Help to hook up hp envy4500 printer to my g4

how can I get help to hook up my HP envy 4500 printer to my zg4zzzpower zzzbook

Hello ramirorcarlos,
Can you please let me know which operating system you are currently running? Have you had any others printers previously installed on you g4? Are you planning on going USB or wireless? I will watch for your reply, so we can begin troubleshooting.
Thanks,
**HevnLghHelP**
I work on behalf of HP

Similar Messages

When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered my other computers on the Wi-Fi network could no longer access the printer. The manual says Maverick OS will not allow PC's to access the printer. Any thoughts?

When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered that my other computers on the Wi-Fi network could no longer access the printer. The manual says Maverick OS will not allow PC's to share the printer. Does anyone else have this problem? My printer does not have on-board Wi-Fi but, otherwise, works fine. I shouldn't have to buy a new one. Is there a OS patch out there that would open the printer port for my PC computers?

I'm assuming that on the Mac, the System Preferences -> Sharing -> Printer Sharing -> [X] HP printer -> Everyone can print is selected? That is to say, the Mac will allow anyone to print using the printer, and that you did not try to restrict who can print.
How is your network configured? Bonjour as a protocol will NOT cross a router boundary. If you have 2 or more subnets active with the PCs on one subnet and the Mac on another, that would block the PCs from seeing the Mac.
You could have multiple subnets if you have more than one router, such as an ISP provided broadband modem/router and another WiFi Router. If the PCs are talking to one router and the Mac is talking to another, that could be a 2 subnet situation. The additional routers must be put into bridge mode, which is done differently depending on the router. But the basics are to diable DHCP and NAT services on the secondary router(s) having just one active router on the network.
Also, using Bonjour Browser on my Mac, it is showing me that the printer is being advertised as using Internet Printing Protocol, so if that is something selectable on Windows, maybe you can bypass Bonjour on Windows.

HT1515 can i hook up a ethernet printer and a usb printer to the same airport express

I want to hook up an ethernet printer and a usb printer to an airport express? Is this possible and how should I set up the airport express?

I have an Airport Extreme, 5th generation, that is hooked to the internet and is the source of my home network. I am replacing an old AXs 801.11g with an 801.11n unit. The need to run a printer on the USB port is because it is an old HP 7400 all in one with a wireless g card. I want to set the network up for all wireless N and 5 Ghz for hopefully faster network speed. It is my understanding that if the network is set that way, the wireless g printer will not be recognized on the network. Since I currently am running a ethernet only Xerox Laser on the ethernet port, I would need to hook the HP using USB inorder to keep it on the network for scanning and such. Thanks to you and your information, I think I have the bases covered. If there is a best way to set up the AXs, or if I am missing something more, I thank you in advance and look forward to your assistance.
Thanks

Please help me, How to connect my printer Canon pixma MP160 to my mac OS X Yosemite?

please help me, How to connect my printer Canon pixma MP160 to my mac OS X Yosemite?

You do not need the Setup Assistant; in fact, you do not need any software on an external hard drive. I have two LaCie's; I erased the drive as soon as I plugged it in. You will need to format it anyway because most hard drives come Windows formatted. So, if you only want to use it with the Mac, highlight it in Disk Utility and choose Mac OS Extended (Journaled) as the format and the GUID Partition scheme under Options. While doing that, it will erase the drive (and get rid of the LaCie software) - once finished, your drive is ready to use for Time Machine or any other backup plans you have for it.

I can't hook my ENVY 5530 printer to my Chromebook? Can you help me?

I cannot hook up my ENVY 5530 all-in-one printer to my HP Chromebook. Can anyone help me? I can't even download the installation software onto my Chromebook. Thanks.

Hi Volksmarch,
Welcome to the HP Support Forums. I understand that you have a Chromebook and an Envy 5530 printer and would like to get them setup and running.
Let's start by getting the printer onto your home wireless network. That can be done from the front panel of the printer using the Wireless Setup Wizard. If you are unsure how to do this the steps can be found on page 55 of your User Guide.
Now that the printer is connected to your wireless network we need to setup the ePrint feature of the printer. I have included the Getting the Printer Claim Code. Once you have the web services information sheet with your printer claim code, please follow the steps in Setting Up a Custom Email Address for ePrint.
Now that we have customized ePrint email address we need to set up Google Cloud Print. Please follow the instructions in Using Google Cloud Print with your HP Printer. Please follow the steps for an ePrint-enabled printer. You should now be able to print.
If you run into any issues with the above, please let me know at what step things went awry and the contents of any error messages.
Have a good weekend.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Help with hooking up printer

I have an old HP Desktop HP Compaq dc7900 computer. I just purchased a HP 1010 deskjet printer. The printer cord I have is not compatablile with this printer. Can this printer be connected to this computer? I am not very good with these issues and before I give up I was hoping someone might be able to help me with this problem. Should I just returnt he printer? Let me know. Thanks, PJ11397
This question was solved.
View Solution.

The dc7900 CMT (as shown here) has Serial (2, 1 optional), parallel (optional), eSATA (optional), USB 2.0 (8), USB 2.0, internal on system board (2), RJ-45, front and rear audio jacks (2 each), PS/2 ports (2), VGA connector. The Hp1010 is USB. All you need is a USB cable (as shown here) for $1.99
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Can anyone out there, wherever there is, help me with an HP 8620 printer hooking up to a Mac running 10.5.8, can it be done?inter hook up to a Mac running 10.5inter connecting to

I need help connecting an HP Office jet 8620 printer to my MacOS X running 10.5.8, can it be done?

Hello, hp only has drivers for 10.6 & up, about the only thing you can do is see if an earlier OfficeJet driver works.

Hooking up to a printer...

Hey guys. I'm trying to hook up my ne Black Macbook to an HP printer connected to my dad's old Gateway computer. How do i connect to his network or to the printer?
I've tried it several ways and I just haven't gotten it to work yet...
Please help...

Ok. So I did all of that and i tried to print something...
the first page of the print job just said this at the top...
%!PS-Adobe-3.0
%RBINumCopies: 1
%%Pages: (atend)
%APLDSCEncoding: UTF8
%%Title: (n
Did i inadvertantly skip a step or what? after it prints that at the top of the page it just shoots out blank pages...

Hooking up a Lexmark printer through a 'windows' network

I am trying to print from my eMac which is hooked up to a network, which is set through a windows computer. The printer is hooked up to the windows computer as well and I am lost, any help out there?
emac Mac OS X (10.4.7)

Thank you so much for your help, I followed the steps and had NO problems. What a huge relief and time saver that will be for me. Thanks again!!
Matt Froese

Help getting mac mini and canon printer set up on network

Hello,
I have a Canon pixma ip4000 printer and mac mini 1.66 duo OSX 10.4. Trying to get these to print on a network.
Canon was originally hooked up to a windows xp pro box, but mac wouldn't print to it.
Bought a print server (buffalo lpv3-u2) and can't get it to work either. Whether I connect through bonjour or apple talk, I can see and connect to the printer, but either the job just sits in the queue "ready to print," or, more often, soon after starting the job it gets stopped. Restarting it means it just gets stopped again.
I have tried canon drivers, guten-print, and printfab. None work.
Printer works just fine if it's connected directly to the mac.
Windows PC's print to printer through the print server just fine. Why won't the mac "just work?"
It seems like it would be more economical just to buy another printer for the mac and be left wondering why the mac wouldn't play nice with others.
Oh, well,
Thanks for any help you can offer!!
David

I'm surprised you manage to get any print via the print server. I previously tested a Netgear and D-Link print server connected to a Canon iP6000D and couldn't get the Canon drivers to work. The only option was to use Gutenprint, and at the time there was no iP models so the S800 was the best compromise. The only 'print server' I found that would work with the Canon drivers was an Airport Extreme Base Station, which I am still using to this day.
Re the quirky, this is not just a Canon issue, other vendors have the same issue when you configure the printer the way you have. The way to avoid it is to purchase the right product for the job - finding what is right is often the problem. For the record, Canon makes a number of BJ and Laser printers with wired, and in some cases wireless, network support. These devices therefore have drivers that have been designed to work on a network, unlike the drivers you currently have. At work I have an iP5200R, which I connect to from XP using Ethernet, and I also connect to with my MacBook Pro using Airport (wireless). No driver connection issues, full driver support with status feedback and no need to have the XP PC on in order to print.

PLEASE HELP! Hooking up WRT54G2 to a Verizon GT704-WG

I have searched here and google, no luck. Here is what I am trying to do. I have Verizon DSL in a two story house, Verizon only issues and uses one modem/router (Actiontec GT704-WG). I have no houses near me within 1500 feet. It is a wireless router also, just like the Linksys. My main PC is upstairs and runs Vista. My second PC is downstairs, runs XP and has a Linksys WMP110 in it. Wireless signal of no type can go through the ceiling on the first floor, not even cordless phone. Must be insulation of some sort. So, I installed an ethernet port upstairs and ran CAT-5 down the wall and installed the second port. However, my second PC is three rooms away and running CAT-5 to it is impossible. So I bought a Linksys WRT54G2 in hopes to send out the signal for the first floor. I have the main PC upstairs hooked up to the Verizon modem/router at Port#4 and internet functions perfectly. I disabled any security to remove a variable so I can get this going. I hooked up a Ethernet cable to Port#3 and ran it to the wall jack port I installed. I hooked my downstairs PC temporarily at the downstairs wall jack port and hard lined the connection to see if it is good through the wall. Perfect, everything is a go. I took the WRT54G2, upgraded the firmware on it and also disabled security. Hooked up the wall jack to Port#4 on the WRT54G2 in hopes of sending out the signal to my secondary pc to its WMP110. That is how I want my system to work.
I read you need to turn off DHCP on the WRT54G2 and select Router in the setup menu. Did that and saved. I also read change the IP of it to 192.168.2.1, did that and saved. No connection. I hook up the WRT54G2 to my PC to configure it and I cant access the setup menu. Wont let me and I have no other network adapter hooked to my PC. I turn off, hold reset button, and now it will give me the setup screen at 192.168.1.1 . So, doing this numerous times I see that it doesnt like me to change the IP of it. Call verizon, they have me basically hook it up the way I described above and setup the WRT54G2 to clone the Actiontec router, that doesnt work either. Linksys techline has me try to do some PPPoE deal and that is a no go either. I know this has to work, I have seen it done before.
I have any info someone needs to help me setup both of these routers, so I can have the downstairs just repeat the signal. Or whatever suggestion you think is better. I am just frustrated after 5 days of trying myself, verizon tech and linksys tech. All other posts from people never say if they solved it and if they did they dont say how.

Check the IP from the first router and change it accordingly on the WRT54G2
For example:- IP of the first router is 192.168.1.1 then change IP on wrt54g2 192.168.1.2 and disable the DHCP. You may get error for page cannot be displayed or the page might hung up. Just unplug the power from the router and plug it back after a few seconds. Now connect the cable to any LAN port and not internet. You should be able to go online.
Let me know if you need any further assistance.

Help me . Query in " Query Print layout Design "

Hi Everybody .
I Design Report by Query Print layout Design , So when I run Report , I see Message : " Table not found Administrator (OA DM)" .
This is My Query .
( Note :this Query is run ok in Microsoft SQL . )
Select Cast(left([dbo].[Get_rate](T0.BatchNum,left(T0.Account,4),T1.U_VNS_JType),5) as nvarchar(50))+ Cast(T0.BatchNum as nvarchar(50))As No_Number , T0.TaxDate As Date , case left(T0.Account,4)when '1112'then '0.00' when '1122'then'0.00' else [dbo].[Get_11](T0.BatchNum,left(T0.Account,4),T1.U_VNS_JType)end as Amount1 , case left(T0.Account,4) when '1111'then '0.00' when '1121' then '0.00' else [dbo].[Get_111](T0.BatchNum,left(T0.Account,4),T1.U_VNS_JType) end As Amount2 , T1.U_VNS_MEMO As U_VNS_MEMO, T1.U_VNS_VNUMBER as PV_No , T1.U_VNS_JType as 'Voucher Type' , T0.Account As AC_Code , T3.AcctName as Description , T0.Debit As Debit ,T0.Credit As Credit , T1.U_VNS_NAME, T0.U_VNS_REMARKS From BTF1 T0 Inner Join OBTF T1 On T0.BatchNum = T1.BatchNum Inner Join OBTD T2 On T0.TransID = T2.BatchNum Inner Join OACT T3 On T0.Account = T3.AcctCode Where T0.BatchNum = '[%0]' Group by Cast(left([dbo].[Get_rate](T0.BatchNum,left(T0.Account,4),T1.U_VNS_JType),5) as nvarchar(50))+ Cast(T0.BatchNum as nvarchar(50)) , T0.TaxDate , case left(Account,4)when '1112' then '0.00' when '1122'then'0.00' else [dbo].[Get_11](T0.BatchNum,left(Account,4),T1.U_VNS_JType)end , case left(Account,4) when '1111'then '0.00' when '1121' then '0.00' else [dbo].[Get_111](T0.BatchNum,left(Account,4),T1.U_VNS_JType) end , U_VNS_MEMO , T1.U_VNS_VNUMBER , T1.U_VNS_JType , Account , AcctName , T1.U_VNS_NAME, T0.U_VNS_REMARKS order by Amount1 desc
Please help me .
Thank you very much .
Message was edited by:
Tran Ba Hai

Note: This Quey if I change = [%0] by = 1 , and I run Report in SAP is ok .

HELP!!! need to print to video ASAP. NOT WORKING

Hey,
I've been trying to print to video a 3 hour piece, well, it's segments of many movies for a film festival. Anyway, i've used like 4 decks now, trying to capture on dvcam, and everytime i record something to tape, it just records like pink fuzz. i've tried using different firewire ports, and messed around with the settings. so does anyone know a sure fire way of allowing me to print to video?
Thanks,
Jared

I had this happen to me a couple of days ago, and this is what I changed:
I opened the Audio/Video Settings, then selected the A/V devices tab. Then I selected the Different Output for Edit to Tape/Print to Video check box and set the video to Apple FireWire NTSC and the audio to Firewire DV.
After doing changing these things the video signal was sent to the camera and I was good to go. Hopefully that's what you need to change.
Hope that helps.
jesse.

How do i hook up my wireless printer to my mac? it has no cd that came with it, i have no drive either, but i can't find any apps or figure out how to scan for it

need help again, thank you much.

That information should be included in the printer's documentation.
The following Apple Support document may also be helpful: OS X Mavericks: Set up a printer

HP LaserJet Pro MFP M125nw Driver Setup Error - Please Help - I can't Use My Printer

Hi,
I have just bought a new HP LaserJet Pro MFP M125nw Printer. But I can not install it. I can't use it, even one page written document.
This is the error when setup appears:
Please help me...

Hi @NafirKeyh ,
I see that you are experiencing issues installing the printer on Windows 7. I would really like to be able to help you resolve this issue.
Try these steps to see if it will resolve the issue. Disabling the Startup programs and temporarily turn off the Antivirus Software should prevent any interference during the installation.
Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
How is the printer going to be connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Help to hook up hp envy4500 printer to my g4

Similar Messages

Maybe you are looking for