Help! Thinkpad X60 fingerprint scanner problem! deleted fingerprints
Right, basically what happened is that i was logged into my account one day and i wanted to stop using the fingerprint scanner to log in. So i deleted my fingerprints unbeknown to me that doing so does not deactivate the fingerprint software therefore i am stuck at the log-in screen that says please swipe your finger. One mroe thing, it will not let me use my windows password because i did not delete the password for the fingerprint scanner i just removed the prints. Any help would be appreciated
Alex
Hi Alex,
Try clicking on the username. See if that brings up the option for the password.
If that doesn't work, go into the bios, (F2 at the splash screen) and click Security. Click Fingerprint and disable the Predesktop Authentication. See if you're able to logon then.
If you still can't logon, reboot and at the splash screen press F8 and that should put you in safe mode. See if you can log in then. On my X60t the fingerprint reader is disabled in safe mode. You might be able to go into the fingerprint software and turn off the fingerprint reader. Whatever you do, don't try to uninstall it. It won't totally uninstall that easy.
If none of this works, reboot and press F8 again. You could try a system restore from the screen that comes up. That's if you have a restore point back before the prints got deleted.
Good luck, let me know how you make out.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Similar Messages
-
HP Envy 15-007tu Notebook PC biometric Scanner Problem
Hi, i am facing a problem. this is second time i am facing problem related to Biometric Scanner. My Laptop is HP Envy 15-007tu Notebook PC and Biometric Scanner is not working. please send me link for all drivers of HP Envy 15-007tu Notebook PC biometric driver and help me out of scanner problem.
Hi,
Please try:
For Windows 8 & 8.1:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03718240
For Windows 7, Vista & XP:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02519007
Good luck
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Lenovo Thinkpad X201 fingerprint software
Hello all, I would like to ask about the fingerprint software that installed on thinkpad X201. Is this software have feature to encrypt files/folders using fingerprint authentication? If don't have, is there any way to have this feature that can be use on this machine? Thanks in advance for your help.
Well Lenovo Fingerprint Software is UPEK software with Lenovo skin implemented and few changes in configuration. Anyway, UPEK software has function called Secure Safe, this is virtual drive, content stored in encrypted file. On my Thinkpad i use Bitlocker for encryption, but this is only available on ultimate version.
Lenovo T440s, 20AQ0067MC, Windows 8.1 Pro x64 UEFI, Samsung 840 EVO SSD 250 GB, 8 GB RAM
Lenovo T430s, 2356LQG, Windows 8.1 Pro x64 UEFI, Intel 520 SSD 180 GB, 8 GB RAM
Lenovo T420s, 4171-6SG, Windows 8 Pro x64 UEFI, Intel 320 SSD 120 GB, 8 GB RAM
Lenovo T400s, 2808-CYG, Windows 7 Ultimate x64 -
Problem deleting songs---HELP!!!
I'm having problem deleting songs,when i select the ipod icon in the screen of ituns i can't select NOTHING FROM THE LIST,and in the lower right hand a "lock" is locked,(is next to the GB numbers.Can anyone help me to unlocked that thing?
Oh i almost forget, i'm sure that the hold button isn' he reason for this,coz i checked that it wasn't locked.Welcome to Apple Discussions!
Try unchecking the songs you want deleted in your iTunes library. Then connect the iPod and go to edit-->preferences. Hit the iPod tab. Check "Only update checked songs". Click OK.
Here are some other options...
Deleting Songs or Playlists from your iPod
Finally, you cannot select anything under the iPod because you are automatically updating. That is normal behavior.
btabz -
hello everyone...I got my very first macbook pro just today and i have a problem deleting the "test" user account. if i can't delete it, the system won't let me turn off the system. I don't know what to do! HELP!!!!
Have you created another admin user? Go to system preferences click users and click the + to add a user; if you haven't already. Once you have another admin user other then the "test" user make sure you're signed out of the test user account. Sign in with the alternate ADMIN USER that you just created or had created already and go back to SYSTEM PREFERENCES and click the same USERS icon near the bottom. Now select the TEST user and click the - sign. This should prompt you if your sure you want to delete the user account. And your done.
New User created and Test User deleted... I hope this helps. -
I'm having problems deleting a app please help
I'm having problems deleting a app it shows as if downloading and when I try to delete it it doesn't
Reboot the iPad.
-
[SOLVED] ACPI handler.sh no longer working (Thinkpad X60 Tablet)
Hello there,
I recently did a few updates on my system to reduce power usage and get hdaps working. For some reason one of these changes must have broken ACPID in some way so that what I wrote in handler.sh no longer has any effect when I e.g. press the configured buttons to lock my screen or shut down, but I have no clue which.
I'm not really familiar with where ACPI and ACPID keeps all their logs either, and which parts in there might mean something for me. I don't even know how I can check if ACPI is running properly and just ACPID isn't, for instance (both are running thought, confirmed with ps -A).
Here's what I can remember of what I did:
-full system update
-install cpufreq to redcude power usage with acpi_cpufreq
-install HDAPS with Thinkpad driver, as described on the Wiki
-tweak my laptop-mode settings, e.g. disable VGA output when in laptop mode
-enable AHCI for my hard drive in kernel image and BIOS
Would be great if you could help me troubleshoot this somehow, as I really don't have a clue on how to fix this. Here's some output that might be helpful for starters:
cat /etc/acpi/handler.sh
#!/bin/sh
set $*
case "$1" in
button/power)
#echo "PowerButton pressed!">/dev/tty5
case "$2" in
PWRF)
#Power off
shutdown -h now
logger "ACPI action undefined: $2"
esac
ibm/hotkey)
#echo "Display swiveled">/dev/tty5
case "$2" in
HKEY)
case "$4" in
00005009)
#Swiveling down
/bin/sh /etc/acpi/actions/swivel-down
0000500a)
#Swiveling up
/bin/sh /etc/acpi/actions/swivel-up
00001002)
#Lock screen
xscreensaver-command -lock
#run_once xtrlock &
00001004)
#Standby button
xscreensaver-command -lock ; s2ram
00001005)
#Network button
/etc/rc.d/net-auto-wireless restart
00001009)
#Reboot
shutdown -r now
00007000)
#WLan button switched
/etc/rc.d/net-auto-wireless restart
fi
esac
esac
button/sleep)
case "$2" in
SLPB) echo -n mem >/sys/power/state ;;
*) logger "ACPI action undefined: $2" ;;
esac
ac_adapter)
case "$2" in
AC)
case "$4" in
00000000)
#laptop mode should take care of this alone!
#/etc/rc.d/laptop-mode start
00000001)
#/etc/rc.d/laptop-mode stop
esac
*) logger "ACPI action undefined: $2" ;;
esac
battery)
case "$2" in
BAT0)
case "$4" in
00000000) #echo "offline" >/dev/tty5
00000001) #echo "online" >/dev/tty5
esac
CPU0)
*) logger "ACPI action undefined: $2" ;;
esac
button/lid)
#echo "LID switched!">/dev/tty5
case "$2" in
LID)
if [[ `cat /proc/acpi/button/lid/LID/state | awk '{print $2}'` = "closed" ]]
then
#run_once xtrlock &
xscreensaver-command -lock
fi
esac
logger "ACPI group/action undefined: $1 / $2"
esac
dmesg | grep acpi
BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI data)
BIOS-e820: 000000007f6df000 - 000000007f700000 (ACPI NVS)
modified: 000000007f6d0000 - 000000007f6df000 (ACPI data)
modified: 000000007f6df000 - 000000007f700000 (ACPI NVS)
ACPI: RSDP 000f67c0 00024 (v02 LENOVO)
ACPI: XSDT 7f6d11e8 0008C (v01 LENOVO TP-7J 00001140 LTP 00000000)
ACPI: FACP 7f6d1300 000F4 (v03 LENOVO TP-7J 00001140 LNVO 00000001)
ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526)
ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20090903/tbfadt-557)
ACPI: DSDT 7f6d1690 0D56F (v01 LENOVO TP-7J 00001140 MSFT 0100000E)
ACPI: FACS 7f6f4000 00040
ACPI: SSDT 7f6d14b4 001DC (v01 LENOVO TP-7J 00001140 MSFT 0100000E)
ACPI: ECDT 7f6debff 00052 (v01 LENOVO TP-7J 00001140 LNVO 00000001)
ACPI: TCPA 7f6dec51 00032 (v02 LENOVO TP-7J 00001140 LNVO 00000001)
ACPI: APIC 7f6dec83 00068 (v01 LENOVO TP-7J 00001140 LNVO 00000001)
ACPI: MCFG 7f6deceb 0003C (v01 LENOVO TP-7J 00001140 LNVO 00000001)
ACPI: HPET 7f6ded27 00038 (v01 LENOVO TP-7J 00001140 LNVO 00000001)
ACPI: SLIC 7f6dee62 00176 (v01 LENOVO TP-7J 00001140 LTP 00000000)
ACPI: BOOT 7f6defd8 00028 (v01 LENOVO TP-7J 00001140 LTP 00000001)
ACPI: SSDT 7f6f2603 0025F (v01 LENOVO TP-7J 00001140 INTL 20050513)
ACPI: SSDT 7f6f2862 000A6 (v01 LENOVO TP-7J 00001140 INTL 20050513)
ACPI: SSDT 7f6f2908 004F7 (v01 LENOVO TP-7J 00001140 INTL 20050513)
ACPI: SSDT 7f6f2dff 001D8 (v01 LENOVO TP-7J 00001140 INTL 20050513)
ACPI: Local APIC address 0xfee00000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
ACPI: Core revision 20090903
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
ACPI: EC: EC description table is found, configuring boot EC
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [PUBS] (on)
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
acpi device:01: registered as cooling_device0
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
ACPI: Lid Switch [LID]
ACPI: Sleep Button [SLPB]
ACPI: Power Button [PWRF]
i915 0000:00:02.0: power state changed by ACPI to D0
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ACPI: SSDT 7f6f1ccc 001FE (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
ACPI: SSDT 7f6f1f4f 006B4 (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
ACPI: SSDT 7f6f1c04 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
ACPI: SSDT 7f6f1eca 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
ACPI: Thermal Zone [THM0] (56 C)
ACPI: Thermal Zone [THM1] (59 C)
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
thinkpad_acpi: ThinkPad ACPI Extras v0.23
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7JET29WW (1.14 ), EC 7JHT13WW-1.04
thinkpad_acpi: Lenovo ThinkPad X60 Tablet, model 6363WDK
thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
thinkpad_acpi: ACPI backlight control delay disabled
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
Registered led device: tpacpi::thinkvantage
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
cat /var/log/acpid.log
Feb 28 13:19:28 damnation acpid: exiting
Mar 1 12:48:43 damnation acpid: starting up
Mar 1 12:48:43 damnation acpid: 4 rules loaded
Mar 1 12:48:43 damnation acpid: waiting for events: event logging is off
Mar 1 12:48:44 damnation acpid: client connected from 1737[82:82]
Mar 1 12:48:44 damnation acpid: 1 client rule loaded
Mar 1 12:49:39 damnation acpid: client connected from 2523[0:0]
Mar 1 12:49:39 damnation acpid: 1 client rule loaded
Mar 1 12:49:56 damnation acpid: exiting
Mar 1 12:49:56 damnation acpid: starting up
Mar 1 12:49:56 damnation acpid: 4 rules loaded
Mar 1 12:49:56 damnation acpid: waiting for events: event logging is off
Mar 1 12:49:57 damnation acpid: client connected from 2523[0:0]
Mar 1 12:49:57 damnation acpid: 1 client rule loaded
Mar 1 12:50:01 damnation acpid: client connected from 1737[82:82]
Mar 1 12:50:01 damnation acpid: 1 client rule loaded
Mar 2 10:23:50 damnation acpid: client 2523[0:0] has disconnected
Mar 2 10:23:50 damnation acpid: client connected from 2523[0:0]
Mar 2 10:23:50 damnation acpid: 1 client rule loaded
Mar 2 10:52:18 damnation acpid: client 2523[0:0] has disconnected
Mar 2 10:52:18 damnation acpid: client connected from 2523[0:0]
Mar 2 10:52:18 damnation acpid: 1 client rule loaded
Mar 2 17:00:21 damnation acpid: client 2523[0:0] has disconnected
Mar 2 17:00:21 damnation acpid: client connected from 2523[0:0]
Mar 2 17:00:21 damnation acpid: 1 client rule loaded
Mar 3 09:54:32 damnation acpid: client 2523[0:0] has disconnected
Mar 3 09:54:32 damnation acpid: client connected from 2523[0:0]
Mar 3 09:54:32 damnation acpid: 1 client rule loaded
Mar 3 10:28:14 damnation acpid: exiting
Mar 3 10:28:14 damnation acpid: starting up
Mar 3 10:28:14 damnation acpid: 4 rules loaded
Mar 3 10:28:14 damnation acpid: waiting for events: event logging is off
Mar 3 10:28:15 damnation acpid: client connected from 2523[0:0]
Mar 3 10:28:15 damnation acpid: 1 client rule loaded
Mar 3 10:28:19 damnation acpid: client connected from 1737[82:82]
Mar 3 10:28:19 damnation acpid: 1 client rule loaded
Mar 3 10:37:44 damnation acpid: exiting
Mar 3 10:37:44 damnation acpid: starting up
Mar 3 10:37:44 damnation acpid: 4 rules loaded
Mar 3 10:37:44 damnation acpid: waiting for events: event logging is off
Mar 3 10:37:45 damnation acpid: client connected from 2523[0:0]
Mar 3 10:37:45 damnation acpid: 1 client rule loaded
Mar 3 10:37:49 damnation acpid: client connected from 1737[82:82]
Mar 3 10:37:49 damnation acpid: 1 client rule loaded
Mar 3 12:22:44 damnation acpid: exiting
Mar 3 12:23:44 damnation acpid: starting up
Mar 3 12:23:45 damnation acpid: 4 rules loaded
Mar 3 12:23:45 damnation acpid: waiting for events: event logging is off
Mar 3 12:23:46 damnation acpid: client connected from 3417[82:82]
Mar 3 12:23:46 damnation acpid: 1 client rule loaded
Mar 3 12:24:40 damnation acpid: client connected from 4287[0:0]
Mar 3 12:24:40 damnation acpid: 1 client rule loaded
Mar 3 12:24:55 damnation acpid: exiting
Mar 3 12:24:55 damnation acpid: starting up
Mar 3 12:24:55 damnation acpid: 4 rules loaded
Mar 3 12:24:55 damnation acpid: waiting for events: event logging is off
Mar 3 12:24:56 damnation acpid: client connected from 4287[0:0]
Mar 3 12:24:56 damnation acpid: 1 client rule loaded
Mar 3 12:25:00 damnation acpid: client connected from 3417[82:82]
Mar 3 12:25:00 damnation acpid: 1 client rule loaded
Mar 3 12:40:54 damnation acpid: exiting
Mar 3 12:49:47 damnation acpid: starting up
Mar 3 12:49:47 damnation acpid: 4 rules loaded
Mar 3 12:49:47 damnation acpid: waiting for events: event logging is off
Mar 3 12:49:49 damnation acpid: client connected from 3396[82:82]
Mar 3 12:49:49 damnation acpid: 1 client rule loaded
Mar 3 12:50:12 damnation acpid: client connected from 5224[0:0]
Mar 3 12:50:12 damnation acpid: 1 client rule loaded
Mar 3 12:50:59 damnation acpid: exiting
Mar 3 12:50:59 damnation acpid: starting up
Mar 3 12:50:59 damnation acpid: 4 rules loaded
Mar 3 12:50:59 damnation acpid: waiting for events: event logging is off
Mar 3 12:51:00 damnation acpid: client connected from 5224[0:0]
Mar 3 12:51:00 damnation acpid: 1 client rule loaded
Mar 3 12:51:04 damnation acpid: client connected from 3396[82:82]
Mar 3 12:51:04 damnation acpid: 1 client rule loaded
Mar 3 13:21:42 damnation acpid: exiting
Mar 3 13:21:42 damnation acpid: starting up
Mar 3 13:21:42 damnation acpid: 4 rules loaded
Mar 3 13:21:42 damnation acpid: waiting for events: event logging is off
Mar 3 13:21:43 damnation acpid: client connected from 5224[0:0]
Mar 3 13:21:43 damnation acpid: 1 client rule loaded
Mar 3 13:21:47 damnation acpid: client connected from 3396[82:82]
Mar 3 13:21:47 damnation acpid: 1 client rule loaded
Mar 3 13:22:21 damnation acpid: exiting
Mar 3 13:22:21 damnation acpid: starting up
Mar 3 13:22:21 damnation acpid: 4 rules loaded
Mar 3 13:22:21 damnation acpid: waiting for events: event logging is off
Mar 3 13:22:22 damnation acpid: client connected from 5224[0:0]
Mar 3 13:22:22 damnation acpid: 1 client rule loaded
Mar 3 13:22:26 damnation acpid: client connected from 3396[82:82]
Mar 3 13:22:26 damnation acpid: 1 client rule loaded
Mar 3 13:23:03 damnation acpid: client 5224[0:0] has disconnected
Mar 3 13:23:03 damnation acpid: client connected from 5224[0:0]
Mar 3 13:23:03 damnation acpid: 1 client rule loaded
Mar 3 13:25:00 damnation acpid: exiting
Mar 3 13:25:00 damnation acpid: starting up
Mar 3 13:25:00 damnation acpid: 4 rules loaded
Mar 3 13:25:00 damnation acpid: waiting for events: event logging is off
Mar 3 13:25:01 damnation acpid: client connected from 5224[0:0]
Mar 3 13:25:01 damnation acpid: 1 client rule loaded
Mar 3 13:25:05 damnation acpid: client connected from 3396[82:82]
Mar 3 13:25:05 damnation acpid: 1 client rule loaded
Mar 3 13:29:52 damnation acpid: client connected from 21588[1000:100]
Mar 3 13:29:52 damnation acpid: 1 client rule loaded
Mar 3 13:30:27 damnation acpid: client 21588[1000:100] has disconnected
Mar 3 13:36:15 damnation acpid: exiting
Mar 3 13:37:54 damnation acpid: starting up
Mar 3 13:37:54 damnation acpid: 4 rules loaded
Mar 3 13:37:54 damnation acpid: waiting for events: event logging is off
Mar 3 13:37:56 damnation acpid: client connected from 3419[82:82]
Mar 3 13:37:56 damnation acpid: 1 client rule loaded
Mar 3 13:38:28 damnation acpid: client connected from 4292[0:0]
Mar 3 13:38:28 damnation acpid: 1 client rule loaded
Mar 3 13:39:24 damnation acpid: exiting
Mar 3 13:39:24 damnation acpid: starting up
Mar 3 13:39:24 damnation acpid: 4 rules loaded
Mar 3 13:39:24 damnation acpid: waiting for events: event logging is off
Mar 3 13:39:25 damnation acpid: client connected from 4292[0:0]
Mar 3 13:39:25 damnation acpid: 1 client rule loaded
Mar 3 13:39:29 damnation acpid: client connected from 3419[82:82]
Mar 3 13:39:29 damnation acpid: 1 client rule loaded
Mar 3 13:44:09 damnation acpid: client connected from 4488[1000:100]
Mar 3 13:44:09 damnation acpid: 1 client rule loaded
Mar 3 13:45:42 damnation acpid: client 4488[1000:100] has disconnected
Mar 3 13:58:17 damnation acpid: exiting
Mar 3 13:58:17 damnation acpid: starting up
Mar 3 13:58:17 damnation acpid: 4 rules loaded
Mar 3 13:58:17 damnation acpid: waiting for events: event logging is off
Mar 3 13:58:18 damnation acpid: client connected from 4292[0:0]
Mar 3 13:58:18 damnation acpid: 1 client rule loaded
Mar 3 13:58:22 damnation acpid: client connected from 3419[82:82]
Mar 3 13:58:22 damnation acpid: 1 client rule loaded
(are all these "client has disconnected" messages normal?)
Last edited by Natanji (2010-03-07 11:03:54)I don't know if it works for everyone but i have just fixed the acpi rotate for my x60t
/usr/bin/xrotate
#!/bin/sh
output=LVDS1
if [ "$XROT_OUTPUT" ]
then
output=$XROT_OUTPUT;
fi
devices="stylus eraser"
geomnbr=0
xrandr=normal
wacom=normal
if [ "$1" == "-" ] || [ "$1" == "+" ] || ! [ "$1" ];
then
operator="$1";
[ "$1" ] || operator='+';
case `xrandr --verbose | grep "^$output " | sed "s/^[^ ]* [^ ]* [^ ]* ([^(]*) \([a-z]*\).*/\1/"` in
normal) geom=0;;
left) geom=1;;
inverted) geom=2;;
right) geom=3;;
esac
let geom=${geom}${operator}1+4
let geom=${geom}%4
else
geom="$1"
fi
case $geom in
1) wacom=CCW; xrandr=left ;;
2) wacom=HALF; xrandr=inverted ;;
3) wacom=CW; xrandr=right ;;
*) wacom=NONE; xrandr=normal ;;
esac
echo "xrandr to $xrandr, xsetwacom to $wacom" >&2
if xrandr --output "$output" --rotate "$xrandr"; then
for device in $devices
do
xsetwacom set "$device" Rotate "$wacom"
done
fi
#workaround for linuxwacom bug
if [ "`xsetwacom get stylus Mode`" == '1' ]; then
for decive in $devices
do
xsetwacom set stylus CoreEvent "off"
xsetwacom set stylus Mode "off"
done
{ sleep 1;
for device in $devices
do
xsetwacom set stylus Mode "on"
xsetwacom set stylus CoreEvent "on"
done; } &
fi
/etc/acpi/thinkpad-swivel-up.sh
#!/bin/bash
XAUTHORITY=/var/lib/gdm/\:0.Xauth DISPLAY=:0.0 /usr/bin/xrotate 0
/etc/acpi/thinkpad-swivel-down.sh
#!/bin/bash
XAUTHORITY=/var/lib/gdm/\:0.Xauth DISPLAY=:0.0 /usr/bin/xrotate 1
The problem was that my acpid starts long before xorg.
System:
Thinkpad x60 tablet
xorg 1.8
acpid 1.0.10 -
Thinkpad X60 - Power Manager issue
Hi,
I just have to install the Power Manager version 1.89 into my Thinkpad x60.
However, it shows the "Black" Triangle which is located next to the power manager guage in the task bar.
Before the installation, I have not this problem. And I am using the genuine battery.
Could anyone help ? Any previous version can I download to avoid that problem?
Thanks,
TleeWhile I see the information of the black triagnle, it shows "my battery can run 3.x hrs, the new battery can run 5.x hrs" and inform the link to lenovo. It seems ask the user to purchase the new battery.
But I want to point out. my battery is in good condition. I think I no need to purchase the new battery at the time.
Now, my battery is suddenly damaged. While I read the my battery information from the power manger, it shows 99% capacity. But the current is " 0 ". It seems the battery is internal locked.
It is not really likes as you said the battery would likely fail soon. Since, I can use it more than 3 hrs continously ( 8Cells)
Also, I searched many posts and indicated that my battery is the detect unit within Lenovo recall program FRU no: 93P5029.
But nobody inform me before. Now, the recall program is expired..............
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67765
PS: my battery first charged at 2006-12 / Cycle count is 134 -
Laptop (thinkpad X60) won't reboot
Hey all,
I finally got around to installing Arch on my laptop; its been running ubuntu these past months. I didn't know this machine could be this fast. ;-) I think its mostly set up now, but I have an odd problem that is related to... what ACPI?
I have a Lenovo Thinkpad X60 Core Duo. Everything worked fine on Ubuntu, but I thought I'd go back to Arch for simplicity and so I'd stop feeling like a hypocrite adminning these forums. And for the speed burst.
My most pressing issue right now is that I can't reboot. 'halt' works just fine, the way its supposed to. 'reboot', however, shuts down the computer, takes me to a message "Restarting System" or some such, and then pauses for several seconds. Then the screen blanks like its in some sort of standby mode, but it hasn't shut down, as the lights are still on and the fans are still running.
My guess is I need to modprobe some module that is missing right now, but I don't know what it might be. Any suggestions?
DustyI've had, or have rather, a similar problem on my old Toshiba laptop. Kernel 2.6.22 seems to be to blame. It doesn't happen often but it does happen. It takes a bit of voodoo to get around it - like shutting the laptop down completely, unplugging and then replugging the power cable and such...
This might or might not be helpful but try booting with "ec_intr=0" kernel command line parameter and see if that changes anything. On my laptop it does help, somewhat (acpi on this toshiba is a mess)... I seem to need to shut the computer down completely before booting the system with this for it to take effect. I know, this is all very strange, but something is better than nothing I guess -
Fan error on IBM thinkpad X60s notebook
When I switch on IBM thinkpad X60s notebook. I can hear a sound from fan like it is try to move and then stop. After awhile an error "fan error" appear on the screen. I would like to know is it related to fan problem? If yes, Do I need to change a new fan? Actually, this notebook is out of warranty. So what will it cost for fan assembly and the labour charge? I live in Johor Bahru, Malaysia. I would like to know is there any service center in Johor Bahru? Thanks for reading and reply to my post.
Apa kabar?
Sounds like you will need another fan installed. If you unit is still under warranty, call your local tech support to assist. I'm not sure about your exact location in Malaysia, but I know that there are some locations in KL.
I was able to find this tech support number in Malaysia for you.
1800-88-1889 (Local number only)
+603 8315 6855 (DID)
Monday - Friday 8:30AM - 5PM
Give them a call for assistance. Best of luck.
Mark
Do NOT PM me with technical issues. Post in the forum for assistance. Thanks -
Help with add file name problem with Photoshop CS4
Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb -
Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem. Thanks.
Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore. -
So when I try to update or download an app it says I don't have enough storage. I don't know how to use iCloud and stuff soo what do I do? Help! I don't wanna delete any pics either.
JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.
-
I plan to replace the OEM hard drive on my ThinkPad X60 with a Western Digital Scorpio Black drive. I found a board posting on Scott Mueller's Upgrading and Repairing Forum site that seems to indicate that APS will work with this drive. Here is my question: Is there any point in purchasing the drive with the free fall sensor option? (This is more expensive than the drive without the sensor.) Will this provide any additional protection above and beyond the Active Protection System. Will the internal free fall sensor in the drive be compatible with APS? In other words, should I buy a Scorpio Black with or without the free fall sensor?
Thanks!Welcome to the forum!
If I were buying a replacement drive, I'd get one without a sensor, but that's me.
Having seen way too many laptops that have gone through a real "free fall" I'll say that a damaged hard drive in such an event is usually the least of one's problems...
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
Problem deleting unused InfoObject
Dear All,
We have encountered a problem deleting an unused InfoObject getting the following messages :-
Data element /BIC/OIPTBTAUDIT still used in table/view STRU_453SRKYRVVCCB1I7ZI5ZXNXRO
Data element /BIC/OIPTBTAUDIT still used in table/view STRU_453TM6SZNZKT8RYRKNBZ0H3G4
Data element /BIC/OIPTBTAUDIT still used in table/view STRU_453TMH1OY4IU2TWBCQGCF3DTG
Data element /BIC/OIPTBTAUDIT still used in table/view STRU_453TNP7PZ3CK6FQ8WLWY8E01G
Now these structures look like transfer structures but we have removed the object from all such structures and have ran where used in RSD1 and this object is not used anywhere !
Please help as this object needs removing and recreating with the same technical name.
You help is much appreciated.
Thanks
Craig
P.S. These structures are marked as Generated structures.
Message was edited by:
Craig ArmsteadGo to the info object in RSA1 in change mode and click edit - where used.
You will get a list of other objects where this object is used.
Delete the data in the cube. Delete the object from the cube and dimension of the cube. If you have more than one cube and ODS that uses this object, pl do the same for cube and ODS.
Remove the object from the comm structure and other data marts.
Delete the data in the info object.
Delete the from the info object.
Now, again go to the info object and see the where used list.
The list should be list.
Now, you are all set to delete the object.
Finally create another one with the same name .
Ravi Thothadri
Maybe you are looking for
-
Adobe Premiere Pro CC constantly crashes when rendering. Please Help!
Hello everybody and thank you for reading! My problem is whenever I use adobe premiere and decide to render my video my computer crashes and always gives me a different error report. Here are a list of all of the error codes I have received: SYSTEM_S
-
Slow motion video. By design or bug?
If I create a slow mo video and share it by iMessage the recipient views it correctly but if I view it in the thread it plays at normal speed throughout. Is this a bug or by design?
-
Oracle 10g installation is hanging in RAC setup..
Hi, I installed 10 clusterware succesfully(10.2.0.1) in linux 4AS. CRS is running successfully in two nodes. i set kernel parmeters and installed require package also.When i am try to install oracle 10g database software(10.2.0.1), it is going fine 2
-
Itu2019s showing confirmed qty more that order qty in sales order
Dear Guru's I am working on production server issue; the issue is delivery has been created more that sales order qty. When I am seeing sales Oder schedule lines itu2019s showing confirmed qty more that order qty in sales order what could be the rea
-
Yesterday it was working fine, this morning I tried to open cs6 and I get the message above. Tried to put the file back in from my laptop ( copied on a thumb drive ) and when I close all the windows the files does not show up again, and ps6 shows me