Help to evaluate ECC6 SAP Discover System

Hi,
I have access to the Online SAP Discovery system for ECC6, but SLCM or Campus is not activated.
Rather than install IDES locally, is there a SAP Online Discovery system with the latest version of Campus.
Anyone who can help will be much appreciated
Thanks
Ian

The user base prerequisites for FPN are as menioned here:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/a7cd90ba6f17b4e10000000a1553f6/frameset.htm
Hope this clarifies.
Also you might want to go through: http://help.sap.com/saphelp_nw70/helpdata/EN/43/23dc79cb0e0d24e10000000a1553f7/frameset.htm (FPN Concepts and Planning)

Similar Messages

CIN installation on ECC6 SAP system upgrated from 4.6C SAP release

Hi all,
We have a ECC6 SAP system upgrated 4 years ago from a 4.6C SAP release system. In the old SAP release we don't have installed CIN 40A for India localization, and now we need to have this functionalities has we have to do a rollout on SAP for one indian company.
Problem is that we don't have found any OSS note that explain clearly what we have to do to have in our ECC6 SAP system CIN functionalities.
After application of support packages on level 17 (up minimum required by OSS note 1175384) we have launch function j_1bsa_component_check but we have exception that country IN isn't installed.
We can't use transaction O035 as we have a SAP system already customized.
Thanks in advance for any help or useful information someone can do us about this problem.
Sorry if this couldn't be the right forum to post this type of message, but is't difficult for me, in this particular case, to find the right forum for this type of question.
Regards
Gianpaolo
Edited by: Gianpaolo Papa on Oct 22, 2010 9:55 AM

No asnwers

Data extraction from Non-Unicode ECC6 to Unicode SAP BI system

Hi,
We have an existing non-unicode ECC6 system. Currently we are installing SAP BI unicode system. Can anyone tell me are there any issues in data extraction for SAP BI from a non-unicode ECC6 system to an Unicode SAP BI system ?
Please also note that our data consists of Asian (korean, Japanese & Chinese) fonts.
Regards,
Anirban

Hi Des Gallagher,
Thank you for your reply.
I have gone through the notes suggested by you, but they suggest issues related to BW 3.x versions. We are currently on SAP_BW 700 - SP16. Also, among other notes i found note 510882 which might be helpful for custom developments.
But i am still wondering whether we are going to face major issues related to data extraction from non-unicode ECC6 system to unicode SAP_BW 700 system.
Incase you have any further details, please let me know.
Thanks in advance.
Regards,
Anirban Kundu

Need help for the message flow in sap xi system?

Hello All,
My requirement is some wat different............in the existing production system the message flow is 3500 per hour......... now we want to develop new scenario and the message flow will be 8500 message per hour.
Client is not giving me the system details ...like network details and i need to say that can we send 8500 messages in the existing system with out changing the process speed or data base.
also please advice the best ways to increase the performance in the sap xi system when the message flow is huge.
thanks in advace.
Thanks and Regards,
chinna

>
chinnasapxi wrote:
> Hello All,
>
> My requirement is some wat different............in the existing production system the message flow is 3500 per hour......... now we want to develop new scenario and the message flow will be 8500 message per hour.
> chinna
3500 to 8500 is not a message count tht needs to be worried about
but to be on the safer side what is the average size of a single message?
if the size is not a significant one u can go ahead

Generating PDF form16's from SAP HR system

Hi,
I have to explore the possibility of generating PDF form16's from SAP HR system. My clinet is currently using SAP ECC6.0 version.
Please let me know if any one has any idea on the same.
Thank you.

Hello buddies,
Is there a *new note released to take care of F4 help on the main screen of Form 16?
We have applied all the required notes, however, when we are testing the Form 16, we are unable to upload the temse file for data on Page 3 of Form 16. This is because there is no F4 help on the main screen.
Please someone help as this is a very important requirement from the client side and we are stuck with the testing.
Thanks in advance.
Evangelist@

Data connection from SAP-R3 System to Xcelsius using Web Services

Hello Everybody,
Anyone tryed connecting data from SAP-R3 System to Xcelsius using Webservices? (created in ABAP function module)
SDN downloaded document says to Generate Webservice URL through ABAP (by creating function module) and import it in xcelsius
Data -> Add Web service connections
by giving the URL to import. After giving the web server login credentials, the error says 'Unable to load URL'
Any idea would be great help
Note: I tried by following the thread & its not working:
http://forums.sdn.sap.com/thread.jspa?threadID=1520321
Thank you,
Anand
Edited by: Anand Amirtharaj on Feb 20, 2012 7:51 AM
Edited by: Anand Amirtharaj on Feb 20, 2012 7:53 AM

Hi,
With regards to your statemetn "SDN downloaded document says to Generate Webservice URL through ABAP" <- can you tell me more please? references/links/attachment?
As far as I am aware, that the type of web service required for integration it a 'normal' Netweaver Web app server web service.
There are limitations about the complexity of the WSDL - see Notes:
1653655 - Limitations in Web Service WSDL URL usage in Xcelsius 4.0
1703839 - Limitations of Web service usage in Xcelsius / Dashboard Design
also , changes between SAP versions requires reworking the WSDL
Note 1625091 - The WSDL URL for web service which generated in SAP Enterprise Central Component cannot be loaded into Xcelsius
regards,
H

Create SAP Source System Failed

Hi all,
We are using NetWeaver 2004s BI and try to connect to ECC 5.0. I tried to create SAP source system but got error message saying "RFC user logon failed". When I check RFC destination in ECC 5.0 for BI, the test connection is ok, but the remote logon will pop up another logon screen asking for id and password. I am pretty sure that the id and password in RFC destination is correct. The RFC destination in BI is ok. Can you help me out with this? Thanks a lot in advance.

Hi,
Check the Default Logon <b>Client</b> for ECC 5.0
and verifiy that the User is in the Same Client
Each RFC destination has a mapped user for specific Client..Check the Client and User in the same client
regards
Happy Tony
Message was edited by: Happy Tony

Switch over between two SAP PI systems for downtime minimization

Hello Colleagues,
with our interfaces over our SAP PI 7.31 (ABAP/Java) system we assume we will run in a 7x24 h runtime scenario in the future.
Regarding Business Continuity we have to think about solutions which help us to handle downtimes greater than 15 min. regarding Support Package upgrade, Kernel update, EHP, etc.
The first idea is to implement a second equal SAP PI productive system in parallel to the existing one.
On the sender side a switch over implementation like WebDispatcher, Load Balancer, etc.
For maintenance all Interface traffic can run over PI Nr. 1 and PI Nr. 2 can be updated.
Afterward all interfaces will switched to PI Nr. 2 and PI Nr. 1 can go in maintenance.
Could be this as suitable solution for SAP PI Business Continuity or do you know better solutions?
Many thanks in advance!
Regards,
Jochen

Hello Bernhard, Hello Holger,
many thanks for reply and providing these valuable information's.
The nZDM Concept is already known to me but it doesn’t answer all our questions.
Please let me explain a little more in detail.
Not currently but in the near future we assume some new interface over our SAP PI System will come with the requirement max. downtime lower thank 10 to 15 min. only allowed.
To be prepared regarding this possible scenario, we start thinking about possible different solutions.
First step was the nZDM Concept, of course. But it didn’t meet all our requirements regarding interface downtime.
Some points are:
possible min. downtime is 30 min. and thus is over our requirements for interfaces
only for Update (and planed for Upgrade) the SAP PI application
all operating system and database related maintenance tasks are not covered by nZDM
all Hardware (Server, Storage, etc.) as well not covered by nZDM
Among others, because of these facts we start thinking about a second equal SAP PI system beside to existing productive one.
Than line 1 will take over the whole interface traffic and in the meantime the line 2 can go in maintenance. After finalizing the maintenance for SAP PI Nr. 2 we can switch the interface traffic to SAP PI Nr. 2 to get SAP PI Nr. 1 free for maintenance.
Regarding the topic “PI Federation” I found here in these documentation's several hints regarding this scenario (two SAP PI systems in an switch over scenario).
PI Federation – An Overview
among others Page: 27
Business Continuity: Central PI integration Server with redundant Integration Server to be used in controlled switch over scenarios when upgrading or patching.
or
How to Fast-Switch Integration Scenarios between SAP PI Runtimes Part II: Web Dispatcher
But I didn’t found any further detail documentation's regarding this approach.
The solution should fit as well to our existing hardware infrastructure.
For production we use an IBM (AIX) failover-cluster switch between our both data center.
Regarding our hardware infrastructure prerequisites and downtime requirements, which solution(s) do you recommend? Is PI Federation still an option?
Many thanks in advance!
Regards,
Jochen

How to analyse the main memory usage in SAP ERP systems?

Dear expert,
I'm doing a research work about analysing the main memory usage in SAP ERP systems.
I would like to find out what is load in buffers and when. That means, which process have the control of these memories and which are always performing something, tables loaded, and so on. Becuase I tried to isolate the space needed by a simple webservice call (create one material) in my test system, but even after a $SYN there are something stored in the buffers. I use a BAPI to avoid the execution of the SAPGUI and its repercussion in the system (I know the BAPI called uses resources too, but when I run this BAPI to get the statistics, it's like ST02, I get different values). Could someone help me or recommend something specific to read? Thanks a lot in advance.

Dear expert,
Thanks a lot for your answer. The point is now that I want to isolate the memory used by a webservice that I call, I mean, I would like to know how many memory is this webservice using in each buffer. And could you tell me where could I read something about the order that things happen in SAP System when a webservice is called (always memory related), that's which steps are done to store data in buffers and so on. Thanks in advance.

Error while installing Mini SAP Basis system 4.6D test suite

Hi Gurus,
I am getting error while installing Mini SAP Basis system 4.6D test suite on my laptop. I trying to install this version under Windows Xp. I tried so many times to rectify this error but no use. i followed the instruction in the readme file.The error is below in quote.
"InstController MakeStepsDeliver:108 connection to GUI of installation tool has been cut off.Installation has been stopped."
your help very much appreciated...
Regards
dinesh.a

is win xp supported for mini sap 46d?
-> try netweaver 2004s instead ...
GreetZ, AH

Verify SAP HR connector connection with SAP Target system - OIM 11.1.2

Hi All,
We are using SAP ER 9.1.2 connector and configured as follows,
1) Installed SAP ER connector from Admin console (In oim db Common.jar, SAPCommon.jar and SAPER.jar files are created)
2) The connector guide says to copy sapjco3.jar and sapidoc3.jar shud be placed into Oracle_home/Xellerate/ThirdParty folder. As we r using OIM 11.1.2 placed it in Oracle_IDM1/server/ThirdParty folder. Also Uploaded Thirdparty file into oim db using UploadJars.sh.
3) copied libsapjco3.so file into /usr/local/jco directory and added the same path to LD_LIBRARY_PATH environment varialble
4) Restarted OIM server
5) To check if SAPJCo is correctly installed, ran below command
java –jar JCO_DIRECTORY/sapjco3.jar
java –classpath JCO_DIRECTORY/sapjco3.jar com.sap.conn.jco.rt.About
Doubt: In OIM 11.1.2 we upload files into oim db. So, how does running files in ThirdParty folder verifies SAPJCo installation.
6) Configured SAP HR IT resource parameters as given by our SAP application team.
7) Now Ran "SAP HRMS Employee Type Recon" scheduled job and facing below error,
     "oracle.iam.connectors.sap.common.util.SAPUtil : getJCOFunction() : Connect to message server host failed[[
     Connection parameters: TYPE=B DEST=10.60.1.83 MSHOST=FUSION-ECCQA.hdfcsldm.com GROUP=PUBLIC R3NAME=FPQ PCS=1
     ERROR service 'sapmsFPQ' unknown
     TIME Tue Apr 16 18:20:20 2013
     RELEASE 720
     COMPONENT NI (network interface)
     VERSION 40
     RC -3
     MODULE niuxi.c
     LINE 1814
     DETAIL NiPGetServByName: 'sapmsFPQ' not found
     SYSTEM CALL getaddrinfo
     COUNTER 1 "
Please help me in configuring SAP connector
Thanks in advance

Hi.
Have you solved this? I'm getting the same error and documentation is not clear.
It says to add an entry to /etc/service (in my case there's a service using the same tcp port) and the copy a .ini file to "root" directory, which I understand is "/" in a linux system.
Thank you.
Alex

Need suggestion on importing BC SET : UKM_DCD_CUST in SAP ERP system

Dear Gurus,
Client wants me to import BC SET : UKM_DCD_CUST into SAP ERP system. I have found BC SET : UKM_DCD_CUST in T code SCPR20.
I have read most of the SCN discussion and got two way to import BC SET into ERP system as given below. But I need the appropriate way to do this. Can any one help me in this?
1. SCPR20 -> Activate BC set -> create customizing request to import into another system as per link :Business Configuration Sets (BC Sets) and their use - Basis Corner - SCN Wiki
2. Create TR in SE01 in 000 and import into required client as per below proc:
Usual procedure
1) BC SETS will be attached to SAP note usually. Download it and unzip it , you will get a *.bcs file
2) Call transaction SCPR20  BC set --> Upload In the dialog box that then appears, specify the files that you unpacked
Import the set BC into a package that you have defined. activate it with the "Expert mode"
3) You will also get a *.txt file with prog id , obj etc entries , then you have to go to SE09 and create a transport request in the source client of your Solution Manager system (client 000). Open the *.txt and copy the entries it contains into the transport request. Use transaction SCC1 to import the data in your Solution Manager client(s)
Thanks,
Anand Aseri

2). Client copies bring the Customization data but not WorkBench . So you might have to do transport of copies from Old Dev to >New Dev.
So you are saying that the system copy from Production will not bring Workbench data and I need to bring Workbench data by transports?
*system copy from Production will bring Workbench data also, but when you do client copy from development system again on top of client which already has production customization, data and workbench requests, Production customization and data will be overwritten from development customization and data (it depends on the profile you choose for the client copy) *
However Development Workbench requests are more and also has ongoing development work which might not be available in production client and those (Ongoing development workbench requests) you need to import in new system as transport of copies after the client copy
3). If you do system copy from Production and do client copy from dev...obviously Prod customization will be overwritten with Dev rite ?
That's what I expect to happen,
Ok, however, You might need to get Development Work too from the old dev system and don't forget about setting up of partner profiles in WE20.
It's just a thought , Do you have testing client in Dev, if not,You can leave the production client in development system and use it as testing client.
Create new client which is client copy of Old Dev and import WorkBench requests *
Thanks,
Arjun

Upload of Campaign and Leads from flat file into SAP CRM system

Hi Gurus,
We need to upload Campaign and Leads from our legacy systems to SAP CRM systems. The source data will be available in the form of flat files (tab delimited)
Please let me know the possible ways of doing this.
Reward points are assured.
Thanks in advance.

Hi
you can use external list management functionality in CRM 5.0 useing the flat file tab delimited you can upload the contacts and create business partners followed by lead transaction types with business partners created and also external list management will allow you to create target groups for executing the campaigns in SAP CRM
please do reward points if helpful
regards
Dinaker vikas

Set up for Extraction the data from SAP ECC system

Hi!
I would like to analyze the transaction and master data from SAP ECC system into SAP BI system.
I have created the connection (entry for SAP ECC system) within SAP NetWeaver System.
Unfortunately when I try to load the transaction data for Info source the process does not end successfully.
There are no information within SM58 on source system.
The ST22 does not contain some suitable information.
Question:
Which settings do I miss and how can solve my problem?
(user authorization, etc.)
Thank you very much!
regards
Holger

Hi!
many thanks for your reply.
The error I get:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source
Can you please help me to identify the error?
Thank you!

Setup of ALE Audit in SAP Receiver System

Hello,
for a scenario JDBC -> XI -> IDoc, I have to setup ALE Audit in the receiver SAP sytem.
I have followed the steps in the How-To-Guide (Handle acknowledgements for IDocs):
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
However I just want to have acknowledgements sent back to SAP XI for a specific type of IDoc (source coming from the database) and not all received IDocs as there are different sender systems sending IDocs (some of them via XI some of them directly).
Is there a way to configure ALE Audit in a way ALEAUDITs are sent just for specific sender systems / IDoc types. I want to avoid that the SAP XI system receives ALEAUDIT for all inbound IDocs.

Hey,
This document describe how the handle audit the the sender and the receiver systems are SAP system, when one of the sides (sender/receiver) is not SAP system,
than the configuration become much more complex.
As of XI SP18, there are ways to control ALEAUD,
for more information, read:
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_xi/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393634373435%7d
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc

Help to evaluate ECC6 SAP Discover System

Similar Messages

Maybe you are looking for