Help to Install Tiger OS with external USB DVD-ROM

Hi! I would like to know if I can install Tiger with a External DVD on my G3 Ibook?. My internal CD crash, that's why I looking for an advice..
Regards.
Dave

I have a similar problem, but unfortunately, the FireWire port got thoroughly bashed before I got my hands on this machine. So while this model can, strictly speaking, run Tiger (or could if I upgraded the memory), I can't use Target Mode to do so, nor can I boot from the DVD, because this model, which was the first iBook to come with a FireWire port, only has a CD-ROM, not a DVD.
I understand that Apple used to give people the option to send in their Tiger DVD and get a set of CDs, but I can't find any trace of that on the Apple site now. I've seen Tiger on CD for sale, but it cost $179, even before shipping, and the whole point of the exercise is to avoid spending any more money than absolutely necessary (at least during this fiscal year) to upgrade to Tiger. (I've had a whole bunch o' startup costs, and don't need any more right now.)
Grga

Similar Messages

  • How do install Tiger from an external USB drive?

    I'm trying to upgrade from 10.2.8 to Tiger. How do I install Tiger from my external USB DVD drive? Tiger only comes on DVD and my G4 only has a CD ROM as an internal drive. Is there a way to boot from an external USB DVD drive?

    bamim2,
    you obviously just cracked some known hardware restrictions that not even Apple knew how to do: Don't start up from an external USB device.
    The procedure you described is the standard procedure for the startup manager. However, as Apple's article explains this does NOT work with USB-devices on PowerPC (G3, G4, G5) based Macs.

  • P67A-GD65 (B3) will not boot with external USB DVD connected.

    Damnedest thing... just put the build together last night and this was the biggest issue. If I connect my external Samsung USB DVD RW the system stops booting and only displays (B3) in the bottom right corner of my display. If I remove the USB plug the system boots and operates normally. If I connect it to the USB port after boot the system recognizes it and it works fine. The same issue occurs no matter which USB2/3 port I plug it into. I've banged around the BIOS and cannot see any issues in the boot sequence that would indicate an issue. Anyone else in das same boot?

    Quote from: cadhopper on 24-March-11, 07:19:08
    I just came to the forum for the same reason. I'm glad you had a thread already going. Mine is a Seagate 1.5T USB 2.0 hard drive and the screen reads 98 in the lower right corner. Hopefully MSI will get this fixed soon. Other than that the new system is running great.
    They are working on it. They sent me a BETA BIOS to try out. The BIOS v1.10B3 was dated 3-17-2011 and it nearly bricked my system though.  Here is the response I sent to them the other night after a few hours with a massive headache trying to bring my system back up:
    Quote
    Tried the new BIOS. While it did indeed fix the USB DVD boot issue and let me boot into windows it created a few new issues. After flashing the new BIOS would not recognize my old overclocking profiles from the v1.8 BIOS.. "hole" error. So I manually adjusted all the settings and saved the new settings. I copied them EXACTLY from my previous settings.. I had screenshots which I had printed out as a fool-proof guide. After rebooting I could no longer get into windows. BSOD. If I tried entering the BIOS by tapping the DEL button while booting the system would freeze at the "entering setup...." screen and never progress into the actual BIOS. I unplugged the power, waited a few minutes and held the clear CMOS button on the back panel down for a few seconds. After rebooting I no longer had video output. After much trial and error I ended up having to also unplug my LCD and cycle power on it as well to get video back. But could still bot get into the BIOS by tapping the DEL key during boot. Luckily I have a laptop with all the files on it and I was able to finally re-flash back to the v1.8 BIOS from a USB drive. I'm not sure what exactly you changed.. but I don't think this new BIOS version should leave BETA status.
    To their credit they promptly responded the next AM:
    Quote
    There were some changes to the CPU voltage, so your overclock settings may not work properly. We are still working on a 1.A release version. It will be updated to our website soon. http://www.msi.com/product/mb/P67A-GD65--B3-.html#/?div=BIOS
    I only wish they had informed me of the changes to the CPU voltage up front or included a change log so I could have made an informed decision as to whether or not I wanted to try the BETA BIOS. I was under the impression (mistakenly) that it simply addressed the USB DVD issue. I'll wait for the new release BIOS. I can live without the external USB DVD being plugged in at boot. Bricking my MOBO and having to RMA would be a far less desirable outcome. :p That said.. I'd still recommend this MOBO. It has relatively few issues and MSI support is responsive so far.

  • Installing SL from an external USB  DVD drive

    Hi, folks.
    The DVD drive in my MBP suddenly stopped working awhile back after I updated to 10.5.7 (won't read any disks at all), and I would like to install SL on it using an external Samsung Writemaster TS-H552U with a USB connection (Firewire is not an option with this unit, as the drive casing only offers a USB connection).
    Is this possible, and if so, what I need are step by step instructions on how to do this. Any help would be appreciated.
    Thanks in advance.

    Thanks, Kappy. I'll give that a try, but have one more question before I do:
    Do I have to watch out for any reboots during the upgrade? If so, at what point(s) do they occur, and will I need to use the OPTION key again if it does, or does it just do the upgrade in one shot and reboot normally afterwards?
    Oh, and I've already installed the latest updates for 10.5.8, and will do a disk and permission repair before I start, just to be on the safe side.
    Here's the specs for the Samsung Writemaster TS-H552U:
    http://blog.tmcnet.com/blog/tom-keating/gadgets/samsung-writemaster-tsh552u-dvd- burner.asp
    Thanks again.
    EDIT: Sorry, but I forgot to ask, how long should the upgrade take?
    Message was edited by: Maddoktor2

  • Can I install Leopard from an external USB DVD drive?

    I am trying to install Leopard onto an older PB G4 whose internal drive is shot. I have an external Pioneer USB 2 drive attached, but when the Leopard Installer prompts me to restart, the installer doesn't kick in and the computer restarts into basic OSX. I've tried to choose the Installer DVD via System Preferences "Start-up Disk" pane, but it doesn't show up. The DVD drive does have its own AC power source.
    Any help would be much appreciated! Thanks!

    Mac OS X will only boot PowerPCs with Firewire, not with USB. That's the reason it doesn't work.

  • Install Tiger OS from external FW DVD drive

    Because my G4 must be rack-mounted, I have removed it's superdrive to an external FW enclosure. Though it is the original drive, I am unable to startup from it with my full retail Tiger OS 10.4.22 disk.
    The disk mounts just fine; running the installer shows a restart button but after the restart, boots from the 10.3.9 system on the HD, with the DVD mounted on the desktop. If I manually designate the Tiger OS on DVD in startup disk, on restart, it reverts to the 10.3.9 system on the HD as well.
    I have tried C, X, option keys, These methods don't even show the DVD volume as an option.
    What now?
    G4 DP 1.42GHz   Mac OS X (10.3.9)   2G RAM

    Thank you,
    Though I have not yet solved the problem, you steered me in the right direction. My enclosure is no longer supported by Yamaha, the original manufacturer, so obviously it is suspect. I am currently waiting for a reply from OWC to see if their most up-to-date enclosures are Tiger boot-compatible before plunking down the cash. I have not been able to locate any database with this information online.
    Patchburn reported my drive as ready to go, so I guess the boot issue is not addressed by it specifically.

  • Windows installation from external usb cd rom for portege 2000

    [b]how can i install windows forom an external usb cd rom on my portege 2000

    Hi
    this is a common situation for users without an internal optical drive.
    My main hint is to install from the HDD instead of installing from a CD or DVD.
    How you reach that goal depend on your possibilities.
    The most common solution is to boot the machine into the already installed OS, copy the contents from the install media into a temporary folder on the local harddrive.
    Start the installation from there.
    If you have a clean machine (no OS) then you need to be able to boot from one of the supported devices:
    USB FDD (not USB HDD or USB CD).
    PC Card CD/DVD
    LAN
    BR
    Tom

  • Arch: Install to & run from External USB Hard Disk Drive (HDD)

    I wanted to play with ArchLinux 2009.02, but replacing the existing Debian-Lenny on the laptop's HDD wasn't an option. So I experimented with installing Arch on an external USB Hard Disk Drive.
    I have tried to make this "newbie-friendly", so I hope the more experienced will forgive the detail.
    Materials:
    Three year old Dell Inspiron 6000
         CPU = 2.0 GHz Pentium
         RAM = 2.0 GB
         Internal HDD = 80 GB
         Internal CD/DVD R/RW
    External USB HDD = Freecom FHD-2 Pro 80 GB
    Archlinux 2009.02 install CD
    Steps to install:
    1. I put the Archlinux install CD in the drive and connected the external 80 GB HDD in the USB port.
    2. When the Dell laptop was booted, I pressed F2 to enter the BIOS setup. I edited the boot sequence to the following:
         Internal CD/DVD
         External USB device
         Internal HDD
    On the Dell, you can also press F12 to select the preferred boot device for that boot.
    3. I started the laptop and the Archlinux installation menu came up and I proceeded with installation following the "Official Arch Linux Install Guide" and the "Beginners Guide".
    4. Used km to change to UK keyboard layout and then began the installer script (/arch/setup). I was installing from the core CD so I skipped the network steps.
    5. HDD preparation.
    This was fairly straightforward with two cautions:
         (a) Make very sure that the external HDD (sdb) is selected for the operations.
         (b) Remember to set the Bootable Flag for the first (/) partition on the HDD.
    I chose 20 GB for /, 2 GB for swap and the remainder for /home.
    6. The package selection and installation was fairly straightforward.
    7. Configuration of System
    This was section was straightforward with one warning:
         USB had to be added to the HOOKS in the /etc/mkinitcpio.conf file!
    I found this to be essential for my external USB HDD to function as a bootable device. Otherwise I got the same sorts of errors relating to unrecognisable file system types that other people have reported in the forum.
    The relevant line from the end of the edited /etc/mkinitcpio.conf file is below:
    HOOKS="base udev autodetect pata scsi sata usb filesystems"
    8. Installation of GRUB was the other point where caution and/or correction was necessary.
    When it asked where GRUB should be installed, I had to select sdb (my external USB HDD) and not any of the particular partitions on sdb. If the root partition sdb1 was selected then the laptop won't boot from the external USB HDD.
    The GRUB /boot/grub/menu.lst as written by the installation routine specifies hd(1,0) which doesn't work when you try to reboot from the external USB HDD. When you boot Arch from the external USB HDD, as far as Arch is concerned - at that point in time - the external USB HDD is the first drive in the system. To fix this:
         (a) When the Arch boot menu comes up, press e to edit the grub entries.
         (b) Change the first line to hd(0,0)
         (c) To the end of the kernel line add rootdelay=8
         (d) Press b to boot the system with these temporary corrections.
         (e) Once your Arch system has booted, edit the /boot/grub/menu.lst to make the above changes permanent.
    The relevant portion of my /boot/grub/menu.lst looks like the following:
    # (0) Arch Linux
    title  Arch Linux
    root   (hd0,0)
    kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/... ro rootdelay=8
    initrd /boot/kernel26.img
    # (1) Arch Linux
    title  Arch Linux Fallback
    root   (hd0,0)
    kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/... ro rootdelay=8
    initrd /boot/kernel26-fallback.img
    9. The laptop happily and consistently boots Arch Linux from the external USB HDD when it's plugged in before startup/booting.
    Running Arch from the external USB HDD seems as quick as running Debian from the internal HDD.
    So if there is a performance penalty associated with using an external USB HDD, my wife and I haven't noticed.
    In summary, the three essential points to address during installation to an external USB HDD are:
         Remember to set the bootable flag for the first partition.
         Add USB to the HOOKS for /etc/mkinitcpio.conf file.
         Correct the /etc/grub/menu.lst file.
    I hope this is helpful.
    Ted

    Hi Rookie,
    As you say, it is worth remembering the rootfstype= option for the kernel line just in case someone still has problems with GRUB after making all the other changes.
    I was working with the most recent Arch 2009.2 release.
    I only got messages about unrecognisable file system type when I tried booting with the "stock" or "as-installed" GRUB (before I edited /boot/grub/menu.lst). After editing /boot/grub/menu.lst to identify the drive correctly and add rootdelay, GRUB was able to do the rest and everything worked OK without any error messages.
    Best wishes,
    Ted

  • 2011 MBP MC700 13" cann't install win7 from  an external usb CD/DVD ROM

    My new 2011 MBP MC700 13" cann't install win7 from an external usb CD/DVD ROM,WHY?

    Yes, very annoying. Not unworkable though. We've a bucket load of different external devices too, tried all of them.
    It's not common to one OS either - can't boot OSX DVD, Ubuntu, Win7.... Only way I can is via the internal SuperDrive when it's actually internal.
    Even tried it with just 1 x Hard Disk & an External USB. No joy.
    Obviously not annoying enough for me to try and find a solution I just work around it now. Interesting it's been the same on my last three MBPs though - no problem on both the Air's I've owned.

  • Problems Installing Win7 using External, USB DVD Drive

    I have a mid 2010 15" i7 MBP which I upgraded to from 4GB to 8GB RAM courtesy of OWC.  I recently upgraded the 500GB 7200RPM HD with a 240GB OCZ Vertex 3 and using an OWC Data Doubler, I replaced the DVD SuperDrive with the 500GB Hard Drive.
    I used an External USB DVD Drive to install OS X SL On the SSD without issues. Also, I got all my updates and software installed and working without any problems.
    I've been running great for about 2 weeks now, so I decided to install Windows 7 64bit Ultimate. I ran Boot Camp Assistant and partitioned the 240GB SSD in half 120/120. Everything went fine with creating the partition. I selected to Install from the Win 7 DVD media in the USB DVD drive and rebooted.  I got a grey screen.  I turned the computer off and turned it back on.  Holding down Option, I selected the Install DVD from the Boot Menu.  I then got a screen with the Apple Logo flashing intermittently with a Circle/Cross Hatch.  So I can't get the Windows Install to start to save my life.  I know the External, USB DVD works since I used it to install OS X and I have no problems using it in OS X.  I Know the media works because I tried a test install, without activation in a VMWare Fusion VM. 
    Any suggestions are appreciated?

    So here is the answer.  The Firmware on the MacBook Pro only supports installation of OS X from External Media and will not install operating systems from 3rd Parties.  I tried to install Windows XP, Win7 Ultimate  32 & 64bit, and Ubuntu 11.04 but no success.
    Supposedly, the MacBook Air does support installation of 3rd party operating systems from external media, but I have no way to confirm this.
    I ended up reinstalling the internal DVD drive installing Win 7 and Ubuntu on the SSD.  Using rEFI, I'm able to triple boot all 3 operating systems.  Then removed the drive again and reinstalled the 2nd HD. Everything seems to be working fine.
    I'm looking for someone who has experience in Mac EFI Hacking to see if there is a way to enable booting 3rd Party OSes from external media.  I'm guessing someone could examine the MBA firmware and figure out how to hack that capability into the MBP.

  • Can I install a retail os10.5.6 from an external usb dvd drive?

    Since the internal dvd combo drive does not read double layer dvd, I tried to install the new version from an external usb dvd. The installation starts but when I have to restart the computer goes back to the first screen.

    Apple does not require any particular type of dvd Just says "an external dvd"
    What document are you referring to? The fact that you can read/write with a particular DVD drive does not necessarily mean you can boot from it.
    If you have another Mac available, you can probably "borrow" its DVD drive for your OS installation by using FireWire Target Disk mode.

  • How do I install Tiger on an external HD?

    Can I install Tiger on an external HD connected via FW from the laptop to which it's connected? It seems like the installation disk wants to restart the laptop and only install it there.
    How do I do a fresh install of OSX on this external HD?

    It shouldn't be a problem.
    First, run Disk Utility, make sure the FW Drive is formatted HFS+.
    Let the Install disk reboot, once running off the Installer, you'll come to a spot to choose the disk to install to.

  • NEED HELP! - Installing Camera raw presets from USB Stick

    NEED HELP! -installing Camera raw presets from USB Stick.
    I am attempting to install the Camera Raw Presets. 
    It says to put them into User Name/Library/Application Support/Adobe/CameraRaw/Settings... 
    When I get to CameraRaw the ONLY folders in there are CameraProfiles & Lens Profiles. 
    I have searched everywhere looking for a CameraRaw-Settings folder and cannot find one. 
    I have latest version of CameraRaw installed and still no settings folder. 
    I even attempted to find it by looking in camera raw where it has saved the custom settings I made as presets and it shows that they are saved but will not show me where. 
    I am using CS5 specifically Photoshop v12.0.4 and Bridge. I have Lightroom 4. I have iMac OS  10.7.3
    Do I need to reinstall Camera Raw and how do you do that?
    Will I then lose my presets that I made in CameraRaw?  
    Thanks for your help

    Here is a note from the ACR 7.1 beta release.  http://labs.adobe.com/technologies/cameraraw7-1/?tabID=details
    Perhaps this answers question.
    Frequently Asked Questions
    Why is it no longer required to place the plug-in file in the specified directory on my hard drive?
    The Camera Raw update process has grown to include lens profile and camera profile files which are easiest to install via a single installer process instead of updating several different directories manually.

  • Installing Solaris 10 11/06 from an external USB CD-ROM drive

    Hello. I recently purchased a new SunFire V245 SPARC server and would like to re-install Solairs 10 on it. However, the internal DVD-ROM is on back order from the vendor and will not arrive for a few days. I have an exteranl USB CD-ROM drive and the server sees it and the media when I access it from the Java desktop. However, I cannot boot from this device or see it in OpenBoot using any of the probe command. I've searched several forums and have seen that Solaris 10 can be installed from an external USB device on the x86/x64 platform. But I cannot find any information or steps on how to implement this procedure on the SPARC platform. Is this functionality possible? Or do I have to update my OpenBoot version? Please advise if possible. Thanks.

    Hello Alex,
    no, you can't use USB devices on SPARC as boot device.
    The OBP (even updated ones) contains only support for the USB keyboard, but none for USB mass storage (which requires a device driver). The integrated USB ports are for slow devices like keyboard and mouse.
    Using an external SCSI DVD-ROM works. Another choice is an installation via network.
    Michael

  • I have an older Microtek scanner that is only supported thru 10.4. Is there anyway to install Tiger on my external HDD that will be bootable by my new iMac? If not. anybody need a reliable scanner (Tiger users only).

    I have an older Microtek scanner that is only supported thru 10.4. Is there anyway to install Tiger on my external HDDthat can boot up my new iMac? If not, anybody need a good scanner (Tiger users only please).

    Hi Bill,
    Not possible to run Tiger on a new Mac at all.
    The good news is that VueScan supports many Mikrotek scanners & is free to try...
    http://www.hamrick.com/vuescan/vuescan.htm#microtek
    http://www.hamrick.com/

Maybe you are looking for