HELP! Themes not installed?

I just tried to "send" a slideshow to a DVD from iPhoto. It stops and says "No themes installed" and suggests I look for them. I did. They are there in a "previous version" I had lots of problems with mail, and after muany machinations from support wound up installing Snow Leopard.
Anyway, now a lot of my apps don't work, and "Finder" locates them in "a previous version"
Can anyone tell me how to get "themes" to work?
Many thanks.

Click here for a discussion on resolving this issue
LN

Similar Messages

  • When starting Window XP on my laptop (which was connected, in the past, in a wi-fi network now no more available) appears immediatly this allert: "iTunes Helper was not installed correctly. Please reinstall iTunes. ERROR 7."  Reistallation impossible!

    When starting Window XP on my laptop (which was connected, in the past, in a wi-fi network now no more available) appears immediatly this allert: "iTunes Helper was not installed correctly. Please reinstall iTunes. ERROR 7."
    Reistallation of older or up to date  iTunes versions is impossible because: "Installation package iTunes.msi is located on a network resource not available" and because "It is impossible to remuove thew previous verson of iTunes. Impossible fto find the path."
    Someone can help me ???
    Thank,
    Gerald

    Take a look at iTunes for Windows: "Error 7" message when opening iTunes. Perhaps your .NET Framework needs a repair.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Itunes helper was not installed correctly. Error 7 (windows error 14001) ?

    Upgraded to ITUNES 10 and received following error - Itunes helper was not installed correctly. Error 7 (windows error 14001) - have tried uninstalling all APPLE products, restarting etc and installing ITUNES and QUICKTIME separately yaddah yaddah - NO SUCCESS. Losing patience ?

    have tried uninstalling all APPLE products,
    Doublechecking. Were you using the instructions from the following documents?
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    (Doublechecking, because an error 7 off ituneshelper normally indicates trouble with Apple Application Support. If something else is going on, it's pretty exotic.)

  • Tried to download itunes. but itunes helper was not installed

    tried to install itunes but had an error code 1400. itunes helper was not installed.

    have tried uninstalling all APPLE products,
    Doublechecking. Were you using the instructions from the following documents?
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    (Doublechecking, because an error 7 off ituneshelper normally indicates trouble with Apple Application Support. If something else is going on, it's pretty exotic.)

  • DW CS6 Help is not installed, Mac, USA?

    How can I get DW help installed?
    I had Dreamweaver CS4, now bought CS6, which I installed last night. There is no option for installing help but DW says it is not installed.
    Tried opening dreamweaver_reference.pdf online in Safari, saved the file Acrobat can open the pdf. I need to use help whether I am online or offline. It would be nice to launch it from within DW.
    Message was edited by: Wholeo, got PDF downloaded

    Thanks for the confirmation. I did manage to get a pdf that Acrobat opens. It is for the cloud (12.1) version and doesn't match my non-cloud version. I'm also puzzled why Safari can't "Save As" the pdf that I'm looking at online. I will keep looking for the DW 12.0 version of pdf help.
    I can see that Adobe wants us to see the latest and greatest help and not be mired in outdated help on our offline computers. But the way the community help is structured for me is bizarre. I'm always getting an answer for a different product or version. I haven't learned how to keep the online help focused.
    For a simple example, I don't want borders around my images. I see there is a CSS path of defining borders. But at the moment I just want to put "0" in the Properties box for my image. But there is no choice for border. Even when I edit the code and the img has the border attribute, it doesn't show in the Properties box. But the PDF help says it is.
    OK, I'm just building up to blow the new software frustration tank overflow valve. I suppose and hope that in two minutes I will find some icon or clue as to how to reveal desired properties.

  • BT Desktop Help will not install on 64-bit Windows...

    I had BT Infinity installed yesterday. I cannot get BT Desktop Help to install properly on my system; Windows 7 64-bit. It seems to install but when it runs I get a message that the software is out of date, but it will not download a newer version. I have installed the latest version from the web.
    Here is the message:
    BT Desktop Help Install
    We have detected that the latest version of BT Desktop Help is not currently installed on your computer, to install it now follow the steps below :
    Step 1
     Click here to download and install the BT Desktop Help
    Clicking on the download link does nothing.
    Software has installed and runs on my other system which is Windows 7 32-bit. The only difference I can see is that the one with the problem is 64-bit.
    Solved!
    Go to Solution.

    if you are trying to install the BT cd then to recommendation of the forum is not to bother as it can cause problems with wifi connection.  you can select specific parts if there is something you especially want
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • DW cs3 help files not installed

    DW CS3 F1 does not work. . . files not installed. Am I
    missing something? I began to reinstall dw but did not see a custom
    or options so I backed out. Any ideas?

    Not suite...I installed DW CD only and all its apps. like
    Bridge etc.
    I press F1 and I do get the help viewer, but it says files
    not available, and I searched *.chm files only found xmxml.chm or
    something like that (sorry not at that PC now).
    I am not squeemish about installing software, but with adobe
    I am extremely cautious. My last resort is to
    deactivate/un-register license and reinstall.
    quote:
    Originally posted by:
    Newsgroup User
    Did you install just Dreamweaver or the whole CS3 Suite? I
    can't say .. F1
    opens the Adobe Help Viewer 1.1 for me with Dreamweaver
    selected.
    Nancy Gill
    Adobe Community Expert
    Author: Dreamweaver 8 e-book for the DMX Zone
    Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
    2003)
    Technical Editor: Dreamweaver CS3: The Missing Manual,
    DMX 2004: The Complete Reference, DMX 2004: A Beginner's
    Guide
    Mastering Macromedia Contribute
    Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
    Web Development
    "iigman" <[email protected]> wrote in
    message
    news:fn6gml$25i$[email protected]..
    > DW CS3 F1 does not work. . . files not installed. Am I
    missing something?
    > I began to reinstall dw but did not see a custom or
    options so I backed
    > out. Any ideas?

  • Themes not installed

    I thought I installed the latest iLife 11, but on the eve of my grandson's 4th birthday, I CAN NOT CREATE DVDs of the iMovies I have spent days putting together!
    As a matter of fact, I KNOW I installed iDVD thrice, correctly. The message told me I was successful. However, the message I have "No Themes Installed" will not let me past the gate to happiness.
    Help me, or put your name on the list of people I will donate this iToy to.
    Bear in mind, you may receive this monster in tiny pieces.
    Is it my altitude? Did I offend Job? I just want to make a **** DVD of three movies of dump trucks, fire trucks, and rescue craft. You get thei pic? If not, wiat a generation.
    It did work wonderfully before I upgraded to 11!  Upgrades are my downfall!
    Peter

    Thanks, Bengt.
    Actually iDVD was in the apps folder, and would start up only to ask for location of the Themes. If I tried from iMovie, same thing.
    When I woke up this morning and looked at the dark ceiling, I imagined what Support would say, and I realized I needed to trash the copy and reinstall. I had only repaired before. The reinstall, plus the updates worked.  I then copied all the old themes to the new library. I am happy at the moment!
    Thanks! Case Closed.
    Peter

  • Themes not installing

    Unable to install themes on BB 8900 ... no error message.  App world says theme has been installed but does not show up in Themes menu
    Pls help

    if expired certificate comes up change your date back one year some cases you may need to change it 2 years back you can do this in time and date settings some themes maybe sisx and need to be signed or phone will not support them
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Help: can not install ODI on SuSE Enterprise 10

    I'm trying to install ODI 10.1.3.2.0 on SuSE Enterprise 10
    Linux bottrop 2.6.16.21-0.8-smp #1 SMP Mon Jul 3 18:25:39 UTC 2006 i686 i686 i386 GNU/Linux
    but i get the following error:
    oracle@bottrop:~/tmp/setup/linux_i386> ./setup.bin
    Preparing to install...
    Extracting the JRE from the installer archive...
    Unpacking the JRE...
    Extracting the installation resources from the installer archive...
    Configuring the installer for this system's environment...
    awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
    dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
    basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    Launching installer...
    grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /tmp/install.dir.17655/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    If i activate the LAX_DEBUG environment variable i get
    oracle@bottrop:~/tmp/setup/linux_i386> LAX_DEBUG=TRUE ./setup.bin
    Preparing to install...
    Checking for POSIX df.
    Found POSIX df.
    Checking tail options...
    Using tail -n 1.
    True location of the self extractor: /home/oracle/tmp/setup/linux_i386/setup.bin
    Creating installer data directory: /tmp/install.dir.17799
    Creating installer data directory: /tmp/install.dir.17799/InstallerData
    Gathering free-space information...
    Space needed to complete the self-extraction: 620529 blocks
    Available space: 162608560 blocks
    Available blocks: 162608560 Needed blocks: 620529 (block = 512 bytes)
    Computed number of blocks to extract: 1025
    Extracting the JRE from the installer archive...
    Extracting JRE from ./setup.bin to /tmp/install.dir.17799/Linux/resource/jre_padded ...
    Extracting done, exit code = 0
    Extracting JRE from /tmp/install.dir.17799/Linux/resource/jre_padded to /tmp/install.dir.17799/Linux/resource/vm.tar.Z ...
    Extracting done, exit code = 0
    Unpacking the JRE...
    Unpacking the JRE...
    gzip is /usr/bin/gzip
    GZIP done.
    TAR done.
    Extracting the installation resources from the installer archive...
    Extracting install.zip from ./setup.bin to /tmp/install.dir.17799/InstallerData/installer.padded ...
    Extracting to padded done, exit code = 0
    Extracting from padded to zip done, exit code = 0
    Creating disk1 data directory: /tmp/install.dir.17799/InstallerData/Disk1
    Creating instdata data directory: /tmp/install.dir.17799/InstallerData/Disk1/InstData
    Extracting resources from ./setup.bin to /tmp/install.dir.17799/InstallerData/Disk1/InstData/Resource1.zip ...
    Extracting done, exit code = 0
    Configuring the installer for this system's environment...
    ========= Analyzing UNIX Environment =================================
    Setting UNIX (linux) flavor specifics.
    Importing UNIX environment into LAX properties.
    Checking for POSIX awk.
    ========= Analyzing LAX ==============================================
    LAX found............................ OK.
    LAX properties read.................. OK.
    ========= Finding VM =================================================
    Valid VM types.......................... J2
    Absolute LAX_VM path.................... /tmp/install.dir.17799/Linux/resource/jre/bin/java
    Expanded Valid VM types................. JRE_J2 JDK_J2
    * Using VM.....(lax.nl.current.vm)...... /tmp/install.dir.17799/Linux/resource/jre/bin/java
    checking for NPTL + JVM vulernability...
    NPTL detected! checking for vulnerable JVM....
    awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
    major :
    minor :
    patch :
    vendor:
    Vulnerable JVM detected... implementing workaround
    ========= Virtual Machine Options ====================================
    LAX properties incorporated............. OK.
    classpath............................... "/tmp/install.dir.17799/InstallerData:/tmp/install.dir.17799/InstallerData/installer.zip"
    main class.............................. "com.zerog.ia.installer.Main"
    .lax file path.......................... "/tmp/install.dir.17799/temp.lax"
    user directory.......................... "/tmp/install.dir.17799"
    stdout to............................... "console"
    sterr to................................ "console"
    install directory....................... ""
    JIT..................................... none
    option (verify)......................... off
    option (verbosity)...................... none
    option (garbage collection extent)...... none
    option (garbage collection thread)...... none
    option (native stack max size).......... none
    option (java stack max size)............ none
    option (java heap max size)............. 50331648
    option (java heap initial size)......... 16777216
    option (lax.nl.java.option.additional).. none
    dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
    basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    ========= Display settings ===========================================
    hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    X display............................... remote
    WARNING: The name of this host () and the setting
    of this shell's DISPLAY (localhost:10.0) variable do not match.
    If this launcher is being displayed to a Microsoft Windows desktop
    through X Windows the Java Virtual Machine might abort. Try running
    this installer locally on the target system or through X Windows to
    another UNIX host if the installer unexpectedly fails.
    UI mode................................. gui
    Launching installer...
    ========= VM Command Line ============================================
    options: -Djava.compiler=NONE -Xmx50331648 -Xms16777216
    CLASSPATH:/tmp/install.dir.17799/InstallerData:/tmp/install.dir.17799/InstallerData/installer.zip:
    grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    ========= Forking JAVA =============================================
    /tmp/install.dir.17799/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    Did not found any information/help about this issue! Can somebody help?

    i am getting the same thing but with my ipad. i've successfully downloaded the siriusxm internet radio app to my iphone, but i can't to my ipad. just like you, the app is greyed out on my ipad. any suggestions?

  • Help Will Not Install ITunes 7.3

    This is a problem I can install ITunes at all cause it can not unistall the older version, this is frustrating, I tried to uninstal the old one and it can not be found. Help...What do I do? Thanks..

    replying to Cynthia-Avey
    Yes and in Quick Time as well...But yes I am getting that error...
    okay. in that case we'll try the procedure from the following post:
    http://discussions.apple.com/click.jspa?searchID=-1&messageID=3568566
    (since you're getting a QuickTime.msi message, you won't be able to uninstall QuickTime from add/remove ... no problems, you just have to skip ahead to removing the installation configuration information with Installer CleanUp, and then manually removing the left-over program files.)

  • Please Help - Can Not Install Flash

    This is not about downloading or uninstalling,this is about getting flash installed.
    I have a Power Mac G4 with 10.5.8 I was trying to install the latest version of Flash Player and it did not work.
    I used uninstaller,then downloaded - install_flash_player_10_osx.dmg.- Everything went fine until the end. I got a - The following install step failed:run postflight script for plug in.
    Then I downloaded - flashplayer10_1r102_64_ub_mac.dmg - opened it,right clicked on it and went to "Show Contents" then "Resources" and tried installing - Adobe Flash Player.pkg. I got a - You cannot install PlugIn on this volume. A newer version of this software already exists on this volume. Even though I used uninstall to get rid of all Flash beforehand.
    So now any website that need flash player I can not use.I have looked all over this web site for an answer.Please help me get flash player reinstalled,the lattest version if possible.

    Via Javascripting. Look for Flash detection kits at the
    Adobe/Maromedia web
    site and also at Internet search engines.
    As well this forum focuses on database access issues and you
    might find more
    takers for this type of question in the Flash General forum.
    Lon Hosford
    www.lonhosford.com
    May many happy bits flow your way!
    "jiby" <[email protected]> wrote in message
    news:e3odp2$pdc$[email protected]..
    Hi,
    Please help
    How can I install flash player plugin (version 8) in browser
    without
    downloading setup or redirecting to macromedia site if flash
    plugin is not
    available in browser
    Thanks

  • Just recently iTunes has been giving me this error message: "iTunes helper was not installed correctly." And then another message on top of that: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 14001)

    I have tried everything ....I need step by step instructions because I need my itunes back up and running! thanks

    im getting the same error,but the update windows .NET framework is still not working, downloaded 2 Microsoft .net framework as suggested by apple support KB article, no go, didnt try creating a new user yet but since its still not working as tested its no use.please help need to update get my iTunes back and update my devices to iOS 5. reinstalled Quicktime and give me error : Please install Apple Application Support.  TWO days now im getting crazy. no itunes no Quicktime, possiby no apples in the future

  • Please help - can not install modem drivers

    I recently installed an external hard drive.  For some reason that seems to have erased the Westell 6100 modem set up/ drivers.  I tried re-installing using the Verizon cd, but when I click account set up I get a message that I do not have administrative privileges.  I checked and I am in fact still the administrator.  Any thoughts on how to fix or why installing the back up drive would do this?  I know my DSL connection is still good because wifi is working.  This is on a MAC computer.  I called Verizon which was a joke.

    By what you said, it sounds like you are using some sort of Wireless NAT router.
    If you are using a Wireless NAT router to handle the public IP like I suspect, you do not need to install any drivers for that Westell 6100 modem.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • No Printing because "Themes not Installed"

    I have searched the forums for info but noting helps.
    The themes folder is where it should be i.e. HD/Library/Application Support/iPhoto/Themes.
    So, how do I force iPhoto to accept that the themes are there?
    BTW, printing works from Aperture iMac 27" and from iPhoto on the other macs.
    Any help would be appreciated.
    Joe

    Check out OT's post in this thread:
    http://discussions.apple.com/thread.jspa?messageID=6394288&#6394288
    Also, note his comments here:
    http://discussions.apple.com/thread.jspa?messageID=6998840&#6998840
    Look in your User/Library/Application Support/iPhoto folder for a Themes folder. If you find it there move it to the HD/Library/Application Support/iPhoto folder and reboot. Then try iPhoto again. That may save you having to go thru the reinstallation.
    Regards
    TD

Maybe you are looking for