Help...the cursor on my mac is not responding whether by mouse or touch whas happng/
Ok I nee help I am right in the middle of workig on a chool project and my curser just stop resonding with both my wireless mouse and through touch,
please help me?
Press command + option + esc keys together at the same time. Wait.
When Force Quit window appears, select the Safari if not already.
Press Force Quit button at the bottom of the window. Wait.
Safari will quit.
Relaunch Safari holding the shift key down.
Similar Messages
-
I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly. Should I just delete the new profile and try again?
If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues. -
09 I Mac goes asleep ends up with a spinning disk on the screen and the mac will not respond has to be rebooted
First this:
In EnergySaver deselect "put the hard disk to sleep when possible". You must logout after the setting to make this effective.
This probably will not solve it, but let it be deselected.
When the issue is still there:
Open Terminal;
copy/paste following command (after every command hit "enter" key)
pmset -g | grep hibernatemode
when the answer is not 3 write it down;
then copy/paste following command
sudo pmset -a hibernatemode 0
reboot
Open Terminal;
copy/paste following command
sudo rm /var/vm/sleepimage
after that type EXIT in Terminal and close Terminal.
This does following for you:
it will set the hibernatemode to zero: the sleepimage (a copy of the complete ram) will not be written and the space on the HD is freed up.
This sleepimage does not do anything for you but taking time at sleep/hibernate and startup. It is an old remnant of earlier days. -
Hi: my mac air safari is not loading all websites since i upgraded my software.. it download only few website and crome in the mac is not responding at all.. what to do please advise ???
Safari Problems
Safari - Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
Try setting up another admin user account to see if the same problem continues. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About -
Why is my cursor taking holidays and choosing to not respond to my mouse or mice as I have more than one that I can use and it refuses to respond for a period of time
Hi
Yes you can delete the expired certificate which are showing as it is not functional anymore and they remain as stale entries
You can use below command
Remove-ExchangeCertificate -Thumbprint "specify the value "
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com -
Mac will not respond to pressing on button
Hi, I installed a new HD in a MacBook Pro 17inch 2007 and the mac booted fine. I tightened the screws and now the Mac will not respond to the power button.
I've re-opened the mac and the fan just moves slightly when I press the powewr button and thats it.
I have reset the SMC but this has not helped.
Has anyone else experienced this?Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
today I get issues with my z10 device. When I in a phone call, the screen don’t auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently. can anyone help me with this?
Same issue already several weeks.
And we are not alone:
http://forums.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/i...
At all there is, I think, 4 threads in parallel about this issue at CB forums. One of the:
ms.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/index5.html
I already contacted BB Help at Twitter. Answer:
Thanks for the information. It seems that you have installed an OS version higher than the one supported by your carrier on your device. Please contact your carrier to get the supported OS version and try the proximity and light sensors. Let us know if you need further assistance. Cheers. ^LFC.
I did replay:
You are confused me. Phone got updates over network automatically. On crackberry forum a lot of people from different countries and with Different OS version, but with the same problem. Hi, this is thread at CrackBerry: http://forums.crackberry.com/blackberry-z10-f254/proximity-sensor-906493/index3.html
This my replay was 22 of march. No more answer from BB.
I can't contact my operator - 3UK, because I bought my from on Amazon from Amazon. This phone not from operator - seller is Amazon.
What I already done:
For last week, I read, how to install OS using Sachesi and Autoloader. I used Sachesi to load 3 UK version, I installed autoloader from this links:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
This
For Z10 models STL100-1, 2, -3, -4: Download 10.2.1.1925
Doesn't help
And this:
For Z10 models STL100-2, -3, -4: Download the 10.2.0.1803 OS
No result.
After install all of them phone wants to update to 10.2.1.2102 by air.
BBVE in all versions sais: Can not obtain data from sensors.
Dear BB support, please, can you explain, how to resolve this issue? -
Why the top bar at Safari is not responding and the book picture stays blue
the last two days the bar at the top of safari page is not responding. The book indicator looks like it stays pressed and all other functions are blocked.
Delete safari .plist file.
Quit all applications.
Option click the "Go" menu in the Finder menu bar.
Select "Library" from the drop down.
Library > Preferences > com.apple.Safari.plist
Right click on it and select "Move it to Trash".
Restart. Relaunch Safari.
If this doesn't help, put back the com.apple.Safari.plist
Right click the Trash icon in the Dock and select “Open”.
Right click the com.apple.Safari.plist and select “Put Back”. -
I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond. I have tried pressing the two buttons together and briefly get the Apple logo but still can not restart, the logo disappears. I have tried connecting to my iMac to restore the iPad but the device does not show up (I have an old iMac). What else can I do?
You need to be running Snow Leopard 10.6.8 at the very least in order to sync your iPad with iTunes so you could update your Mac, if it can be updated, and if you care to do so.
If that's not an option, you will have to find someone that can restore the device for you with their computer running iTunes or make an appointment at an Apple Store and ask them to restore the device for you.
I hope that you have an iCloud backup, because you will lose everything on the device when it is restored.
Snow Leopard can still be purchased in the U.S. Apple Online Store.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Also, I would not give up on the reset technique....holding down on the sleep and home buttons at the same time until the Apple logo appears. It takes about 10-15 seconds and sometimes just a little longer to get the logo to appear. -
When using icloud because I lost my ipad...when i attempt to use the "LOST" feature the "next" and "cancel" buttons do not respond. I have attempted this on 3 different windows based computers on 3 different networks. Any ideas?
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
Cheers, Tom -
My aux input does not work. When i put in my headphones my mac does not respond, and my speakers just continues as normal. What to do?
I had the same issue. Initially i thought i need to take it to apple for replacing the aux port. But luckily I was able to fix it by resetting the PRAM . To reset the PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
Release the keys.
Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
You can try this before you take to apple store. It may work if you are lucky. Good luck -
Why does ichat video not connect? The error message says we did not respond.
Why does ichat video not connect? The error message says we did not respond.
Hi,
iChat uses several port as they are called over the internet to do different things
Text Chats and Video Chats are on different Ports.
You probably don't have the port open.
Use UPnP in your router if it has it.
8:59 PM Sunday; August 12, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond
I do not understand how a company like Apple puts experts to help users
Please note that anonymous experts in Internet offer their help for moneyUsers of imovie experience a lot of problems and crying for help and no one at Apple did not respond
I do not understand how a company like Apple puts experts to help users
Please note that anonymous experts in Internet offer their help for money -
The software update server (nrc1) is not responding
the software update server (nrc1) is not responding
I have been receiving this message on my Snow Leaopard iMac for weeks now when I try Software Update ....
There appears to be nothing in the Communities database about it, my internet connection works fine and always has ... any ideas?Some things you can try:
1. See if software update works from another account.
2. Boot in safe mode. See if SU works. If so, reboot normally and try again.
3. If those don't work maybe you need to delete the software update cache.
~/Library/Caches/com.apple.SoftwareUpdate/
Note there are two plists assocated with SU but I don't think deleting them will change anything since there is nothing significant in them. They are,
~/Library/Preferences/com.apple.systempreferences.plist
~/Library/Preferences/ByHost/com.apple.SoftwareUpdate.XXXXXX.plist
where the X's are a sequence of hyphenated upper case leters and digits. -
Problem: my iPhone 4S (1yr old) has started buzzing for no apparent reason. I cannot stop it or turn the thing off. The screen is black and does not respond to touch. Any suggestions?
Thanks, AM_Kidd, I had tried that before but I tried again and this time it WORKED!!!!
The buzzing stopped and I have the home screen up again.
Phew! It may be that it had been on charge for the last 30 mins.
Whatever. Again, many thanks.
Maybe you are looking for
-
How To Disable Save Button in a PDF
I have Creating One Application in Oracle Forms 6 and Run in Web In that I have Showing a Pdf Fie using a WEB.SHOW_DCOUMENT. But I have to Disable a Save and print Button in Display pdf file in a IE. It's Possible then help thx
-
Sales order not getting created in background.
I am using user exit to write my code to create sales order of basic type ORDERS05 with function module idoc_input_orders, and process code ORDE with my own message type. If I run the program in foreground message KUWEV-KUNNR is not an input field co
-
T COde CS15 : Report is not showing the "Alternative BOM No" for some BOMs
Hello Guru, I am facing a problem for the transaction CS15, when I use this transaction, in the output for some materials, system is not showing "Alternative number" of BOM. I cheked Deletion indicator, status of the BOM, validity period etc. But una
-
Hi, i have a web service that takes two double numbers and returns complex type @WebService( name="Complex",serviceName="ComplexService") public class Complex { private double real; private double img; @WebMethod(operationName = "add") pu
-
Missing Features on a q10reeditted
After a month of brain storming I can now say with some authority that features which meant a lot in bb9900 are lined below - 1) one touch speed dial is not really 1 touch at min is 3 touch 2) there is no saved message option 3) in case a mail could