Help, the file "nodename" setting in incorrect format!!

Hi all,
Could any one can help me to solve this problem?
I just set an incorrect format of the file /etc/nodename:
192.168.0.1 NAME ABC
Moreover, the /etc/hosts:
172.0.0 localhost
192.168.0.1 NAME
/etc/hostname.interface:
NAME
After reboot the system, it display the following messages and can't be up:
SunOS Release 5.6 version Generic [UNIX(R) System V Release 4.0]
Copyright(c) 1983-1997, Sun Microsystems, Inc.
configuring network interfaces: ifconfig: SIOCSIFADDR: le0: Cannot assign requested address
le0.
usage: uname [-snrvmagiX]
uname [-S system_name]
re-trying host configuration...
re-trying host configuration...
re-trying host configuration...
re-trying host configuration...
and then continue to display this "re-trying host configuration...".
It is noted that this system is SPARCstation 4 and running Solaris 2.6.
It haven't cdrom and floppy drive.
It can go to "ok" prompt if press "stop + a".
Could anyone can tell me how to boot up and fix it?
Thanks a lot.
Best regards,
Carlos Ko

Hi all,
Thanks for your suggestion.
However, for the case "boot -s", the system seems no change the error messages after reboot and still shown these messages again and again.
For the case setting up a install server and boot server, is it possible to set these severs on x86 system? Since the problem is on the SPARC system and no other available SPARC system can set up as a install server and boot server. I only concern the x86 system can provide install service for a SPARC system.
Could you have any idea to modify the "nodename" file during boot up or by typing some command at "ok" prompt?
e.g. type "boot -s /etc/uname -S NAME" at "ok" prompt or something like that??
Thanks a lot.
Best regards,
Carlos Ko

Similar Messages

  • IPhoto '09 Import:  "The following files could not be imported. (The file is in  an unrecognized format.)"

    Problem:
    1)  Error when trying to import any photointo iPhoto
    "Thefollowing files could not be imported. (The file is in  an unrecognized format.)"
    2)  Can’t edit a photo in iPhoto, picturearea is black.  Same result whendouble-click to magnify a photo.
    3) for many websites (including Apple’s)Safari can't load webpages due to an error
    "Safari has repeatedly encounteredan error while trying to display.http://..."
      (may or may not be related,started about the same time.)
    pictures from Canon S90, from iPhone 4s, from the web; any jpg has same problem.
    Import methods:
    a)  Import when connect a camera SD card, or
    b)  File> Import to Library…
      Same result.
    Snow Leopard 10.6.8
    iPhoto ’09 version 8.1.2(424)
    45,028 items in 1287 events
    MacBook Pro A1211, 2.33 GHzCore 2 Duo, 4 GB RAM
    Using:
    Quicktime Player 10.0
    Quicktime Player Pro 7.6.6
    DownloadedQT 7.7; can't install because “QT X already installed”
    Tried logging in to my testaccount and importing into an empty iPhoto Library -- Same problem.
    Used iPhoto Library Managerto switch to a different (much smaller) LLibrary – same problem.
    lastsuccessful iPhoto import 11/9/2011, from iPhone
    recentsw updates:
    safari5.1.2  12/3/2011
    iTunes10.5.1  11/17/2011
    javafor mac os x 10.6 update 6 ver6.0 11/10/2011
    perConsole logs, error appears to be QTkitServer that is crashing.
    Example:
    12/4/115:10:03 PM ReportCrash[237] Saved crash report for QTKitServer[236] version??? (???) to /Users/marf/Library/Logs/DiagnosticReports/QTKitServer_2011-12-04-171003_Macint osh.crash
    based on other postings of QTkitServer crashes, Itried uninstalling:
    Flip4Mac
    Divx
    Perian
    No help.
    Screenshots available...
    Ideas?  THANKS

    Well if the problem is at Quicktime level you'll need to reinstall the OS.
    Regards
    TD

  • What Determines the "File Character Set" on Export?

    When we Export a Page, for example, from APEX, the File Character Set is defaulted to some value (and not editable). On some of our instances, this defaults to "Western European Windows 1252" while on others it is "Unicode UTF-8." Specifically, what setting is being used to make this determination? This is kind of a pain because we have some environments wherein we are promoting changes from environment to environment and these settings differ. If, during import, the user neglects to set this to the same File Character Set in which the file was originally exported, we get issues (non-printable control characters and the like). Therefore, we'd love to make all of the environments match but, aren't sure how to do this.
    Thanks,
    -Joe
    Edited by: Joe Upshaw on Apr 10, 2013 3:25 PM

    Hello Joe,
    In your environment, the character set of the APEX exported files is set according to the DAD character set, and with your APEX version, it must be set to AL32UTF8 (regardless of the database character set).
    Re: Export - File Character Set list is read only (fixe UTF-8 value)
    You should check the DAD character set setting in the environments in which APEX is not exporting the files using UTF8.
    Regards,
    Arie.
    ♦ Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
    ♦ Author of Oracle Application Express 3.2 – The Essentials and More

  • I have pre 08 iphotos saved on disk. When I try and open the  disk in I photo on macbook pro I get the following message Unreadable file, The following file could not be imported.(The file is in an unrecognized format)

    I have pre 08 iphotos saved on disk. When I try and open the  disk in I photo on macbook pro I get the following message Unreadable file, The following file could not be imported.(The file is in an unrecognized format)

    Here's a test you can run:
    1 - copy a set of photos from the disk to a folder on the desktop.
    2 - download and unzip the Automator workflow Convert to JPG and Embed sRGB profile. You can download it from Toad's Cellar.
    3 - select the files in the folder and drag and drop onto the workflow app.
    4 - try to import the resulting files.
    OT

  • How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported.  The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I updated

    How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported.  The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I downloaded the latest update for iphoto.

    You may be able to download and install the update from here: Digital Camera RAW Compatibility 6.01
    If I upgrade to Yosemite will I be forced to go to the new Photos program
    No. After upgrading (and of course make a back up first) you will need to update iPhoto to v9.6.1 (you won't be able to do this prior to upgrading). Here's how:
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
    Photos is v1 of a new app, as yes it's not as mature as iPhoto. It uses a different technology for working with external editors. That requires Adobe to write an extension to let it hook into the new app. Not done yet, neither has anyone else.
    Going forward: iPhoto will run on OS 10.10., but there is no guarantee for subsequent versions of the OS. You might want to factor that into your anger term thinking.

  • When I try to import pictures from media card to iPhoto, I'm getting the error 'The following file could not be imported. The file is in an unrecognized format.'  The file is a jpeg and I've never had this problem before.

    When I try to import pictures from media card to iPhoto, I'm getting the error 'The following file could not be imported. The file is in an unrecognized format.'  The file is a jpeg and I've never had this problem before.

    What version of iPhoto?
    What colour profile is the shot?
    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Help: The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes

    Help: The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • The file is in an unrecognized format

    http://files.me.com/xebeche/p1k7yg
    The original non-edited picture imports normally without issue. The above image was edited. It was taken with a Nikon D300 and manipulated with Photoshop CS3. I converted the photograph to grayscale, cropped, adjusted the levels and saved as a .jpg with minimum compression. When trying to import the above image into iPhoto I am met with this error:
    The following file could not be imported. (The file is in an unrecognized format.)
    The error occurs on my 13" MacBook Pro running 10.6.3 and iPhoto '09 version 8.1.2 (424). I created a new user account and experienced the exact same issue. I then tried importing the file into my girlfriend's MacBook running 10.5.8 and iPhoto '08 version 7.1.5 (378). The file imports, but appears with a black thumbnail and is a lot more contrasty when opened in iPhoto's editor than Preview. Now back to my 13" MacBook Pro. Opening the file in Preview, saving as and attempting to import the new file yields the same error mentioned above. An image with newly assigned ColorSync profile also yields the same error. In iPhoto, deselecting "Embed ColorSync profile" within the Advanced Preferences tab also does not resolve the issue. If I open the problematic image in Photoshop CS3 again and re-save as an RGB then it imports normally.
    What is the deal with grayscale mode?

    This Automator workflow, *+Convert to JPG and Embed sRGB profile+*, will convert a grayscale image to an RGB mode image with the sRGB profile. You can download it from Toad's Cellar. Just observer the warning and run it on a copy of the file(s).

  • When I try to import a folder of jpeg files into iPhoto, only some are imported. I get the message "The following files could not be imported. (The file is in an unrecognized format.)" I am running iPhoto '09 ver. 8.1.2 on OSX 10.5.8. They are all RGB.

    When I try to import a folder of jpeg files into iPhoto, only some are imported. I get the message "The following files could not be imported. (The file is in an unrecognized format.)" I am running iPhoto '09 ver. 8.1.2 on OSX 10.5.8. They are all RGB.

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • The uploaded file .xml is invalid. The file should be in XSD format.

    hi ,
    when i am trying to upload a data definition file .ie salesinvoice.xml through oracle XML Publisher , i get the error message "The uploaded file salesinvoice.xml is invalid. The file should be in XSD format."
    i tried attaching other xml files also and i get the same error message. don't know how to fix this . the rtf files i can attach without and problem.
    thanks in advance
    manohar

    This totally worked for me. Strange enough, any heads-up on whether this has been patched or not for versions 12.0 + ?
    Edited by: user8961526 on Nov 22, 2010 12:24 PM

  • I purchased the Adobe pdf Pack to combine 50 PDF files to one and when I select them from my folder it claims "the files are not in a format not supported for conversion to PDF".  They already are pdfs, what am I doing wrong?".

    I purchased the Adobe pdf Pack to combine 50 PDF files to one and when I select them from my folder it claims "the files are not in a format supported for conversion to PDF".  They already are pdfs, what am I doing wrong?

    Moved to Adobe PDF Pack (read only)

  • Need help (The files seems unsupported or damaged in LR 3.4.1

    Hi
    Recently I noticed that there are few dng files in my LR 3.4.1 are "unsupported or damaged" accordign to LR 3.4.1. Since using LR for 1 year, I never had this problem before until recently.
    My pictures are being shot by nikon D90 in nef and then they are converted to dng format in LR. I delete my raw files after LR finish converting them to dng.
    How could I recover them?

    If the files are truly damaged and you have no backups and you've written to the card since you reformatted it, I don't like your odds for recovering them.
    Corrupt DNGs point to some sort of hardware problem on your computer. The failing hardware could be anything along the input chain: card, card reader (or camera), usb cable, memory, or disk drive.
    If the DNGs were fine and editable for a while and then became corrupt, the problem will most likely be in RAM or hard drive.
    Hal

  • I get the message  Could not load "   .ai"  The file might be an unsupported format or may be corrupt.

    I am trying to open the Ai. file in my graphtec ce6000 program and I receive this message. Worked fine before and now I keep getting this message.  I can cut directly from my cutter program. So I know it has to do with an error in Ai. Please help! I have an install today and because of the holiday I cant reach technical support.

    I think you need to ask in the forum used to create the AI file
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • I created a logo on illustrator made of three layers. the file is still on ai format. Now I am ready

    Also I am creating a business card using adobe illustrator. I already have the logo in ai format.  Now after I create all the design do I need to flatten the
    card lay out or do I just take it to the print shop in AI format

    Dont flatten the layers, the print may want to add a die. I would also save a copy as .pdf format, as some printers just want to palce teh file, without spending time on missing fonts or placed images.
    So bring 2 versions of the same file, a .ai along with a .pdf. Then also gather your fonts and placed images.

  • I keep getting "file cannot be imported. the file is in an unrecognized format" in iphoto

    i have to keep trying to import files from my camera OVER & OVER & OVER AGAIN with the last 2 updates when i've never had that problem before. can anyone tell me what the **** is going on?

    get your photos off the card somehow (image capture, mount to the desktop and drag over, USB card reader, camera software, etc) and then reformat the card using the camera's format command
    LN

Maybe you are looking for

  • Script error - "photoshop is undefined"

    I have been having problems working from Bridge CC to Photoshop CC and also Lightroom to Photoshop CC on my Mac 10.9.2. These are the scripting errors I have been getting: 1. Trying to open a DNG file from Lightroom into Photoshop SCRIPT EXECUTION ER

  • Sequence number in sql

    Hi all, my SQL code as follows SELECT initcap(nvl(pat.scdsite,'blank')), SUM(DECODE(pat.rcrsite, 'LCC', 1, 0))LCC , SUM(DECODE(pat.rcrsite, 'WHC', 1, 0)) WHC,SUM(DECODE(pat.rcrsite, 'UMH', 1, 0))UMH, SUM(DECODE(pat.rcrsite, 'FSQ', 1, 0)) FSQ, SUM(CAS

  • Oracle 10G forms not running.......very urgent

    Hi all, shayan here...... i have just installed oracle databse 10g and oracle 10G developer........i have done it first time....the forms is not running even the test form is not running....i have start the OCJ4 but still the same result.............

  • Return Cursor as OUT Parameter

    I have one Implicit Cursor which will store the table Data.May I have any Chance to send Implicit Cursor as OUT parameter?.

  • How do I export a PDF to CS4 for editing.

    Someone sent me a PDF that was orignally created as a CS4 document.  I want to export back into CS4 for additionally editing.  How can I accomplish this?