Help!!!! the datasource of sd influence

Dear all
I changed extract structures in LO Customizing Cockpit (2LIS_11_VCITEM/2LIS_12_VCITEM/2LIS_13_VCITEM) and append fields for these datasources. i test in QAS,load data into BW is ok and R3 SD module not affect. but i transport these to R3 Product system ,before i load data into BW ,R3 SD module can not do transaction operations and not update , in SM13,there are no update informations. i find some notes of these ,but valid not for the system (version R/3 4.7). i deactive the datasource in LBWE,the issure is solved and SD operation no problem,but the BW can not load data.
Could anyone give me a good solution? The case is very very urgent?
Best regards
ALpha

Dear,
you imported some changes to extract structures in application comp. 12 (deliveries) without taking care of your queue...so you need to delete immediately these entries from SM13 to unlock this situation in R/3 and reinit your flow in BW...Bye,
Roberto

Similar Messages

Possible to change the datasource from a business-view to a Sql Command ?

Hello,
When a business view contains a lot of elements it takes a while just to open the report.
We'd like to keep the BV as the dictionnary, but,
once the report design completed,
we'd like to disconnect the business view and replace it by the Sql command which can be seen in the menu option 'show SQL query'.
Is it possible via the RAS sdk ?
Did somebody experience this ?
How to proceed ?
Thanks a lot
Alain

Hi Ted,
I'm thinking opening a Case for this problem of opening reports based on a big BV.
We can't really reduce the BV, since it is the dictionnary and we need the whole thing...
I'm wondering why it is impossible to change the Datasource if the tables and fields underneath are identical.
Is it impossible to change the fields' mapping ?
The other solution, as you suggest, is to create a report from scratch, create a new Datasource with the Sql command format, and rebuild the report... I agree it looks like a big job...
Do you know if it is possible to export the report in XML for instance, change the XML, and then re-import ?
Thanks for your Help.
Alain

Fields in the datasource 0VENDOR_ATTR

Hi Gurus,
I need to unhide some fields in the datasource 0VENDOR_ATTR and then replicate it into BW. It is already loading the data into BW. Now I need some more fields to pass data into BW. Here my issue is my datasource is in display mode. I need to make it CHANGE mode so that I can unhide the fields. Is it not possible to unhide the fields when it is already with data.? Please suggest me.
Thanks in advance.

Hey you can go ahead and unhide fields.Yes you have to do in change mode.
1) Save the datasource.Check if the fields which were unhide are getting populated in RSA3.
2) Replicate the datasource in BW/BI side.
3) Map the corresponding objects in transfer rules.
4) Activate the transfer rules.
5) Load data.
6) Activate master data.
0VENDOR being master data you should not have issues.
Hope this helps.

How to change the datasource from one server to another server?

i need to change the datasource from development environment to production server. i had configured the JNDI informations like the following in the 'context.xml':
<Context path="/RFT" docBase="RFT" reloadable="true">
<Resource
auth="Container"
type="javax.sql.DataSource"
driverClassName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
validationQuery="select 1"
name="jdbc/datasource"
username="sa"
password="$m1sbag$"
maxIdle="-1"
maxActive="0"
maxWait="5000"
url="jdbc:microsoft:sqlserver://172.24.151.149:1433;databaseName=Projectgold" />
<WatchedResource>WEB-INF/web.xml</WatchedResource>
</Context>
and in 'web.xml' included the following code:
<resource-ref>
                     <res-ref-name>jdbc/datasource</res-ref-name>
                     <res-type>javax.sql.DataSource</res-type>
     <res-auth>Container</res-auth>
</resource-ref>
and mentioned the JNDI Connection Name in the .rpt file as 'jdbc/datasource', but still getting the same connection which one is configured during the report design. need a help to resolve this...
Thanks,
Ram

eventhough it's working fine. I may have deployment problem. Anyway thanks for the reply.
Regards,
Ram

2LIS_04_P_MATNR - Prob in activating the Datasource in R/3

Hello,
I am trying to activate datasource 2LIS_04_P_MATNR in r/3 in Tcode : rsa6/rsa5 and I am getting a warning that says
The even-numbered length of the DEC field I_DLZ_EX can lead to problems
I serached and found that note : 641744 is applicable.
The solution in the note says that there are 3 options to rectify this error as below:
If the field is not manipulated in the customer exit or elsewhere, no processing is required.
If you change the field, the following possible solutions are available:
You can make sure that the number of the characters does not increase after the manipulation.
If you can change the extract structure of the DataSource without affecting other scenarios (for example, if it was generated in transaction RSO2), you can increase the length of the DEC field (or CURR, QUAN) there to the next odd character (in the example above: from DEC 4 on DEC 5).
If neither of these solutions are possible, you can use a customer append that contains a relevant DEC field (or CURR, QUAN) with the next highest odd length. This can be used for the result of the calculations. This means that you do not have to manipulate the previous field.
I am opting the 3rd option i.e. to use an append structure with a field QUAN(in my case) that has next highest odd length
I am using the field BDMNG(length 13) from table RESB. The feild mentioned in the warning have length 12.
The problem is still occuring.
Am I able to understand the note correctly or am I missing something?
Can anyone help here?

Thanks Deva. I ignored the warning and went ahead with the enhancement.
After the activation of datasource I deleted and filled the setup tables, but the NPRT log showed 0 records.
Then after reading few threads at SCN I came to a conculsion that my setup table is refering to view CAUFV which does not contain data for order category AUTYP 10(PP Production Order) and therefore the data extracted is 0.
There was a thread mentioning the same problem that said (steps to fill the setup tables for 2LIS_04_PECOMP(Repetitive manufacturing Component view)) that the solution was to run OLIFBW Tcode after completing OLI4BW setup. So i did the same. But still my NPRT log still shows 0 records.
Also I checked AUFK table. It does not contain any data for AUTYP 10.
Please advise what should be the correct way to solve this.

Can I edit the rpt file & change the datasource before loading the report?

We are an ISV and our application has a lot of reports. Our reports use a SQL Server database as the data source and each SQL Server at our customer sites has a different name.
In our testing we have determined that ReportDocument.Load tries to connect to the SQL Server that is saved in the RPT. If it can't fine the SQL Server saved in the RPT the load take about 60 seconds while it is waiting for the SQL Server Connection to time out.
We are using the Visual Studio 2008 version of Crystal Reports. This did not seem to be a problem with VB6/CR8.5.
We would like to edit the RPT and change the data source to the appropriate SQL Server before we call ReportDocument.Load.
Is it possible to edit the rpt file and change the data source before loading the report?
Or is there some way to tell Crystal not to try connecting to the DB
during the report.load?
In our case we will NEVER use the data source that is saved in the RPT, we will always change the data source using ApplyLogOnInfo.
Thanks

HI Todd,
You Can Not edit the report document before ReportDocument.Load() because if you dont load the report then you dont have anything to Edit
But as far as changing the datasource is concerned you can change that at runtime.
For changing the datasource following code will help you if both databases have a same schema :
Code for changing the database
ConnectionInfo crConnectionInfo = new ConnectionInfo();
crConnectionInfo.ServerName = "SERVER";
crConnectionInfo.DatabaseName = "DATABASE";
crConnectionInfo.UserID = "USERID";
crConnectionInfo.Password = "PASSWORD";
// Loop through the ReportObjects in a report and find all the subreports
foreach(ReportObject crReportObject in crReportDocument.ReportDefinition.ReportObjects)
     // Check the kind of the ReportObject, if it is a subreport
     // proceed. If not skip.
     if(crReportObject.Kind == ReportObjectKind.SubreportObject)
          // Get the SubReport in the form of a ReportDocument
          string sSubreportName = ((SubreportObject)crReportObject).SubreportName;
          ReportDocument crSubReportDocument = crReportDocument.OpenSubreport(sSubreportName);
          // Use a loop to go through all the tables in the main report
          foreach(Table crTable in crSubReportDocument.Database.Tables)
// Get the TableLogOnInfo from the Table and then set the new
// ConnectionInfo values.
TableLogOnInfo crLogOnInfo = crTable.LogOnInfo;
crLogOnInfo.ConnectionInfo = crConnectionInfo;
// Apply the TableLogOnInfo
crTable.ApplyLogOnInfo(crLogOnInfo);
// Set the location of the database. This value will vary from database to
// database.
crTable.Location = "DATABASE.OWNER.TABLENAME" or crTable.Locations;
The sample for doing this is available on support site.
Thanks,
Prasad

How to find out the Datasources for particular data in R/3

Hi ,
I want to retrive the data from R/3 tables which are VEKP, INOB ,AUSP , CABN .. these all are ACCOUNTABILITY details... so, how can i find the BI content DataSources are available or not... if available means..
for these ACCOUNTABILITY details.. i want to know the BI content CUBES and ODS's and Datasources... so, can any one give me the names of datasources.. or cubes.. and how can we find out those names...
helpfull answers will be highly appriciated..
regards
Babu

The best way to go for this is to check the table RSOSFIELDMAP in BW.
Put in the values below and you would see which field of R/3 maps to which info object in BW. If nothing is mapped that means there is no infoobject mapped yet to that field. In this case you need to hunt in the BC or create your own info object.
Soursystem = your r/3 sourssytem
version = A
field = your r/3 field name
Once you get the datasource name, i am sure you can figure out the corresponding infosource and then the cubes and ODS linked to that infosource. ( right click infosource - - show dataflow)
Hope this helps.

What is the DataSource for 'Rebate Agreement' (Data comes KONA,KONP&KONH) ?

Hi all,
What is the DataSource name for 'Rebate Agreement', please?
This data comes KONA, KONP & KONH tables.
Thanks,
Venkat.

Hello Venkat,
you can extract it from 2LIS_13_VDKON Extraction of SD Billing Conditions
http://help.sap.com/saphelp_nw2004s/helpdata/en/17/cd5e407aa4c44ce10000000a1550b0/frameset.htm
Sarhan.

Source system in RSA1 is diiferent to the datasource in infoprovider

Dear Guru's
I have created a quality source system in RSA1 tcode for client 210 but in my infoprovider it shows me of diiferent datasource ie for client 200 and i need this client to be 210 so kindly help me to resolve this issue
Regards
Mohammed

HI,
Do you want to change all the assignments from client 200 to 210. Or is it for this particular Infoprovider (you have mentioned) and the relevant transformations.
Does
1) both clients exists as your source systems or
2) client 200 is to be replaced by client 210.
In the second scenario, you can refer this article. Contact your BASIS team for guidance.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/805eefcd-5428-2d10-c0ab-dc27a95b2c81
For scenario 1, if you want to load data from 210 client to this particular Infoprovider , replicate the datasource for client 210 in BI side and create new transformation, Infopackage and DTP from the datasource to the target.
Hope this helps.
Regards,
hari.

How to check the Datasource name for Virtual cube

Hello Experts,
I have a report which is built on one multiproviider for which we are getting balance sheet data reporting on company code,enduser told us that he wanted to see the data on plant level...
The problem here is that I have checked the data flow for the multiprovider,It is showing as getting data from virtual cube.
So,from there It is not showing the datasource and infosource under it(under virtual cube)..so how can I check the datasource name for it,so that I can go and enhance the datasource in case the plant(WERKS) is not there
thanks
reddy

Hi Friend,
go virtual cube lavel and see the data flow with "downward & upward" option in RSA1
Go to RSA1
Select the Virtual cube> right click > display data flow> select "downward & upward"
it may help you

Error in module RSQL of the datasource inter face

Hi All,
We have installed a fresh BIW server on MSSQL database 2005. We have selected components like as ABAP.JAVA,EP,EP Core ,BI Java. While replicating the datasource using tcode RSA1 from R/3 Retail Server we are getting an error Error in module RSQL of the datasource inter face .
Details of Support package level-:
SAP_ABA 700 0016 SAPKA70016 Cross-Application Component
SAP_BASIS 700 0016 SAPKB70016 SAP Basis Component
PI_BASIS 2006_1_700 0007 SAPKIPYM07 Basis Plug-In (PI_BASIS) 2006_1_700
SAP_BW 700 0018 SAPKW70018 SAP NetWeaver BI 7.0
BI_CONT 703 0008 SAPKIBIIP8 Business Intelligence Content
Please suggest us the solution.
Note: we are not getting any dump in st22. we have already checked the note 1162821
Regards,
Dushyant

Check this threads,
Re: PSA have not data
Re: Unable to Activate Source System after Upgrade
That might help
Regards
Juan

Changing the datasource in an excel file

Hi,
we used Oracle ODBC Version 7.3 V2.5 for a lot of Excel sheets. Now we are upgrading to ODBC Version 8.0.5 because the old version makes problems with Windows 2000.
As the datasource is stored in the Excel file I need to know how to change the data source in the Excel file without having to create all the queries from scratch.
Can anyone help me with that problem?
Thanks, Jens

OK. The section
DRIVER={Oracle ODBC Driver};SERVER=fe;UID=scott;;DBQ=fe;DBA=W;APA=T;PFC=1;TLO=O;
is called your connection string. Your Excel script is using this rather than a DSN to specify the driver to use and the parameters for the connection.
If you install the latest Oracle ODBC driver for the 8.0.5 client, I believe that the driver name will need to change to "Oracle ODBC Driver in <name of your Oracle Home>". If you're using an older version of the driver that is not multi-home compliant, the driver name will remain the same. If this is going to be run on a lot of machines, you may want to consider changing to use a DSN rather than specifying the driver name, just in case other people used different Oracle Home names when they were installing. If you set up a DSN named "DSNfe", your connection string would be something like:
DSN=DSNfe;UID=scott;PWD=tiger
The other thing you need to ensure is that you have a tnsnames.ora entry in your 8.0.5 Oracle Home named "fe" that tells your client how to connect to the database.
As a side note, the "SERVER=fe;" option is ignored by the Oracle driver, it's not a valid connection string attribute.
Justin

Can I set the Datasource/Conn-pool credential programmatically ?

Hi all,
Within our ADF BC + Faces application, we use Crystal Report for our reporting solution.
Crystal use different db connection from one used by the ADF BC. so I create a Datasource in OAS, to be used only by Crystal Report.
Here is my problem :
We also use VPD. So I have requirement to login as DifferentUser to make the VPD run correctly.
How can I programmatically set the username and password of the datasource/conn-pool based on who is logging in to the application ?
Thank you for your help,
xtanto

Good question; I don't know the answer. Try a post in the Identity Management section.
Perhaps something with Enterprise Authentication may help.

Upload Error, How do you identify the datasource in BI & ECC?

Hi BI Experts,
Hope you can help me on this.
We are using BI content to extract & model the data in BI. For the asset accounting infoarea, we had an unusual dataload. It should update around 10,000 records every day. In this instance there was 500,000 records & eventually the load failed when updating the cube.
I want to investigate why there were so many records. I hoped to check the datasource & check also ECC. But unfortunately I have no experience in data extraction, so I am not clear where to start.
Have you any suggestions on an approach to finding out why there were so many records?
Thanks very much
Michelle

Thanks very much for your repsonse Francisco,
When I choose RSA3 I am faced with settings screen which has automatically populated as follows;
Request ID - TEST
Data Records/Calls 10
Display Extr. Calls 10
Update Mode F
Execution Mode,
Debug not ticked
Auth Trace not ticked
In the Selection Table below, I wish to choose just Period 6, 2011. As this is the restriction on the infopackage.
I have tried to run this with various entries but it doesn't seem to return data, what should I enter in these selections please,
Thanks Francisco,
Michelle

The DataSource with the JNDI name: contentDataSource could not be located

Hello,
We try to deploy our system/application to the servers that structed as
Machine one has:
1 administration domain
1 managed domain
Machine two has :
1 managed domain which is administrated by machine one.
I was trying to deploy the UI(portal application) to managed domain under Machine one. I got
error message as following:
Exception:weblogic.management.ApplicationException: activate failed for content.jar Module: content.jar Error: Exception activating module: EJBModule(content.jar,status=PREPARED) Unable to deploy EJB: ValueBean from content.jar: [EJB:011028]The DataSource with the JNDI name: contentDataSource could not be located. Please ensure that the DataSource has been deployed successfully and that the JNDI name in your EJB Deployment descriptor is correct.
I have portalFrameworkPool Data Sources deployed to both managed domains.
when I deploy the application to the server that has one one domain(both adminstrator domain and application domain are in one), it is fine.
Can some one with same experience, or BEA people provide some help on this? Very appreciate any help on this issue.
Thanks in advance.
Christina

:-p
If you go to each Managed Server on the console, you can see the Service tab and then go to JDBC. Under JDBC you can see all the pool connections. Instead of localhost they should be pointing to the specific hostname or ip address of the adminserver and the pointbase port on that server (9093 by default) so the EAR files can be correctly deployed and then the JNDI Tree will look exactly the same on both servers. Change all the connection pools to use the specific hostname instead of localhost. Hope this works for you.

Help!!!! the datasource of sd influence

Similar Messages

Maybe you are looking for