Help standard function module

Hello,
In the java programs can I calls standard function module(no bapi, no rfc).
Can I have an example?
Thanks
Giorgio

Giorgio,
standard BAPIs or standard function modules cannot be called if they aren't RFC. You need to create another version of BAPI or module (as RFC) or extend them.
Best regards,
Vito

Similar Messages

  • IF statement in Standard function module PRICING

    Hi,
    In standard function module PRICING
    I found one if statement like this.
    if  xkomv-kntyp na '1$' .
    Plz tell me the meaning of thai '1$' value.
    Regards,
    Upender Verma.

    Hi,
         NA means Contains Not Any ..
         if xkomv-kntyp na '1$'  means .. xkomv-kntyp does not contain '1' or '$'.
         Read help on comparision operator 'NA'
    Regards,
    Srini.

  • Error in the SAP standard function module 'RSDRI_INFOPROV_READ'.

    Hello Experts,
    We upgraded from 3.5 to 7,0 support pack 17 .
    After upgrade we are getting error
      with return code 11 'Others´'.
    While debugging the standard function module we found that the standard method s_r_infoprov->read is being executed with the return code = 8 (inherited_error).
    Any suggestions?
    Regards,
    Vivek

    Not sure if the parameters provided were correct,you may wish to do a sanity check
    Input Parameters:
    1. I_INFOPROV - This will hold the Name of the Info Cube from where we need the pull the data.
    2. I_T_SFC - This parameter is in the format of Internal Table which holds the Character Info Objects we need to pull from the Source Cube.
    3. I_T_SFK - This parameter is also in the format of Internal Table which holds the Key Figure Info Objects which we need to pull from the Source Cube.
    4. I_T_RANGE - This is also in the format of Internal Table which holds the Selection criteria for which we need to pull from the Source Cube u2013 For example the Company Code u2013 001 and Fiscal Year Period u2013 001/2006.
    5. I_T_REQUID u2013 Selection of cube data based on Request Id.
    6. I_SAVE_IN_TABLE u2013 In case you need to save the data in DB table
    7. I_REFERENCE_DATE u2013 This holds the current date.
    8. I_AUTHORITY_CHECK u2013 This will hold the value u2018Ru2019, which is meant for READ.
    9. I_DEBUG u2013 This is for Debugging mode and holds the default value u2018Yu2019.
    Output Parameters:
    1. E_T_DATA u2013 This Output Parameter is of internal table format, in which we can mention the output fields (For all the fields mentioned in the Input Parameter, this output parameter will hold the values).
    2. E_END_OF_DATA u2013 Once the FM is executed successfully, this output parameter will hold the value u2018Xu2019, means extraction completed successfully.
    Hope it Helps
    Chetan
    @CP..

  • *Can we call a Standard Function Module inside a Zfunction module ?*

    Can anyone please help me know whether we can call a Standard Function Module inside a Zfunction module ?
    I tried the same (No syntax error) BUT when i activate the zFunction Module it throws the error:-
    +'' REPORT/PROGRAM statement missing, or program type is INCLUDE. " +

    Yes, I got the Answer -
    We Can we call a Standard Function Module inside a Zfunction module.
    But we need to make sure that the Function Groups are activated.
    FUNCTION ZFM_TEST_NESTED_FM.
    ""Local Interface:
    *"  EXPORTING
    *"     REFERENCE(EX_CONVERT_UPPER_CASE) TYPE  STRING
    CALL FUNCTION 'TERM_TRANSLATE_TO_UPPER_CASE'
      EXPORTING
      LANGU                     = SY-LANGU
        TEXT                         = 'gaurav'
    IMPORTING
        TEXT_UC                   = EX_CONVERT_UPPER_CASE
    EXCEPTIONS
       NO_LOCALE_AVAILABLE       = 1
       OTHERS                                    = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFUNCTION.

  • Is it necessary to use the standard function modules always?

    Hi All,
       Suppose i can retrieve the BUSINEES PARTNER ID from the table BUT000 with the help of 'BP_GUID' field through a select query statement. 
    Now is it necessary to use a standard function module to retrieve the same data. what about the performance? which is the better solution. to implement our own code or to use the function module available.
    Please someone clarify me about this issue.
    Regards,
    Sharry.

    If you'd ask the question in general it's obvious that there is no good answer as it always would depend on the circumstance. However, as you've posted your question in the performance tuning forum, let's look at your question in this context first. I think it's fairly safe to say, that in almost 100% of the cases a standard function module will not be as fast as any well implemented and custom tailored code. If in doubt, just try reading the code of the function module you want to read; most likely you will find lots of unnecessary fluff in there, often they read data that you don't even need.
    And as far as buffering is concerned, that can also be an issue. E.g. let's say you do a massive read of distinct business partners and you only need the data once for each partner. Obviously buffering is silly in this case and it might even slow down your program, because the implemented buffering is not necessarily well implemented. I've come across a few cases, where the buffer tables where standard tables with no efficient read access (so no sorted table or hash table) and once tons of data were buffered, it actually took a moment to look up if the record already was buffered (just to find it wasn't there yet).
    Now most of the times this slowdown is not an issue as the lookup is still fast compared to the (usually) prevalent database accesses with their slower IO timing. But another factor to consider is memory consumption and why buffer data in memory (and waste it), if you can't use the buffer anyway? So when I do use standard function modules, I usually try to see what they retain in global memory, to better understand if I need to call some initialization/clearing/refresh function...
    Note also that often you need to process lots of data, but don't find a standard function module for "mass access", so you need to read your object one by one. Obviously that's another good candidate for implementing your own queries, where you can process the data in packages.
    So what might be the reason to use a standard function module? Well, often it's required because the logic is so complex that it would take you too much time to implement it (not to mention that we often simply don't know all the logic that's coded in there). Another advantage is that you might get independent of the data model. E.g. for IDoc interfaces SAP switched in some release the tables where the data is stored. So if you had coded your own queries to get IDoc data, they wouldn't have worked after this particular release upgrade. The standard function on the other hand, checks both the old and new tables, so by using it you would have been fine.
    The one major caveat I'd give though is to always check whether the function module is released or at least documented to some degree. I.e. if it's not released, SAP won't support it and does not guarantee that the interface or logic stays the same. In my experience lots of functions I do want to use are not released (or documented), but I will still use them because they seem to be the best alternative in certain scenarios.
    Cheers, harald

  • Do we have standard function module or program to activate transformation?

    Hi Gurus,
    Do we have any standard function module or program to activate transformation in BI system? If yes please let me know or let me know how to proceed with to create custom program to activate transformation.
    Thanks,
    Manoj

    Hi Sven,
      Thanks for your help.
    Even I am facing the same problem, we didnt want to open the production system to activate the transformation also it take time to transport them every time from development
    can you please explain how to use these methods, what parameters to pass
    do you have a sample code, it will be of great help.
    use this methods
    cl_rstran_trfn=>factory
    cl_rsds_rsds=>if_rso_tlogo_general~get_instance
    l_rsds->if_rso_tlogo_maintain~is_active
    l_rsds->if_rso_tlogo_maintain~activate

  • Standard Function module for Creating Vendor?

    hi ppl
    i want to know that which function module gets call when we create a vendor from trans. code XK01, i.e. the standard function module SAP uses.
    Regards,

    Ravi,
    What you can do is that you can debug the normal working of the standard webdynpo. This will be helpful in solving the problem.
    Incase you need further clarifications, please let me know.
    Thanks
    Atul

  • Where-Used List: Modifying SAP standard function module

    Hi,
    We have decided to modify SAP standard function module SD_SCHEDULING. But before that, we need to understand what impact this modification will have in the system. We will also estimate the risks with this modification.
    Therefore, I have taken Where-Used List for this function module. We are aware that this list is not comprehensive.
    Do you know any other way we could use to understand better what impacts this kind of modification may have? My colleagues say that this is the only way.
    Thanks in advance for your help.
    Regards,
    Jarmo Tuominen

    Hi Jarmo,
    Try this
    1). Goto Se16 and check the contents of table 'CROSS'.
    2). Enter 'F' in the first selection screen field
    3). In the NAME field enter the Function module SD_SCHEDULING and execute.
    4). The list will give you where all the FM has been used.
    Kindly note this is almost the same as doing a where used list. The where used list will only work correctly if the 'Update Navigation Index' works correctly in your system. So just to ensure the result of your where used list you can follow the above steps. This does not require the Update Navigation Index.
    Hope this helps
    Cheers
    VJ

  • List of Standard Function Modules.

    Hi All,
    Where can I find a complete list of STANDARD FUNCTION MODULES called correspoinding to STANDARD PAR FILE's in Enterprise Portal 7 (2004s). For Example what is the Function Module called when I click on ESS-> Career -> Language Skills.
    Regards
    Saurabh

    Hello Sourabh,
        I hope this link wolud help u
    http://help.sap.com/saphelp_nw2004s/helpdata/en/dc/6b839a43d711d1893e0000e8323c4f/frameset.htm
    Reply me if you still need more Info
    award suitable points
    Cheers,
    C

  • Notes - Standard Function Modules long text functionality

    Hi All
    Need standard Function Modules for Notes (long text) functionality. I need to create a notes tab in dialog program, this notes tab has all formatting icons to enable create/upload/modify the text entered and passed to SAP standard text objects.
    Edited by: sharmalvn on Jun 29, 2009 4:34 PM

    Take a look at function modules:
    - SAVE_TEXT (saves text to an existing object)
    - READ_TEXT (read text from an existing object)
    - CREATE_TEXT (writes text to a new object)
    Hope that helps,
    Michael

  • Anay standard function module or report to read Allocation Cycle

    Hi
    I am looking for any standard function module / Report to read allocation cycle.
    Appriciate your help.
    Thanks
    Lakshman

    Hello Lakshman
    Using function module RK_AL_CYCLE_READ you can read allocation cycles.
    However, you will need additional fm's in order to read the entire cycle data.
    Regards,
      Uwe

  • Copying Enchancement spots from standard function module to Z fun module

    Hi All,
    I copied standard function module SD_BACKORDER_LIST to my Z function module . But i am unable to copy the enchancement spots available in the standard function module . please give me the suggestion to copy this to my Z function module .
    Regards
    R.Vijayakumar

    Hi Martin,
    A SAP note will soon be released about this (compatible back to 6.40)
    There is a light version available in 7.3 to transfer data between PFCG and ST01.
    There is an optional Rolls-Royce version available for Z-codes / functions and the import parameter specific checks. The trick is to keep the original context of the call and maintain the proposals to the RFC enabled entry point, and know whether the tcode triggered it or the external caller.
    There is a service delivered which is context sensitive (e.g. the message type of the IDOC determines the application authorizations needed for synchronous processing, so SAP cannot deliver SU24 reliable proposals and the ones they tried for the /SDF/ are very isolated..).
    You need a "common functions" role for the basic scenarios like you have for interactive SAPGUI end-users, and then you need a runtime analyzer to perfect SU24 context sensitively. You also need to distinguish between a local BAPI (context is tcode) and remote one (context is RFC protocol, or http protocol... etc)
    That comes with the SAP Note...  (it is not released yet. I will update this with the number in the next weeks.)
    --> Just a little heads-up and insight that there is some light at the end of the tunnel and you can even order it as a service from SAP to fix your Z-problems for you. The question happened to match that which I know SAP is working on.
    Cheers,
    Julius
    Disclaimer : I have done many such spagetti fixes in the wild and developed the tool and services for customer scenarios together with SAP from my experiences, it is one of my favourite topics --> the Rolls-Royce version with Z-functions, hard-wired external RFC clients and configuration scenario dependent checks includes consulting fees if you want SAP to secure your own scenarios for you. The tools help this, but you cannot fully automate or propose it fro SU24 in "factory settings".

  • Implicit enhancement to a standard function module.

    Hi everybody.
    I used an Implicit Enhancement to a Standard function module Customized_Message, at the starting of function module.
    Code:
    ENHANCEMENT 1  ZFK01_ENHANCEMENT4.    "active version
    If sy-tcode = 'FK01' and sy-CPROG = 'SAPMF02K' AND I_MSGNR = '230' AND i_arbgb = 'F2' AND I_DTYPE = 'I'.
      EXIT.
    ENDIF.
    ENDENHANCEMENT.
    The above is working fine, to the condition what i had given above code.
    But my question is, can i use a implicit enchancement to a Standard function module(Customized_message).

    Yes, but you should also be aware that 'F2' is a configurable message class in the IMG.  You should attempt to solve your issue in that manner first.

  • BDC program or standard function module to change data in PFCG TCode.

    Gurus,
    I have programatically change the validity date of SAP security role (TCode PFCG). Are there any standard function module available for this ? If not then does PFCG supports update vida BDC programming ?
    Regards,
    Rajesh.

    Cross-posting. Thread locked.
    Please read [the rules|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement].
    PS: Please clean up / follow up on all your hundreds of unresolved questions.

  • Any standard function module to read data from a cube

    Hi,
    I want to read data from a cube say XYZ, into an internal table. Is there any standard function module to do this? If so can anyone plz tell me what change should i make in the function module for my requirement.
    Regards
    BW Fresher.

    Hi R,
    Try function module 'RSDRI_INFOPROV_READ'
    ABAP Report RSDRI_INFOPROV_READ_DEMO contains an example of how the function module can be used.
    Udo

Maybe you are looking for