Help - ThreadDump issue with jstack PID

Hello,
I am not getting thread dump properly in jdk1.5 when I use 'jstack <PID>' I get the below exception "sun.jvm.hotspot.debugger.DebuggerException: sun.jvm.hotspot.debugger.DebuggerException: get_thread_regs failed for a lwp" in the console in the Linux ES and Redhat.
I set LD_ASSUME_KERNEL=2.4.1 to avoid occasional jvm crash problem I had previously. ( if I do not set this LS_ASSUME_KERNEL , I get proper Thread Dump)
After Taking Thread Dump my application ( server) is not responding and I can not kill the server using Ctrl - C or shutdown scripts.
The JAVA processes listed in 'ps -ef' is not listed for if I run 'jps'' this process is not getting killed even if I run ''kill -9 <PID>''
I have to restart the machine to run the server again or manually clean all the resources to run it again.
I do not have this problem if I do not set LD_ASSUME_KERNEL
Anybody has similar problem ? Anybody can help or give some information about where to look of solution/ root cause.
Thread Dump I got is :
Caused by: sun.jvm.hotspot.debugger.DebuggerException: get_thread_regs failed for a lwp
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal.getThreadIntegerRegisterSet0(Native Meth
od)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal.access$800(LinuxDebuggerLocal.java:34)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal$1GetThreadIntegerRegisterSetTask.doit(Li
nuxDebuggerLocal.java:431)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal$LinuxDebuggerLocalWorkerThread.run(Linux
DebuggerLocal.java:109)
sun.jvm.hotspot.debugger.DebuggerException: sun.jvm.hotspot.debugger.DebuggerException: get_thread_re
gs failed for a lwp
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal$LinuxDebuggerLocalWorkerThread.execute(L
inuxDebuggerLocal.java:134)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal.getThreadIntegerRegisterSet(LinuxDebugge
rLocal.java:437)
at sun.jvm.hotspot.debugger.linux.LinuxThread.getContext(LinuxThread.java:48)
at sun.jvm.hotspot.runtime.linux_x86.LinuxX86JavaThreadPDAccess.getCurrentFrameGuess(LinuxX86
JavaThreadPDAccess.java:75)
at sun.jvm.hotspot.runtime.JavaThread.getCurrentFrameGuess(JavaThread.java:252)
at sun.jvm.hotspot.runtime.JavaThread.getLastJavaVFrameDbg(JavaThread.java:211)
at sun.jvm.hotspot.tools.StackTrace.run(StackTrace.java:42)
at sun.jvm.hotspot.tools.JStack.run(JStack.java:41)
at sun.jvm.hotspot.tools.Tool.start(Tool.java:204)
at sun.jvm.hotspot.tools.JStack.main(JStack.java:58)
Thanks,
VASU

Did you try setting LD_ASSUME_KERNEL=2.4.1 in the shell where jstack is run ?

Similar Messages

URGENT HELP PLS : Issue with Multi Level Master Detail block

This is an issue someone else had posted in this forum few years back but there was no solution mentioned, I have run into this same issue , The problem is as explained below.
Any help on this is appreciated.
Scenario:
There are 3 Blocks in the form : A (Master Block)
: B (Detail of A )
: C (Detail of B )
There is master detail relation created between A and B and B and C. So initially when we query for a record in Master A, it shows all records properly in B and C.
Now if i navigate to the first record of B , and then second record of B , records corresponding to that record shows up properly in C block.
Till now everything works fine.
Issue 1:
But in case after querying initially on Master Block A,If I go directly to the second record of B block, it clears the whole B block and C block.
Issue 2:
Same thing happens if I am on C block ( corresponding to second record of B block) and then navigate to first record in B block , it again clears the whole B block and C block.
Please Help !!
Thanks !

Thanks Xem for Your reply , I tried those settings but it did not help..here is the original link that to the thread that talks about the same problem ,
Issue with Multi Level Master Detail block
The last update to this was the following :
"I figured out that this is happening because Block Status is set to 'Changed' and this is causing it to clear out the blocks.
But cant figure out why the status is setting to 'Changed' "
Any Help from the form Gurus on this form in this matter is truely appreicated !!
Thanks,
Zid.

HELP: SERIOUS ISSUES WITH BILLING

I have had serious issues with BT since joining their service. Without getting into the issues we had with the BT homehub and other things at the start of the contract with them here is what's been happening.
When we joined BT we explained that we wanted a monthly direct debit. Sounds simple enough but apparently not.
I have phoned over 6 times in the last year to change this. It has still not happened. Several times we were told that on the system it said monthly for it to be then taken out quarterly. In July while we were away this happened again. Only as we assumed that as they had informed us it would definitely be on monthly direct debit that it was the money for the whole of the quarter was not there. So when they took the money for a quarterly bill again. We were charged. It has set back other bills as the money had been eaten up by charges for this. As you can imagine we were quite annoyed. This was not our fault and we felt that BT were not capable of holding our account details without taking money they we repeatedly requested not to. I admit we should have kept a closer eye on our bills account but you don't think that a company will repeatedly do this to you.
After phone calls it emerged that they would not say more than a 'sorry' about this.
The saga then continued. I cancelled the quarterly direct debit at the back and have asked BT to send me monthly paper bills. Then last month our phone and internet was cut off.
We rang up and suggested that due to the mix up could they add the money we owed to our monthly bills and we'd pay this off on top of the monthly bill. Despite that the reason we owe this at all is not through any fault of our own but through theirs. The money would have been available had they taken it as repeatedly requested.
We were on the phone for 1hr and 10 mins ( 21st September) to three different people. No, they said must be paid in 10 day. My partner only managed to get money off this in about an hour - the point being we were happy to pay the whole amount over a year and were not allowed. We asked to speak to a manager after 1hr and 10 and were put back to the start of the queue. 16 minutes later the man we spoke to said a manager named Samantha would call us back. No-one did.
On the 22nd of september a rather annoyed me called back and repeatedly requested a manager - sadi would be put though. After 17 minutes the phone went dead.
Called later on same thing phone went dead after requesting a manager at 10 minutes.
Later on called for 28 minutes and told the call centre the issue £20 deducted from amount but said it had to be paid in ten days and a bill would be sent. Was told that the internet would be reconnected that day.
23rd September was hung up on after thre minutes on requesting why the internet had not been connected.
Phoned later. The man that I spoke to said that no action had been put through to reconnect the internet. He would do it and it would be through by 5pm.
My partner phoned at 8pm when the internet still had not been reconnected. It was done the next day.
Today BT phoned to ask if I had the bill ( Not sent) and tell me that the line will be disconnected by the end of the day. i explained that we were in the middle of complaints procedures with them. She looked on the system and said that there were no notes on the account. I asked for a manager and then asked for this managers superior. She put me through to someone that when questioned was not her superior and half way through my explanation of this....you guessed it..... the line went dead.
I am so annoyed that we've been fine with bill paying and as of their mistake we're now in debt to them and feel like we can't sort it out as there is not anyone who will listen or help. Has anyone had similar probelms or does anyone have a number for their English call centre?
Jess

hi Jess,
I am really sorry that you have had so much trouble trying to get this sorted out. I'll get this straightened out.
Could you drop me in an email please to the address in my profile with your BT account and telephone number along with a link back to this thread.
Cheers
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Need help troubleshooting issues with Adobe Reader X

Hello,
Recently our company upgraded multilpe computers to Reader X. Initially we installed version 10.1.0. Ever since our users on X have been experiencing problems. We are seeing three different issues.
1) A user will fill out the PDF and click print. At that point a popup appears with the message "Adobe Reader has encountered a problem and needs to close. We are sorry for the inconvenience." The user has the choice to click on Debug or Close. Clicking Debug doesn't appear to do anything.
2) Clicking on a PDF in internet explorer will launch Adobe Reader and a progress bar shows on the screen indicating that the PDF is loading. The progress bar goes away and the user is left looking at a grey screen.
3) When attempting to open a PDF the user recieves this message "The instruction at "0x00720065" referenced memory at "0x00720065" . The memory could not be "written."
In every situation the only way to get past the problems is a restart of the PC.
As an attempt to resolve the issue we tried upgrading several users to Reader version 10.1.3. This was done by completely uninstalling version 10.1.0 and then installing 10.1.3. This did not have any effect on the problems.
Can anyone here offer and suggestions?
Thank you

Hello,
1. The OS on which you are seeing these issues.
Windows XP SP3
2. The method of deployment of the 10.1.3 update. Was it done via SMS/GPO/SCUP?
Originally 10.1.0 was installed remotely using a program PSEXEC. Once the errors began occurring 10.1.0 was uninstalled manually and 10.1.3 was installed using a copy from your ftp site.
3. Can you try and update any one of your systems to the latest version of Reader i.e. Reader 10.1.4 and see if it solves the problem.
We have upgraded one machine to 10.1.4 using the Check for Updates function within Reader 10.1.3 and are looking for any ongoing issues.
4. Which browser are you using to render the PDFs. Is the issue seen with internal links alone or with all links. Can you try and see if the following opens on one of the faulty machine: http://kb2.adobe.com/cps/837/cpsid_83708/attachments/Acrobat_Reader_Re leaseNote_10.1.3.pdf<http://kb2.adobe.com/cps/837/cpsid_83708/attachments/Acrobat_Reader_ReleaseNote_10.1.3.pdf>
We are using IE 8. The issues are seen with both internal and external links as well as stand alone PDFs. No one could open the link you sent but we could open: http://helpx.adobe.com/content/dam/kb/en/837/cpsid_83708/attachments/Acrobat_Reader_Releas eNote_10.1.3.pdf on a faulty machine.
5. If suggestion# 3 doesn't work, can you also try and uninstall the installation on any one of the machines manually (i.e. via Control Panel > Add/Remove Programs or Programs and Features depending upon your OS) and install a fresh copy of Reader 10.1.3 (from ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.3/en_US/AdbeRdr1013 enUS.exe<ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.3/en_US/AdbeRdr1013_en_US.exe>) and see if it solves the problem. If it does, then it may be an issue with the Deployment methodology followed.
Already tried this. See answer to suggestion #2
Thanks,
Adam Behsmann
Application Support Analyst
Exchange Bank
(707) 541-1044

Please help! Issues with file permissions on the 'Edit' file created by LR for editing in Photoshop?

I am running a Macbook Pro with Mountain Lion. I use a Netgear ReadyNas as my storage device. I can Save, Re Save, Delete and add files without any concern on the ReadyNas from within PS or LR. However when I use the 'Edit in Photoshop" command on LR. I chose the 'Edit a copy with edits', LR creates the new duplicate 'edit' file in the same directory as the original. It opens in PS, I edit as required, however when I save the file to return to LR, I am informed that the file is locked and that I need to edit settings on file or folder, even though the settings are working for all other edits etc. I have had Netgear on this for 3 hours this evening and they cannot see any issues with the setting on the ReadyNas. Does anyone know what permissions are changed or why they are changing when the file is being created by LR?
Sorry bit of a long winded one - but I hope that all makes sense?

h264 is highly compressed and might be the reason your skimming isn't smooth, it may also take a bit more time to convert. I don't have to worry all that much about space so I haven't particularly tried it and can't say whether there are any drawbacks of doing so.
If you google 'mpegstreamclip tutorials', you will see quite a few tutorials you can look at, they do tend to be specific to one task which may not exactly fit in with what you are trying to do, but looking at a few might give you a better understanding of what some options do and when to use them if at all.

HELP: Mail issues with Leopard

I have been having an issue with Mail since I upgraded to Leopard. I am getting the following message when I wake my Mac from sleep:
There may be a problem with the mail server or network. Check the settings for account “[email protected]” or try again. The server error encountered was: The server “mail.mac.com” cannot be contacted on port 143.
Does anyone know why this might be happening? Mail seems to work fine otherwise...

I had update problems with my PowerBook G4 as well. In my case the update stalled at Writing Package Receipt-it was installing 4 packages so I am not sure which one failed-but about this Mac showed 10.5.2 version-however the receipts were not anywhere -either in Software Updates/Installed Updates or in Library/Receipts/boms or in Console Logs-therefore, I concluded that the Update was only partial. I was unable to update it to completion using the independently downloaded Combo updates. So........., I restarted with the install DVD and did an Archive and Install (it reverted back to 10.5), then ran Software Update. It installed 7 items some of them relating to iTunes, iWork, iLife, QuickTime etc, including the combo 10.5.2 updater. It took an hour or two but everything finally installed. After that I ran Software Update again and it installed the Graphic Update. Now everything is fine except Permissions Verify/Repair takes quite long.

Help! Issue with Adobe 8 and Microsoft 2007

Hello,
I'm hoping someone can help me. I recently installed Adobe 8 on a laptop running Microsoft 2007. When an email arrives with a word attachment, I double click on the attachment, click open, the word program opens rigth up but the document never appears. There is no error message, just no document. Previewing the document also works.
Excel attachments work fine. This issue just started happening after Adobe was installed this afternoon. Before that, we had no issues.
Does anyone have any ideas???
Any help/suggestions would be GREATLY appreciated!!!
Thanks!

That said, it's also incredibly boring and puts yet another arrow in the quiver for dual wield unholy (which is fast overtaking two-handed unholy for superior damage, thanks to Sudden Doom process and Runic Empowerment) by increasing spell-based damage instead of strike damage. I'd very much like to see this mastery switched out for something that specifically reinforces the two-handed play style, even if it's as simple as adding more physical damage to Scourge Strike based on high-end weapon damage. We have very available stock of [url=http://www.storeingame.com]RuneScape Gold[/url] on most of the servers and we can deliver your [url=http://www.rsfarming.com/]RuneScape Gold[/url] on the order in a short while. Want to have it? Select here, here all you want [url=http://www.gobuycheaprsgold.com]Cheap RS Gold[/url] beyond imagination, come [url=http://www.zyy.com]Buy WOW Gold[/url] for providing to you.

Please help - performance issues with Lr 2.3

I really hope some user/s or Adobe support members could help me with tweaks/suggestions to improve Lightroom 2.3's sluggish performance on my computer.
First of all I have read about 100 different forum topics this morning, have used the forum search extensively and I cannot find any one topic which talks about different methods for improving performance. So I really have tried to find the answer before asking for help and I have done a lot of googling to try and find some simple answers but after all this reading I am more confused than when I started out.
Let me first explain what I am experiencing and I will try and be as detailed as possible.
1 - When I browse the library it is incredibly slow rendering the thumbnail previews. I found a topic which talked about degfragging the LR catalog using sqlite and contig, I did that and it made no difference to performance.
2 - I left my machine running an entire day to render the 1:1 previews thinking this would help me with the slow thumbnail issues but it made no difference. It is however faster now when I double click and image and get the immediate 1:1 preview :)
3 - I have turned off the Automatically write changes into XMP, suggested on another topic, that made no noticeable differences to performance either.
4 - A few months ago when I was still running 2.1 I found a topic either here or on Google that told me to delete the entire previews folders and let LR recreate them from scratch, I did that back then and that did not make any difference either, turned out to be 24 hours of waste time for me.
5 - I tried changing the following settings under catalog settings (has not improved anything):
size: 2048 Pixels
quality: High
automatically discard 1:1 previews: Never
6 - The only slow performance I am experiencing in LR is the thumbnails and this slows down my workflow dramatically. Everything else in LR seems to be quite fluid and usable and fast. I notice many users have complained about the slow thumbnails issues and I was praying that 2.3 was going to sort this out.
7 - I have also noticed that when scrolling up and down the thumnail list it sometimes uses more than 1 processing core and then sometimes not and then when I stop scrolling up and down the thumbnails and leave it alone for 5 seconds suddenly all 8 processing cores spike to around 50% usage with processing "something".
8 - I have tried making my thumbnail previews different sizes, also makes no difference really, unless I go to the smallest size and then it seems ok but then it's hard to see what's going on at all with thumbnails that small.
9 - Lightroom is only using up 1.1 GB of available memory so I do no think the slowness relates to memory and I am running my memory in a proper DDR3 configuration.
10 - I have tried playing with my graphics card settings (below) but it does not seem to help no matter what I try.
11 - Overall it "seems" that Lightroom is trying to re-render thumbnails continously, I know technically this may not be true but as an end user this is how it feels to me.
My computer specifications are as follows:
Intel i7 965 Extreme Edition (not overclocked)
Intel DX58 Smackover Motherboard
6GB DDR3 Ram (not overclocked)
GEForce 9800GT Video Card (with WHQL driver)
SATA 2 1TB Seagate Drives
Windows Vista X64 (SP1)
Lightroom 2.3 X64
NEC 30" Display running at 2560x1600 resolution
The way I have LR configured on my PC is as follows:
- Program files installed on main C drive which is a 250GB partition on a 1TB Seagate Sata 2 drive with 190 GB Free space all the time.
- Lightroom catalog is on my E drive which is a 1TB Seagate Sata 2 drive
- Camera Raw Cache is set at 10GB and resides on the same E drive as the LR catalog
- My E drive has 100GB Free Space
- I have tried tweaks to the video card settings to be Lightroom spe

Hi Don
Thanks for the reply, I have tried changing any/all settings on the card set to performance versus quality and still it has no effect. I just got the latest video driver for the GT9800 which was released on the 3rd of March and that has no effect either. I tried loading the 32 bit version of Lightroom without any improvement to speed on the thumbnails whatsoever so that rules out the possibility of it being something to do with 64-bit.
I read an Adobe knowledgebase article saying that the Nvidia control panel conflicts with certain Adobe software but they do not say how to turn it off and I also cannot even find the answer to that on Nvidia's forums either. So I still cannot say whether or not the Nvidia control panel is the problem because I cannot disable it.
I phoned a friend this morning who is running Lightroom 2.3 on a simple Core-2 Duo machine and his thumbnails render in half the time that mine do and my hardware is top of the range stuff in comparison so you can imagine my frustration with this thumbnailing issue. My friend also has an Nvidia card 8800GT I think.
I have spent so much time on this and I am no further to a solution and this blurry thumbnail issue is seriously messing with my eyes and it does not make for a very pleasant user experience.
What concerns me is that while Lightroom is idle and the machine is idle Lightroom is not doing anything in the background like rendering thumbnails. It only starts rendering them once I scroll down a page, no doubt by design but for more powerful machines there is a lot of processing ability going unused. The thumbnails on the filmstrip render a lot faster compared to grid view but their rendering state is also not retained and once I have scrolled past 100 images and then scroll back they are all blurry again and I have to wait for them re-render all over again. All this re-rendering of thumbs is a really big waste of time.
I also noticed something else interesting this morning, I opened task manager and left it open while I was scrolling thumbnails (continuous scrolling without waiting for them to render sharp) and only one core was being used to do this processing, I tested this multiple times and left it open while I scrolled through 5000+ images and only one core the whole time was being used. Only once I stopped scrolling and Lightroom began it's rendering of the thumbnails (about 10-15 seconds after stopping scrolling) did it only then start using multiple processors, I'm not sure if that has something to do with anything and memory wise I have 4.2 GB of available memory and Lightroom is only using about 425 Mb of memory.
I have changed the size of my thumbnails to below halfway on the slider and that made only a slight difference, although now they are so small on this 30" screen that I am now suffering even more eye strain as a result.
I am busy loading LR 1.x to confirm whether any of these behaviours existed back then and will report back.

Pl help - Screenshots issue with Adobe Reader 9

Please help me I am really stuck bad with the screenshot issue
We use WORD 2007 to make our User guides, these are converted to PDF. When we view the PDFs in Adobe Reader 9.2, screens are coming very hazy and blurred.
If I open the same PDF in Nitro PDF, or Acrobat Professional, the screens look much much better.
I've attached the screenshot, word file and pdf file for refrence

Thanks Bernd, I set 'Smooth Text' as NONE but still no luck
Can you please specify which settings are you referring to.
Thanks

I need help resolving issues with inbound mail on 10.8.5 server.

Let's start from the beginning.
I had a Mac Mini server running OS X 10.7 since 2011. I have a static IP and domain registered. I used it for mail, calendar, and web service. It was working beautifully until a week ago. Suddenly it stopped processing mail for me from google and apple managed domains. There may be other domains, I do not know.
I checked my external firewall and the correct ports are being forwarded (25, 587, 993). Connected to a remote network, I can verify that nmap shows the ports as open. I can telnet into the server on port 25 and send mail. I checked with the ISP and they are not blocking/filtering those ports and the DNS they are hosting for me appears to be correct (unchanged from when it was working). I've looked in the logs, but I'm not sure what I'm looking for, really. I upgraded to 10.8.5 and server 2.2.2 last night in an attempt to rectify the situation but I'm still unable to receive mail from my other accounts (iCloud and gmail).
I've been trying to troubleshoot this issue for a while now and I'm all out of ideas. If anyone has any advice I'd really appreciate it.
Thanks,
Trevor

Hi,
I can send/receive mail locally. I send mail to [email protected] from [email protected] and [email protected]. This works while on my LAN and connected to my work via VPN.
I'm not listed on any blacklist, either by domain or IP using that tool. The MX lookup tool at that site lists everything as OK, the MX record appears to be correct. The SMTP test at that site shows a "failed to connect" error. The exact error is:
Connection attempt #1 - Unable to connect after 15 seconds. [15.04 sec]
I'm not sure what I'm looking for in my log files. I do not see any inbound connection attempts from google or apple domains when I try to send from my other e-mail accounts.
when I run the dig command, I get the following output:
dig @8.8.8.8 -t mx bakernet.ca
; <<>> DiG 9.8.5-P1 <<>> @8.8.8.8 -t mx bakernet.ca
; (1 server found)
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 1983
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;bakernet.ca. IN MX
;; ANSWER SECTION:
bakernet.ca. 3599 IN MX 10 mail.bakernet.ca.
;; Query time: 100 msec
;; SERVER: 8.8.8.8#53(8.8.8.8)
;; WHEN: Sat Jun 21 07:47:08 EDT 2014
;; MSG SIZE rcvd: 50
I don't see an A record here. My DNS is hosted by my ISP, my server is performing DNS lookups for my LAN.
When I run dig from inside my LAN I get the following:
; <<>> DiG 9.8.5-P1 <<>> -t mx bakernet.ca
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 21448
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 2
;; QUESTION SECTION:
;bakernet.ca. IN MX
;; ANSWER SECTION:
bakernet.ca. 10800 IN MX 10 mail.bakernet.ca.
;; AUTHORITY SECTION:
bakernet.ca. 10800 IN NS www.bakernet.ca.
;; ADDITIONAL SECTION:
mail.bakernet.ca. 10800 IN A 172.16.0.17
www.bakernet.ca. 10800 IN A 172.16.0.17
;; Query time: 0 msec
;; SERVER: 127.0.0.1#53(127.0.0.1)
;; WHEN: Sat Jun 21 08:02:04 EDT 2014
;; MSG SIZE rcvd: 100
That does show an A record for the mail.bakernet.ca hostname. Looks like my ISP is to blame?
Trevor

Re: HELP: SERIOUS ISSUES WITH BILLING

i have phoned up a few times since having BT about my first bill i phoned up on monday as they tried to take my bill which i had already paid over the automated service and when i spoke to someone they said the bill had been paid so would like to know why i still owe £72.54

Welcome to the forum. Billing Live Chat should be able to help, and you can keep a copy of the transcript just in case. If that doesn't resolve it please post back here with some more detail (but no personal info such as account number).
You can click the white star next to this message if you think it was helpful.

HELP: Sync Issues with External Hard Drive

Since I have moved all my music to an external hard drive I am having issues syncing. My Next Gen Ipod syncs, but never gets rid of the syncing notification. I have to disconnect it and restart it. Also, when it syncs it leaves two copies of the songs on my library, one copy has the explanation mark on it. Can anyone help me stop this?

R00KIE wrote:
I'd say bad power supply (if it has an external power supply).
Two external enclosures have done that to me already (but one is almost certain to do it while the other just started to do it recently), if the HD I have in the enclosure is a bit older (and noisier) I can even hear the HD spin down a little and spin up again, of course that whatever I was doing explodes in the process.
Mind you that the HD is confirmed to be working properly by connecting it inside a desktop pc.
I have couple other power adapters I can try. I got the same enclosure for my dad. I have a brick for a LaCie drive too. (I bought the lacie drive a year ago, but the power supply buzzed loudly. I put in a support request, but ended up returning the drive, and they sent me a new power after that)

Help! Issues with apple ID

Ugh. This is frustrating. So I made an apple id for my iPad a few years ago and have forgotten the password. Now that I've made a new account and want to replace my old one with it, I'm trying to sign out of the old acct's iCloud but that requires the old password. So I go onto iforgot.apple.com and use email authentication. The email doesn't send for some reason, no matter how many times I've tried. I've checked every folder and it's not there. What do I do?! I can't use iCloud without knowing my password

Try here:
Apple Support contact info on Apple ID password and other security-related issues
http://support.apple.com/en-us/HT201363
Note: Content bought using one Apple ID cannot be merged or transferred to another Apple ID.

HELP PLEASE ISSUES WITH ICLOUD

Ok, so i took my iphone 4s to the apple store and spoke to icloud support over the phone and neither of them could help me...all they did was tell me things ive already tried....i backed up my iphone to icloud and then restored it due to some glitchiness...however, it restored everything from my icloud backup except for my photos and its clearly something wrong with my icloud account but NO ONE can seem to fix my account...can someone please help , I'm so desperate....

Set the iTunes login and password and the e-mail addresses on the iPad iCloud setup to the same as the owner of the Family Sharing and iCloud account, which in this case is you.

Help Me: Issue with "Unable to Sign In" Analytics Of OBIEE 11g

Hi Friends,
I have Installed OBIEE 11g in Windows Server 2008-64 bit.I have installed through "Software Only" and ran the "Config Script".
while I was running "Config Script" , One Component was failed i.e "Executing : opmnctl start coreapplication_obips1 -----> Failed".
I just ignored that one and continue the installation.All were successfully created expect that "obips1".
Used Requirements for OBIEE11g:
Oracle 11.2.0,jdk-6u24-windows-x64,wls1033_generic,ofm_rcu_win32_11.1.1.3.3_disk1_1of1(RCU),OBIEE 11g 11.1.1.3.0.
All servers are up(NodeManager,WebLogic,BIServices,opmnctl) and the status of "opmnctl" also shows are are "Alive".
But here the problem is I am unable to login "Analytics" and even I am able to login "Console" and "EM".
I am getting an Error while I was logging to the Analytics i.e "An error occurred during authentication. Try again later or contact your system administrator".
can any one help out how to fix the problem to Login Analytics successfully .
and suggest me that need to add any patches or other ways to fix the problem.
Please help me out. Thank you
Regards,
Chiranjeevi.

Can you check to see if you are able to login to Admin tool using the sampleliteapp Repository? Try the below solutions. If your not able to login to Admintool also, then solution 2 is more likely to fix the problem
Solution 1: (Restart BI services )
Try to restart all the BI Services.
1. Go to EM
2. Click on Business Intelligence to expand it
3. Click on Coreapplication, then Capacity Management tab
4. Click Restart All
5. Once all the compnents are restarted, the logon is enabled using the new port number being set.
Solution 2: ( Refreshing GUID's)
Open the NQSConfig.INI file for editing. For more information, see "Where are Configuration Files Located?" in Oracle Fusion Middleware System Administrator's Guide for Oracle Business Intelligence Enterprise Edition.
Locate the setting FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = NO and change its value to YES.
Modify the instanceconfig.xml file to instruct Oracle BI Presentation Server to refresh GUIDs on restart. Edit the file to add the last line in the following instruction.
<ps:Catalog xmlns:ps="oracle.bi.presentation.services/config/v1.1">
<ps:UpgradeAndExit>false</ps:UpgradeAndExit>
<ps:UpdateAccountGUIDs>UpdateAndExit<ps:UpdateAccountGUIDs>
From a terminal window, stop and restart the managed processes using the opmnctl parameters stopall and startall. You can use the parameter status to verify process status throughout.
The following components are involved: Oracle BI Presentation Server, Oracle BI Server, Oracle BI Scheduler, Oracle BI Cluster Controller, and Oracle BI JavaHost.
For information about using opmnctl commands, see "Using the OPMN command line to Start and Stop Oracle Business Intelligence System Components" in Oracle Fusion Middleware System Administrator's Guide for Oracle Business Intelligence Enterprise Edition.
Edit the NQSConfig.INI file to reset the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = YES to NO and restart the Oracle BI Servers.
Remove, set to none, or comment out the line (see UpgradeAndExit in the following example) added to the instanceconfig.xml file (that instructs Oracle BI Presentation Server to refresh GUIDs on restart).
<ps:Catalog xmlns:ps="oracle.bi.presentation.services/config/v1.1">
<ps:UpgradeAndExit>false</ps:UpgradeAndExit>
<ps:UpdateAccountGUIDs>none<ps:UpdateAccountGUIDs>
Restart the Presentation Server for the instanceconfig.xml file that was updated.
Make sure Oracle WebLogic Server and the system components are also running, if they are not running, restart them.
For more information, see "Starting and Stopping the Oracle Business Intelligence Components" in Oracle Fusion Middleware System Administrator's Guide for Oracle Business Intelligence Enterprise Edition.
Let me know if that worked for you.
Thanks
-Amith.

Help - ThreadDump issue with jstack PID

Similar Messages

Maybe you are looking for