Help system hang out after i installed new video card

i bought a computer a week ago. and i bought a ati radeon 9250 graphic card (256MB pci). after i installed it, my computer loaded to windows fine, but wheni tried to do anything its frozen . i couldnt do anything
here is my computer
Processor Brand: Intel
Processor Class: Pentium 4 Processor
Processor Number: 631 with HT Technology
Processor Speed: 3.0 GHz
Front Side Bus: 800 MHz
L2 Cache Size: 2 MB
System Chipset: VIA P4M800 Pro
Memory Speed: PC2-5300 (667MHz)
Memory Type: DDR2-SDRAM
Installed Memory: 512 MB
Maximum Memory: 2 GB
Memory Slots Total: 2
Memory Slots Available: 1
Hard Drive Capacity: 250 GB
Drive Controllers: SATA-150
Rotational Speed: 7200 RPM
Optical Drives: Double Layer DVD SuperMulti Drive:
Create a DVD+R DL at a maximum 8X Write speed
Create a DVD-R DL at a maximum 8X Write speed
Create a DVD+R at a maximum 18X Write speed or a maximum 8X Rewrite speed
Create a DVD-R at a maximum 18X Write speed or a maximum 6X Rewrite speed
Create a DVD-RAM at a maximum 12X Write speed
Play a DVD-Rom at a maximum 16X Read speed
Create a CD-Rom at a maximum 40X Write speed
Create a CD-RW at a maximum 32X Rewrite speed
Play a CD-Rom at a maximum 40X Read speed
Card Slots: 1 x CompactFlash
1 x MicroDrive
1 x Memory Stick
1 x Memory Stick Duo
1 x Memory Stick PRO
1 x MiniSD
1 x SmartMedia Card
1 x Secure Digital(SD)/MMC
1 x xD-Picture Card
Audio Channels: 6 Channel Audio
Video Chipset Brand: S3
Video Chipset: UniChrome Pro
Video Bus: AGP 8X
Video Integration: Motherboard
Total Available Graphics Memory (Vista): 128 MB
Port Connectors: 8 x USB 2.0 (4 on front, 4 on back)
1 x Microphone/Headphone/Line-in (on front)
1 x Parallel (on back)
2 x PS/2 (on back)
1 x Digital Audio In (on back)
1 x Digital Audio Out (on back)
1 x RJ-45 Ethernet LAN (on back)
1 x RJ-11 Modem (on back)
1 x Rear speaker out/Side speaker out/Center (subwoofer) (on back)
1 x Microphone/Line-in/Line-out (on back)
1 Video - VGA 15-pin D-Sub (on back)
AGP Slots: 1
PCI Slots: 3
Slots Notes: 2 x PCI open
1 x AGP open
External 3.5 Bays: 2
External 5.25 Bays: 2
External Bays Notes: 1 x 3.5-inch open
1 x 5.25-inch open
Internal 3.5 Bays: 4
Internal Bays (Notes): 3 x 3.5-inch open
Network Support: Ethernet (10/100 Mbps)

im using this one
http://global.msi.com.tw/index.php?func=proddesc&prod_no=1039&maincat_no=1&cat2_no=170&cat3_no=2

Similar Messages

Desktop frozen on startup after installing new video card. Please help!

Recently we upgraded my computers graphics card to a Gigabyte Geforce GTX650 and we have also upgraded the power supply to an EX2 525W power supply. When we plug the PCIE into the video card and enable the slot the screen goes to the standard startup screen and says press escape for startup menu but then freezes there. We have tried updating the BIOS and we have made sure that all the connections were secure. If we try having the video card plugged in and run the onboard graphics the computer will beep several times and there will be no screen output.
Power supply: http://www.coolermaster-usa.com/product.php?product_id=3082
Video card: http://www.gigabyte.com/products/product-page.aspx?pid=4359#ov
Any and all help is greatly appreciated on this!
-Conner

I understand a new video card isn't working as expected.
What is the product number and model of the PC? The following document details how to find this information should you need it.
http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=en&docname=c00033108&...
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Installing new Video Card

Hi
I'm trying to install an ATI Radeon (256 Mb) video card on my MSI board (MS - 6787 Via ProSavage DDR Chipset) but when I power up the PC it doesn't boot. What should I do??
I've tried before with a Riva TNT- 2 (64Mb) but it didn't work either.
I've tried already desabling onboard graphics, but It didn't work any way. System just doesn't boot and I get no beeps whatsoever... After doing this, had to flash my bios because after uninstalling the external video card, the system booted but didn't get any video.
The video card is a Radeon 9550 256Mb
Thanks
MS-6787 VIA® ProSavageDDR™ P4M266A Chipset
Intel Pentium IV 2.80 Ghz
1 X Kingston PC2100 512MB 266MHz DDR Non-ECC CL2 DIMM
PSU: Model No. LPJ2-18 350W 3.3v/32A 5v/32A 12v/22A
MAXTOR DiamondMax ATA 133 7200 RPM 120Gb
Western Digital ATA 133 7200 RPM 20Gb
BenQ CD 52X
LG DVD - RW
Windows XP Professional SP3

I've been reading about the Radeon 9550 features but my P4MAM-L mainboard seems to support 4x AGP cards, so I think it must work with it too.
'll try to upgrade my bios and then get back to you
MS-6787 VIA® ProSavageDDR™ P4M266A Chipset
Intel Pentium IV 2.80 Ghz
1 X Kingston PC2100 512MB 266MHz DDR Non-ECC CL2 DIMM
PSU: Model No. LPJ2-18 350W 3.3v/32A 5v/32A 12v/22A
MAXTOR DiamondMax SATA 300 7200 RPM 120Gb
Western Digital ATA 133 7200 RPM 20Gb
BenQ CD 52X
LG DVD - RW
Windows XP Professional SP3

MS-6714 trying to install new video card

Well, I have done everything I can think of short of sledgehammering my computer into oblivion. Just bought this comp it is a 2.8 celeron using the 6714. Thought I could just stick a new video card in. It recogzines the video card, but will not use it. Even when I disable the on board through the device manager. It just uses generic vga drivers. Any clue how I can get this card to be used?

Hi,
Which 6714 are you using???
Check link:
http://www.msi.com.tw/program/search/ser/SerConProRes.php?keyword=6714&kind=1
Also,
1)have you disabled the ONBOARD graphics in the BIOS???
2)which video card you trying to install and which version of drivers?
3)what PSU do you have and model number?
Every single piece of info you give, shortens the answer/solution time...
Del

Won't boot after installing new video card

Hello, I have a H8-1284 desktop computer, and a few days ago the video card went. So i bought a Geforce GTX 650 video card, and after installing the card and starting the comp, it just hangs at the HP logo splash screen. So I put an older geforce 8800, and it boots no problem. When I try the new Geforce GTX 650 card, same thing, just hangs at splash screen. I checked the bios and there doent seem to be anything there that wouild help. My power supply is 460 w, and the new card only needs 400 w, any and all help will be greatly appreciated
This question was solved.
View Solution.

Hi,
Most PCI-E 3.0 cards are backwards compatible with PCI-E 2.0 slots. However, in order to get PCI-E version 3 you need to be using an Ivy Bridge processor. Review these specifications for a typical NVIDIA GTX 650.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Mac Pro (v1.1) won't login after installing new video card

Hello,
I have a Mac Pro from 2006 and after my NVidia 7300GT burned, I bought a Geforce 8800GT to replace my old card. After I installed it to the motherboard following the user manual, I turn on my mac and I get the white screen with the apple logo but it won't login. I left it like that for 30 minutes, then I forced restart and the same thing happens. Does anyone have a clue why this happens and how can it be fixed?
Thank you

8800 required 10.5.2 or later (10.5.3 DVD and 10.5.6 DVDs were sold, though now $29 will get you 10.6.3).
No OS earlier than 10.5.2, in addition to there having been two versions of the card, EFI32 (2006-7) and EFI64 (2008+).
my link to ebay doesn't list it now:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300448795337#ht3170wt1139

Trouble installing new video card

I have a HP Pavilion a6720y Desktop which operates with Windows Vista 64-bit, and I had uninstalled the drivers on my current video card and powered down and opened up my computer, however I could not find a graphics card anywhere in my computer, the PCI slot was empty. So I put in the new card and when I tried turning on the computer again the monitor would not display anything as if the computer were off, when it was clearly on. Can anyone tell me what to do and where exactly the old video card is so I can remove it, If I can remove it.

Hi:
Below is the link to the product specs for your PC.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01643511&tmp_task=prodinfoCategory&cc=us&dlc=en...
There is no add-on video card (one you can remove).
The video on your PC is a GPU chip integrated onto the motherboard.
You may have to connect the monitor cable back to the onboard (old) video input, and go into the BIOS, and look for a setting to either disable the onboard video, or enable the PCIe/PCI video, or set it as the primary video controller.
I don't have your model PC, so I don't know what BIOS settings it has.
Not all PC's automatically disable the onboard video chip when an add on video card is installed.
If there are no video settings then one of two things is possible:
1. You inadvertently hooked the monitor back up to the old video port (I've done that before).
2. Your video card is defective or incompatible with your PC (may draw too much power, or be too high a PCIe version like 2.1).
Paul

OVMS - Local display cuts out after boot DMS 59 Video Card

Hey All -
We use OVM/OVS on what you might call 'desktop servers'. We have several setup. We recently purchased some more machines that I am installing OVS onto and will add them to the cluster.
However, these machines only video connection is DMS 59. As such, we are using a default DMS 59 to DVI splitter, and then just running a single connection from the splitter to a DVI capable monitor.
Using this, OVS can be installed. However, on each successive boot after installing the display will show GRUB, the boot, and then right before OVS loads its console the display ceases to function.
Now I assume this has to do with our DMS 59 connections - but I can't find any documentation about why this may not be supported or if I am missing a driver.
Thoughts?
Edited by: 1009782 on Jun 4, 2013 11:46 AM

The bug is known, and a patch has been submitted: https://bugs.freedesktop.org/show_bug.cgi?id=80151. There's been no update since friday, so I wonder what the current status is, or if it's up for review at all.
Does anyone know how we can be notified when this patch hits the kernel?

Installing a video card

what is the right order to install new video card ?? is it like this :
install
1. AGP SIS DRIVER
2. original software from VIDEOCARD CD
3. install directX
4. install DETONATOR

This is what I would do for 98.
Uninstall the device and drivers and reboot. let 98 install the standard VGA drivers after the restart.
Run the Detonator Destroyer found at Guru3d.
Shutdown replace old vid card with new and restart, then install the detonators recommended for the new card.
As far as direct x I do not know what version you have but youy can do that before or after.

No onboard audio after installing new graphics card

Good afternoon,
This is my system:
Pavilion Elite 5100t ATX PX
Vista 64
Raedon HD 5670
After installing the video card, the onboard 5.1 audio panel at the back only produces sound for the subwoofer. The front headphone jack is still working. The video card supports HDMI, and therefore has an audio component in it. I tried the following without any solution:
1. Setting onboard audio as "enable" in BIOS
2. Choosing "speakers" as default in control panel-->sound
3. Disabling the HDMI audio output in control panel-->sound
4. Uninstalling both audio drivers (onboard Realtek and AMD from the VC) with auto-reinstallation when restart
Those are the common recommendations I got from different forum. Your help is greatly appreciated.
cvan11

Hi,
Did you try the latest Realtek audio driver?
I had a problem similar to yours with my NVIDIA GT 460. It turned out to be a bad Realtek audio driver. I had to go back to the original Realtek driver that came with my HP PC until Realtek fixed that issue that I reported to them. I had tried six differnet Realtek drivers.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

No Signal after installing new graphics card

Hello and thanks in advance for your help!
We have a 2yr old HP p6540y. It has an ATI integrated Video Card. When we recently turned it on, we got a 'no signal' message on the monitor and then it would go to sleep. We have tried several things to fix...listed below, in order, and are still getting the same message. Please advise!
1) No Signal: DVI, VGA, HDMI. So we unplugged and restarted, no change.
2) Checked monitor and DVI & VGA cords with another computer: They all work.
3) Installed new Graphics Card: NVIDIA GEForce GT 610. Still got same 'no signal' message.
4) We plugged/unplugged all other cards/cords/anything we could and cleaned out. Then, finally, the monitor turned on! But not for long....
5) After restarting computer after installation of graphics card driver, we got the 'no signal' message again. We once again, pulled out other cards/plugs and again the monitor/computer came to life.
6) We unistalled the integrated ATI graphic card. When we go to Display, Advanced Options, it lists our new NVIDIA as graphic/display card.
7) We turned computer off overnight and this morning when we turned on, we once agin got the 'no signal' message. We unplugged/plugged computer in several times. Also tried the trick with pulling out cards/plugs and we got nothing. No Signal. After doing this several times (about 10), it finally worked again.
8) We changed sleep settings to: Screensaver=Never; Sleep Mode=Never.
9) We restarted again to once again get no signal message.
So...what do we need to do?
Thanks so much!
This question was solved.
View Solution.

Triusa, welcome to the forum.
I suspect that your problem is caused by the power supply unit (PSU). Here is a guide to help you troubleshoot the problem:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph06788&lc=en&dlc=en&cc=us&product=502610&rule=...
Also, the existing PSU is 250W. The GT 610 requires a minimum of 300W.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Startup problems after instaling new graphics card drivers

PC: HP p6520 f with a 400 watt power supply
video card: AMD Radeon 6570 (MD1GD3)
After getting the 400 watt power supply, I was able to uninstall the intergrated graphics card's drivers, but I can't succsesfully startup after installing drivers for the new card without a system restore, which of course gets rid of the new drivers.
I've tried newer drivers, but those don't work either.
Any suggestions?

Hello Sev_07. I understand you're unable to install your video card drivers.
Are you receiving an error on boot?
Are you experiencing any issues with other pieces of hardware?
Have you tried running HP Support Assistant and Windows Update to ensure all of the software and drivers are completely up to date?
It may also be helpful for you to provide your product number so I can look at your computer's specifications. This document can show you where this is located.
I hope you have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

HT1222 ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : Bambangtjio@yahoo.o.id) Thanks

ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : [email protected]) Thanks

Hi,
Sounds like it isn't to serious. the Bluetooth connection had an error and that is that generated
the Problem report.
When the Blackberry started to use Bluetooth the "gold standard" was using Microsoft's
"native" windows drivers. Now, every major PC company has there own version
Thus the problem report.
There is rather involved and lengthy procedure to check and install the correct Bluetooth drivers
in the Dell, but I really don't think you want to take that on.( Nod you head and say H*LL YES)
Here is what I propose;
The problem report needs to be resolved or it wont go away. Read the manual, call Dell,
try apologizing to it and that you'll never never do it again, what ever it takes!
Make the best investment you can make for your Blackberry, buy a media card.
All the memory in the BB is dynamic, this facilitates the functions of the phone.
By storing media in that memory, you effect are wasting X amount for file storage.
Store all media and files on the media card, and you will have a smooth running device.
They run about $25.00usd, they are easy to install, and they also make moving your
media a snap. You will need the USB adapter that came with it, but you can get that at
your local carrier store.
So if you agree with this I need some info.
On the Blackberry go to the options icon,click then scroll up to ABOUT.
I need your software version number, it's listed in this format: 4.x.x.xxx.
Send it back to me and I can tell you what size card you can get.
Let me know your thoughts!
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

HT1420 looking at the 'help' to work out how to authorise new computer so can play songs, the instructions say - open itunes - go to store tab -locate 'authorise computer'- I cannot find the 'authorise computer' part !

looking at the 'help' to work out how to authorise new computer so can play songs, the instructions say - open itunes - go to store tab -locate 'authorise computer'- I cannot find the 'authorise computer' part !

You are looking at the drop-down menus at the top of iTunes e.g. on a Mac :
If you are on iTunes 11 on Windows then press Alt-S and the Store menu should appear at the top.

No Sound after installing new video c

Hello folks.
I'm having a problem with the sound not working on my system. Basically I was having problems with visual corruption on-screen when playing OpenGL games like Call of Duty. I replaced my power supply and my video card, which has fixed the visual problem. However, the new video card has apparently taken some of the system's resources away from the sound.
Here's some hardware information:
Sound Blaster Li've! Platinum Edition sound
SOYO KT400 Dragon Ultra motherboard
ATI Radeon x700 Pro 256 MB video (the new card)
When I go into Device Manager I get this error: "This device cannot find enough free resources that it can use. (Code 2). If you want to use this device, you will need to disable one of the other devices on this system." My motherboard has onboard sound, C-Media, which I have disabled in BIOS. The video card is plugged in essentially the same way as the previous one was. I have tried reinstalling the sound via Device Manager to no avail. I have noticed that on separate attempts, the sound devices were listed differently. The first time they were all listed in a tree: 4 SB Li've! WDM, then 4 of the Gameport. They were all sandwiched within one another. The second time around they were all 8 listed as separate devices.
I'm at work at the moment so I'm sorry I can't provide further details. Can anyone help me with this situation? I would very much appreciate your help. Thank you.Message Edited by vendetta4 on 06-0-2005 06:42 PM

first, in the hardware manager delete all unplugged video cards, audio cards and monitors (cleanup purpose). to display them, go to display->display hidden devices.
provide us a capture of the extended device manager, and your complete list of hardware.

Help system hang out after i installed new video card

Similar Messages

Maybe you are looking for