Help to configure Audigy2ZS Platinum Pro and Cubase SX2

Can anyone tell me how to set my Platinum Pro card with Cubase SX2...I'm also having Latency problems recording in 24bit-96hrtz...Should I buy a mixer or is The Audigy breakout box good enough...many questions I know...I hope ye can help me,,,,

pedrozepelim197 wrote:
What's the best possible configuration for a Audigy Platinum and Sonar? (bit depth, samplig rate, etc.)
Driver mode:
ASIO: (there are not many choices available )resolution: 16-bit
SR: 48kHz
latency: on recording ~4-10 ms, on mixing 20-100ms (depending on plugins you have in use)
WDM/KS (or Asio4All):
resolution: 24-bit
SR: 48 kHz or 96 kHz
latency: Sonar sets it to 10 ms (you can set it bit lower with Asio4All), you can increase it when mixing
ASIO gives you couple of more inputs for (simultaenous) recording vs WDM/KS (or Asio4All).
You get more information/'support' from
Cakewalk -forums
jutapa

Similar Messages

Audigy 2 ZS Platinum Pro and XP

I have Audigy 2 ZS Platinum Pro and Logitech Z-5300 5. Speakers. When using XP SP, everything worked perfectly, then I upgraded to SP2. It has been a complete multimedia nightmare.
When using the diagnostic tools, each speaker works perfectly except will always have a faded voice to the point where I cannot hear the voice but I can hear something was attempting.
WinAMP or Media player or any other MP3 player to include tools coming with creative labs products, I get music only out of a single (Center) speaker. The rest lay silent. I upgraded my sound card drivers using Creative Lab's website. Any ideas how to get my system back to normal sound quality, as of this moment I am thinking creative lab's products do not work correctly under SP2.
Any help would be appreceated and for the money spent on the card, I kind of expect creative to have a solution.

Roaming,
Try cleansweeping and reinstalling the sound card. Sometimes after a major update (like a service pack) some hardware or software needs to be reinstalled. Here is a link to the article that describes how to cleansweep your card.
http://us.creative.com/support/kb/ar...asp?l=2&sid=72
Jeremy

Audigy 2 ZS platinum pro and msvcrt.

scard: Audigy 2 ZS Platinum Pro
OS: Windows XP SP3
msvcrt.dll: 7.0.2600.552 located only in windows\system32 and windows\ServicePackFiles\i386
I tried to update the driver. (Full uninstall of the previous one as per the FAQ plus some cleaning tools like Driver Sweeper, Driver Cleaner, regcleaners etc) I started getting MANY msgs about "different".exe - ENTRY POINT NOT FOUND "The procedure entry point _mbsnbcpy_s could not be located in dynamic link library msvcrt.dll" (the"different".exe contains eg. CTRegSvr.EXE among others).
After restart the driver works but I don't have access to any Creative tools like the mixer for example. It's just the sound working. Nothing else.
I uninstalled everything again. After the previously described cleaning proccess I tried to reinstall the old driver from the installation CD. Same thing. Many errors during the installation proccess about "ENTRY POINT NOT FOUND on msvcrt.dll".
Any Ideas?
I appreciate the help
Pan

Problem solved.
Uninstall/Reinstall SP3 did the job
Pan

Audigy 2 ZS Platinum Pro and Vista 64

I just built a new computer system?and am trying to get my Audigy 2 ZS Platinum Pro to work in my new system. I am running 64 bit Vista?on an ASUS P5E-V HDMI motherboard with 4 GHz of memory and an intel Quad Core Processor. I have downloaded the Vista drivers, but I cannot get everything to work properly. My THX console, speaker setting console and others will no longer work. I am getting sound only through the front left and front right speakers. My subwoofer, center channel and right rear and left rear spekaers will not work. I have confirmed that analog 5. has been selected and that digital is not checked. I am at a loss as to what to do next. I have Logitech THX Z-5300e 5. speaker system. Please help!

Is there no one out there that can help?

Audigy 2 ZS Platinum Pro and Inspire T7700 does not recognize Mic on Audio Control

Hi folks,
I decided to hook up my headphone and mic sets to the Audio Control Pod for the first time recently to chat online. I'm not sure if I ever tried this when I bought the Inspire T7700 speaker system, but I cannot seem to get any voice to come through in Windows' Sound Recorder (the headphones work fine). I'm hoping that someone here can help...otherwise, I suppose I'll have to find an alternate solution than using my soundcard system.
Here are some specs:
OS: Windows XP SP2 and all current updates
Soundcard: Audigy 2 ZS Platinum Pro
Speakers: Inspire T7700 with Audio Control Pod (contains the headphone and mic jack)
Here's what I have tried:
. Updated drivers to: SBAX_WBUP2_LB_2_09_006.exe
2. Tested headsets and mics out on another one of my computers with a SoundBlaster Li've. They work fine.
3. Set each audio source with full volume in the Recording Control window as the source while recording in Windows' Sound Recorder (I know some of these aren't right, but I tried them all nonetheless):
- MIDI Synth
- Line-In 3
- Line-In /Mic (this should be the one, I think)
- S/PDIF-In
- Auxiliary (this might be the one for the Audio Control Pod)
- "What U Hear"
- Line-In 2
- CD Digital
- Wave
4. Installed the Creative software from the official CD to manage the audio and speaker settings. Retested the same as item 3 above within this software. Same results.
5. Disconnected the external I/O hub (since I am connecting to the Audio Control Pod, which connects to the speaker system and then my sound card). Interestingly, the Line-In /Mic input disappeared. All that I saw for an input (I believe) was Auxiliary. I tried even that as noted in item 3, but nothing.
Has anyone had any luck in getting a mic from a headphone set to work with the Audio Control Pod for the Inspire T7700 speaker system along with the Audigy 2 ZS Platinum Pro?
Thanks in advance for the help!

Read the FAQ on top of the soundcard forum concerning SPDIF and digital out. The reason is very easy to find out if you read that. In short: the digital out can only send out a PCM stereo signal (which is why you only get FL/FR sound) and an encoded AC-3 signal.

Problems with SB Audigy 2 ZS Platinum Pro and autoexec.nt and running games. HE

Hey, this is my first post here so Hello all!
Just wondering if anyone can help me.
Ever since i've installed my SB Audigy 2 zs platinum pro soundcard the following error has occurred whenever I attempt to play a dos-based game:
<location of game file>
c:\WINDOWS\System32\autoexec.nt. The system file is not suitable for running MS-DOS and Microsoft Windows applications.
I've looked for solutions but I've only found things relating to old old soundblaster cards etc and not an audigy 2. One solution was to copy the autoexec.nt file from the windows\repair folder into the system32 folder. It tried it and yes it worked for the games, but I then had no soundcard and had to move the file back, uninstall and reinstall my audigy 2 all over again. The games still bring up this error. The error also occurred when I tried running Band in a Box .
So I'm really stuck.
Thanks for any help.

In that case, have you try updating the latest BIOS, chipset driver, USB driver(if any) from your mainboard website.
Jason

Audigy 2 ZS Platinum Pro and Gigaworks speakers

Greetings All. I was just wondering how the card and speakers connect. Does the optical on the breakout box get used or do you use the plugs on the actual card?
Also
What functions and imputs etc. does the gigaworks speakers have? Do they have an optical imput etc? A basic description would be very much appreciated. Thanks in advance!!

Cafuddled wrote:
I have just reinstalled my OS and have updated everything but have noticed the drivers off the website don?t give me the THX Console and a lot of other things that it did have with the drivers off the disc.
I have lost the install disc that came with the card so now I need to find some other way to get all the programs. I have tried the THX Console update file but that just spits out an error saying cannot find relati've components.
So does anyone know where I can get this program or anything that will do it'ss job because I really need to configure my 7. system as you can notice the difference when 7. is not properly configured in movies and games.
Specs:
Audigy 2 ZS Platinum Pro + 7. Gigaworks speakers
Windows XP SP2
http://badboy.filefront.com/
jutapa

Need help - Print Menue in Acrobat Pro and Standard

Hello,
at first, i have to apologize for my bad englisch because I'm german.
I downloaded a Trial of Acrobat pro and there I hava an extended Print menue where I can choose individual Color Profiles.
There is an image attached.
But I don't really need the Acobat pro Features, because I need Acrobat only for Color Printing on my Printer. And it ist expensive.
So my Question to you is: Is this extended Print menue also in Acobat 9 Standard?
There is no Trial, so that I hope, that someone can help me.
Can I also set this settings in Acrobat 9 Standard?
Thank you very much for helping me with my buying decision.
Greetings from Munich
Sebastian

The Advanced Print menu in 9 Standard does not have all of the options that are in your screen shot.
Checked with a coworker who has 9 Standard, and the options are much more limited. (I have 8 Pro).
Bad news is you would need 9 Pro.
Saw this the other day; sorry for the slow answer, good luck.

Audigy 2 ZS Platinum Pro and ASUS P5W DH Deluxe Motherbo

I am currently trying to get my soundblaster Audigy 2 Platinum Pro to work with this board. I have dis-abled the onboard sound but still no luck. Has anyone managed to get this to work? I am currently using the so called Hi quality onboard sound but it's nowhere near as good as my dedicated card. Any help would be appreciated.
Thank you...Rob

Is there no one out there that can help?

Audigy 2 zs platinum pro and my

i have a Creative Labs Audigy 2 Zs Platinum pro (the one with the external box).
How do i go about getting sound coming from the PS2 to go through my sound card, and out the speakers. Im trying to use the optical output from the ps2, to the optical input on the external box from my sound card.
Where is the setting to make this happen...i've read over some of the post regarding this on here...but still really confused
Thanks

Anybody?

Help needed - what are the Pros and Cons?

Hi Swing masters! :)
I was told that I should post this Q here and that Camickr and a few other might have some more specific answers.
I'm new to Java and programming and trying to establish some good habits from the beginning. Therefore I'm very interested in knowing the Pros and Cons for each end every of the following approaches.
What is good, what is bad, should some of them be avoided etc?
I hope someone with Swing experience can answer these questions. Thanks. :)
Kind regards,
Stefan
class ExperimentGUI
    void ExperimentGUI() // Example A
        JFrame content = new JFrame();
        JTextArea textView = new JTextArea();
        textView.setPreferredSize(new Dimension(300,300));
        content.add(textView, BorderLayout.CENTER);
        content.pack();
        content.setLocationRelativeTo(null);
        content.setVisible(true);
class ExperimentGUI extends JFrame
    void ExperimentGUI() // Example B
        JTextArea textView = new JTextArea();
        textView.setPreferredSize(new Dimension(300,300));
        add(textView, BorderLayout.CENTER);
        pack();
        setLocationRelativeTo(null);
        setVisible(true);
class ExperimentGUI
    ExperimentGUI() // Example C
        JFrame content = new JFrame();
        JPanel pane = new JPanel(new BorderLayout());
        JTextArea textView = new JTextArea();
        textView.setPreferredSize(new Dimension(300,300));
        pane.add(textView, BorderLayout.CENTER);
        content.setContentPane(pane);
        content.pack();
        content.setLocationRelativeTo(null);
        content.setVisible(true);
class ExperimentGUI extends JFrame
    ExperimentGUI() // Example D
        JPanel content = new JPanel(new BorderLayout());
        JTextArea textView = new JTextArea();
        textView.setPreferredSize(new Dimension(300,300));
        content.add(textView, BorderLayout.CENTER);
        setContentPane(content);
        pack();
        setLocationRelativeTo(null);
        setVisible(true);
class ExperimentGUI extends JFrame
    ExperimentGUI() // Example E
        MyPanel pane = new MyPanel();
        setContentPane(pane);
        pack();
        setLocationRelativeTo(null);
        setVisible(true);
class MyPanel extends JPanel
     public MyPanel() {
        setLayout(new BorderLayout());
        JTextArea textView = new JTextArea();
        textView.setPreferredSize(new Dimension(300,300));
        add(textView, BorderLayout.CENTER);
class ExperimentGUI extends JFrame
    ExperimentGUI() // Example F
        MyPanel pane = new MyPanel();
        add(pane);
        pack();
        setLocationRelativeTo(null);
        setVisible(true);
class MyPanel extends JPanel
     public MyPanel() {
        setLayout(new BorderLayout());
        JTextArea textView = new JTextArea();
        textView.setPreferredSize(new Dimension(300,300));
        add(textView, BorderLayout.CENTER);
}

Well, in most of the examples I've seen on the net people use "...extends JFrame"Well, I'm probably one of the bigest offenders (in this forum at least)
google "composition vs inheritance", you'll most likely find some good reads Not know the difference between the two (I'm a problem solver, not a designer), I figured I should take up the challenge.
So one of the first links I read said:
Object composition and inheritance are two techniques for reusing functionality in object-oriented systems
So I'm thinking how do you reuse a JFrame? Maybe if you build the frame with a menu bar or toolbar you could reuse some of the components but you don't reuse the entire frame. So it seems to me that the reuse aspect of inheritance or composition doesn't apply.
Next link I read said:
Make sure inheritance models the is-a relationship
Now this makes sense to me. Lets say I'm creating a MineSweeper Game. Lets create a class with the following signature:
public class MineSweeper extends JFrameThis obviously does not follow the is-a relationship rule. MineSweeper is-a Game, not a JFrame.
So, I guess I'll have to update all my examples to use composition, so I don't mislead others on the forum.

Need help creating movies in Snapz Pro and then editing them in FCE

I'm in the process of creating a series of training videos on a software application that will ultimatley be on a DVD accompanying a book. I'm trying to use SnapZ Pro to capture the video (with audio) and then edit the sound in FCE. I have no clue what settings to use in Snap Z Pro for the best quality and that will be compatible with FCE. I tried a few samples and used the Animation codec (and various audio compressions). The audio tract was fine in FCE when I listened to it alone, but jumpy with lost segments when combined with the video. I'd appreciate some ideas of what settings to use at every step of the process for best results.
When I tried saving a segment using the Apple Intermediate codec in Snapz Pro, FCE repeatedly crashed when importing the file.
Any help would be greatly appreciated!
Thanks!

FCE is a fixed resolution video editing application. It will only work in DV or HDV. 10fps is not a frame rate used by either of those. The material needs to be in a standard frame resolution and frame rate. The standard for DV is 720x480 at 29.97fps. If you capture at 10fps you're going to have to save the material using the DV NSTC codec, set the frame size to 720x480 and the frame rate to 29.97. You may have pixel aspect ratio issues requiring capture at 720x540, but I don't know enough about SnapzPro to know how that product handles frame resolution and frame rate conversion.

Audigy 2 ZS Plat Pro and Cubase AI 4 issues

+? Hello everyone!
Just wondered if anyone had come across this before?
I'm just setting up a project in Cubase AI 4 that came with my Yamaha MM6. I've selected Creative ASIO driver, direct monitoring, release into background etc...and I've set up the inputs and outputs (Line In 3 plus Mic).
When I play the keyboard, I'm seeing the audio registering on the mixer in Cubase, but no sound is coming through my speakers. I've checked that the Creative mixer Line In 3 wasnt muted and tested the speakers, but still nothing.
However...if the Creative Mixer is open and I maximise it while I'm using Cubase, I can suddenly hear my keyboard..!.*?
Erm...does anyone know what I'm doing wrong? I have to say that the Creative mixer has always caused me a headache when recording, but that might just be because I'm missing something....
Cheers
Kat

already asked and discussed in the last 3 days.
http://forums.creative.com/creativel....id=79342#M940
next time do a search before posting in a new thread, it helps keeping lisibility and finding quicky users with the same interest.

Help, I have a macbook pro and I need to re-load the OS,   But...

I don't have any disks for it. Its a 4 yr old laptop ('08 mbp, 2.4). I put a new HD in (old one went bad) and I need to load the OS on it.
Problem is I have no disks to do so.   I have another mac.   Is there any way I can connect it to my other one and download the OS or anything? I have a 13" mbp with the disks, but I probably cant load the OS from those can I?
I have snow leopard disk I bought when I had leopard, and also have upgraded to Lion.    But don't i need an actual disk to load a basic/main OS to upgrade to snow leopard then to lion?
Does the apple store do this?   Or do I have to find a generic leopard disk and load it from there?
Please, any help would be greatly appreciated.

You may be able to load the OS from your other MBP disks, if they are the same modal MBP...
You could also do a clone of your other MBP to the blank one, use Carbon Copy Coner and a FireWire cable.

Connect Logic Pro and Cubase on PC?

Hi Guys
I want to connect my Macbook PRo using Logic 8 as the Seq to use the patch/sound/library/samlples/VSTi from my Cubase 3 on another PC, any way to do this? Thanks!

Apologies for the hijacking, but does anybody know if a similar thing is possible if instead of the program running on a separate PC it is a virtual one running on the mac (i.e. using parallels or fusion)?

Help to configure Audigy2ZS Platinum Pro and Cubase SX2

Similar Messages

Maybe you are looking for