Help! surround mixer has d

I wonder if anyone can help or has had the same problem:
My surround mixer no longer appears. I get no error message, but instead of the mixer starting I get a grey vertical box down the middle of the screen. I have tried re-installing everything I can think of, but it is the same every time. My 'Mediasource' programs packed up a while ago too, but I can li've without those, but not the mixer...help!
I am running XP home, sp2, audigy 2 platinum...
cheers,
Dan

its sp2 i just found out or im prety sure after 6 months of messing with this im working on it now

Similar Messages

Can't run Surround Mix

Yesterday i updated SB Audigy drivers to version 6.0..36 through creative automatic updates and installed the patches for surround mixer, audioHQ and creative recorder.
Everything work fine except for surround mixer which doesn't want start.
I've italian version so the english tranlsation should be similar to this:
"An error occurred during the initialization of one of the mixer modules. Mixer will be closed."
Is there a solution to make Surround Mixer working again, or it is a well known problem?
Thanks

Good afternoon. I see that this thread hasn't got a response, but yesterday I updated drivers for my Soundblaster Audigy Platinum and encountered this same problem.
The surround mixer has stopped working and I get this error message:
"An error has occured while initializing one of the mixer engine. Mixer will now exit."
(The poor grammar is part of the error message, not my own.)
This prohibits me from controlling the volumes of the various inputs to the Audigy, and most importantly, from adjusting the individual input properties in the custom environments.
Any assistance would be appreciated.
Brian

Surround mixer prob

Hi, from the drop down menu in surround mixer i choose 4 speakers, however when i switch my computer off, wake up the next day and switch my computer back on again surround mixer has switched it back to 2 speakers, whats up with this? Its pretty god damm annoying that i have to go into surround mixer everytime and choose 4 speakers again.
I wouldnt have thought this would have anything to do with the speakers or the sound card, as this is the first time this has happened to me and i've been using the same setup for about 9 months. I have recently done a re-install of xp though, which leads me to think a setting in surround mixer or something is changing my speaker setup to switch back to default setting everytime windows starts.

I really doubt it's the soundcard fault cos often it's due to other software that also have the ability to change speaker setting and these are the one that's changing it. You can try using Speakerguard
http://www.snarksoft.com/
if not, since you have just reinstall XP, I would suggest formatting again and reinstall xp again. then install sound card driver/software first and see if the same thing does happen.

HELP! Surround Mixer Proble

Hi guys, I have an SB Audigy.
Unfortunately, my installation cd was ruined and i had to get a new Hard dri've.
I have successfully installed drivers and the Creative audio console, but i cannot find anywhere the original installation files for Surround Mixer. (ie, not the stupid little updates it has on the support page)
I need help finding a full version of Surround Mixer.

http://ordorica.org/index.php?id=63
Download Audigy 4 ISO. This will install on your soundcard as well.Message Edited by the_One on 0-5-2005 08:43 AM

Color issue with pdf from Indesign. I have a special cmyk mix for a bcard in Indesign. When I export the pdf the cmyk mix has changed Just started today 1.13.15 Running Yosemite 10.10.1 Any help on what to look for would be greatly appreciated.

I have a special cmyk mix for a bcard in Indesign. When I export the pdf the cmyk mix has changed Just started today 1.13.15 Running Yosemite 10.10.1 Any help on what to look for would be greatly appreciated.

Thank you Peter. Someone else must have been on my computer because I do not change the settings. You pointed me in the right direction.
Thanks again.
Patrick

SB Surround Mixer Volume Bind Keys/Quick K

Howdy,
I was wondering if anyone knows if it's possible (either with an external program or not) to assign quick keys or bind keys to functions within the Surround Mixer for my Audigy 2 Platinum.
For example, I have a Logitech keyboard with a scroll wheel on the side and I within the Logitech software it is possible to assign it to control the master volume, but for my purposes I would like it (or even some regular keys on the keyboard) to control the gain slider for the the Auxiliary 2 Input. This would be helpful to me, so I can mix the volume of my audio coming in via RCA into Aux 2 on the fly, while Im in a fullscreen application that is also running audio that doesn't take kindly to being alt tabbed - which makes it difficult to open the Surround Mixer Window every time I want to change something.
Any ideas would be appreciated, thanks.

cgo wrote:
- the Thinkvantage button.
It has no symbol on xev, and acpi_listen says:
button/prog1 PROG1 00000080 00000000 K
I have no idea what to do for that.
From [ibm-acpi-devel] ThinkVantage key on ThinkPad X61
Is the mask value for this key 0x00000080 or 0x00001018?
Neither. In the documentation, you'll see a table with an entry for
each key. The table shows the "ACPI event" code (0x1018 in your]
example) and the "scan code" (0x17 corresponds to that event).
The documentation mentioned above is the README of the ibm-acpi,
where you hav ACPI events and scan codes explained. But, that's low-level thingy.
To configure the ThinkVantage button, simply follow instructions from the How to get special keys to work. For example, Open an application
where you can find out keycode with xev and map desired action with xmodmap.
(On my T400, under X11 the ThinkVantage button generates event with keycode 156. You need to check yours using xev.)
cgo wrote:- the audio volume controls show symbols (X86AudioMute etc...) but they are not linked to alsa mixer.
If someone has some tips/clues, please share.
Check the ThinkWiki article above, there are audio buttons explained too.

How to make a decent surround mix?

I've never used STP, but I'm hoping you experts can help. I've posted this question in the FCP forum but got no respsonse. So I did a little more searching and realized this might be a better place for the question.
My goal is to take two-channel HD video, add a stereo music track, and produce something that sounds good in full surround. Is there any good tutorial on how I might make a modestly better surround mix? I'm not trying to win an Oscar here, or become a sound engineer. So simpler is better, please.
I've worked out a way to put surround sound into my HD movie, burn it to a DVD AVCHD using Toast, and get it all to play on a blu-ray player, Cool!! It looks great and has 5.1 Dolby Digital surround, all on a cheap DVD disk. I get about 30 minutes on the disk.
But now I realize I don't know jack about how to make it sound good. All I've tried so far is putting a stereo song into the surround speakers with the movie stereo in the fronts as usual. It's pretty cool, but it isn't exactly "immersive".
I think I might get a better result using an upmixing tool such as Upmix 1.1.1 from Cycling '74 (or is it KVR Audio?) to simulate 3D sound from my 2D source materials.
Has anyone tried something like this? Is it worth the bother? Any tips appreciated.

My surround experiments test results:
Content: Two stereo tracks, a movie and a song.
Objective: Make a nice surround mix, something better than sending both tracks only to the fronts
Tools: Soundtrack Pro, Compressor 2.3.1 I have no system for "live" surround playback and no software designed to simplify front-rear fades and 3D sound placement. To test any mix, I have to burn it to disk and preview it on my (calibrated 7.1) home theater system.
*Hold Fixed:* No change was made to the stereo pan of either stereo pair. In all tests I let Compressor create a center mix at -3dB and a LFE using its low-pass filter checkbox.
*Experimental Design:* I have just four levers to pull - the level of each stereo pair in the front and in the rear. To simply testing, I used just 3 levels, 0 dB (no change), -3 dB and off, -∞. Four variables at 3 levels gives you 81 total combinations. Since I have to burn to disk, I can't run all those. Many tests can be eliminated as nonsensical, eg. the one test with all levels at -∞. Further eliminating the combinations that give level totals that are obviously too low or too extreme, I was left with 8 mixes I actually tested:
Movie Music
_F / R F/R Comment_
1. 0 -∞ -∞ 0 Uncomfortable, too "obvious"
2. -3 0 0 0 music a little dominant
3. -3 0 0 -3 music too front
4. 0 -3 0 0 not bad, music more forward than #6
5. 0 0 0 -3 music too front
6. 0 -3 -3 0 my favorite - very smooth transition when music starts
7. 0 0 -3 0 music too rear, oddly
8. 0 0 0 0 result pending
Conclusion: It's possible to make a dramatically improved sound mix over the two-channel stereo that is exported by iMovie. A starting point is simply duplicating the front signal into the surround speakers. A slight fade - in my case the movie was reduced in the rear and music reduced in the front - gives a nice "opening" of the sound and some sense of 3D. I believe this preset could be applied blindly to many movie+music projects and give an acceptable result.

Creative Surround Mixer and PlayCenter, where to downloa

Creative Surround Mixer and PlayCenter, where can I download this 2 programs?
I dont want to recieve links with updates, just that programs. Please help me.

I have the same problem.
I have 5. system, when I turn on my computer my system play just with 2.0
I installed and uninstaled drivers but nothing, and my SURROUND MIXER is does't turn on because "CtDevcon.dll has returned an error" and I can't turn on system to 5. and turn on subwofer !!!!! I just can't listening music with 2 speakers and my subwofer is turned off.
Sorry, but my English is very bad... I'm from Lithunia and I don't now English very well. Sorry

No longer able to select speaker type in Surround Mixer (Audigy Platinum Win XP P

Hi, all. I have an Audigy Platinum. Normally I have no issues using my 5. speakers with this card; however, today I noticed my sound was "tinny" and the reason is that the surround mixer is locked on Headphones. I cannot click the arrow to change it to 5. surround or anything else for that matter. I've gone into Control Panel and unchecked the mute other speakers when headphones are plugged in option, but that hasn't seemed to help. Any other ideas?Thanks in advance.

Thanks for the reply. That did the trick.
Message Edited by ObiJuan on 05-29-20070:56 PM

How do I get my old Surround Mixer recording sources back?

I recently had my computer repaired where I basically had a complete overhaul. In the process they installed a second soundcard (the one that went with the new motherboard) alongside my original Creative Sound Blaster Audigy card (Sound Blaster Audigy Platinum eX). Before, when I would record audio into my computer, I opened the Surround Mixer software and in the record pulldown menu it showed all of the inputs as they relate to my Audigy interface (SPDIF, Aux In 2, Line In 2, etc.). Now when I open the Surround Mixer software, I only get generic options such as Analog Mix, CD Digital, Microphone, etc. and therefore I can't get any outside audio into my computer.
I figured the computer?was defaulting to the?new sound card so I disabled the onboard audio in my BIOS and then installed the Creative Sound Blaster Series 2 Driver. I clicked on the driver and it said that it needed to uninstall another driver that was already there. The install went a little funny and it got hung up a couple of times. Then, I couldn't get Surround Mixer to work at all so I went to the Creative website and installed Software Auto Update. I downloaded and installed all the critical components?but that also went a little funny. It took about three tries and it didn't seem like it actually finished installing, but when I checked on Auto Update again, it said that I was up to date and that everything had installed. I noticed at the beginning that it installed a new version of Surround Mixer but when I opened it later, it still had those same generic options, not the the ones that match my external interface.
What do I need to do to get my original settings back?
Message Edited by audiodrome on 04-30-2009 06:46 PMMessage Edited by audiodrome on 04-30-2009 07:32 [email protected]

>Re: How do I get my old Surround Mixer recording sources back?p audiodrome,
Is the external Audigy Dri've properly connected? Does the Plat Ex have the rear jacks? If so, can you record from the rear LineIn or mic jack and play sound files through headphones or speakers? What happens when you run the Creative Diagnostic? What does Device Manager show? Otherwise, yes, uninstall and reinstall the Creative software. If your install CD has a repair option, try that first. However, you may find you need to remove the Audigy from your PC, reboot without it, and then reinstall everything. Some Soundblaster cards don't play well with some integrated soundcards, so you may also want to disable the integrated soundcard in BIOS.
Message Edited by Katman on 05-04-2009 :00 AM

Live!Surround speaker setting not showing in surround mixer for SB Live Platinum

the Li've!Surround option for speaker settings in not showing in my Surround Mixer
i have:
Windows 2000 sp4
SB Li've! Platinum 5.
ASUS CUSL2
Sound Blaster Li've! - Li'veDrvUni-Pack (English) SBLW-XPWEB-W4-US 28-Feb-03
Installed the speaker preset for li've!surround but the only headphone, 2 speaker, 4 speaker, and 5. speaker shows up on speaker configuration of the Surround Mixer
i've played the AC3 files on the cdrom and Dolby pro logic surround, I get sound from all fi've speakers on my Denon D-850 w/ Dolby surround pro-logic
I can't use the surround mixer to test all the speakers, only front left and right speakers work on the test, i have to open to wav files directly to test the center speaker, the rear speaker test doesn't work from the wav file
My Denon system only has analog stereo inputs, so this is my only option for letting Sound Blaster know I have 5 speakers.
I've uninstalled all SB Li've software and drivers from the unipack, and reinstalled the orignal drivers and apps from the CD-ROM SBP5-CDSD-W-US MID : 32680 5-Sep-2000 and the Li've!Surround speaker setting reappears in the Surround Mixer.
Is the Li've!Surround setting no longer available in the new Surround Mixer in Li'veDrvUni-Pack (English) SBLW-XPWEB-W4-US 28-Feb-03 ?
Message Edited by klin on <SPAN class=date_text>2-2-2004 <SPAN class=time_text>06:4 AM
Message Edited by klin on 2-2-2004 2:45 PM

so I found this post...
http://groups-beta.google.com/group/...7?dmode=source
it seems Li've Surround is no longer supported in the new drivers
....so what would be the best setting to play ac3 files or DVD's through my receiver with only 2 analog inputs (left and right) available w/ Dolby surround prologic. Should I set it to 2 speaker or 4 speaker setting in the Surround Mixer in order to send the best signal to the prologic decoder on my receiver with 5 speakers (2 front, center, 2 rear)

Surround Mix with Logitech Z-5500 Digital

Hello,
I have a project for a 3D animation short movie, and I'll also make the score and sound effect for it, to make a DVD.
I don't have Logic Pro yet; I have Logic Express.
Is it possible to use a Logitech Z-5500 Digital set to do the surround mix with Logic Pro ? Using the optical digital out ?
I have a very limited budget, so I'm looking for the cheapest solution possible, with the best possible sound.
I'm waiting for a Mac Pro 2.66 with an ATI graphic cards (for Motion and 3D).
Thanks.
G4 1.42Ghz Mac OS X (10.4.7)

can't you pick the surround soundtrack in the control bar that is displayed close to the bottom of the movie window when you start one in iTunes? If theres no surround track, it cannot be done, furthermore, the speakers must be run from a surround home theatre receiver. Messing around with it on one of my desktops, I can choose the surround channel, but since it only has 2 built in speakers, I obviously won't get 5.1 (L/R front, center, L/R rear, and subwoofer). I agree iTunes should have preference that surround is automatically decoded when a surround track is available much like it's a preference in DVD player. I still haven't figured that one out.
Marty

Surround Mixer for Audigy and Windows 7?

Hello,
I've just installed Windows 7 and I see that the old XP Surround Mixer is no longer working.
I know that?Windows has a sound?mixer, but it is?really annoying and incomplete.
Is there a functional Creative Surround Mixer that I can use with Windows 7?

I would like answers to your question also. Since re-installing, & losing surround mixer, I have sacrificed?most functions with regards to 5./7. sound. As you say, Window's own software is sub-standard when using the card. I love the Audigy2 ZS Platinum and want to get it up and running to its full glorious potential.
?PLEASE PLEASE CREATIVE?PROVIDE US WINDOWS 7 USERS WITH A NEW UPDATED?VERSION OR A VIABLE ALTERNATIVE.
Yours in anticipation
Dave

Sound Audigy 2.....Microphone option is not showing up in Surround Mixer!!!!

I just updated the Sound Card Driver and when I finished with it and restarted my computer. It reset all my settings in Surround Mixer. I got them back to where i had them but not I can't get my microphone option back. I can only get What U Hear. The drop down menu is missing the microphone option. How can I restore this?
What started this all was from getting a new Logitech G5 keyboard. My sound was all crackling and some things was repeating itself while playing World of Warcraft. So i was told to update the driver, which didn't help but now my Surround Mixer is giving me heck.

Vista? Control Panel -> Sound -> Recording (tab) and make sure only ! device is set as the default, this should resoter your ability to choose the mic in the audio [email protected]

No surround mixer!!! soundblaster audig

Hello everyone,?I'm from Holland and i have a problem with surround mixer. I have a Creative soundblaster Audigy 2 with no install cd's. I have downloaded the newest drivers and my sound works. The onlything i can not use is the surround mixer. There is the mixer off windows but there i can not change the front, rear and center speakers. The EAX console i can use. I looked offcourse for solution and there is one. See http://www.tymes.net/swenum/fix-swenum0.htm. The problem is that i must install the Plug and Play Software Device Enumerator. The thing is, i dont know what Enumerator is or do. Can somebody try to explane this or translate this. I think this is the problem. What i have to know is the dutch for "Plug and Play Software Device Enumerator"?Can somebody help me please?Greatings,?Fred

Application and driver cd,
http://files.filefront.com/ISO+SB+Audigy+2+series/;5005420;;/fileinfo.html
Just select custom install and only install the apps you want, and make sure to uncheck the driver.

Help! surround mixer has d

Similar Messages

Maybe you are looking for