Help to create a SCOM Alert for same event ID on many Windows 2008 servers

Hi all,
I 'm a newbie in SCOM and I need to create a alert with information type on 1 event ID on 2 servers. The Event ID is the same on both servers and I don't know which type of monitor I need to create. Can you help me please ?
Thanks a lot.

Hi,
First, should the server appear unhealthy if this event appears? If so, it should be a monitor. If not, it should be a rule (that will only give an alert).
Go to Authoring and Rules/Monitors. Set the scope to Windows Server. Create the Rule/Monitor and remove the "Enabled by default". In the event expression, use the parameters - these should be pretty straight forward.
Afterwards, override the rule/monitor for the two servers on which you wish to monitor this event.
This is pretty rough description, let me know if you need it more detailed.

Similar Messages

Need Help in creating Unix Shell Script for database

Would be appreciable if some one can help in creating unix shell script for the Oracle DB 10,11g.
Here is the condition which i want to implement.
1. Create shell script to create the database with 10GB TB SPACE and 3 groups of redo log file(Each 300MB).
2. Increase size of redolog file.
3. Load sample schema.
4. dump the schema.
5. Create empty db (Script should check if db already exists and drop it in this case).
6. Create backup using rman.
7. restore backup which you have backed up.

This isn't much of a "code-sharing" site but a "knowledge-sharing" site. Code posted me may be from a questioner who has a problem / issue / error with his code. But we don't generally see people writing entire scripts as responses to such questions as yours. There may be other sites where you can get coding done "for free".
What you could do is to write some of the code and test it and, if and when it fails / errors, post it for members to make suggestions.
But the expectation here is for you to write your own code.
Hemant K Chitale

Have problem setting Email alerts for Calendar events. Warning message says I need to set up a card in Contacts with my email. I do but it doesn't recognize it. How do I indicate the email I want alerts sent to?

The system of setting up email alerts for Calendar events worked fine in Snow Leopard but since I upgraded to Mt. Lion Calendar won't let me set email alerts. When I try, I get an error message saying I need to set up a card in Contacts for my email. I have a card set up in Contacts for both of my email addresses but it doesn't recognize them. Perhaps the name I have on the card doesn't match a name that Calendar is looking for. Calendar doesn't seem to have a way in Preferences or elsewhere to indicate the email I want alerts sent to. Any ideas how I can get this system working again? Thanks for your help.

You might want to consider starting a new discussion. Since this one is marked solved, less people are likely to look at it. You can link to this one.
See if another contact is marked as this is my card.

IOS 7 Calendar alerting for past events

Has anyone else experienced this ...
At 9:30 this morning (03-Oct) I got an alert for an event from last week (26-Sep).
Then at 10:00 I got an alert for another event from last week (26-Sep).
Upon examining the events, I saw the alerts set as:
9:30 event – alert 1 = one week before
10:00 event – alert 1 = 1 day before, alert 2 = 1 week before
After upgrading to iOS7 I set the default calendar alert to "1 week before" – that might explain why the second event's alert 2 is set earlier than alert 1.
But it doesn't explain the "you were supposed to be doing this last week" alert popping up.
Any thoughts (other than some date arithmetic gone awry)?

iPilot1 - after I upgraded to iOS 7.0.3 I got an even bigger surprise - the default alert time for any new event I created was "7 days after". I kid you not. At the top of the list of options, before "None".
However I just went back to the Calendar settings to check the default alert time, and nothing was ticked.
I chose "1 week before", and Hey Presto, new events default to "1 week before".
Of course, I won't know this has worked for sure until I get an alert.

Best practice for installation oracle 11g rac on windows 2008 server x64

hello!
can somebody tell me a good book or an other kind of literature regarding "best practice for installation oracle 11g rac on windows 2008 server x64"? thx in advance!
best regards,
christian

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Is Weblogic 11g supports for Kerberos AES/RC4 Encryption on Windows 2008 R2

Is Weblogic 11g supports for Kerberos AES/RC4 Encryption on Windows 2008 R2?
Thanks,

DES is disabled by default on 2008, could this DC be a Windows 2003? If so then this would be the expected encyption.
The following is the list of the encryption available for each Windows system
Windows 2000, XP,Windows Server 2003:
DES, RC4
         Vista
, Windows Server 2008:      DES, RC4,AES
         Windows 7 and Windows Server 2008 R2:     DES(disabled by default), RC4,AES
From:
http://blogs.msdn.com/b/openspecification/archive/2010/11/17/encryption-type-selection-in-kerberos-exchanges.aspx
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security, BS CSci
2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup.
This posting is provided AS IS with no warranties, and confers no rights.

Multiple SCOM Alerts for the same unique Windows Event

Multiple SCOM Alerts are being raised for a single Windows event.
For e.g., below is the event :
Date and Time: Description:
12/15/2014 5:15:36 PM Initiating move for database 'xxxdb02' (FromServer=xxxdagnode1.dt.inc, ToServer=, MoveComment=<Null>)
Log Name:
Microsoft-Exchange-HighAvailability/Operational
Source:
Microsoft-Exchange-HighAvailability
Event Number:
306
Level:
4
Logging Computer:
xxxdagnode1.dt.inc
User:
NT AUTHORITY\SYSTEM
Event Data:
< DataItem type =" System.XmlData " time =" 2014-12-15T17:15:37.9848250-05:00 " sourceHealthServiceId =" 261D34BA-3596-ABCF-3728-B5A0AC035D90 " >
< UserData >
< EventXML >
< UniqueId > 2014.12.15.05.15.35.285#9#xxxdagnode2#4d0ce477-5f5c-4304-8c59-292a4a8ca809 </ UniqueId >
< DatabaseName > xxxdb02 </ DatabaseName >
< DatabaseGuid > 4d0ce477-5f5c-4304-8b59-292a4a8ca809 </ DatabaseGuid >
< ActiveServer > XXXDAGNODE1.dt.inc </ ActiveServer >
< ActionCategory > Move </ ActionCategory >
< ActionInitiator > Automatic </ ActionInitiator >
< ActionReason > StoreStopped </ ActionReason >
< AmRole > PAM </ AmRole >
< PAMServer > xxxdagnode2.dt.inc </ PAMServer >
< MountFlags > None </ MountFlags >
< DismountFlags > SkipCacheFlush </ DismountFlags >
< MountdialOverride > None </ MountdialOverride >
< FromServer > xxxdagnode1.dt.inc </ FromServer >
< TargetServer />
< TryOtherHealthyServers > True </ TryOtherHealthyServers >
< SkipValidationChecks > None </ SkipValidationChecks >
< MoveComment > <Null> </ MoveComment >
</ EventXML >
</ UserData >
</ DataItem >
But three alerts were raised for this event.
I double checked with the Unique ID for the Windows Event.
Also the Duplicate alerts show the Same event in the 'Alert Context' field.
My environment:
3 SCOM 2012 R2 UR3 Management Servers.
1 SQL DB Server
Service Manager Connector is configured for Alert Sync. However this issue also affect the alerts that are not synced.
Anybody else faced this issue?

Hi,
It seems like that you are using rule to monitor this event, unlike monitors, rules can continue to send alerts as long as the condition that caused the alert persists or repeats. Depending on what the rule is checking for, a single issue could possibly
generate a huge number of alerts. To prevent the noise of too many alerts, alert suppression can be enabled for a rule.
More details, please check article below:
http://technet.microsoft.com/en-us/library/hh212847.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Need help in setting up Group Policy for same user in local system and Terminal server

Hi All,
Currently our remote users are using our network using VPN client over internet.
They are generally at their home computer and doing VPN as they have to work only in one RDP server for application.
We actually have a OU created for these RDP users and assign then some strict policy like they can not use any other .exe,they can not user any explorer ,they can not even use windows explorer when they are on RDP they just use one exe of their application.
Now what my management want is they want their home computers in Domain and want them to login via their same credentials they are using for RDP but they don't want them to restrict in their home computers with any strict policy.
Now my confusion is how can I configure different policies for same users or same OU.
Can any one guide me please...

you can achieve this fairly easily with group policy.
create an OU and put your remote desktop servers in that OU.
configure both user and computer policies in a group policy and link it to that ou.
you need to enable loopback mode - you may want it in merge or replace depending on your other policies you have. Probably replace though I would guess. this is set in the computer configuration > admin templates > system / group policy section.
now remove the policy you have currently setup for your users on the users OU containing the rdp users. If you want you can move these users back to your main users OU.
when your users login to the RDP server the settings in the user section of the GPO linked to the RDP Servers OU will apply.
when the user logs in to their own computer the policies from the user OU and computer OU will apply - but not the more restrictive RDP OU.
hope that makes sense.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

Create Lookup[Taxonomy] field for same taxonomy in two main tables

In MDM 7.1 SP03,
1) We have two main tables MTable1 and MTable2 in repository
2) One Taxonomy table Taxo1
3) In MTable1, Created a Lookup[Taxonomy] field for Taxo1 table
4) In MTable2, not able to create Lookup[Taxonomy] field for Taxo1
table.
Why is it not allowed to use Lookup[Taxonomy] in multiple main tables?
Thanks,
Rajesh
Edited by: Rajesh Penagalapati on Nov 12, 2009 4:53 AM
Edited by: Rajesh Penagalapati on Nov 12, 2009 4:54 AM

Hi,
Thats a limitation .Multiple Main tables cannnot share the same Taxonomy table.
You can refer the features of MDM 7.1 at
http://help.sap.com/saphelp_nwmdm71/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm
Regards
Nisha

Syncing ical creates multiple entries for same event

I'm sure this is common. I cal sync creates multiple enties for the same event. Any way to work around this?
Also, duplicate calendars are on the Iphone (2 for inbox) can one be deleted?

I think I know what can help. I also support Mac users in a mixed environment, and find that being able to access a Windows machine to test settings for my iCal users is very very helpful. If you do not have one, I could also fix this one by adding the user's account to my one Mac that runs Entourage.
On a PC: set up one of the problem accounts in Outlook, then go to Tools->Options & click on the Delegates tab. Click on a Delegate name (if they all have the same permission level, you can select all), then click the Permissions button. If the delegate have "Editor" permissions, there will be a little checked box that sends the delegate copies of all those meetings. De-select it.
Lemme know if you want Entourage instructions or if that does it for you.
The real question, of course, is why are there so many Exchange functions that iCal can't touch. Grrrr....

Help in creating the connection pool for Oracle 8i using Jdriver

Hi
Iam pretty new to Weblogic and would be greatfull if some one can help me
out in finding the parameters to be specified in Weblogic console for creating
a Connection pool for Oracle 8i database running on solaris. I have installed
necessary client libraries in weblogic machine.
The details for my database are as follows
database name : mydb
database server : 173.24.24.1
database port : 1521
username : myuser
I would appreciate if you can provide me the following details to be entered in
weblogic console for creating the connection pool
URL
DRIVER CLASS NAME
PROPERTIES
ACL NAME
PASSWORD
Thanks,
S Hari

Hari
Jdbc Connection Pool Configuration
URL= jdbc:weblogic:oracle
DRIVER CLASS NAME=weblogic.jdbc.oci.Driver
PROPERTIES
user=myuser
password=<password in mydb>
server=mydb
After configuring Connection Pool Select Targets tab. Select Server from Available
to Chosen.
Deepak
Hari wrote:
Hi
Iam pretty new to Weblogic and would be greatfull if some one can help me
out in finding the parameters to be specified in Weblogic console for creating
a Connection pool for Oracle 8i database running on solaris. I have installed
necessary client libraries in weblogic machine.
The details for my database are as follows
database name : mydb
database server : 173.24.24.1
database port : 1521
username : myuser
I would appreciate if you can provide me the following details to be entered in
weblogic console for creating the connection pool
URL
DRIVER CLASS NAME
PROPERTIES
ACL NAME
PASSWORD
Thanks,
S Hari

How to create second transport request for same programe

Hello ,
I created workbench transport request. The changes are done and still in development system.
Now I have to do another change on the same program that has to be in different transport request,
but whenever I change something, and activate it, the changes are saved in first transport. How I can
create another transport request for the same program without releasing the first one.
Thanks

Ask your basis team to provide you with a "Transport of Copies" request.
Once you get it, add your object in this request and transport. your object will be transported and the original request will not be released. Do note that the changes will still be saved in the original request but you can still transport your object without releasing the original request.
Edited by: Priyank Jain on Aug 12, 2010 4:12 AM

Can you set alerts specific for different calendars so when you create an event, the alert for the event is already set?

On google calendar if you had a calendar for work and one for school, you can set alerts for earch so when you add a class or work related event, the event is set with alerts for that calendar. Can you do that with iCal?

Hi Steven,
This is one of the reasons why I wrote Dates to iCal.
As well as automatically syncing birthday dates from Address Book, Dates to iCal can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries.
Best wishes
John M
<hr/>As I sell software on my site and ask for donations, the Apple Discussions Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Alerts for recurring events in iCal no longer display on iPhone after iOS5 upgrade

That pretty much says it. I have a daily meeting in my iCal, with two alarms set, one for 15 minutes before and one for 5 minutes before. The alerts no longer display on my phone after the upgrade. (They appear on my Mac no problem.) Has anyone else seen this problem? I have notifications turned on for iCal , set to Alerts. Tried badges, tried turning notifications off then on, to no avail. It doesn't display for recurring events that were in my calendar before the upgrade and for those created after the upgrade. I don't seem to have a problem with regular i.e. non-recurring events. Doesn't seem to matte also if it is the default calendar or a different calendar either. (I tried Reminders and that worked fine, but I don't want to have type all of my recurring events in to iCal and then in to Reminders as well....)
Thanks very much

I'm having the same problem on my iMac (works on a different phone on my MBP). I restored the iphone and no dice. I'm also constantly getting a beach ball... Hope someone out there knows a workaround.
Melanie

Alerting for System Event 6005 on Windows 2012 R2 clients.

I am trying to figure out why an Event is not showing up in the Windows System Log except when a Filter is applied.
So, open up, on the same server (2012 R2), side-by-side, two windows showing the System Log. On the RHS window only apply a filter for Event ID 6005.
Then try and find the top 6005 Event on the LHS window (which has no filter applied). The event is not there.
What am I doing wrong?? I cannot get SCOM to trigger an alert for 6005 as the Event is not showing up on 2012 R2.
(This behavior is not occurring for Windows 2012 or 2008 R2 or 2003 R2)
Thx,
John Bradshaw

Hi
never go for event id monitor/rules for shutdown of a server, as scom agent will be stopped on shutdown and agent will not able generate alert for shutdown.
SCOM has default monitoring for Heartbeat to alert on server down
refer below link
http://technet.microsoft.com/en-us/library/hh212798.aspx
http://myitforum.com/myitforumwp/2013/05/03/scom-heartbeat-failure-alert-tuning-2/
http://blogs.technet.com/b/jonathanalmquist/archive/2010/01/11/health-service-heartbeat-failure-diagnostics-and-recoveries.aspx
If the heartbeat interval is x and count is y then scom will generate alert if agent is down for x*(y-1) (example: if heartbeat interval is 120 and count is set to 3 then scom will generate alert if agent is down for 240 seconds.i.e you will never get an alert
if agent reboot <240 sec.
The port monitoring is best way to monitor serve availability.
http://technet.microsoft.com/en-us/library/hh457544.aspx
Regards
sridhar v

Help to create a SCOM Alert for same event ID on many Windows 2008 servers

Similar Messages

Maybe you are looking for