Help to connect Microoft Remote Dextop (win7) with Iphone 5 using RD client

Help to connect Microoft Remote Dextop (win7) with Iphone 5 using RD client Hello, I can connect my iphone 5 to my laptop(windows7 OS) with RD client while My iphone is also connected with my laptop's wifi hotspot. And i can remotely control my laptop with the iphone nicely while I am in the laptop's wifi range. Is it possible to control my laptop from iphone while my phone is not connected  to laptop's wifi hotspot???? I use 3G internet in my phone while I go out of home.

I have no issue using cellular data when I remote in from my iphone with the RD client.
Have you tried using cellular data to remote in?

Similar Messages

  • Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentV

    I installed Exchange Server 2010 inside my VMWare Windows Server 2008 Ent R2. And After successful installation  when I try to open my Exchange Server Console, I am getting the following error message. I am very new to Exchange server please help me
    to solve this problem.
    Initialization Failed
    The following error occurred while searching for the on-premises Exchange server:
    [win-.local] Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError
    $true -CurrentVersion 'Version 14.1 (Build 218.15)''.
    Thanks Vivek
    SharePoint Foundation 2010 Book
    http://www.redpipit.com

    Hi,
    Please have a look at the article below:
    Troubleshooting Exchange 2010 Management Tools startup issues
    http://blogs.technet.com/b/exchange/archive/2010/02/04/3409289.aspx
    Resolving WinRM errors and Exchange 2010 Management tools startup failures
    http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx
    Besides, please run the cmdlet below:
     set-user alias -remotepowershellenabled$true
    Xiu Zhang
    TechNet Community Support

  • SFTP receiver error: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE

    Hi,
    When we try to send file over seeburger SFTP (receiver) we are getting the error as below.
    Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: >> Description: SFTP transaction error occured.>> Details: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true, >> Description: SFTP transaction error occured.>> Details: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true
    But we are able to connect through filezilla . we are able to create and delete file using the same username and password which is being used in SFTP adapter.
    we have imported the both dsa and rsa keys in SFTP partner folder in NWA. Even though we are getting same error.
    Thanks,
    Vinayak

    Hi Ram,
    we checked with network team and port 22 is open and they are able to ping to the target system.
    we checked the seeburger logs and we see EOF received from remote site error:
    Caused by: com.maverick.ssh.SshException: EOF received from remote side [Unknown cause]
    #at com.maverick.ssh2.TransportProtocol.b(Unknown Source)
    #at com.maverick.ssh2.TransportProtocol.i(Unknown Source)
    #at com.maverick.ssh2.TransportProtocol.nextMessage(Unknown Source)
    #at com.maverick.ssh.message.SshMessageRouter.d(Unknown Source)
    #at com.maverick.ssh.message.SshMessageRouter.access$000(Unknown Source)
    #at com.maverick.ssh.message.SshMessageRouter$_b.run(Unknown Source) 
    Thanks,
    Vinayak.

  • I cannot connect my I pad mini and iPhone using Bluetooth.

    I cannot connect my I pad mini and iPhone using Bluetooth.

    I'm not sure what made you think that that was not what Regal trail was asking... I am having the same problem and wish that that question had been answered! I believe I've gone through the same steps that used to work, to no avail now. But I'm betting that you (Chris) have the answer to this!
    In a nutshell: I'm trying to share my iPhone's cellular connection with my WiFi-only iPad Mini, using a Bluetooth connection. I used to do this regularly, but went for a period of time without the need for it, and so am hard pressed now to identify which thing that might have changed during the interim would have made it no longer work.
    iPhone is connected to internet via cellular data (AT&T LTE). Bluetooth is on. Personal Hotspot is on.
    On iPad, Bluetooth is on. My iPhone shows up in the list under My Devices, and I can select it, and it will connect for approximately 5 seconds. The shared connection icon shows up on the iPad. The iPhone (on the Bluetooth screen) shows, for those 5 seconds, that the iPad is connected, but the shared connection status bar never shows up on the iPhone.
    After 5 seconds, it disconnects.
    Thoughts? Need more info? Let me know! Thanks.

  • Error in Application.Run(DisplayLoginForm) and Remote Authentication in SharePoint Online Using the Client Object Model

    Hi guys
    I Think that is a simple error, but I don’t have enough knowledge in .NET apps.
    I make an console app that use Remote Authentication in SharePoint Online Using the Client Object Model, that a I downloaded from MSDN.
    This App run ok.
    But when I like to make a Windows From App. This component send me an error in Application.Run(DisplayLoginForm)
    This err msg :
     An unhandled exception of type 'System.InvalidOperationException' occurred in System.Windows.Forms.dll
    Additional information: Starting a second message loop on a single thread is not a valid operation. Use Form.ShowDialog instead.
    Is there any way to use a form inside a windows form?
    Thank in advance
    Ramiro
    Ramiro B

    Hi,
    Based on the error message, please do as following:
    1. Check your code logic below:
    void btn_Click(object sender, System.EventArgs e)
    Thread t = new Thread(StartMyForm);
    t.TrySetApartmentState(ApartmentState.STA);
    t.Start();
    public static void StartMyForm()
    Application.Run(new MyForm(..));
    2.Try to add the following code line in your code.
    Application.Restart();
    If the issue still exists, please provide your requirement and code for a further research.
    Best Regards
    Dennis Guo
    TechNet Community Support

  • HT5569 i dont have wifi connection , so how can i activate iphone using cable?

    i dont have wifi connection , so how can i activate iphone using cable?

    Cannot connect an iPhone to cable, Ethernet or any other wired network media. But since I assume you want to activate the phone so it works as a phone thru some carrier, you can activate it thru that carrier's data link. Just make sure you have a data plan in the contract or pay-as-you-go SIM.

  • Connecting to remote database (idle) with Password File Authentication

    Hi all,
    I was wondering if it's possible to connect to a remote database that is shut down (idle instance) as sys user with sysdba privileges? In the book Oracle - All in One on page 210 in the section - Operating System and Password File Authentication it says:
    Connection with operating system or password file authentication is always possible, no matter what state the instance and database are in, and is necessary to issue STARTUP or SHUTDOWN commands.
    Above indicates that it's possible but I'm unable to do so.
    I managed to connect to remote database that was in nomount mode (see below for details).
    When I first tried to connect to a remote database (idle instance) using password file authentication it was giving following error:
    sqlplus sys@ORCL as sysdbaSQL*Plus: Release 11.2.0.3.0 Production on Fri Dec 21 13:59:28 2012
    Copyright (c) 1982, 2011, Oracle. All rights reserved.
    Enter password:
    ERROR:
    ORA-12514: TNS:listener does not currently know of service requested in connect
    descriptor
    Enter user-name:
    After starting the database to nomount mode I was getting following error:
    sqlplus sys@ORCL as sysdbaSQL*Plus: Release 11.2.0.3.0 Production on Fri Dec 21 13:48:36 2012
    Copyright (c) 1982, 2011, Oracle. All rights reserved.
    Enter password:
    ERROR:
    ORA-12528: TNS:listener: all appropriate instances are blocking new connections
    Enter user-name:
    So I added the clause (UR=A) to my listener.ora file and after that it work and I was able to connect:
    sqlplus sys@ORCL as sysdbaSQL*Plus: Release 11.2.0.3.0 Production on Fri Dec 21 14:04:49 2012
    Copyright (c) 1982, 2011, Oracle. All rights reserved.
    Enter password:
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL>
    I have all necessairly entries in tnsnames.ora on my local host.
    Also I have no problems when connecting as sys user with sysdba when the DB is open but can't get it work on an idle instance.
    I know that I can use operating system authentication but want to know if there is a mistake in the book or I'm doing something wrong.
    Regards,
    Dawid
    Edited by: 978239 on 2012-12-21 06:24

    978239 wrote:
    Hi all,
    I was wondering if it's possible to connect to a remote database that is shut down (idle instance) as sys user with sysdba privileges? In the book Oracle - All in One on page 210 in the section - Operating System and Password File Authentication it says:
    Connection with operating system or password file authentication is always possible, no matter what state the instance and database are in, and is necessary to issue STARTUP or SHUTDOWN commands.
    Above indicates that it's possible but I'm unable to do so.
    I managed to connect to remote database that was in nomount mode (see below for details).
    When I first tried to connect to a remote database (idle instance) using password file authentication it was giving following error:
    sqlplus sys@ORCL as sysdbaSQL*Plus: Release 11.2.0.3.0 Production on Fri Dec 21 13:59:28 2012
    Copyright (c) 1982, 2011, Oracle. All rights reserved.
    Enter password:
    ERROR:
    ORA-12514: TNS:listener does not currently know of service requested in connect
    descriptorSince the database is down, the only way the listener is going to know of it is if you create a static registration by adding an entry for the db in the SID_LIST section of listener.ora
    >
    Enter user-name:
    After starting the database to nomount mode I was getting following error:
    sqlplus sys@ORCL as sysdbaSQL*Plus: Release 11.2.0.3.0 Production on Fri Dec 21 13:48:36 2012
    Copyright (c) 1982, 2011, Oracle. All rights reserved.
    Enter password:
    ERROR:
    ORA-12528: TNS:listener: all appropriate instances are blocking new connections
    Enter user-name:
    So I added the clause (UR=A) to my listener.ora file and after that it work and I was able to connect:
    sqlplus sys@ORCL as sysdbaSQL*Plus: Release 11.2.0.3.0 Production on Fri Dec 21 14:04:49 2012
    Copyright (c) 1982, 2011, Oracle. All rights reserved.
    Enter password:
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL>
    I have all necessairly entries in tnsnames.ora on my local host.
    Also I have no problems when connecting as sys user with sysdba when the DB is open but can't get it work on an idle instance.
    I know that I can use operating system authentication but want to know if there is a mistake in the book or I'm doing something wrong.
    Regards,
    Dawid
    Edited by: 978239 on 2012-12-21 06:24

  • Needed help on connecting weblogic 8.1 SP5 with oracle 10g and mysql 5.0

    Hi !!
    Hope you are doing well...
    Can anyone tell me how to connect weblogic 8.1 SP5 with an oracle 10g DB on windows..
    also, how to connect weblogic 8.1 SP5 with mysql 5.0 on windows..
    Please step by step... very urgent..
    Thanks!! Jhonson

    Shouldn't this be posted in BEA forums?
    Try getting help there and if you encounter any Oracle related exception, you can post here.

  • How to connect a remote Oracle Server with its IP

    is it possible to connect Oracle SerVer in VC
    I have used Microsoft ODBC driver for oracle and Oracle odbc driver to test in VC++6.0,
    but SQLDriverConnect, OCI methods failed.

    with VC++ an odbc driver for oracle is also installed with which u can connect to oracle db all u need to know is the database SID or oracle server name
    try doing this it will work hopefully
    regards

  • Unable to connect remote databse via windows XP(using Instant Client)

    I have downlaod instant Client and the PATH env variable automatically is set when I install Instant Client. Then I try to connect using the following(from the path C:/XEClient/bin):
    sqlplus username/passwd@//host:[port][service name]
    I get the following error:
    ORA-12170: TNS: Connect timeout occurred
    When I ping the host I get reply.
    Also I am able to connect to that same database thru perl( so I presume there is no problem with the database not avaiable or port not open etc), where additionally ORACLE_HOME and ORACLE_SID env variable are set to the path in the remote machine. The databse version is Oracle 9.2
    Below is the sqlnet.log:
    Fatal NI connect error 12170.
    VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
         Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
    Time: 30-AUG-2006 14:56:03
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12535
    TNS-12535: Message 12535 not found; No message file for product=NETWORK, facility=TNS
    ns secondary err code: 12560
    nt main err code: 505
    TNS-00505: Message 505 not found; No message file for product=NETWORK, facility=TNS
    nt secondary err code: 60
    nt OS err code: 0
    Client address: <unknown>
    ===========================================================
    Am I missing some set up.
    Can anybody help please...I have been trying since last 3 days.
    Thanks

    Hi Laurenz,
    Sorry to say...but it still does not connect(incorporated your suggestions), nor is the trace generated. sqlnet.log looks no different. As about any other oracle clients...I did not have any until yesterday evening when we installed the entire 10g oracle...client and database.
    Anyways now too after having installed oracle 10g on D drive, no succes in connecting to remote databse.
    Two questions:
    1. Is XE client compatible with 10g database? As I am trying to connect to 9.2 version as mentioned in my initial query.
    2. When I ping the host I do get reply. BUT when I telnet i.e.
    telnet host port
    ....it says "could not open connection to the host, on port XXX: connect failed"
    Does it mean there is a firewall at the remote end which is preventing the successfull connection? But then how do I connect thru' Perl with no extra info...
    Any other suggestion please let me know...and also do you suggest I uninstall all oracle clients other than XE...or is there any way out ...having multiple clients?
    Another query...hope I can use toad after having set up the XE client?
    Thanks in advance...
    Message was edited by:
    user527367

  • Can't connect to Access 2007 data with password using OLEDB

    Hi there,
    I am seeing the below error when trying to Connect to Access 2007 with password using Crystal XI or Crystal 2008, when using the OLEDB to connection Access data.
    Logon failed
    Details: DAO Error Code: 0xd0f
    Source: DAO.Workspace
    Description: Unrecognised database format 'path to database\crs project database.aaadb
    Get though when I use Access 2007 without password setup.
    Many Thanks for any one can help.
    Daphne Li

    Hi Daphne,
    Crystal can only use the top level password. If you have a system password I don't believe that will work, never has.
    Thank you
    Don

  • I am not able to connect my Mac book pro with iPhone 6  using bluetooth

    Specification of my Macbook Pro :
    Model Name:                         MacBook Pro
      Model Identifier:                   MacBookPro11,1
      Processor Name:                Intel Core i5
      Processor Speed:               2.4 GHz
      Number of Processors:       1
      Total Number of Cores:       2
      L2 Cache (per Core):           256 KB
      L3 Cache:                            3 MB
      Memory:                              8 GB
      Boot ROM Version:             MBP111.0138.B11
      SMC Version (system):       2.16f68
      Serial Number (system):     C02M4ZD0FH00
      Hardware UUID:                  1D25A9C3-C1ED-550F-8743-FF6DEAD9A59D
    OS : Yosemite 10.10.1
    I am trying to Handoff between my Macbook pro with IPhone 6+, however it is not happening. Even the Bluetooth connectivity is not
    happening between the devices.

    Try going to System Preferences/Bluetooth and then turn it off, wait a few seconds, then turn it on.
    Bluetooth Quick Assist

  • Somebody help, which wifi router is best compatible with iphone 4?

    Is there anyone to help me out in finding the best suitable wifi router for my iphone4, i tried with net gear W614 but it didnt work with iphone 4, pls guess me the best compatible wifi router for my iphone.

    senthil mvm wrote:
    Is there anyone to help me out in finding the best suitable wifi router for my iphone4, i tried with net gear W614 but it didnt work with iphone 4, pls guess me the best compatible wifi router for my iphone.
    Apple Extreme

  • Slow Internet connection with IPhones using airport extreme

    My Airport Extrem works fine with IPads and Mac Book but not with IPhones (very, very slow). Any advice?

    Its Pretty simple if you need to change the network password on the wifi Just do a soft reset
    To do this you need somethign small and skinny like a bobby pin then look at the back of the airport extreme for a tiny play button below that you stick the bobby pin in that for a full second.
    Then go to your Pc go to aiport utility double-click your aiports name then go to the base station tab and you can change your password.
    Having worse problems still?
    Then you need a hard restart to do a hard restart (like last time) take out something small and skinny (such as a bobby pin)  and look behind your airport for a tiny play button then right below that there should be a hole or a button use the bobby pin and stick it in the hole and leave it in there for 5.7 seconds then take it out and it should be rapidly blinking.
    Then after it finishes blinking rapidly you need to set it up again like you did when you first got it.

  • How to use keynote remote w/ iPad and iPhone using Bluetooth

    Using IOS 7.0.6 on iPad and iPhone can't get a connection via Bluetooth to use iPhone as a remote to control keynote on iPad. Bluetooth is on, remote is enabled in keynote on both devices but that is as far as I get. I'm looking for some instructions for what seems to be a simple process. Searched all over and only find outdated instructions or instructions that appear incomplete. I don't think my Wi-Fi connection at work will allow this type of connection that's why I want to use Bluetooth. I can't get the 2 devices to do this on my home Wi-Fi either. Using the latest  update to keynote. iPad is work issued and not sure if it is iPad or iPad 2 but I don't think this would make a difference. Any help would be much appreciated. Very frustrated at this point.
    Thank you,
    Carl

    Hey, I had some issues but I finally figured it out thanks to this article: http://www.cnet.com/how-to/how-to-use-keynote-to-control-keynote-on-ios-mac/
    Basically, you find the remote (let's say your iPhone) while your iPad has a presentation active then go to Presentation Tools on said iPad and link your iPhone. Your iPhone has to be searching for a device after you tap "Add Device."

Maybe you are looking for