HELP: SOUND PROBLEM

I just bought a used itouch 3rd generation and the sound is messed up when I plug in the earphones/headphones. It comes out staticy, sometimes the sound won't come out at all, sometimes you have to put the headphones to the right positons, sometimes the music gets jumbled up. I don't know what the problem is. When I just play it regulary it is perfectly fine. Thanks.

- Have you tried different headphones?
- If yes and still have problem, try the standard fixes to rule out a software rpoblem.
- Reset. Nothng will be lost
- Restore from backup
- Restore to factory defaults/new iPod.
It is likely that the headphone jack needs replacement.  A third-party place like this one is less expensive than Apple since Apple just exchanges the iPod for a fixed price depending upon model and capacity.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Apple - Support - iPod - Repair pricing

Similar Messages

  • Please Help - sound problem

    After reformatting my laptop and re installing xp pro everything works but my sound,,, before anyone suggesting I should renew my sound drivers or even update my BIOS let me mention that I have already taken those stept, the Mic works but I have no sound coming out of the laptop.....
    Any Ideas????
    [Edited by: admin on 02-Apr-05 15:40]

    Hi Nick,
    Sorry for the long delay I only just noticed your post. Easily done if you post in the middle of another thread.
    To diagnose your sound problem the best approach is to systematically check (and isolate) each possible problem area until the culprit is found. For sound problems follow the sequence :-
    1. Check Hardware. If you have a manual control check that it is turned fully on (this may be a wheel or knob somewhere on your notebook). There is no point carrying on if this is turned down/off.
    2. Check Software. This is where the fun begins.
    2.1 Check the sound properties (available from Control Panel) and make sure that the MUTE box is not ticked.
    2.2 Check the individual volume levels shown on the sound properties box. Set them all to maximum.
    2.3 Select Device Manager (from Control Panel) and check the entry for Sound/audio devices. Select your sound device and click the 'troubleshooting' option. Follow the on-screen checks.
    2.4 If you still have no sound deinstall the sound device (from ADD/REMOVE hardware) and reboot. The system should detect the sound device and re-install it)
    2.5 Finally download and reinstall the correct device drivers for your sound devive from the Toshiba web-site.
    2.6 If you still have no sound after all of the above then I would recommend a complete re-install of your system from the Toshiba Recovery CDs. and if that does not correct the problem then you will need to take it to a Service Agent for them to sort it out.
    HTH

  • When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can you please help me?

    When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
    Sincerely,
    Eric

    Run this when you have the problem and post the results here.
    EtreCheck
    This will tell us what is loaded

  • Please help iPhone 5 sound problems

    iPhone 5 sound problem: my iPhone 5 noise is only coming out thru the ear speaker and will not come out of any of the other speakers on my phone i say again it will ONLY come out my ear speaker it does it in games and in videos in music in everything! Ive reset the phone and went thru all the settings and everything to try to fix with no luck at all please help me!

    fdisk formated and reinstaled windows 3 times. fresh install each time i installed a sound card. so I dont think lingering drivers is the problem which also means dx9 has been installed fresh each time.also I have been dealing with this for nearly a month and I am at a loss.

  • Sound problem with my iPod touch! Need urgent help!

    I have an iPod Touch 8gb 3rd gen (2nd gen) and have owned it for a couple years. Recently I've been noticing some sound problems when I listen to music with earbuds/headphones. One of the earbuds will lose sound and won't produce music but if I twist the input plug it produce little or full sound but if it moves out of a certain position it won't produce sound out of that bud. I'm using Skullcandy Ink'd earbuds so I thought maybe since they arn't great it might be a manufacturer defect but I used them with my iPod Nano 2gb 1st gen and I could hear out of both earbuds perfectly. I even plugged in my iPod Touch into a car adapter so I could listen to my music through the car stereo and it went in and out of sound so I realize now it is my iPod and not  3rd party equipment I've been using with it that is the problem. Since its the iPod what is the exact problem and how do I fix it? I really don't want to use my old iPod since it doesn't have enough storage for my music now and I'm already getting something else for Christmas that I've been wanting for a while. Please help!

    If your car adapter works thru the headphone jack, the problem could just be dirt inside the jack.
    Try just putting in and out the headphone plug a few times. You can also try cleaning the jack, just don't use anything wet. Cotton swabs are also not advisable as they might leave lint and make things worse.
    To make sure it's not a oft ware issue, try to Reset your device.  
    Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off that shows up first).

  • HELP ME!!!Sound Problems!!!

    Hello!!
    I have sound problems with my Motherboards sound card..I have a KT3 Ultra2 motherboard.. I tried to install the alc650 sound drivers, and now i only get sound from the left speaker..WHY?? i have tried ewerything, to install the drivers again. tried to install windows XP again...can someone help me please..
    Thanks!

    This may be a stupid question but are you sure the speakers work?  Have you tried a different set of speakers?  Check the connections?   I hate to ask but I have to.

  • Sound problems on the Zen Micro HELP!!

    I bought a Zen Micro about a Month ago. It worked perfectly fine I enjoy it. But then maybe 3 weeks after I have sound problems. It's not my headphones i know that for a fact because I tried two sets of them. I think it's the Headphone port. Because everytime i move my headphone plug when it's inside the port the sound get's dull. I can still hear the music but the sound of the music gets ugly. I hope someone can help me with this PROBLEM

    Nbarretto,
    The number of players that are having problems when compared to the total number of players out there is very small. Consider that Creative sold 2 million players in the last 3 months. Taking into account that the Zen micro was a very large portion of these sales, you can see that the number of complaints represents a very small percentage of the players out there. Looking at a support forum can make even the most rock solid device look bad if you take only that into account.
    The good news for you is that there are lots of options available that can help you get a working player. I would suggest contacting support and seeing what they can do for you.
    http://us.creative.com/support/custsup
    Jeremy

  • Sound problem. help me pls

    Help me pls i have hp pavilion dv 7 1125ea and i dont find my driver. Itry lick this.
    1.install MS UAA
    2.install IDT audio driver but this driver give me this error... the hardware detected is not supported by this idt software package. the install will be aborted....pls help me and sorry for bad english
    I need for windows XP.  Ty

    Ordered system restore cd's.  Restored back to factory settings. My sound problem is fixed. I hope this helps you out.

  • Sound problems plz help answer my ?

    does anyone know if the texting sound problem is a bug or something wrong inside the phone? and did anyone hear anything about a new firmware update comeing out this week?

    thanks for all the replys
    The Apple Discussions Forum has had major problems for the last couple of days, so prompt replies are unlikely. Anyway, it all done by volunteers. Nobody here is being paid to help you.

  • Desperately need some help!! iTunes/Quicktime/iChat/Sound problems....

    So, yesterday, I was online, on google video, and when I pressed play on the video, there was no sound, but the video worked...the same was true on every video site i checked. My computer volume was at max, and I even tested the speakers to make sure they were on, and they indeed were.
    I thought that was odd...but then the problems really started.....
    After that, I clicked on my iChat icon. It bounced once, and did not open. The same thing happened when I clicked on iTunes. 1 bounce, and then nothing. I checked to make sure all of my iTunes mp3 files were on my computer....they indeed are all still here, bit nothing I can do opens iTunes. I've run disc utilities, and disc repair...according to that, everything is peachy-keen on my computer.....but iChat and iTunes STILL will not open, and there is still no sound on anything.
    Now, i'm leaning towards the archive and install option....or even just backing up what I want to save, wiping the drive, and starting from scratch.....but i'd really like to not have that happen.
    (and, as a side question, if all I want to save are images, several documents, and many mp3 files, would everything be okay if I just backed them up on an external drive, and then loaded them back on to my computer after reinstalling OS X?)
    Sorry about the length of this, but I am at my wit's end, and I have no idea what to do.

    by third-party, do you mean things I installed that are not manufactured by mac? If that is the case, I have microsoft office, Smart Music, Flip4mac, and Senuti.
    I got rid of Flip4Mac to see if that affected my sound problems, but it did not. So, as of now, my problem remains the same...

  • I have sound problem in My Cq40-144TU Laptop

    Hi,
    I have Cq40-144tu laptop. i am't hearing sound from internal speaker but sound is hearing from headphone. I have configured my system many time. Last got to shop and they also format it and reconfigured but still this problem is showing. 
    But I was hearing sound from speaker when i chat in gtalk and then i heared sound from window media player and other application also for 5 to 10 second only. every time some text is recieved i hear sound for 5 to 10 second.
    please tell me what is problem in My Laptop. i have window 7 ultimate operating system.
    Please help me sir

    What sound problem - no sound on anything, no sound on some apps ?
    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
    And for future info typing in all capitals is considered to be SHOUTING

  • Sound problems on ProBook 6550b, running on Win 7 Pro x32bit..

    I have been getting very similar sound problems on my notebook as posted by most: internal speakers work on original Audio HD drivers, but there is no sound when I connect external speakers or headphones. I up-graded the audio drivers to IDT HD Audio and I get sound coming from external speakers or headphones, but nothing from internal speakers.
    I have tried everything from reporting the problem on public forums, live help, and done this or that, but nothing changes. It's so very clear to me that it has to do with audio drivers, which don't seem to work appropriately to cover all aspects of sound output.
    I also, often, get this loud, weird, irritating noise and a frozen PC when I am playing music with the notebook, while on the internet. The best I do is not to do both at the same time. I have seen similar problems on blogs, but tangible solutions are NOT offered!!!! Please help...

    Audio Switching coudl be due to several reason. if you have tried latest audio drivers and latest Video drivers from hp.com, i suggest you to get audio board replaced for your computer.
    Hope it helps.
    Regards,
    Waseem,
    I work for HP.
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Regards,
    WW
    “I am an HP Employee“
    ***** Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

  • Sound Problems on iPad: how to fix, easy [video]

    Hi dear iPad user,
    Most people will, eventually, have sound problems: the cause can be complex as a 'miss-behaved' app that messes the sound engine or as simple as the iPad being forgotten on Mute/Volume Down.
    I used to help family and friends to fix their iPads' sound problems by sending them 'text' instruction steps... lots of times they ended up calling me on the phone...
    So I made a video (short: 1m40s):
    https://www.youtube.com/watch?v=FjBP-Ncj_fE
    It shows:
    how to unmute the sound (even if the side-switch locks the rotation of the screen)
    how to put volume up
    how to close all the apps (in the case there is an App messing with the sound system)
    how to reboot the iPad (ultimatelly fixes hard cases of messed sound system)
    What it won't fix: if you have a hardware problem...
    If you do all the steps and you get NO SOUND AT ALL, please, try also checking if you car listen sounds using a HEADPHONE (you know are working conditions). If you can listen to sounds in the headphone but no sound at all in the iPad's built in speaker, well, there might be a hardware problem and you should look for help on an Apple Retail Store or other official technical support available at your location.
    Hope this helps!
    Everson.

    UPDATE: fixing iPad Sound after iOS 7
    http://youtu.be/SDf1LDcE95Q
    (1min 36sec)
    It covers the basics:
    checking side-switch / mute / "Control Center"
    volume all up
    ...and also the worst cases:
    closing all apps (for rare cases when a single app might render the sound system instable)
    rebooting the iPad
    So, don't get desparete: try the things in the video.
    There are people who reported having forgotten an audio-bluetooth connection activated with a turned-off sound-system or speakers... or forgot Air-Play turned on... so be sure you disengage bluetooth and/or airplay.
    On the 'hardware side', dirty dock connector (30 pin) can make the iPad 'think' it is connected to external audio - if so, cleaning it with a dry toothbrush can fix. Also, moisture in the headphones connector can make the iPad switch to 'headphones' even without headphones connected, making it silent: check if you can hear things with headphones plugged in - if so, try gently inserting and removing headphones a few times and check if you get sound back to iPad's speakers alone.
    Good luck to everybody! Audio problems are quite common - fontunately they are easy to fix.

  • Pismo Sound Problems after Sleep in Tiger

    Hi all. New to the forums and returning to Macs after years of cursing Bill Gates. Picked up a Powerbook Pismo from a friend and have been having some fun with it, but I have one problem I can't solve. I replaced the hard drive (saved the old one) and installed Tiger and 1GB of memory on the machine. All seemed well until I noticed that the sound would not work sometimes after sleeping. The sound will usually return with a reboot, but sometimes I'll have to actually turn the machine off, and clear the PRAM to get the sound to come back. Sometimes, the volume and screen controls will both not work at all (pop up doesn't even appear when the keys are pressed), sometimes it's just that the sound doesn't work, but everything looks right on the screen. I've also had the sound and screen buttons not work only to have pop ups suddenly appear and the adjustments happen several minutes after I pressed the keys. So far I've tried:
    Clearing the PRAM
    Checked the Pram Battery (ok)
    Reinstalled Tiger (Still loses sound)
    Downgraded to 10.3 (problem persists, and seems worse)
    In system information on Tiger it says "there was an error when retrieving that information" when you click on the sound hardware.
    The machine is a 500mhz Pismo with a 48gig drive and 1 gig of Memory (133mhz, would that cause this sort of problem?)
    I have not tried going back to OS9 to see if the disappearing sound resolves as I don't currently have an OS9 disk.
    This sure seems like a software problem, but I'm starting to wonder. I really like this machine and want to get it to work! Help!

    Maxstang, welcome to Apple Discussions.
    Did you repair permissions after you installed Tiger? Have you updated Tiger to 10.4.11?
    Here's the Sound troubleshooting info in the Pismo Service Manual.
    No sound from speaker(s)
    1. Verify mute mode is not enabled (F6 on the keyboard).
    2. Check the volume setting in the Sound control panel.
    3. Verify no external speakers or headphones are plugged in.
    4. Reset PRAM.
    5. Make sure speaker cable is plugged into sound card.
    6. Replace sound card.
    7. Replace speakers (part of the top case).
    8. Replace I/O logic board
    Startup sound is heard, then no sound from speaker(s)
    1. Remove sound preferences from System Folder, reset PRAM,
    then restart.
    2. Perform clean installation of system software.
    Had the Pismo previously had OS X installed. There's a firmware update (Boot ROM version 4.1.8) that should be installed prior to installing OS X. However, when I got my Pismo with Tiger installed, the firmware was not updated (have since updated). However, I don't think this could be the cause of your problem, since I had no sound problems when the update was not installed.
    The PC133 RAM (which runs at 100MHz) should not be the problem. I have PC133 RAM in my Pismo.
    Since you replaced the HD, could you have disturbed the connection to the Sound Card. The Sound Card is located to the upper-right of the HD. Here's a helpful laptop site.
    Fix It Guides for Mac Laptops & Mini
    http://www.ifixit.com/Guide/
    The guides can be viewed on-line or you can download a PDF file.
     Cheers, Tom
    (='.'=)
    (")_(")

  • IMovie sound problem - a solution discovery

    After downloading a video in iMovie and completing all the processes steps that I wanted to include, I tried to burn this project in iDVD. A problem arose with the sound when I played the iDVD preview. The sound was grabbled and distorted. I contacted AppleCare and got several possible solutions, but none of these solve my sound problem. I even tried to send it back to my camcorder and use my older G4 computer to make a DVD. However, the program could not be transferred to my camcorder either.
    Now a strange discovery was found. On the sound line in iMovie (where I had recorded my voice program) was a small yellow dot. Yes, very small yellow dot. I wondered why this was there and clicked on it. The dot move up to the top bar where my video clips were stored. I thought maybe this had changed things, so I rendered the program to iDVD again and previewed it. The sound problem was gone. I successfully burn the program to DVD and found it was okay to view. I have shared this discovery with AppleCare and was asked to share this information in this discussion forum. I hope that others may benefit from solving a similar problem. I still don't know how the tiny yellow dot got on my sound line. If somebody knows, it could be interesting and helpful to avoid this problematic yellow dot. Good luck - Seapark36

    Welcome to iMovie Discussions!
    Thanks for mentioning this business of the "..very small yellow dot".
    This sounds like a 'Bookmark'. Bookmarks can be placed on the Timeline, where your video plays, along the bottom of the computer's iMovie display, by purposely - or accidentally! - pressing the Apple key and 'B'. Bookmarks let you jump instantly back and forth through your movie (..to the next Bookmark..) by jumping forwards to the next one with Apple and ']', or backwards to the previous one with Apple (..also known as the 'Command' key..) and left-square-bracket '['.
    They have, though, been known to interfere with proper playback when exporting (..'Sharing'..) to tape or to iDVD, so Karl's advice has been to delete all bookmarks when the editing's finished and just before 'Sharing'. All bookmarks can be instantly deleted by going to Markers on the top line menu and clicking Delete all Bookmarks.... (An individual bookmark can be deleted, once you've jumped to it, by pressing AltAppleB.)
    The little diamond-shaped dots look almost identical to Chapter Marker diamond dots, which you can create by clicking the 'iDVD' tab at the lower-right beneath the right-hand 'pane' of the iMovie window and then clicking 'Add Chapter'. That creates a chapter marker to separate a particular section of your movie when it plays back from a DVD you've burned.
    The Bookmarks and Chapter Markers seem (..to me!..) to have a very slightly different colour - maybe one's green and one's yellow: I don't know; I'm red-green colour blind, so I can't tell yellow from green, or green from red!
    So perhaps you accidentally created a bookmark by unintentionally tapping the Apple key and then the letter 'B'. Removing it, and all other bookmarks, is generally acknowledged to smooth the process of exporting (..'Sharing'..) a movie project.
    Thanks for posting your observation, and reminding us about how important it is to delete bookmarks before exporting!

Maybe you are looking for

  • Partner Profile disappeared

    Hi I was trying to extract data from APO system to within APO BW system. It was running fine for many months. One day, it suddenly failed. The error analysis says Partner profile not active. When Checked in WE20, the Logical system name is missing. I

  • Rules-based ATP

    Hi 1).How do you merge 2 confirmation lines into 1? In GATP 1).How do you merge 2 confirmation scheduling lines into 1? 2)In the ATP area, how is the requirement type determined for a sales order line?

  • Question re Music Notation Files

    Hi. How do i convert a music notation file (*.mus) to a format that Acrobat supports? Would it support MIDI or a format called all files (*.*)file? The (*.mus) file is from Finale PrintMusic, 2011 version. Anyone who has an answer, let me know as soo

  • Internal Software Error: .\AVTreeNode.cpp, line 25 when saving a project

    Hello, I am trying to work with Encore DVD 2.0 on Windows XP professional (SP 2). Until now with every project I try to make I see new error messages, and my whole work consists of trying to find work arounds. My actual project consists of five slide

  • WRT54G - Losing connection non stop

    I had DSL and everything was fine running with this router. I just switched over to Cable which the modem is a Cable/Phone modem. (Digital Phone crap). I am currently running my Desktop with Windows XP and my Laptop Vista. Both are hardwired. Anytime