF Passthrough or similar option is selected for the DVD playback software and also disable the sound card AC3 decoding. If you do not have the driver, then you can get the driver here. To configure your sound card, run ctpanel.exe. To find this file, I would suggest to search for it (Start - Search - For Files or Folders).
    JasonMessage Edited by Jason-CL on 04-9-2005 08:09 AM

  • Creative Sound Blaster Audigy LS and soundfo

    Hi! i got an Audigy LS, is it possible to use soundfonts with Cubase For example?
    i didn't notice any instrument lik synt A or B like Sbli've did.
    T. I.A.
    Massimo

    I'm not completely sure of the answer, but the Audigy LS specs have both wavetable synthesis and soundfont support listed. That indicates to me that it should be possible.
    -Dave
    [email protected]

  • Sound blaster Audigy LS install probl

    HI, I just bought a sound blaster Audigy LS, and after installing the card Windows finds the new hardware,but when I put in INSTALLATION CD I get "setup could not detect any sound blaster audio card on your system" I`ve disabled all onboard sound and old drivers,and tried ALL pci slots now as well. Im very sure the card is fitted correctly, the model no is: SB030. any advice would be very helpful. Thanks alot ` WILLEEEE `

    All,
    In order to give any helpful suggestions to these kinds of problems we will need a couple of extra bits of information:
    ) Steps already taken to resolve problem
    2) System Specs including processor and chipset
    3) Model Number of the sound card
    4) Operating system and service pack
    Willeeee provided most of this, however he has also done all of the steps I would suggest without knowing #2 and #4. In all of these cases it is worth trying to install the latest drivers from our website. I know that the original Audigy can be installed using only the drivers found on the webpage and I would suggest trying that first. Also make sure that you have tried different PCI slots in your system.
    Jeremy

  • Sound Blaster Audigy software CD probl

    For a few years now, I have been running the old Sound Blaster audigy card, and have never needed to upgrade as it's such a good card and it does everything it's required. The problem comes in the form of the original software CD distributed with the card. (I've already read the faq and have already found a solution) The software CD is very terrible, in the great many years I have had to reinstall my system for various reasons, the part where I install my audigy card software is by far the most tedious, and completely unpredictable.
    When I say tedious, the installation takes forever, even if you set the most minimum of installation requirements. On top of that, if the program in itself loses focus, it halts the installation, so no playing Freecell in the background to pass the time. Otherwise, the installation generally halts at around the 97% mark and says "updating drivers..." I've left this one night and gone to bed and it's still been at 97% over 0 hours. This one really gets me, there's no error message. So the only way around this is to ctrl-alt-del, and uninstall, and then restart.
    On the other hand, as I recently found out, installing of the playcenter that comes with the CD, often stalls the installation completely. During the install playcenter wants to know which media formats to assosiate. The problem is, it brings that screen up behind all the windows, and the only way you know it's done that is by clicking "show desktop". It's not possible to bring it to the foreground, so basically the installation has to be killed.
    But then I get to the unpredictable part, half the time the installation isn't complete, and if you open up the surround mixer, most of the information is missing, no speaker settings or EAX.
    So for a long time I looked for a remedy to this problem, often downloading the Webupdates didn't seem to always work, they too had their similar problems. And only now have I finally come up with the answer, the new OpenAL beta drivers. Completely different installation program, and works perfectly. To think an installation of the size of around 20mb has fixed such a long problem, thankyou Creative I can now chuck out this completely useless CD and replace it with the quick and very easy OpenAL beta. I thought it was supposed to be the beta products that were more buggy.
    Anyone else noticed these style problems?

    I've been fiddling around in the Device Manager and it has Other Devices and under it is Multimedia Audio Controller, I can choose to either reinstall the driver udate the driver, disable it, or uninstall it. Here's what comes up on properties
    This device is not configured correctly. (Code )
    To reinstall the drivers for this device, click Reinstall Driver.
    Help would be appreciated here. I'm a big gamer and would like to have this up and running before our first CAL Match.

  • Sound Blaster Audigy Platinum BIG Proble

    I have sound blaster audigy platinum and in few weeks I have got this strange problem that I?ve hadn't before. If I use old drivers for it, windows gives me blue screen with "bad pool caller" very often when I play or just listen music. With new drivers it gives me "driver irql not less or equal". At the same time in linux it works fine. In windows I've checked viruses etc. reinstalled windows many times, used memtest and so on. Finally 2 days ago I took my Sound blaster off my computer and ever since I haven't got any problems. So it obviously is the problem. But I just don't know what to do anymore to get it work? Now I use the sound card that comes integrated with my motherboard but it's not as good. Btw I don't use integrated sound card same time with sound blaster. Please Help!

    Hate29,
    You might find something useful here.

  • Sound blaster audigy midi p

    I bought a SB Audigy2 value bulk, this card haven't a onboard midi port; is there the possibility to buy and connect a midi port?

    Originally Posted by karloch
    Hi everyone!
    I recently purchased a Sound Blaster Audigy RX and I'm very pleased with the improved audio quality over the Intel HDA included in my motherboard.
    However, I have a problem when playing MID files using hardware midi synthesis: I select the correct midi device "SB Audigy 5/Rx Synth A" and play the midi file using Windows Media Player. I can hear the tune, but with LOT of noise. As this problem is only happening with MIDI, I wonder if it is a driver issue or a faulty card. I have tried with official Creative drivers and with the Daniel_K's SB 5.3 support pack with same result.
    I'm attaching an MP3 file of the MIDI output you can get a clear picture of what's happening.
    ffaboss_short.zip
    Should I replace my card or is it a software problem?
    Hi karloch,
    Pardon me for saying that I did not detect the noise you mentioned in your attached MP3 file. I can't be sure it's the noise or is it part of the music; especially towards the end of the playback. I'm using VLC player btw.
    Perhaps, you may like to test it with another media player.
    Cheers,
    JL-CL

  • Sound Blaster Audigy Joystick/midi brac

    I was wondering if anyone knows where someone can get the joystick/midi bracket for the Sound Blast Audigy cards (SB0090)? I am going to be upgrading some components (including mobo which I will then lose my joystick port) and I have a Microsoft Sidewinder Force Feedback joystick that works perfectly that I enjoy using when I play Battlefield 942 and some other games. Thanks?Steve

    Originally Posted by karloch
    Hi everyone!
    I recently purchased a Sound Blaster Audigy RX and I'm very pleased with the improved audio quality over the Intel HDA included in my motherboard.
    However, I have a problem when playing MID files using hardware midi synthesis: I select the correct midi device "SB Audigy 5/Rx Synth A" and play the midi file using Windows Media Player. I can hear the tune, but with LOT of noise. As this problem is only happening with MIDI, I wonder if it is a driver issue or a faulty card. I have tried with official Creative drivers and with the Daniel_K's SB 5.3 support pack with same result.
    I'm attaching an MP3 file of the MIDI output you can get a clear picture of what's happening.
    ffaboss_short.zip
    Should I replace my card or is it a software problem?
    Hi karloch,
    Pardon me for saying that I did not detect the noise you mentioned in your attached MP3 file. I can't be sure it's the noise or is it part of the music; especially towards the end of the playback. I'm using VLC player btw.
    Perhaps, you may like to test it with another media player.
    Cheers,
    JL-CL

  • Help with Sound Blaster Audigy Value 24-bit..keeps crashing when connecting to the inter

    pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
    how cn i solve this problem..
    pls help..thnx
    my spec:
    AMD Sempron 2400+
    Epox 8rda3i
    Seagate 80gb
    Palit GeForce 6600gt
    Creative Sound Blaster Audigy Value 24-bit

    screwguy_28 wrote:
    is this the one?
    IRQ 0 System timer OK
    IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
    IRQ 3 Communications Port (COM2) OK
    IRQ 4 Communications Port (COM) OK
    IRQ 5 Uni'versal Serial Bus (USB) Controller OK
    IRQ 6 Standard floppy disk controller OK
    IRQ 8 System CMOS/real time clock OK
    IRQ 9 Microsoft ACPI-Compliant System OK
    IRQ 9 SCSI/RAID Host Controller OK
    IRQ 0 MPU-40 Compatible MIDI Device OK
    IRQ NVIDIA nForce PCI System Management OK
    IRQ 2 PS/2 Compatible Mouse OK
    IRQ 3 Numeric data processor OK
    IRQ 4 Primary IDE Channel OK
    IRQ 6 Sound Blaster Audigy OK
    IRQ 8 SoftV92 Data Fax Modem OK
    IRQ 9 NVIDIA GeForce 6600 GT OK
    IRQ 2 Standard OpenHCD USB Host Controller OK
    IRQ 22 Standard OpenHCD USB Host Controller OK
    Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
    Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
    jutapa

  • Need help fast just bought sound blaster audigy se c

    Hi please anyone help me i just install my new sound blaster audigy se i also disable my onboard sound the problem is i dont get proper 5. surround sound from my speakers it just seem that all the speakers play but dont get the crossover ,I have a cheap 5. system which i bought together with my sound card the bran is duraband model ht-397 80 watts i bouth these two products from wal-mart and i set it up in my bedroom.Also when I go to the speaker checks to hear if each speaker is working it seem i would hear the two rear speaker test sound would come from the two front speakers? i dont like this because before i hand two simple speakers and would hear the change over.. pease anyone? if you can help please reply asp...

    Hi,
    May I know what OS are you running? Please make sure that all background applications are temporarily disabled when installing the sound card.

  • Integrated Sound Blaster Audigy ADVANCED HD Help

    Hey guys, I was hoping maybe someone could help me... I have the Integrated Sound Blaster Audigy ADVANCED HD driver but its only for 32-bit operating systems. I am running windows 7 64 bit and I was wondering if there are any 64 bit drivers around since I couldn't find any on google. If not, are they planning to release one anytime soon? Thanks for the help.

    You know I did that and it worked. Thanks you.
    I should mention that when I contiued the activation it failed to load giving an error saying no audio driver. So, I went to the Dell website and downloaded the sigmatel audio file, re-installed and it worked. However the saga continues as it only sees 2. speakers when I have a 5 speaker system and i can't figure out how to change that settings. I followed the help instruction but under the confiuration I am not given any option. so still some work to be done. I would have expected the process to be simpler, you really would need to be quite skilled to be doing all this tweaking, if you were a novice you'd be lost!

Maybe you are looking for