Help to find function

hallow
did some now about function or something else that u put E (number)of course
and u get the number of D of course
regards

Alvaro,
PL check this E to D .
I know it almost looked like a Translation from <b>E</b>nglish to <b>D</b>eutsche !
~Suresh

Similar Messages

  • Help to find function for month btween date

    i need a function that i bring begda and endda and give the month btween.
    like
    begda = 01012007
    endda  =  01062007
    i get 01012007,01022007,01032007.....until 01062007
    i reward
    thankes

    Hi Shnya,
    Use Transaction SU3.
    Click on tab "DEFAULTS" (Middleone)
    In the section Date Format --the very first format is DD.MM.YYYY
    Select it and save it.
    Regards,
    Dev

  • Need help in finding the root cause the error 'Could not find function:'

    Hi fokls,
    In my workflow notification , when I click on the notification to process it , it says ' 'Could not find function:' error.
    I found the this message is coming out from the Fnd_new_messages table from the message_name 'FND_FUNCTION_NOT_FOUND'.
    Here are my questions ...
    1. FND_FUNCTION_NOT_FOUND - Is it a oracle Seeded message ?
    2. If so the error I am getting is a oracle product Bug ?
    And In between , I am getting this error for few transaction only. ( out of 100 , i am getting this error at the rate of 5 per 100 ... or less)
    3 .If its a oracle product bug then , how is 95 out of 100 transaction are succssfully wokring ?
    4. If is a custom bug , how it os not though for some other 95 transaction ?
    5. Can I expect it as Data issue ? If so what kind of data issue.
    Folks , any kind of info will be really , realy helpful for me ... please let me know your inputs for me.
    Thansk to all in advance
    Raghu

    In the error message 'Could not find function:' after colon what function name it is giving.
    'FND_FUNCTION_NOT_FOUND' is a seeded message only.
    As you are saying the error was throwing only for 5% or less notifications, is the error throwing for same kind of notifications? I mean the item type and message are same for these erroneous notifications?
    It can be that some function in particular type of workflow is error-ed out does not exists, when responding to those kind of notifications it might be throwing error.
    Please check that.
    Edited by: sarojak on Nov 12, 2010 6:16 AM

  • Can anyone help me find the airplay function on my Macbook air (new)

    Can anyone help me find the airplay function on my Macbook air (new)

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS4215
    -Griff W.

  • How to find function code for buttons on toolbar in oops alv

    Hi experts,
    I want to remove some buttons from toolbar in oops alv, i know the procedure like get function code and pass the value in a table and pass that table to IT_TOOLBAR_EXCLUDING of
    method set_table_for_first_display but I WANT TO KNOW HOW TO FIND FUNCTION CODE FOR BUTTONS ON TOOLBAR IN OOPS ALV

    Hi Prakash,
    -->First you have to set the pf status in your alv program by,
    {FORM pf_status USING rt_extab TYPE slis_t_extab.
      SET PF-STATUS 'FIRST'.
    ENDFORM.                    "PF_STATUS}
    -->Pass this Subroutine name in the Function module, Reuse_alv_grid_display's parameters i.e,
          i_callback_pf_status_set          = 'PF_STATUS'}
    *-->Then doble click on that pf status,
    From the menu bar, select Extras->Adjust Template->List Viewer,
    This will give you the existing statndard gui status of the program*
    ->Then catch that function codes in the User command Parameter of the Function module Reuse.. i.e,
          i_callback_user_command           = 'COMM'
    And make a subroutine of the name 'COMM'i.e,
    FORM comm USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
      DATA: okcode TYPE sy-ucomm.
      okcode = ucomm.
      CASE okcode.
        WHEN 'REF'.
        CALL FUNCTION 'POPUP_TO_INFORM'
          EXPORTING
            titel         = 'MANSI'
            txt1          = 'CREATED BY'
            txt2          = SY-UNAME
          TXT3          = ' '
          TXT4          = ' '
    endcase.
    Hope it helps you
    Regrds
    Mansi

  • 'Find' function doesn't work on some HP documents

    For some pdf doc's I downloaded from HP, if I copy some characters from the text and then paste them into the Find box, the characters show up as hieroglyphs (mostly squares) in the Find box. And then actually executing the Find using those characters doesn't work, because it can't find the very word that I copied them from! On top of that, if I manually type a word into the Find box (showing normal letters), it won't find it even though I can see it within the text on the page showing on the screen. Very strange! In documents other than these old HP documents, the Find function works fine.
    I looked into the document properties (menu: File >> Properties >> Fonts) and see that there are 9 fonts that have names I have never heard of before, and those fonts say "(Embedded Subset)" after the font name and "Encoding: Custom" in the font descriptions. There were a few normal fonts listed before these for that document as well.
    Anyone have any idea what is going on?
    - Brad

    It's hard to say without seeing the actual, source content, but given what you are describing, I would venture a guess that the source content is of too poor a quality to OCR reliably and accurately.  To test this theory, after running OCR, identify a term that you can confirm is present, but that the search feature cannot identify.  Then, copy and paste that term into Word or Notepad.  What I expect you will note is that a "0" (zero) has been identified as an "8," and other things of that nature.  OCR processing is garbage in, garbage out, so the source always has to be considered.  Repeat this process across the document to see if experience similar results. 
    You don't describe how exactly you are transferring the microfilm "images" to PDF, so it's difficult to say if that process is at issue or could be improved.  I suspect that's contributing to the problem, though.
    Finally, with regard to the degraded image quality, you want to make sure you are selecting "Searchable Image (Exact)" from the OCR dialogue.  ClearScan or any type of downsampling will likely cause or contribute to the type of issue you are describing.  In a situation with low-quality source material, you would not want to use these other options.
    Hope that helps!
    Jason Covey
    PDF Litigation Solutions, LLC
    www.pdflitigationguide.com

  • How does one install non-English character sets for use with the "find" function in Acrabat Pro 11?

    I have pdf files in European languages and want to be able to enter non-English characters in the "find" function. How does one install other character sets for use with Acrobat Pro XI?

    Have you tried applying the update by going to Help>Updates within Photoshop Lightroom?  The update should be using the same licensing?  Did you perhaps customize the installation location?  Finally which operating system are you using?

  • Adding 'FIND' functionality in toolbar of ALV Web Dynpro ABAP

    Hi Friends,
    I need to know whether we can add FIND functionality in toolbar of ALV display. If yes than which class will help in that, or do i need to code it.
    Pls help on this.
    Regards,
    Saud

    Hi Saud,
        If you mean that you need to highlight the Field-Value then, you can use Set Focus On A Table Cell .
    You can use the method REQUEST_FOCUS_ON_VIEW_ELEM of if_wd_view.
    For this, you can see this post --
                               How to set focus on a specific UI field at the start of an application?
    Further, you have to design 'find input-screen', submitting which will set focus on the cell that contains requested value.
    This way, you can add ( or somehow, simulate ) the Functionality of FIND, although not per se.
    Thanks.
    Kumar Saurav.

  • The Find function (Ctrl+F), mis-finds the desired simple text in Acrobat Standard, but works fine in Reader

    Adobe Acrobat X 10.1.13, Win 7 64bit, 
    The Find function (Ctrl+F), mis-finds the desired simple text. 
    This is not a scanned document.  When I search for some word that DOES exist in the document, Acrobat will highlight text that does not match at all and which does NOT contain the word.  If I select the actual word, copy and past the text, I get the selected text accurately, but when I paste the same selected text into the Find box to search for it, Acrobat still mis-finds. 
    HOWEVER, I can open the very same .PDF file in Acrobat Reader X and do not have the same problem - Find works correctly in Reader with the same .PDF. 
    What is going on?!  Both Acrobat standard, and Reader report that they are up to date.   Please help.

    Can you try rasterizing (converting the document to tiff/bmp) and then importing those image files (tiff/bmp) back in Acrobat.
    This would allow document to be re-OCRed and you will be able to search text in it. You can use lossless export/import settings to preserve the quality of ducment.
    For exporting the file:
    1: Go to File > Save As Other > Image > Tiff.
    2: Click on Settings button in the Save As Dialog and set the file settings as ZIP for Monochrome, Grayscale and Color.
    Now for importing the files back:
    1: Press Ctrl + K
    2: In the Preferences dialog, select Convert To PDF option in Categories.
    3: Choose tiff or bmp (as per the format used while exporting) and un-check Scan Optimization and OCR.
    4: Set Color and Grayscale to Zip and Monochrome to CCITT G4.
    5: Save the settings.
    6: Now import all the pages in Acrobat.
    7: You can use Combine Files feature to merge all the image files.

  • IPlanet plugin for WebLogic not working - cannot find function named wl_init

    Hi,
    I have been having this issue for the last two days. It relates to
    IPlanet plugin for WbLogic. Following is the error I get:
    [17/Apr/2003:11:41:26] config ( 2069): func_exec reports: cannot find
    function named wl_init [17/Apr/2003:11:41:26] failure ( 2069):
    Configuration initialization failed: Error running init function
    wl_init: unknown error
    Here is my environment:
    SUN E-250 Server
    Solaris 8.0 with recommended Patch-set
    iPlanet-WebServer-Enterprise/6.0SP4
    Web logic 7 SP2
    Here is how I have edited magnus.conf to include the following lines:
    Init fn="load-modules"
    shlib="/usr/iplanet/servers/plugins/lib/libproxy.so" func
    s="wl_proxy,wl_init" Init fn="wl_init"
    #ServerRoot /usr/iplanet/servers/https-cablevision5
    ..... rest of the file ..........
    As you have noticed I have put everything regrding plugin in one line.
    I have also used various other combinations of breaking this line
    into multiple lines but no use.
    What I have also noticed is that if I change the name of libproxy.so
    to some other arbitrary file name that does not exist, even then the
    error message does not change. So it looks like the library is not
    even being loaded.
    The library file is owned by root and has permissions to read and
    execute for everyone.
    I will really appreciate is I can get any help. I have noticed that
    there are folks who have posted similar problem, no one gave an answer
    to them. Please be more generous this time in furnishing with your
    opinion.
    Thanks
    Jamal

    I will try and be as descriptive as possible. I hate the posts that
    dont give any help.
    Anyway you did not mention anything about your obj.conf configuration.
    Here is how it should look, e.g.:
    Init fn="load-modules" funcs="wl-proxy,wl-init"\
    shlib=/usr/local/netscape/plugins/libproxy.so
    Init fn="wl-init"
    <Object name="weblogic" ppath="*/weblogic/*">
    Service fn=wl-proxy WebLogicHost=myweblogic.server.com\
    WebLogicPort=7001 PathTrim="/weblogic"
    </Object>
    Check the following url:
    http://www.weblogic.com/docs51/admindocs/nsapi.html
    Ok,so you probably have those in there. If not, then please check
    that you have directives in obj.conf and the magnus.conf as well.
    Again the service line should be all one line.
    Next, are you proxying by path or by suffix. I.E. do you want
    everything to go to weblogic or just .jsp. You can configure either
    way. This will change your directive. Specifically ppath means proxy
    by path. To proxy by file extension (or what i call suffix) then look
    at this url for specifics:
    http://www.weblogic.com/docs51/admindocs/nsapi.html#exts (notice the
    anchor in the link)
    Post how it goes...
    a.r.
    [email protected]
    [email protected] (Jamal Najmi) wrote in message news:<[email protected]>...
    Hi,
    I have been having this issue for the last two days. It relates to
    IPlanet plugin for WbLogic. Following is the error I get:
    [17/Apr/2003:11:41:26] config ( 2069): func_exec reports: cannot find
    function named wl_init [17/Apr/2003:11:41:26] failure ( 2069):
    Configuration initialization failed: Error running init function
    wl_init: unknown error
    Here is my environment:
    SUN E-250 Server
    Solaris 8.0 with recommended Patch-set
    iPlanet-WebServer-Enterprise/6.0SP4
    Web logic 7 SP2
    Here is how I have edited magnus.conf to include the following lines:
    Init fn="load-modules"
    shlib="/usr/iplanet/servers/plugins/lib/libproxy.so" func
    s="wl_proxy,wl_init" Init fn="wl_init"
    #ServerRoot /usr/iplanet/servers/https-cablevision5
    ..... rest of the file ..........
    As you have noticed I have put everything regrding plugin in one line.
    I have also used various other combinations of breaking this line
    into multiple lines but no use.
    What I have also noticed is that if I change the name of libproxy.so
    to some other arbitrary file name that does not exist, even then the
    error message does not change. So it looks like the library is not
    even being loaded.
    The library file is owned by root and has permissions to read and
    execute for everyone.
    I will really appreciate is I can get any help. I have noticed that
    there are folks who have posted similar problem, no one gave an answer
    to them. Please be more generous this time in furnishing with your
    opinion.
    Thanks
    Jamal

  • Help with existNode function

    I am using the existNode function to check whether a specific node exists or has a value for it in the XML.
    So, am using it within an IF condition as below;
    IF L_xml.existSNode('/ItemFamily/Style/Item/Attributes/ItemAttributes/ExtRefNo/text()') > 0 THEN
             DBMS_OUTPUT.PUT_LINE('L_xml = Style exists');
    END IF;
    Here L_xml is my initial XML message received which is a CLOB converted to an XMLTYPE.
    The above works fine.
    But after I do an EXTRACT operation on the above XML to get only the portion of it (from a particular start tag to its corresponding end tag), and feed this output for my existNode function as below;
        IF L_itm_xml.existSNode('/ItemFamily/Style/Item/Attributes/ItemAttributes/ExtRefNo') > 0 THEN
             DBMS_OUTPUT.PUT_LINE('itm_xml = ');
        END IF;
    It does not give me the desired output.
    I would like to know, if there is any restriction on the existNode usage.
    Am asking this coz am a bit skeptical on whether this is happening due to XML being stripped off its header.
    Could someone please help me find an answer for this.

    The sample data is as below;
    <?xml version="1.0" encoding="utf-8"?>
    <ItemFamily>
      <Style>
        <Item>
          <ParentExtRefNo>str1234</ParentExtRefNo>
          <PackInd>str1234</PackInd>
          <ItemLevel>str1234</ItemLevel>
          <TranLevel>str1234</TranLevel>
          <Diff1>str1234</Diff1>
          <Diff2>str1234</Diff2>
          <Diff3>str1234</Diff3>
          <Diff4>str1234</Diff4>
          <ItemDesc>str1234</ItemDesc>
          <ShortDesc>str1234</ShortDesc>
          <SuggRetail>str1234</SuggRetail>
          <HandlingTemp>str1234</HandlingTemp>
          <HandlingSens>str1234</HandlingSens>
          <SellableInd>str1234</SellableInd>
          <OrderableInd>str1234</OrderableInd>
          <ShipAloneInd>str1234</ShipAloneInd>
          <Dept>str1234</Dept>
          <Class>str1234</Class>
          <Subclass>str1234</Subclass>
          <Comments>str1234</Comments>
          <GiftWrapInd>str1234</GiftWrapInd>
          <CheckUDAInd>str1234</CheckUDAInd>
          <OriginalRetail>str1234</OriginalRetail>
          <LastUpdateId>str1234</LastUpdateId>
          <ForecastInd>str1234</ForecastInd>
          <Suppliers>
            <ItemSupplier>
              <Supplier>str1234</Supplier>
              <PrimarySuppInd>str1234</PrimarySuppInd>
              <VPN>str1234</VPN>
              <DirectShipInd>str1234</DirectShipInd>
              <LastUpdateId>str1234</LastUpdateId>
              <Countries>
                <SuppCountry>
                  <SuppCountryType>str1234</SuppCountryType>
                  <OriginCountryId>str1234</OriginCountryId>
                  <PrimarySupplierInd>str1234</PrimarySupplierInd>
                  <PrimaryCountryInd>str1234</PrimaryCountryInd>
                  <SuppPackSize>str1234</SuppPackSize>
                  <InnerPackSize>str1234</InnerPackSize>
                  <UnitCost>str1234</UnitCost>
                  <LastUpdateId>str1234</LastUpdateId>
                  <Dimensions>
                    <SuppCountryDim>
                      <DimType>str1234</DimType>
                      <DimObject>str1234</DimObject>
                      <Height>str1234</Height>
                      <Width>str1234</Width>
                      <Length>str1234</Length>
                      <LwhUOM>str1234</LwhUOM>
                      <Weight>str1234</Weight>
                      <NetWeight>str1234</NetWeight>
                      <WeightUOM>str1234</WeightUOM>
                      <LastUpdateId>str1234</LastUpdateId>
                    </SuppCountryDim>
                  </Dimensions>
                </SuppCountry>
              </Countries>
            </ItemSupplier>
          </Suppliers>
        </Item>
      </Style>
    </ItemFamily>
    The L_xml will have this as its value.
    The L_itm_xml will have the subset of the XML extracted from it as its value.
    As below;
        <Item>
          <ParentExtRefNo>str1234</ParentExtRefNo>
          <PackInd>str1234</PackInd>
          <ItemLevel>str1234</ItemLevel>
          <TranLevel>str1234</TranLevel>
          <Diff1>str1234</Diff1>
          <Diff2>str1234</Diff2>
          <Diff3>str1234</Diff3>
          <Diff4>str1234</Diff4>
          <ItemDesc>str1234</ItemDesc>
          <ShortDesc>str1234</ShortDesc>
          <SuggRetail>str1234</SuggRetail>
          <HandlingTemp>str1234</HandlingTemp>
          <HandlingSens>str1234</HandlingSens>
          <SellableInd>str1234</SellableInd>
          <OrderableInd>str1234</OrderableInd>
          <ShipAloneInd>str1234</ShipAloneInd>
          <Dept>str1234</Dept>
          <Class>str1234</Class>
          <Subclass>str1234</Subclass>
          <Comments>str1234</Comments>
          <GiftWrapInd>str1234</GiftWrapInd>
          <CheckUDAInd>str1234</CheckUDAInd>
          <OriginalRetail>str1234</OriginalRetail>
          <LastUpdateId>str1234</LastUpdateId>
          <ForecastInd>str1234</ForecastInd>
          <Suppliers>
            <ItemSupplier>
              <Supplier>str1234</Supplier>
              <PrimarySuppInd>str1234</PrimarySuppInd>
              <VPN>str1234</VPN>
              <DirectShipInd>str1234</DirectShipInd>
              <LastUpdateId>str1234</LastUpdateId>
              <Countries>
                <SuppCountry>
                  <SuppCountryType>str1234</SuppCountryType>
                  <OriginCountryId>str1234</OriginCountryId>
                  <PrimarySupplierInd>str1234</PrimarySupplierInd>
                  <PrimaryCountryInd>str1234</PrimaryCountryInd>
                  <SuppPackSize>str1234</SuppPackSize>
                  <InnerPackSize>str1234</InnerPackSize>
                  <UnitCost>str1234</UnitCost>
                  <LastUpdateId>str1234</LastUpdateId>
                  <Dimensions>
                    <SuppCountryDim>
                      <DimType>str1234</DimType>
                      <DimObject>str1234</DimObject>
                      <Height>str1234</Height>
                      <Width>str1234</Width>
                      <Length>str1234</Length>
                      <LwhUOM>str1234</LwhUOM>
                      <Weight>str1234</Weight>
                      <NetWeight>str1234</NetWeight>
                      <WeightUOM>str1234</WeightUOM>
                      <LastUpdateId>str1234</LastUpdateId>
                    </SuppCountryDim>
                  </Dimensions>
                </SuppCountry>
              </Countries>
            </ItemSupplier>
          </Suppliers>
          <UDAs>
            <ItemUDA>
              <UdaId>str1234</UdaId>
              <UdaValue>str1234</UdaValue>
              <LastUpdateId>str1234</LastUpdateId>
            </ItemUDA>
          </UDAs>
          <Channels>
            <ItemChannel>
              <ChannelType>str1234</ChannelType>
            </ItemChannel>
          </Channels>
          <Attributes>
            <ItemAttributes>
              <ExtRefNo>str1234</ExtRefNo>
              <ParentExtRefNo>str1234</ParentExtRefNo>
              <Collection>str1234</Collection>
              <PerishableInd>str1234</PerishableInd>
              <PersAvailInd>str1234</PersAvailInd>
              <ShortDesc30>str1234</ShortDesc30>
              <ItemType>str1234</ItemType>
              <ConveyableType>str1234</ConveyableType>
              <GiftWrapType>str1234</GiftWrapType>
              <LastUpdateId>str1234</LastUpdateId>
            </ItemAttributes>
          </Attributes>
          <Ticket>
            <ItemTicket>
              <TicketTypeId>str1234</TicketTypeId>
              <LastUpdateId>str1234</LastUpdateId>
            </ItemTicket>
          </Ticket>
          <Carriers>
            <CarrierService>
              <CarrierSvc>str1234</CarrierSvc>
              <DefCarrierSvcInd>str1234</DefCarrierSvcInd>
            </CarrierService>
          </Carriers>
          <Shipping>
            <ShipRestrictions>
              <Carrier>str1234</Carrier>
              <AddressCode>str1234</AddressCode>
            </ShipRestrictions>
          </Shipping>
          <Pricing>
            <RetailPrice>
              <ZoneId>str1234</ZoneId>
              <UnitRetail>str1234</UnitRetail>
              <LastUpdateId>str1234</LastUpdateId>
            </RetailPrice>
          </Pricing>
          <PackItems>
            <PackItem>
              <CompExtRefNo>str1234</CompExtRefNo>
              <Qty>str1234</Qty>
              <LastUpdateId>str1234</LastUpdateId>
            </PackItem>
          </PackItems>
        </Item>
    The existNode is functioning with L_xml as the argument but not with L_itm_xml.
    Hope you have the clarity you were seeking out for.

  • InDesign CS6: "find" function doesn't work in "Open a file" dialog box

    in InDesign CS6, "find" function in "Open" dialog box doesn't work. Help?

    Thanks so much!
    I'm using a Mac OS X version 10.7.5. I've been using inDesign for YEARS and depend on that find.
    Any other info you need????

  • Find function and spotlight - some reactions

    Hi,
    I just got at new iMac and I'm trying to get hip to what's what with Leopard. I hit a glitch when it came time to look for a file on the hard drive. Is it me or is the find function almost useless? (I've given up on Spotlight.) When I select File > Find... a window comes up that indicates the search is "This Mac". Why not use the name of the hard drive? Further along the top of this window, "Contents" is selected. (I want "File name".) Who wants to start a search with contents??? If I select a different hard drive, this row of options disappears and I just have the search field in the top right of the window. If I type into the search field, it goes back to searching content on my mac?!
    When you initiate a new search, the window is small and you inevitably have to resize the columns and window. And what's with the smart folder icon at the top of the window? For me, the results show too much info.
    Oh, and I still "like" the way it displays the file path of the found file. It's ok if the file isn't buried 10 folders deep or one has a gigantic 24" screen where resizing will show it. It seems that the find function has gotten progressively worse as the cats have come and gone. This will be unbearable at work where I have to search 100's of folders on a Windows share digging through 200,000 plus graphics and word pro files.
    Oh, I found out that when I select a file name to copy and paste it, the extension is not hilighted. Is this going to get stupid?
    And in the end, what prompted me to use the find file in the first place was I wanted to import the ical .abbu file to my new iMac. I just couldn't import this .abbu file from my other machine. Not migrating assistant, copying that iCal '.abbu' file into a folder--wherever that is on my iMac now--or importing the file using iCal will set my new iCal like the old one.
    Keith
    <Edited by Moderator>

    soehnk wrote:
    Hi,
    I just got at new iMac and I'm trying to get hip to what's what with Leopard. I hit a glitch when it came time to look for a file on the hard drive. Is it me or is the find function almost useless?
    It has some quirks, and it's not always obvious how to use it to its best, but it's far from useless.
    (I've given up on Spotlight.)
    I assume you mean the Spotlight menu. Spotlight still does the searching in Finder windows. And when you know its ins and outs (for instance, it searches both Contents and Name, you should adjust the categories listed in the menu thru the Spt Pref pane since only 20 items are listed, you can see the path to a listed item, or have it revealed in the Finder; you can use keywords for more targeted searches... and so on).
    When I select File > Find... a window comes up that indicates the search is "This Mac". Why not use the name of the hard drive?
    It's letting you search everything (all mounted volumes), not just the internal drive, giving you the widest possible search area. The bigger problem with this element is that the second "search area" option, which is the folder window you started in, isn't the default selection. I suppose the thinking there was that if you're looking in a folder and can't find what you want, you want to widen your search, not narrow it with more criteria. But most of us want that optional folder set as the default when we go into Find!
    Further along the top of this window, "Contents" is selected. (I want "File name".) Who wants to start a search with contents???
    I suppose the people who want to start with Contents aren't complaining, so we don't hear from them. But I agree that File Name should be the default. However, if you use Command-Shift-F instad of Command-F (or hold Shift while opening the File menu the Find command changes to Find By Name), you'll get a Search window whose first criterion bar is already set to "Name contains..." and you can go right for the file name.
    If I select a different hard drive, this row of options disappears and I just have the search field in the top right of the window. If I type into the search field, it goes back to searching content on my mac?!
    Yes, one of the ways to get out of a Search mode window is to click on something else for the window to display; it really should set the Search area to a disk or folder you click on. But when you do go back into Find mode by typing in the Search field, your optional Search area is now the volume you just clicked on.
    When you initiate a new search, the window is small and you inevitably have to the columns and window. And what's with the smart folder icon at the top of the window? For me, the results show too much info.
    If your search is in a current window rather than a new one, it inherits the size of the current window; try clicking the zoom button before you go into Find mode.
    Not sure what your beef with the Smart Folder icon in the window. The Find window isn't a regular folder, and it behaves just like a Smart Folder, really, and can be turned into a Smart Folder with a click of the Save button; this detail makes more sense to me than a regular folder icon or another icon altogether.
    I assume that by "show too much info" you mean the search isn't targeted enough and the list is too long? Because the only info it shows for each hit is the name, kind, and last opened date. It's missing the basic Size column, so even if you Find according to Size, you can't sort according to size! I'd call that not enough info!
    So, I'm guessing you mean "too much info" as "too many files that don't match what I'm looking for". But you can narrow your search all sorts of ways both in the Search field with multiple words, literal strings, boolean operators ("this AND that" "this OR that but NOT the other thing") and in as many criteria bars as you want to define kind, created or modified dates, folders not files, a partial file resize name PLUS a few words of the content....
    Oh, and I still "like" the way it displays the file path of the found file. It's ok if the file isn't buried 10 folders deep or one has a gigantic 24" screen where resizing will show it. It seems that the find function has gotten progressively worse as the cats have come and gone. This will be unbearable at work where I have to search 100's of folders on a Windows share digging through 200,000 plus graphics and word pro files.
    Are you referring to the squeezed-up list of folders in the Path bar at the bottom of the window? Hovering your cursor over any of the squeezed-up names shows you the full names of the interim files.
    As for digging through 200K files... again, narrowing your search with parameters like "name contains..." "modified before/after" "kind is image" or "kind is JPEG" and so on... all this is available to dig through that mountain, and it's the same kind of parameters you'd have to define for any search engine to know what you want and narrow the choices.
    Oh, I found out that when I select a file name to copy and paste it, the extension is not hilighted. Is this going to get stupid?
    Well, here we totally disagree. The non-hilite on the extension is a boon - you can select a name and rename the file without having to retype the extension. When you want the name with the extension, just select the file (not the name) and choose Copy - you can paste the whole name that way. (Other info is copied with a select-and-Copy procedure. Depending on where you do the paste, you get different things: it copies the icon, too, so if you want to paste it in a Get Info window as a custom icon, you can use that; it copies the entire file, to, so you can Copy a file in one folder and Paste it in another. The Mac pretty much knows which part of the copied info you want to use based on where you do the pasting.)
    And in the end, what prompted me to use the find file in the first place was I wanted to import the ical .abbu file to my new iMac. I just couldn't import this .abbu file from my other machine. Not migrating assistant, copying that iCal '.abbu' file into a folder--wherever that is on my iMac now--or importing the file using iCal will set my new iCal like the old one.
    .abbu is for Address Book, .icbu is for iCal - I assume this was just a typo on your part. But whichever one you meant, I have no trouble finding either one (not that I had them before I tested this based on your comment, since I use Time Machine for backing them up). However, I created both program-based backups, and each was instantly found both thru the Spotlight menu and a Search window with no problem. the icbu file's Kind is iCal Backup file; searching by Kind is "iCal Backup" should get it for you. The abbu file Kind is "Address Book Archive FIle"; searching for Kind is with that whole, or partial, description should help you find it.
    sharon

  • Question: search/find function and markers?

    FCPv1 through 7 user, now being forced to decide between Avid and Premiere, so I have tons of questions, but I will start with this:
    I need to search through my marker comments, but I notice the find function doesn't work while in the marker tab, nor does it give options to search through marker comments while in the project tab. Is this possible?
    It was also be preferable that it brings up every instance of the keyword, and not just the next instance, I am not seeing that as an option either...
    I am hoping I am just missing something and you guys can help clear it up for me.
    Here is my workflow incase it will help answer the question:
    I have a video clip, and I have to transcribe every single line of dialogue in the clip.
    I need to be able to search these dialogue lines.
    Boris soundbite does not work for this, as I need to see what is said, not find where certain things are said.
    Using subclips was my original Final Cut Pro work flow, but premiere handles subclips differently, and match framing only matches back to subclips, and not source material like I need it to. Unless of course there's a setting that makes subclips match frame to source material that I am missing, I dug around and looked for one but didn't see anything.
    Thanks.

    StevenPhares wrote:
    I need to search through my marker comments, but I notice the find function doesn't work while in the marker tab, nor does it give options to search through marker comments while in the project tab. Is this possible?
    It was also be preferable that it brings up every instance of the keyword, and not just the next instance, I am not seeing that as an option either...
    I am hoping I am just missing something and you guys can help clear it up for me.
    Markers in Premiere Pro CS Next will have this functionality. I just checked it out. Sorry that this function was not included in Premiere Pro CS6.

  • Need Help Troubleshooting Copy Function

    When I try to copy a page using the flatbed scanner, the printer will scan the page and act like it's going to perform the copy.  However, after about 20 seconds, the printer spits out a blank page and on the touchscreen, it says "Printing canceled."  (I did NOT touch anything on the printer to cancel the Copy request.)  After that, the printer never recovers, i.e. it hangs on the "printing canceled" message.  I end up powering the printer off, waiting a few seconds, powering it back on, and trying to copy the page again.  Thankfully, the copy function performs as expected, no problem.
    This process occurs every time I try to copy something, and I think it's silly to believe that I need to power my printer off then turn it back on every time I want to copy something.  My settings are very simple: Make one copy, 1-to-1 sided, black ink.
    Any help in trying to figure out why my printer does this, or how to make it work properly on the first attempt, would be appreciated.

    Hello mamacgl,
    Welcome to the HP Forums.
    I see that you are having some copy issues.
    I have seen this issue in the past and I was able to get it resolved by doing one simple step.
    Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Once the printer is powered back on, use the on/off button to do a proper power cycle.  This will do a semi power reset on the printer.
    Try another copy and let me know if you still have issues or if you have any other questions, feel free to ask.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

Maybe you are looking for