HELP: symbol netvision phone w/cisco 350

Hello
I am having trouble setting up a symbol netvision phone with my cisco ap 350 that is running 12.01T. Basically, when the phone powers up it finds the SSID for my network (if i enable the broadcast SSID). It does not seem to get an IP Address/mask. It constantly displays "No Network". I have read the caveats for this release...there is mention that the symbol phone may display this message and there is no workaround present. If anyone has a working config on the AP, please email me at [email protected] Also it would be good to know if anyone has gotten this to work with release 12.01T. I have symbol extensions enable and the preamble is set to long....Thanks!

I think the only thing you can do is to use Cisco Aironet 1100/1200 AP,instead of Cisco 350 series AP.
This isssue is not present in 1200 and 1100AP.

Similar Messages

Symbol Netvision Phone w/Cisco 1200 series Access Point

I am running 802.11b access point my phone can associate and get an ip address from my call manager but I keep getting "not registered" "registered". I and then I lose association to the access point. I have 2 vlans on one access point one for voice and one for data. Please let me know if someone has a work around or a fix.
Stan

Stan,
Sounds like you have an interference problem.
What did your site survey show up in terms of other AP's and overlapping coverage areas ? Try a new channel that has the 2 channel separation from other busy channels and maybe even try a new/better placement of the AP
effectivly what you have now is the equivalent of pulling out the cable and plugging it back in constantly on a standard IP phone this means you will not be able to make calls
What firmware you running on the AP ?

Transfer VOIP Calls Between Cisco Desk Phone and Cisco Jabber For IPhone 9.5

Does anyone know how to transfer an active voip call from a Cisco IP Desk Phone to Cisco Jabber for IPhone? I can transfer a call from Cisco Jabber for IPhone to my Cisco IP Desk Phone no problem. I put the call on hold and then click "Resume" on my Cisco IP Desk Phone. However I cannot do the same but the other way around. If I put the call on hold on my Cisco IP Desk Phone, I see "no active call" on my Jabber client. The only information I could find slighlty relevant was using the Mobility Key/Remote Destination Profile feature however this defeats the object as this will forward to an external number, e.g. mobile and I just want to transfer the call within the VOIP environment between the two devices that are using the same directory number.
I am using Cisco Call Manager 9.1(2), Cisco Presence 9.1 and Cisco Jabber for IPhone 9.5.
Any help would be greatly appreciated.
Kind Regards,
Paul Parker.

Did you ever find an answer to this ?
I am seeing the same behavior and trying so see if I can put calls on hold and pick them up both ways also.
The only answer I seem to have found is to use park instead
That would/should work but I would just prefer to hold/unhold
Just not sure why we would not be able to hold/unhold on what is essentially a "shared" line
Does anyone have this working for them ?

CISCO 350 Wireless LAN Module on Solaris

I am running Solaris 8 (6/00) for Intel platform with xFree86 version 4.0.3 on my laptop. My CISCO 350 PCMCIA Wireless LAN module work cannot be used nor detected in Solaris. Can anyone help me with that?

Are you running any other Vm's on the host server?
Are they working? Did you enable your BIOS to support VM?
Then with regards to the install make sure you follow the guide as it can get tricky.
I forgot to add Promiscuous personally. Make double check you Network Backing. I am not running a VM anymore - just recalling where I had issues.
http://www.cisco.com/c/en/us/support/docs/wireless/virtual-wireless-controller/113677-virtual-wlan-dg-00.html

802.1x, enterasys roamabout R2, cisco 350 aironet without win2k active dir.

Can I set up a win2k 802.1x client authentication (win2k OS) using a cisco 350 aironet adapter via a roamabout r2 AP and get authenticated with a cisco ACS 3.0 radius server without having a win2k active directory domains ( i guess without using certificates)? I'm currently still using NT domains and having a WinNT PDC which I believe it will be a hassle to migrate win2k. If so, are there any documentation out there that can help me?

802.1x with alcatel phone with cisco acs 5.0

Hi All, can any one has done the implementation of 802.1x with alcatel phone where pc will be behind the phone and cisco switch ports are configured as trunk. Trunk native vlan is data vlan for pc and trunk carrying voice vlan.
when trunk mode is enabled I can not configure 802.1x on trunk interface. does any one help me to get rid of this situation..
Thanks

Hi,
Did you find any solution?. Did you tried with the command switchport voice vlan?.
Regards,
Mauricio

Any one using/deployed Telematrix phones with Cisco Call Manager

Any one using/deployed Telematrix phones with Cisco Call Manager

Yes, it does:
Cisco Unified IP Phone Series 7900
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp51474
Config on CUCM itself is no different from any other phones neither other requirements like DLUs.
Of course you should already have APs for connectivity.
HTH
java
if this helps, please rate

Audio drop on Spectralink Wireless IP Phone with AP1200/350

I am currently using spectralink WLAN phone with Cisco AP1200/350,
I found audio would be dropped. It is caused by spectralink phone would
re-authenticate/re-associate AP many times in a short period time, Every time
it would casued audio dropped.
Any one experienced this kind of problem?

On a recent installation, we had terrible voice quality problems with CallManager-controlled Spectralink phones associated with AP1200s. The wireless LAN was in great shape for all other devices, and everything else like the SVP server was in good order.
We then set the "Data Beacon Rate" (DTIM) to 2, in accordance with Spectralink's recommendations. Everything started working well. I cannot tell you much about what that parameter is or does, but it worked for us. If you search Spectralink's website, there are PDF documents with recommended settings for various Cisco access points.

Recording for Cisco IP Phones and Cisco C90 Codec

Hello
We are looking for a solution that is capable to record both Cisco IP Phones and Cisco Codec C90.
We are using CUCM 9.X for IP Phones and VCS 7.X for Cisco Codecs.
Is their any third party solution available for both the requirements or do i have to go with TCS and any other third party recording solution.
Thanks & Regards
Aniket Patil

My reply may be too late to be of any help to you, but for the benefit of others:
Be sure you understand the different types of PoE out there. The Linksys PoE switch only supports the newer IEEE 802.3af PoE standard.
The 7940, 7960, 7905 and other older Cisco phones only support Cisco pre-standard PoE and thus will not work with the 802.3af Linksys Switch.
To use this switch, you will need to make sure you are using the newer 7070, 7961, 7941 phones with support both pre-standard and 802.3af PoE.
All the best,
John

Hi, I have an e-mail account no longer valid, I need to move my contacts to a new e-mail account and delete the old one. How, help?? Phone is a 3GS

Hi, I have an e-mail account no longer valid, I need to move my contacts to a new e-mail account and delete the old one. How, help?? Phone is a 3GS

So the answer to my question is yes - from an old Exchange account that was provided by a previous employer.
If so, you can't.
You can't merge or transfer contacts that were synced over the air with an Exchange account with another account, and the same for syncing the contacts direct with a supported address book app on your computer. This is how most employers want it.

My iphone 3g is not charging and the middle button has stoped working please help. My phone has no power now

My iphone 3g is not charging and the middle button has stoped working please help. My phone has no power now an i need help

For a broken home button you can find your options here http://www.apple.com/support/service/

Hi help unlock the phone happened after we installed a new programa we can not get the activation password and ID, I know and still does not stop the phone bought in Israel and what documents should be sent to confirm that my phone Please read through the

hi help unlock the phone happened after we installed a new programa we can not get the activation password and ID, I know and still does not stop the phone bought in Israel and what documents should be sent to confirm that my phone Please read through the help

What I am saying is ..........
The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship with the Carrier and then follow the Carrier's process to unlock
With a PAYG it usually means adding a specified (by the carrier ) amount usually £15 /£20 depending on the carrier
This is how O2 function and according to Gemma this is how Vodafone work

HT1386 my iPhone was backing on my phone the iTunes symbol is there and the plug symbols the phone freeze an i wont open back up what can i do

my iPhone was backing on my phone the iTunes symbol is there and the plug symbols the phone freeze an i wont open back up what can i do

http://support.apple.com/kb/ht1414

Please help me my phone which is nokia c6 01 has p...

please help me my phone which is nokia c6 01 has problems of USB.when it is on i see a message on screen which is : connect USB cable to device and when i press ok the moved away and the message also back to the sreen please help me

Hi bigbow,
Welcome to Nokia discussions board!
In order to fix this issue, I advise you to perform a soft reset: type *#7780# on your phone's keypad. The default lock code is 12345. If the issue persists, perform a hard reset. First of all, back up your data using Nokia Suite. Once your data is fully backed up, type *#7370# on the keypad.
Let us know how you get on and feel free to post any other questions you may have.
Regards,
astra2025
Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Never once has my phone updated without deleting everything. It says "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes. I can't call for help because my phone is frozen on the screen with iTune

Never once has my phone updated without deleting everything. It says "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes. I can't call for help because my phone is frozen on the screen with iTunes. On line live chat won't chat until I give them my serial number which I can't get to because its frozen and can't call for the same reason!! Omg! Someone please help me!?

Morning AppleHlumamkhululi,
Thanks for using Apple Support Communities.
In most cases, the connected iPod needs to be restored.
For more information on this, take a look at this article:
iTunes has detected an iPod in recovery mode - Use iTunes to restore
http://support.apple.com/kb/ts1456
Best of luck,
Mario

HELP: symbol netvision phone w/cisco 350

Similar Messages

Maybe you are looking for