Help, the pc suite music program shuts dowm after ...

Hej, I have a very big probelm, I can't transfer music to my N73, because just when I open the the 'music transferring program', it shuts down! And no matter if I try to play a song or choose another option, it's like it just ignores it and closes down..
What should I do?

Try if you could use the file manager of PCsuites instead. Browse your PC/Latop where that music files are, then copy it to your phone music directory, preferably digital & see if it does not close down.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Similar Messages

  • I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features?

    I could really use some insight into this please also how many gigs of RAM should my power mac have it only has two right now and logic tends to glitch up majorly.

    My original question :
    I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features?

  • I have joined adobe photoshop but the program shut down after just one minute, why? I cannot use it!

    I have joined adobe photoshop but the program shut down after just one minute, why? I cannot use it!

    Without proper system information and other details nobody can tell you anything. If the program shuts down after a while then presumably it fails to verify your activation, so refer to this:
    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • Please help: programs shut down after 60 sec's

    *Please help me:* Since two weeks or so (may be, after I updated my QuickTime), every program I opened *shuts down after roughly 60 seconds*. It is not closed but it gets out of the writing mode so that I need to click on the page first before being able to continue writing again (Word, email, also this thread). If I do not always look at my page I loose words and have to retype them again. Also, with backspacing it occurs: it gets out of the enter mode. I am not aware I changed anything in the user mode of my dear power book.
    Thank you for helping! rororoger

    rororoger:
    Welcome to Apple Discussions.
    Try starting up in Safe Mode. If can do so successfully, log in, Empty Trash, Restart normally and log in.
    If issue persists Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
    cornelius

  • I have a Ipod shuffle 4th generation. I would like for the music to shut off after one hour long song automatically rather than go to the next song. Is this possible?

    I have an ipod shuffle 4th generation. I would like for the music to automatically shut off after one hour long song rather than going to next song on the list. Is this possible?

    Sorry, but it's not.  The only way to get this to work is to only put the one hour song on your Shuffle. 
    B-rock

  • Over-view discussions of working through the whole suite of programs?

    One things these forums do is allow detailed discussions of say, how to do X task in Y software.
    BUT ... the whole "suite" of video programs is designed for an over-arching process, and I can't find ANYWHERE that the main process is being discussed. Just the bits and pieces of how to use each separately, or perhaps get from one program to another's tool-set & back the easiest and quickest.
    Where does one go to improve one's use of the suite as a suite? Going from Story to Prelude to PPro to Ae to PPro to Sg to PPro to Audition to PPro & off to AME?
    Neil

    I'm not sure what others are using but this is my workflow having worked with the CC suite for less than a year:
    I don't really bother with Prelude as I find Premiere does everything and more, but theoretically I could log, marker, do some (horrible) speech recognition and transcribing before scooting rushes on to Premiere. Prelude occasionally comes in handy for batch transcribing rushes that need to be passed on to facilities without native NLE's. I personally think it's pretty redundant, but happy to be corrected.
    So just import, log, edit in Premiere. Temp titles, effects and rough mix all done in Premiere.
    Specific VFX shots are dynamic linked to AE for more intensive work. Graphics are all prepped in Illustrator and Photoshop prior to importing into AE as layered comps. The links are then just updated in Premiere - no rendering out (at least from AE - all links still need rendering in Premiere for RT playback).
    Send audio clips to Audition that need work (ie. noise reduction, dynamics, leveling off). Save and update in Premiere. I render down my Premiere audio timeline for a final mix and normalise in Audition, but I'm sure there's a more efficient way of doing this.
    I still find Speedgrade a little clunky and foreign, so I'll typically dynamic link shots off to AE that need intensive grading work. I'm familiar with the AE toolkit and find I can pull keys, window and track to my hearts content easily within it. (Still haven't found a grading package as user friendly and efficient as Resolve yet).
    Final checks in Premiere of the finished pictures and mixed audio track before sending off to AME for encoding for delivery. If going to a DVD I'll run the encode through TMPGEnc instead of AME as I find it handles the detail significantly better. DVD builds are still done in DVD Studio Pro, 6 years old and going strong.
    And there you go.. a typical job can round trip through 6 - 7 programs quite happily. And the thing I'm loving about the Adobe suite is I injest the shoot content and then render out the final delivery and that's basically it.. no data ballooning in post, no transcoding, no render versioning, no writing out to export, and all largely non-destructive. Compared to the previous FCP/AE workflow I estimate I'm saving about 2.5x the drive space I used to use by having to transcode to Prores first. Makes me happy, makes my tape backup library happy, makes my relaxed server drives happy.
    Anyone have any workflow variations, tricks or time savers they'd like to share?

  • IPad starts (only the logo shows up) but shuts down after approximately 10 secs.

    My iPad turns on, the apple shows up and shuts down immediatly afterwards. It does the same thing on and on until the battery runs out. I've tried everything written on the net and on your site (recovory mode etc..). Help anyone? Thank you !

    Help!
    My powerbook starts fine boots the system. gets as
    far as when the system shows the right hand dropdown
    menus then blacks out. some times the screen flickers
    first. It then will not start again unless I reset
    the PMU. then It starts fine only to repeat the
    problem.
    I have tried it with another adapter, and its the
    same.
    I've tried several PMU resets, and pram reset.
    unplugged it for several hours with he battery out
    programmmers button etc. But the problem persists.
    Any suggestions at all are welcome
    further to my first description, the powerbook will run start up of the battery the go to permanent sleep after a few minutes.
    also and wierdly, its will run ok with the power plugged in for as long as the battery charge lasts. Then it does something similar to sleep. but without thesleep light.
    I'm am really scratching my head here.
    Any feedback would be gratefully recieved

  • The first generation mac pro shuts down after start up suddenly

    I have had mac pro since 2006 and have used it so many times without any problems starting up/booting successfully. Recently it was not booting well and i done pram clearance and worked for a while. Once after going into the desktop the screen just froze and i could hear a repeatitive clicking sound from the computer. I was able to shut down and did not use the computer for some time. i have tried to switch it on today and it goes through the normal dong sound and apple logo appears plus a grey bar underneath which fills to a bit and then there is a change in sound in the computer as if something coming to off and then there is the same repeated sound of faint clicking and the computer shuts down. can please anyone help me how to sort the problem out?

    Raj Karia wrote:
    how do i carry this operation out?
    Your machine info has changed from 10.6 to 10.3. No MBP ever shipped with 10.3, so I'm including directions for 10.6:
    Repair Disk: Boot from install disc (insert disc>restart>immediately hold down c key and keep holding it until you see “Preparing Installation”)>at first screen select the language and click Continue> click on the Utilities Menu in the menu bar>open Disk Utility>select your HD in the panel on the left side>click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility such as DiskWarrior or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD (repair utilities can only repair the directory structure, not the HD itself). When this is finished, quit Disk Utility, quit the installer, and restart. Once booted normally, go to Applications>Utilities>Disk Utility and run Repair Permissions.
    how do i open up the disk drive?
    Not sure what you mean by this.

  • Airport Express Music Distribution shuts off after a few seconds

    I am using iTunes as a music server for my entire house and have three Airport Express units feeding three different music systems. These worked fine for a long time, and all of a sudden each system will start playing and then cut out after between 3 and 15 seconds. The AE's then disapear from the speaker list on iTunes.
    I can reset the AE units through either the Airport Admin Utility or powering down and up. Then they reappear, but the same problem persists. This happens if I use one or any combination. I don't believe that anything else in the network has changed, except that the 7 Macs have all been updated to OS 4.3.8 and all other recommended software updates have been performed.
    G5 Mini   Mac OS X (10.4.8)   iTunes 7.0.1

    Hi,
    I had similar issue on a smaller network. After hours and hours on try to resolve this issue on the software side, I found it to be "only" interferance.
    Maybe your isssue is different but here is a quick test if you have a portable computer; just place you in front of your AE and see if it still cuts. If it is not, you can suspect wireless interference.
    Besides your multiple AE, do you have another wireless router?
    Wireless interference may come from wireless phone, neightboor wireless network, microwave, etc. In the case you found this to be related, you may try different channel but remember that only channel 1, 6 and 11 are not overlapping.

  • PC Suite 6.86.9.3 - Music Manager shuts down.

    I just bought the nokia n73 ME, and I downloaded the PC suite 6.86.9.3 from the net. However when I try to use the Music Manager to transfer music, after I select the songs and choose copy to the phone, my music manager shuts down.
    Please advise if there is a bug in the PC Suite. I have re-installed the PC Suite back on my phone, and tried everything...PLease advise.

    Hi,
    I am using an USB connection. And just to give you some more details, I am using windows xp with 256 MB Ram.
    What I tried was copying the files from my pc and pasting it in the music folder using the file explorer...!! and it worked fine...!! but now, if I need to set a message tone as one of those songs {from profiles-general-message tone} none of those songs appear in the default list...which I think it should...
    Is it because I transfered the music the other way and not using the Music manager? and is there a fix or any other way that u can think of being able to see those transfered song in the default list to be able to choose them as a message tone?

  • Is my apple MacBook Pro laptop compatible with the new Creative Suite 6 program??

    I own a Apple MacBook Pro laptop i currently have the operating system Mac OS X Lion 10.7.5.
    my laptop is 13 inch laptop not a 15 inch.
    Here is the following info about my apple computer below:
    Processor  2.5 GHz Intel Core i5
    Memory  4 GB 1600 MHz DDR3
    Graphics  Intel HD Graphics 4000 384 MB
    Software  Mac OS X Lion 10.7.5 (11G63)
    I want to make sure that the new Creative Suite 6 program is compatiable with my apple
    computer before i buy it. my mother last year had brought me the creative suite 5 program
    for my Dell Desktop computer however, this computer later on crashed and now i am stuck with
    the CS5 program my mother brought because, this version of this program she brought is
    only for a desktop computer that has a windows operating system not for a apple
    computer that has a mac operating system. At the time my mother nor i knew if, i
    would be getting a new apple computer plus, i needed the program for school so that i
    could work on homework assignments at home. Now i am currently stuck with the
    windows version of the CS5 program which i cannot use at all. I tried to install it onto
    my apple laptop many times before but, i only ended up getting a error message saying
    that the software I had wouldn't install to the computer for some reason unexplained.
    Message was edited by: mzpretty3

    Hi mzpretty3
    Please See the Minimum System requirements for CS6 : http://helpx.adobe.com/x-productkb/policy-pricing/cs6-system-requirements.html

  • My apple streamer keeps on shutting down after 20 mins iv changed the energy saver etc it still does it any help

    my apple streamer continues to shut off after 20 mins, Iv vhanged my energy saver and displays, any help

    Just to be clear;
    Does it only shut down after twenty minutes when your Apple TV is streaming from the computer, or does it shut down after twenty minutes under any circumstances.
    When you say shut down, do you mean the computer shuts down, goes to sleep or crashes.

  • Pse trial v12 installed but when opening the editor it shuts down after 2 seconds, what can be the problem? I have windows 8.1 64 bit with the latest video drivers installed. Thanks

    PSE trial 12 installed just fine but when i start the editor it opens and shuts down after about 2 seconds without an error, the only thing that appears is a message with 'continue trial'.
    I have windows 8.1 64 bit and i already installed the latest video drivers, intel hd 4000 and nvidia geforce 710M.
    I also installed premiere elements version 12 with the same problem.
    What can be the problem here, please help?
    Thanks.
    Wim.

    Hi roberto-
    Yes, its a shame. I have also contacted lenovo support hoping that they can sort out this problem. However, first response from them was 'contact your internet service provider since internet connectivity goes down'! :-/ I am hoping I have been able to get through to them now at least about where the problem lies. I wonder if anyone has tried using the laptop with the same broadcom wireless adapter with some other version of OS (linux, windows 7 etc.) and whether they still face the same problem. I haven't tried that yet. If this is just an OS / driver issue I hope someone somewhere is working on a fix! If not, I guess the only other solution would be to get an external USB wifi adapter but that is not something one would want to do when you buy a brand new Lenovo laptop. This was a big let down for me.
    -sag

  • Can we make ABAP programs Unicode enable after  SAP sys is converted to uni

    Hello Experts,
    Can we convert the Non Unicode ABAP programs to Unicode after upgrading non unicode SAP system to Unicode?
    Is there any serious problem?
    If Non Unicode SAP is upgraded to Unicode without converting all non unicode ABAP programs to Unicode.
    Thanks in advance.
    Hari

    Hi
    There is no need of correcting the programs from Non unicode to Unicode
    After migrating the system from non Unicode to Unicode you have to run certain Notes (which will be done by Basis) to take care of this.
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Starting up and shuts down after 30 seconds

    My powerbook started doing this. It's starting up, you hear the chime , then the spinning thing with the gray screen, then it shuts down after about 30 seconds.
    I did try a few things that I've read in different threads. I can do the single user mode and the black screen comes I can type the things from this thread but it doesn't look it works.. https://discussions.apple.com/thread/1801027?threadID=1801027 . I did type those commands w/wo the "+" signs.
    Please help

    The plus signs were remnant discussion formatting keys and are not part of the commands.
    OK, here goes on what to do.  Boot into single user mode.  Then try the following  command
    /sbin/mount   -uw   / <enter>
    which mounts the boot volume as write-enabled (it normally comes up read-only to begin with) then this command:
    /sbin/fsck   -fy   / <enter>
    And let it attempt the repair of the boot volume.  It will either report that the volume is OK or that it has been repaired.  If it has been repaired, then repeat the second command until it just says things are OK.  Please post the results.
    Note that usually, in single-user mode, those commands will appear as an advisory just before the first terminal prompt.

Maybe you are looking for