HELP - Syncronize two panels with scroll

Hi, I need to syncronize two panels group in mode scroll.
Ex: When the user moves the scroll in one panel, the other panel will have to move automatically. Any idea?

thank you again.
http://www.robotduck.com/content/articles/director/spriteBasics/scrolling/horizo
this is not working.
"duckets" <[email protected]> escribió
en el mensaje
news:ekpiil$8os$[email protected]..
> Increasing your frame rate won't help because you're
trying to do your
> movement
> within this repeat loop:
>
> repeat with D=1 to 70
> sprite(1).loch=sprite(1).loch+1
> end repeat
>
> That's not the right way to go about smooth scrolling,
as you've
> discovered.
> It's doing a large jump because you don't see anything
until the repeat
> loop
> has finished execting.
>
> Here's a demo movie which uses the behaviour example I
provided above
> (with a
> small bug fix, I confused left and right in one place!):
>
>
>
http://www.robotduck.com/content/articles/director/spriteBasics/scrolling/horizo
> ntal
>
>
>
http://www.robotduck.com/content/articles/director/spriteBasics/scrolling/horizo
> ntalSteps
>
> hope this helps,
>
> - Ben
>
>
>
>
>

Similar Messages

PLEASE HELP. Two computers with the same External IP Address

I have two computers with the same IP address which is causing problems. I tried to ipconfig/release ipconfig/renew but I get the error "No operation can be performed on a Local Area Connection* 11 while it has its media disconnected.
I tried resetting router/modem, made sure "Obtain an IP address automatically" are all enabled. DHCP is enabled.
Two of the computers have the same one and the other IP is completely different (not 1 or 2 off). When I open the router settings and click DHCP Reservation it shows the IPs 1 number off and all different like you said. i.e ***.***.*.106, ***.***.*.107,
***.***.*.108. But with the proxy service I'm using, when trying to allow each computer to use them it shows different IP addresses than what is shown in the DHCP Reservation.
If I clone my MAC address the identical IP of the two computers changes but they'll still share the same IP. The third doesn't change.
I tried ipconfig /release - ipconfig /renew - ipconfig /flushdns nothing yet. Not sure about your #2 and #3. And I just updated my firmware.
Anyone with expertise? Thanks.

Cyber_Defend_Team and ZigZag3143x I powered down all three computers and turned off/reset the modem and router.
I restarted them one by one and after, the two computers with the conflicting IP address changed their IPs but their IPs are still conflicting. The third computers IP stayed the same.
What else can we do?

Help finding Mac screensaver with scrolling text (Windows Marquee-esque)

I have been searching the internet somewhat intensely for a scrolling text screensaver for my Macbook. I found an Apple download called "message", but that is wayyy too fancy for me. I can barely even see the text with all of the crazy fonts and weird zooming. The emphasis is not on the text for that screensaver.
Something like the Windows Marquee would be fine, though I am sure somewhere out there is a tricked-out version for Mac. I would just want to be able to read the text clearly, as I intend to use the screensaver to help me to memorize some text.
Maybe I am overlooking an obvious screensaver already loaded on the Macbook, but I am surprised that Tiger does not come with such a screensaver. Any suggestions and links? Thank you

I think you should be able to find something that works for you using Quartz Composer. As an example, here is a link to someone else that was working on horizontal scrolling text. I don't know if their project got completed (or if it's currently included in Quartz Composer) but the .qtz file on this page will load in QuickTime so you can see the results as of this posting.
http://www.mulle-kybernetik.com/weblog/2005/05/towardshorizontal_scrollingi.html
You get Quartz Composer by downloading the Xcode tools. I'm looking through the example libraries now to see if there's something you could use in the current examples.

Please Help! Two problems with my iMac at once a week b/4 finals!!!!

First I'd just like to mention that I have no idea which OS X I have so...yeah, sorry. I was depending on this computer to work for my class finals. Anyway, on with the problems.
My school is getting all new computers next year, so they are selling all of their iMacs for ten dollars each. Like an idiot, I bought one. And...so did my brother. But anyway, I got it home and started it up and all that came up was the traditional BIIINNNNGGGG, a white screen(for a second), then a gray one. This little icon comes up in the middle that you can't click on(the cursor doesn't come up)but it's purple and has a little cartoon face on it. This icon only comes up if you are not pressing any keys or click/moving the mouse.
So I went back to school the next day and asked what was up, and they said that they completely wiped the computer and that I would have to buy new OS X install software. Okay...so I went to my computer teacher and he had a few sets of OS X install software.
I brought it home and turned on my computer. I put in the disk that said OS X Install and it went in. The computer whirred for a bit, then spit the disk back out. So I decided to try a different disk because I thought that maybe the computer already had the contents of that disk on it. I put in the Applications disk, and now it refuses to come out. I have tried plugging the keyboard into different ports(there are two, with two others on the keyboard itself for the mouse) and everything. I looked inside through the little slot(discs go right into the computer-no hard drive or disk tray that slides out) on the front and the disc is spinning but nothing is happening.
Please help me with both my wiped computer problem and my stuck disc problem. I have tried to give as much detail to help anyone who can help me. Please, WHAT CAN I DO?!
iMac Mac OS X (10.0.x) I have an OS X. No idea which one...
iMac Mac OS X (10.0.x) I have an OS X. No idea which one...
iMac Mac OS X (10.0.x) I have an OS X. No idea which one...

The full retail install disks are available here and at any Apple Store and many computer retailers. Also, check the system requirements. Be sure your Mac has firewire and enough ram to run Tiger. At this point you might be able to find the disks at a slightly discounted price because of the coming release of 10.5 Leopard. But be sure it is the black disk, boxed version if possible.
EDIT: And the install disc for Tiger is a DVD, so be sure your iMac has DVD.
This may help to narrow down the model iMac you have.
-mj
[email protected]
Message was edited by: macjack

HELP-40GB i-pod with scrolling click wheel

ok first of all, i got this new computer. I dowloaded itunes onto it. I want to plug in my i-pod into my new comp but im afraid that all my songs will be deleted. I have all my songs on my other computer, but the other computer isnt working. I also need to plug it into the new comp because a little folder with the ! comes up every once and a while. Also, my i-pod begins to play a song then it stops and it goes to the next song, this is related with the menu icon and the !. Now all of a sudden i press the MENU button and the apple logo pops up then it just turns back off. WHAT DO I DO? i want to keep all my songs, but at the same time im afraid that if i plug it into the new comp all my songs will disappear. Also why is my i-pod just shutting off when i turn it on?
I-pod with the scrolling click wheel Windows XP

The first thing that anyone is going to suggest to you in respect of the folder and ! error is to reset your iPod and/or restore it. Restoring the iPod will erase anything that's stored on it and return it to factory settings. You may not have any choice but to do this.
http://docs.info.apple.com/article.html?artnum=61003

Syncronize two Macs with iTunes

Hi people,
anybody here, who knows if it is possible to synchronize the songs and playlists in iTunes on two Macs? I have a Power Mac G5 running in my office (sometimes downloading songs here) and an iBook G4 (sometimes downloading there) and it really annoys me, to make a TextEdit file or anything to copy the downloaded songs manually. Is there a feature who provides that kind of Synchronization?

Dirk:
Unfortunately, there isn't an automatic way to sync your two library.
If it's just a matter of capturing music and playlists that you've added, you can always export either the specific playlists (iTunes>>File>>Export Song List) or the entire iTunes Library (iTunes>>File>>Export Library) to .xml files, then transfer them (by email or network connection) to the other computer, and bring them into iTunes via the Import command (iTunes>>File>>Import).
If you want to sync up your metadata (playcounts, date played, etc), there isn't anything that will merge the contents of the two libraries into a single unified file.
Lita

HT1373 I have a new Ipad with retina display but two issues with itunes 1) I can not syncronize films&music with the library on my mac and 2) When I download music or films from itunes to my ipad from itunes store the download never finishes. Any help??

I have a two problems with my new Ipad 2 operating system iOS 6.1.3
1) I can not syncronize with my itunes purchaces that I have on my mac book pro (operating system mountain lion)
2) When i purchase items from itunes store the downloads never finishes
I have tried starting and re-starting. Resetting the Ipad to original settings and non of this have worked. Any idea to what I should do?
Thanks a lot, Josephine

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

Hi, I need help with scrolling

Hello I am Kevin Jin, I am working a huge project acually not that big, but I need help with five things, i mihgt have more things in my mind but here it is
1. I need help with scrolling like where you have buttons for example or press on a navigation bar tab, then it goes to that specific pace of the page, for a one page website, for example some sites you press on contacts and gose down to the bottom of the page where the contacts place is located, not opening a new link.
2.Second also I need help with navigation bar, where it fallows the scroll as it gose down, like for example when it is html the object is fixed to the top, and when you scroll down it will fallow it it,
3.I need Parallex scrolling where you can have the timeline or animations run while you scroll in the meantime and have animation running all the time, for example the infographic site where the bees are fluying but still have seperate animations while you scroll
4.I am so sorry i have two more to go, i appreciate your help, I would also like to ask if like looping each animations sperately, not looping the whole timeline, can it be possible to loop an animation while you have all the interactivity witht he site like looping seperately all the time, without interfeering with all the other animation
5.I also are wondering if you can create multiple pages on one animate project, like multiple pages with html
I just moved on to edge animate from html, and html was also beirf learn for me and mostly i was doing design work, and i thought getting out of graphic river and moving on the theme forest would be a better idea for me, thank you guys so much of the help and add me on skype : kevin2019170 or add me on facebook ; [email protected] or graphicriver, www.graphicriver.net/user/phantomore I would appriciate if you just would like contact me through SNS since I have that in hany 24 hours long, but the thred will also do, thank you doo much foryour help,
P.S, I want also all the five things to work on one aimate project not interfeering with other ideas liek all five questions i had should run on one site,
THANK YOU SO MUCH FOR YOUR HELP AND I APPRICIATE YOUR HELP!

1.
write this code in your button Click
$('html,body').animate({scrollTop: sym.$("Your Symbole Name Here").offset().top}, "slow"); // scroll to the top of that symbol name
Or :
$('html,body').animate({"scrollTop":"600px"}, 750); // Higher value means slower , scroll to top page
1 and 2 see this post http://forums.adobe.com/message/5531344#5531344
3 use edge commons plugin http://www.edgedocks.com/edgecommons
4.just put the animations behind eachother so when 1 is done, start with the animating the other symbol/div
5. i thin its best just to make for every page a new project or make the site in muse.

Scrolling slow in a panel with 300 images

Hi,
I am using a panel which contains about 300 images (small icons).
I covered this panel with a scroller, and when scrolling, it's very slow.
when there are less images (about 50), it scrolls smoothly.
Any suggestions ?
<s:Panel id="src"
                               skinClass="SrcSkin"
                               dragEnter="trashDragEnterHandler(event);"
                               dragDrop="trashDragDropHandler(event);"
                               bottom="{bottomBar.height}" width="100%" >
                    <s:Scroller width="100%" height="100%" id="srcScroller" >
                              <s:Group width="100%" height="100%" id="aaa" verticalCenter="0">
                    ADDING 300 IMAGES HERE AT RUNTIME....
                                        <s:layout>
                                                  <s:TileLayout verticalGap="-50" horizontalGap="11" />
                                        </s:layout>
                              </s:Group>
                    </s:Scroller>
          </s:Panel>

Try using a list with itemrenderer for image. Scrolling performance will imporve as the list recycles its renderers.

Problem with scrolling a panel containing an image

I am having a problem adding scrolling capabilities to a tabbed panel containing pages containing an image. In my program, I have a class called ImagePanel that extends JPanel and contains an image read from a file. In another class, I create a tabbed panel and add to it ImagePanels.
The problem I'm facing is that the pages added to my tabbed panel contain scroll bars, but these scroll bars are not scrollable (i.e. I cannot use the bars the scroll and see the missing parts of the image).
Any help on this manner is highly appreciated.
The code is shown below:
JTabbedPane m_pathwayTabbedPane = new JTabbedPane();
ImageIcon overviewImageIcon = IconLoader.readImageIcon(pathway.gif);
ImagePanel overviewPanel = new ImagePanel(overviewImageIcon.getImage());
JScrollPane graphcrollPane = new JScrollPane(overviewPanel,
ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS,
ScrollPaneConstants.HORIZONTAL_SCROLLBAR_ALWAYS);
m_pathwayTabbedPane.addTab(StringManager.OVERVIEW, graphcrollPane);

import java.awt.*;
import java.io.*;
import java.net.*;
import javax.imageio.ImageIO;
import javax.swing.*;
public class ScrollingImages
    public static void main(String[] args)
        String[] fileNames = {
            "images/bclynx.jpg", "images/mtngoat.jpg", "images/redfox.jpg"
        JPanel panel = new JPanel(new GridBagLayout());
        panel.setBackground(Color.black);
        GridBagConstraints gbc = new GridBagConstraints();
        gbc.insets = new Insets(5,5,5,5);
        gbc.gridwidth = gbc.REMAINDER;
        for(int j = 0; j < fileNames.length; j++)
            panel.add(new ImageComponent(fileNames[j]), gbc);
        JFrame f = new JFrame();
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.getContentPane().add(new JScrollPane(panel));
        f.setSize(400,400);
        f.setLocation(200,200);
        f.setVisible(true);
class ImageComponent extends JPanel
    Image image;
    public ImageComponent(String fileName)
        loadImage(fileName);
        setBackground(Color.black);
    protected void paintComponent(Graphics g)
        super.paintComponent(g);
        int w = getWidth();
        int h = getHeight();
        int imageWidth = image.getWidth(this);
        int imageHeight = image.getHeight(this);
        int x = (w - imageWidth)/2;
        int y = (h - imageHeight)/2;
        g.drawImage(image, x, y, this);
     * For the JScrollPane which will inquire about our size
     * which it needs to properly set its scrollbars.
    public Dimension getPreferredSize()
        return new Dimension(image.getWidth(this), image.getHeight(this));
    private void loadImage(String fileName)
        try
            URL url = getClass().getResource(fileName);
            image = ImageIO.read(url);
        catch(MalformedURLException mue)
            System.out.println(mue.getMessage());
        catch(IOException ioe)
            System.out.println(ioe.getMessage());
}

Hey, I Upgraded from 7, to 8. I'm using a Powerbook G4, with Mac OS 10.5.8, MY question is: im unalble to click on the channel strip to add plugins. actually, I cant click on a lot of options, mainly things with scroll down menus ie... busses, aux.. HELP!

Hey, I Upgraded from LOGIC 7, to 8. I'm using a Powerbook G4, with Mac OS 10.5.8, MY question is: im unalble to click on the channel strip to add plugins. actually, I cant click on a lot of options, mainly things with scroll down menus ie... busses, aux.. HELP!

Hey, I Upgraded from LOGIC 7, to 8. I'm using a Powerbook G4, with Mac OS 10.5.8, MY question is: im unalble to click on the channel strip to add plugins. actually, I cant click on a lot of options, mainly things with scroll down menus ie... busses, aux.. HELP!

I have two problems with my 2012 13" MacBook Pro. 1. Gray screen shows at startup 2. Randomly disconnects from network. Any help will be greatly appreciated.

I have two problems with my 2012 13” MacBook Pro.
Gray screen shows at startup
Randomly disconnects from network.
Any help will be greatly appreciated.

First, open Terminal in your Utilities folder and paste this into the prompt line:
sudo update_dyld_shared_cache
Press RETURN. You will be prompted to enter your admin password which will not be echoed to the screen. Press RETURN again.
Next, boot the computer into Safe Mode.
Next, do the following:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Need help with inserting frame with scrolling images

Hi,
Im a beginner and need help putting a single box/frame with scrolling images in the middle of my layout, so that when viewed in browser, the header and footer remain in place, while the images and info in the frame in the centre of the page can be scrolled down/up?

You can use an iframe element <iframe src="" width="" height="" scrolling="yes"> though if you're concerned with crawlers you should avoid frames as much as possible.

Two probs with my imac need help with

Hi all I bought my first mac for the wife but we have two probs with it we cant get on top of
One is every time we try to access her mac that is on the same network it asking for a password
But none of the pcs have a password on
And the second prob is the mac losers sound on email but we are not on an imap account
So I have read that it is something to do with the idle setting but we can not find the settings
Can anybody help and I must say the mac is the best PC I have every used that's if I can get the wife off it

al22,
You have 90 days of free AppleCare telephone support. If your machine is within the 90 days or you have already bought AppleCare (STRONGLY recommended) give them a call. The support is excellent, nothing like what you are used to with a PC.
Because you did not complete your profile we have no idea where you are located, what machine you have or the version of OS X installed. Please complete your profile, you can find it under Your Stuff in the upper right.
http://support.apple.com/kb/HE57

Two Settings Manager panels with different settings???

Hello,
When I rt-clk in a flash video and choose settings I see different selections chosen that when I go to the Adobe web site Settings Manager. Not just different tabs as in local vs global but diffent choices for the identical options.
Window 7 SP1 all updates as of 04/15/2014
Your Flash Version
13.0.0.182
Your browser name
Google Chrome
Your Operating System (OS)
Windows (Windows 7)
I also tried FireFox 28.0 and IE 11 and have same behavior.
Which is the one that will be used by my system?
Is there a local settings file that may be corrupt?
Thank You,
Steve

Thanks Mike.
This is still a little confusing. I wasn't clear enough. The two panels I am referring to are the same and look like your second or EACH set. One is from the Adobe web site, "Settings Manager" not my control panls. So I can invoke three different controls for my Flash settings.
1. right click in a Flash object while using a browser.
2. access: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager.html# 117118
3. control panel Flash Player (32bit)
I thought the process worked like this. The control panel provides the starting settings for any browser Flash object and on a per use basis of some sort we can change the browser Flash settings on a per use and per site basis. If we don't then the control panel rules are in effect.
I will consider the web site (2) to be a malfuntioning site and hope it does not do anything despite what it says.
Steve

HELP - Syncronize two panels with scroll

Similar Messages

Maybe you are looking for