Help to migrate 10.6 server hardware

Hello all,
in order to free some hardware for Lion testing, I moved the system disk of my 10.6 server to another computer. There it boots as I expect from macos, I can log in locally, run server admin local and remote. But I cant log into workgroup manager any more. Also, mail access is denied. I suspect some certificate issue that is bound to the hardware somehow, but cant find any hint so far. IP address is the same.
I would be glad to get some hints on how to avoid reinstalling the server.
Thank you,
Markus

Felix,
First the caveat. I have read and been told in emails that it is not recommended nor supported to migrate ppc data onto an intel machine and will not work. I have separately read that this does work, however, usually with some things that seem to not work for no good reason, so this may all be moot to discuss, but let's continue.
Probably the simplest (and least in new HW) would be to put your (I am assuming it is a MDD) G4 into Target Disk mode, connect it via Firewire to the new Mac Pro, and it will mount on the Mac Pro's Desktop.
Reboot the Mac Pro with your 10.5 Server DVD. (again, I am assuming it can boot this new HW, some Mac Pro's need a SPECIFIC version of 10.5 to boot, check http://support.apple.com/kb/HT1159 to be sure), and 'restore' the firewire disk to the main HD on the Mac Pro from Disk Utility.
Next best i coudl think if is if you have an external HD, boot the MDD from the install dvd, clone its boot HD to the external HD and then move the external HD to the Mac Pro, boot from the install dvd and restore the external HD to the Mac Pro.
After each act of putting the data into the Mac Pro (from the G4) you MUST install an OS over it. As I said, the code on your g4 is ppc only. Rosetta will NOT run the system from boot up. You must get intel code on there to be able to boot it.
Hht,
Peter

Similar Messages

Migrating server hardware replacement oes11 to oes11sp2

This summer I will be replacing server hardware at one of my schools. Currently it has sles11sp1 / oes11 -- put in in 2012. The patches are up to date for this version, but I have not upgraded/migrated it to a newer version yet. I have played in a test environment with the yast2 wagon migration from sles11sp1/oes11 to sles11sp2/oes11sp1 -- no problems. However trying to find notes on how to do a migration and identity transfer from source server hardware to new target server hardware. Found oes11sp2 migration tool administration guide. I haven't found anything telling me how to setup sles on the target server box ie server name etc. Once I have the target sles server setup, I realize I need to install OES and select the "Novell pre-migration server" option during this installation.
Current source server = sles11sp1/oes11 and has iPrint, Nss and netstorage installed. Installed in tree with oes11 and oes11sp1 servers.
The main tree server has sles11sp2/oes11sp1 on it. We will need to upgrade it to sles11sp3/oes11sp2 this summer. I'm fine with doing the yast2 wagon migration on that server. We just haven't done server hardware replacements for OES-L yet.
Looking for some good (step by step) instructions. ;-)
Thanks
Patty

Originally Posted by amdsbnovell
Thanks Thomas. Just printed the document now. If my current sles11sp1/oes11 server is called testfs for instance, then I need to install the new target server as a sles11sp3 server called tempfs. Then install oes11sp2 into the tree in a temporary location in the tree as a premigration server (for the installation). Then I should be able to follow the instructions. When I do the identity transfer, I'm assuming it renames the sles11sp3 server from tempfs to testfs as well (as that is where oes gets the file server name from)?
Um, sorta. Let's pretend your server name is: OLD and the new one is NEW (temporary NEW name and temporary NEW IP)
OLD: OES11
NEW: OES11 SP2 (assuming you want latest stuff).
Do all your data transfer/consolidations/etc
Then when you do the ID transfer, it will literally transfer the eDir databases (well copy is more correct) from OLD to NEW, you shut off OLD, I think it restarts NEW and renames/changes the servername and IP to what OLD had.
You can choose to install the NEW server with the .ISO separately (ie: Install SLES11 SP3, then after you're done, Add On the OES11 SP2 .ISO), or you may choose to use the integrated DVD and do it all at once, or use the 2 separate ISO and do them at once (but depending upon your installation method, you may not be able to do the 2 separate ISO).
I hope that helps.
I'm about halfway through editing my docs for OES11 SP1 (of course, SP2 is out now) for migrations from OES2 SP3, but the same setup steps basically apply. I think the only things that changed from NW To OES (ie: OES2 to OES11) are DHCP and iPrint migration procedures.
--Kevin

Hardware Migration from one server to another server

Hi All,
We require more information pertaining to hardware migration from one server to another server without changing OS & DB.
We are preparing installation guideline document for the same.
Has anybody came across similar scenario?.
Any pointers on this will be highly appreciated.
Regards
Tushar Vhora

usually you don't have to care too much about the tools used (r3ldctl = R3load control | r3szchk = R3 size checker | r3load = R3 Load), because you normally use r3setup/sapinst to fulfill the copy/migration. r3setup/sapinst will call the appropriate tools with the needed options...
-> which release are we talking about?
-> which os and which database do you use?
-> how big is your source database?
-> do you have any time issues while making the copy?
GreetZ, AH

Need Help to identify the server hardware high level details

Hi All,
I have browsed and i couldn't find the high level hard ware details.
Can any one help me to take the below hardware HIGH level details of the sun solaris server machine.
1.CPU processor name.
2.CPU processor speed.
3.Total RAM size
4.Overall hard disk space.
Thanks in Advance,
Senthur

Hello chandandascyr07. I don't think Linksys will be able to provide you the GPIO data since it's basically a proprietary company information.

How to migrate os x server to new hardware

I am looking for the quickest easiest way to migrate OS X server to new hardware that I purchased. I currently have both DHCP and DNS services actively running. I have VPN services running when needed.

Reid,
Thanks for your response. I actually migrated everything that I needed over about an hour after I posted. For DNS I simply copied all of the zone files in /Library/Server/named and restarted the DNS service. DHCP took a little more investigation as I had to find where the configuration file was being stored. I eventually found the configuration in /etc/bootpd.plist file that contains all of the DHCP info and copied it over to the new system. Once I restarted all services everything was working fine.
I took this approach rather than a direct cloning as I wanted a clean install of everything on the target system. Also, as I mentioned before, I didn't have many services running that I needed to have running on the new configuration. The VPN services that I was running had only one test user so recreating it from scratch was a non-issue.
Regards,
André

Documentation Required: Migrate uPerform to New Hardware

Hi All,
I am currently looking at what it would take to migrate the uPerform server to updated hardware that is still in compliance with the recommended specifications. So far I haven't found anything helpful in OSS notes or other documentation from the SAP support side. I did find what appears would help me on Ancile's support portal but the site requires login credentials: Online Guide to Moving uPerform Databases in Microsoft SQL in uPerform 4.30 or Higher .
Can anyone provide information on where to find any SAP documentation on hardware migration activities for uPerform? Can the software just be installed on the new target and databases restored from the source application server, or are other flat files etc. required? Any document or input would be appreciated.
Thank you!

Thank you, I have opened an incident as directed. Additionally, I would still be interested for any info or issues encountered from others who migrated to new hardware.
Thank you.

ADPrep Migration from Windows Server 2003 to 2012 Foundation Server fails with error 0x80004005

Hi all,
Having a problem the forums and Google have been unsuccessful in helping me with. Server is Windows 2003 R2, migrating to Windows Server 2012 foundation. Have tried the AD Migration on the new 2012 Foundation server both as a standalone server
and a domain server member before running the migration. I get the following error:
ADPrep execution failed --> System.ComponentModel.Win32Exception (0x80004005): A device attached to the system is not functioning
I've checked the ADprep logs and have found the following:
[2013/01/22:11:15:01.000]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=abd97102-88dd-4013-a009-0e2c2f967ff6,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[2013/01/22:11:15:01.001]
LDAP API ldap_search_s() finished, return code is 0x0
[2013/01/22:11:15:01.001]
Adprep checked to verify whether operation cn=abd97102-88dd-4013-a009-0e2c2f967ff6,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local has completed.
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2013/01/22:11:15:01.001]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=134428a8-0043-48a6-bcda-63310d9ec4dd,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[2013/01/22:11:15:01.001]
LDAP API ldap_search_s() finished, return code is 0x20
[2013/01/22:11:15:01.001]
Adprep verified the state of operation cn=134428a8-0043-48a6-bcda-63310d9ec4dd,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2013/01/22:11:15:01.021]
Adprep was unable to complete because the call back function failed.
[Status/Consequence]
Error message: Unable to access the computer "SERVER.apl.local". The network path was not found.
(0x80070035).
[User Action]
Check the log file ADPrep.log, in the C:\Windows\debug\adprep\logs\20130122111500 directory for more information.
DSID Info:
DSID: 0x1811132a
winerror = 0x1f
NT BUILD: 9200
NT BUILD: 16384
[2013/01/22:11:15:01.021]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20130122111500 directory for more information.
We did have AVAST Antivirus installed on the server but this was removed. Any idea's?
Jason.
Consultant | Nerd | Visionary. http://www.ethertech.com.au/ | http://www.deeperstates.com.au

Hi Biswajit et. al., thanks for your help thus far, it is greatly appreciated...
Unfortunately I had already disabled the NIC's on both hosts. They currently remain disabled. I've just tried turning off IPv6 as well and no luck.
PortQry came back fine (I think) :)
=============================================
Starting portqry.exe -n server.apl.local -e 135 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 135 (epmap service): LISTENING
Using ephemeral source port
Querying Endpoint Mapper Database...
Server's response:
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncalrpc:[dhcpcsvc]
UUID: f1ec59ab-4ca9-4c30-b2d0-54ef1db441b7 Isolation Communication Endpoint
ncalrpc:[LRPC00001d40.00000001]
UUID: f1ec59ab-4ca9-4c30-b2d0-54ef1db441b7 Isolation Communication Endpoint
ncalrpc:[LRPC00001448.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[OLE4EF57D32A0DB45F9A64653468D7C]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000012ac.00000001]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncacn_np:\\\\SERVER[\\pipe\\tapsrv]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncalrpc:[tapsrvlpc]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncalrpc:[unimdmsvc]
UUID: 3473dd4d-2e88-4006-9cba-22570909dd10 WinHttp Auto-Proxy Service
ncalrpc:[W32TIME_ALT]
UUID: 3473dd4d-2e88-4006-9cba-22570909dd10 WinHttp Auto-Proxy Service
ncacn_np:\\\\SERVER[\\PIPE\\W32TIME_ALT]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncalrpc:[OLE7C4E3B9B79D8492CBA384F149E08]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncacn_ip_tcp:10.0.0.3[1111]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncalrpc:[DHCPSERVERLPC]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncalrpc:[OLE7C4E3B9B79D8492CBA384F149E08]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncacn_ip_tcp:10.0.0.3[1111]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncalrpc:[DHCPSERVERLPC]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncalrpc:[LRPC00000480.00000001]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncalrpc:[LRPC00000480.00000001]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncalrpc:[LRPC00000480.00000001]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncalrpc:[OLE43978C47C6F54B5499302BAB2F50]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncacn_ip_tcp:10.0.0.3[1090]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncalrpc:[LRPC00001060.00000001]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncacn_np:\\\\SERVER[\\pipe\\WinsPipe]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncalrpc:[OLE43978C47C6F54B5499302BAB2F50]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncacn_ip_tcp:10.0.0.3[1090]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncalrpc:[LRPC00001060.00000001]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncacn_np:\\\\SERVER[\\pipe\\WinsPipe]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncacn_ip_tcp:10.0.0.3[1067]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncalrpc:[LRPC00000d10.00000001]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncacn_ip_tcp:10.0.0.3[1067]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncalrpc:[LRPC00000d10.00000001]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncacn_ip_tcp:10.0.0.3[1067]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncalrpc:[LRPC00000d10.00000001]
UUID: 50abc2a4-574d-40b3-9d66-ee4fd5fba076
ncacn_ip_tcp:10.0.0.3[1048]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[audit]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[securityevent]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[protected_storage]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[dsrole]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[NTDS_LPC]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_http:10.0.0.3[1027]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[audit]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[securityevent]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[dsrole]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[NTDS_LPC]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_http:10.0.0.3[1027]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[audit]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[securityevent]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[dsrole]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[NTDS_LPC]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_http:10.0.0.3[1027]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[audit]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[securityevent]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[protected_storage]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[dsrole]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[NTDS_LPC]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_http:10.0.0.3[1027]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[audit]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[securityevent]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[protected_storage]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[dsrole]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[NTDS_LPC]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[audit]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[securityevent]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[protected_storage]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[dsrole]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[NTDS_LPC]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[audit]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[securityevent]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[protected_storage]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[dsrole]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[NTDS_LPC]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[OLE8B33809919104CE5B44970B01637]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncalrpc:[wzcsvc]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncalrpc:[wzcsvc]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncalrpc:[wzcsvc]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncalrpc:[DNSResolver]
Total endpoints found: 125
==== End of RPC Endpoint Mapper query response ====
portqry.exe -n server.apl.local -e 135 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 389 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 389 (ldap service): LISTENING
Using ephemeral source port
Sending LDAP query to TCP port 389...
LDAP query response:
currentdate: 01/28/2013 14:11:54 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
UDP port 389 (unknown service): LISTENING or FILTERED
Using ephemeral source port
Sending LDAP query to UDP port 389...
LDAP query response:
currentdate: 01/28/2013 14:11:57 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
UDP port 389 is LISTENING
portqry.exe -n server.apl.local -e 389 -p BOTH exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 636 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 636 (ldaps service): LISTENING
portqry.exe -n server.apl.local -e 636 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 3268 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 3268 (msft-gc service): LISTENING
Using ephemeral source port
Sending LDAP query to TCP port 3268...
LDAP query response:
currentdate: 01/28/2013 14:11:57 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
portqry.exe -n server.apl.local -e 3268 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 3269 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 3269 (msft-gc-ssl service): LISTENING
portqry.exe -n server.apl.local -e 3269 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 53 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 53 (domain service): LISTENING
UDP port 53 (domain service): LISTENING
portqry.exe -n server.apl.local -e 53 -p BOTH exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 88 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 88 (kerberos service): LISTENING
UDP port 88 (kerberos service): LISTENING or FILTERED
portqry.exe -n server.apl.local -e 88 -p BOTH exits with return code 0x00000002.
=============================================
Starting portqry.exe -n server.apl.local -e 445 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 445 (microsoft-ds service): LISTENING
portqry.exe -n server.apl.local -e 445 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 137 -p UDP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
UDP port 137 (netbios-ns service): LISTENING or FILTERED
Using ephemeral source port
Attempting NETBIOS adapter status query to UDP port 137...
Server's response: MAC address 000423c733ec
UDP port: LISTENING
portqry.exe -n server.apl.local -e 137 -p UDP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 138 -p UDP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
UDP port 138 (netbios-dgm service): LISTENING or FILTERED
portqry.exe -n server.apl.local -e 138 -p UDP exits with return code 0x00000002.
=============================================
Starting portqry.exe -n server.apl.local -e 139 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 139 (netbios-ssn service): LISTENING
portqry.exe -n server.apl.local -e 139 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 42 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 42 (nameserver service): LISTENING
portqry.exe -n server.apl.local -e 42 -p TCP exits with return code 0x00000000.
Jason.
Consultant | Nerd | Visionary. http://www.ethertech.com.au/ | http://www.deeperstates.com.au

Problems after print server migration to Windows Server 2008 R2

Hi all,
New forum member, first time poster. I am at my wits end and have concussion from banging my head on the desk for several days running. Hopefully someone here may be able to help.
Environment
I have recently moved our printing environment from a Windows Server 2003 machine to a new Server 2008 R2 machine in prep for rolling out Windows 7 x64 clients. We have 30-40 printers, majority of which are HP's (M2727's, P4015dn's, CM3530's, P2035's & a CM8060).
My procedure for setting up the printers on the new server involved manually creating each printer and using up-to-date drivers, we wanted to start fresh. The HP's are all using the HP Universal PCL 5 or PCL 6 (61.115.1.10527) x86 & x64 driver. We use Desktop Authority on logon to install the required printers for each client.
Problems
Since everyone is now running through the 2008 R2 server we have had a bunch of intermittent problems pop up all over the place, mostly with our HP printers. When using the PCL6 driver some applications print a page or 10 of garbled gibberish (wingdings etc), so most printers are now using the PCL5 driver. Other applications print the error "PCL XL error" when using PCL6. Sometimes reinstalling the printer on the client machine will resolve these errors, however they tend to resurface.
When we use the PCL5 driver our M2727's intermittently report "Out Of Memory" on the printer display (they are stock with 64M RAM each) - upgrading the RAM may fix this but we never had this problem before on the 2003 server. This problem is not specific to the size of the printed document - it could be a 20 page report or a 2 page excel document. Resetting the printer will generally clear this issue temporarily. This is currently our most annoying/biggest issue.
Some people are having issues printing to a FujiXerox 340A-AP printer - in particular 1 person is able to print fine, where as another prints and the print margin appears to be far too small. After confirming all print margins on the server then reinstalling the printer on the client machine, the problem still persists. We have two FujiXerox printers, the second one is working as intended for 8-10 users with the exact same settings.
Attempted Fixes
These are some of the attempted fixes that I have tried:
Turning it off and on
Upgrading the firmware on the M2727's to resolve garbled printing & out of memory
Upgrading the firmware on the CM3530's to resolve garbled printing
Reinstalling all HP Universal PCL5/PCL6 x86 & x64 drivers on the print server
Ensuring that the 2008 R2 server is 100% up-to-date with MS patches
Backing up all printers on print server, removing the print server role, deleting all printers & drivers, rebooting, reinstalling the print server role and restoring all printers from backup
Upgraded Desktop Authority to the latest version - as this application is in charge of installing the printers on logon
As you can see we are having a lot of problems and nothing seems to make any sense. None of this happened before Windows Server 2008 R2 was brought in to the equation.
If anyone is able to provide any assistance that would be greatly appreciated.
Many thanks,
Hartz.
tldr; our printers are screwed since migrating to Windows Server 2008 R2.

Hi all,
New forum member, first time poster. I am at my wits end and have concussion from banging my head on the desk for several days running. Hopefully someone here may be able to help.
Environment
I have recently moved our printing environment from a Windows Server 2003 machine to a new Server 2008 R2 machine in prep for rolling out Windows 7 x64 clients. We have 30-40 printers, majority of which are HP's (M2727's, P4015dn's, CM3530's, P2035's & a CM8060).
My procedure for setting up the printers on the new server involved manually creating each printer and using up-to-date drivers, we wanted to start fresh. The HP's are all using the HP Universal PCL 5 or PCL 6 (61.115.1.10527) x86 & x64 driver. We use Desktop Authority on logon to install the required printers for each client.
Problems
Since everyone is now running through the 2008 R2 server we have had a bunch of intermittent problems pop up all over the place, mostly with our HP printers. When using the PCL6 driver some applications print a page or 10 of garbled gibberish (wingdings etc), so most printers are now using the PCL5 driver. Other applications print the error "PCL XL error" when using PCL6. Sometimes reinstalling the printer on the client machine will resolve these errors, however they tend to resurface.
When we use the PCL5 driver our M2727's intermittently report "Out Of Memory" on the printer display (they are stock with 64M RAM each) - upgrading the RAM may fix this but we never had this problem before on the 2003 server. This problem is not specific to the size of the printed document - it could be a 20 page report or a 2 page excel document. Resetting the printer will generally clear this issue temporarily. This is currently our most annoying/biggest issue.
Some people are having issues printing to a FujiXerox 340A-AP printer - in particular 1 person is able to print fine, where as another prints and the print margin appears to be far too small. After confirming all print margins on the server then reinstalling the printer on the client machine, the problem still persists. We have two FujiXerox printers, the second one is working as intended for 8-10 users with the exact same settings.
Attempted Fixes
These are some of the attempted fixes that I have tried:
Turning it off and on
Upgrading the firmware on the M2727's to resolve garbled printing & out of memory
Upgrading the firmware on the CM3530's to resolve garbled printing
Reinstalling all HP Universal PCL5/PCL6 x86 & x64 drivers on the print server
Ensuring that the 2008 R2 server is 100% up-to-date with MS patches
Backing up all printers on print server, removing the print server role, deleting all printers & drivers, rebooting, reinstalling the print server role and restoring all printers from backup
Upgraded Desktop Authority to the latest version - as this application is in charge of installing the printers on logon
As you can see we are having a lot of problems and nothing seems to make any sense. None of this happened before Windows Server 2008 R2 was brought in to the equation.
If anyone is able to provide any assistance that would be greatly appreciated.
Many thanks,
Hartz.
tldr; our printers are screwed since migrating to Windows Server 2008 R2.

Migration from SQL Server 7 to oracle 8.1.7 on windows 2000 professional

Hello All,
I am currently working on Database migration from sql server 7 to oracle 8.1.7.
My setup is as follows:
1. Both the databases (sql server and oracle are on the same machine )
2. My sql server database contains 200 tables and 190 stored procedures, which need to be migrated to oracle.
When i am trying to capture the Source database details, its capturing evry thing but when its mapping at the end ...it says "MAPPING ROLE PUBLIC" and its not proceeding furthur..What do u want me to do ? i waited for approx 1 hr , still its not proceeding....How to resolve this bug ?
Also please suggest me the best methodology for Migrating the stored procedures. allmost all my stored procedures have TEMP Tables implemented in it. Please help me in this...
Also please let me know the Timeframe estimate for this total thing to be done..
Waiting for your reply,
Thanks and Regards
SAI SREENIVAS JEEDIGUNTA

You can user Oracle Migration Workbench to migrate from SQL Server to Oracle.
Here is the link which gives info on software usage and download :
http://otn.oracle.com/tech/migration/workbench/content.html
Chandar

How to check server hardware and OS issue without offline DB server

Hi Experts,
For checking hardware issue, do we have any way to check server hardware and OS performance without offline server?
any way we could rule out bad hardware causing the problem without offline server?
Thanks
Jim

I think your answer depends on the nature of the hardware issue you think you may be having, whose hardware you have, and the OS your are running on that hardware. Such as on UNIX there are several error logs that record errors related to the system including detected hardware issues and you have numerous utilities like vmstat and iostat that can be used to measure performance. Some disk units linclude their own diagnostics modules you can run.
If you really want help I think you have to be a lot more specific about the problem you are facing.
HTH -- Mark D Powell --

Problem with migrating data (SQL Server 2k offline data capture)

Hi there,
I try to migrate a SQL Server 2000 database to Oracle 10g (R2) using offline data capture. I following the online Tutorial “Migrate from Microsoft SQL Server to Oracle Database 10g Using Oracle Migration Workbench” and everything seems OK until “Migrating the tablespaces, users and user tables to the destination database” http://www.oracle.com/technology/obe/10gr2_db_vmware/develop/omwb/omwb.htm#t5. I have two errors on 2 (out of 85 ) tables saying “ Failed to create default for Table :
ORA-00907: missing right parenthesis”. I checked the column/table names and they seems OK. I don’t understand why I got these errors. However, when I checked the ‘SA’ Schema in Oracle Enterprise Manager Console, I can see all the tables (including the two problem ones).
I then carry on to the next step and tried to migrate data to the destination database (http://www.oracle.com/technology/obe/10gr2_db_vmware/develop/omwb/omwb.htm#t6) I am now stuck on step 5. “…copy the files from c:\omwb\data_files to the c:\omwb\Omwb\sqlloader_scripts\SQLServer2K\<timestamp>\Oracle directory…” I cannot find the ‘c:\omwb\data_files’ directory, in fact, I don’t have a directory called ‘data_files’ on my machine. I noticed the ‘c:\omwb\Omwb\sqlloader_scripts\SQLServer2K\<timestamp>\Oracle’ directory contains the all the 85 [tableName].ctl files (plus two other files: ‘sql_load_script’ and ‘sql_load_script.sh’). From the screenshots online, ‘c:\omwb\data_files’ seems contains files with the same name as the [tableName]. Therefore, I did a search with [tableName] but cannot find any apart from the [tableName].ctl file in the ‘c:\omwb\Omwb\sqlloader_scripts\SQLServer2K\<timestamp>\Oracle’ directory. What should I do next?
OS: windows 2003 with SP1
Oracle: 10g Release 2
SQL Server 2000
Any help would be extremely appreciated.
Helen

Helen,
Sorry, I am new here. Could you please tell me (or point me to the related documents about) how to output the Oracle model as a script?Action-> Generate Migration Scripts
And what do you mean by ‘The default conversion may have failed’? Do you mean data type mapping? I went through all the columns and tables and checked the data types in the Oracle model already. The processing for the default for a table column could have something the basic workbench default parser cannot handle.
I hope you are finding the workbench to be a productive aid to migration.
Regards,
Turloch
Oracle Migration Workbench Team

Migration from SQL Server 7.0 to Oracle 9i

Hi,
Where can i find whitepapers for migrating from SQL Server
7.0 to Oracle 9i?
Thanks in Advance

hi,
Download the Oracle Migration Workbench from this site. There is
a reference guide and online help available with the SQL Server
7.0 plugin.
Also, there is a documentation link under the Oracle Migration
Workbench section.
Regards
John

Database Migration MS Sql Server 2008 to Oracle

I have downloaded the latest updates for SQL Developer and am attempting to migrate my SQL Server 2008 DB to Oracle 11g. I get the following error when attempting to test my Sql Server connection:
Status : Failure - Test failed: I/O Error: SSO Failed: Native SSPI library not loaded. Check the java.library.path system property.
After attempting and following several posts, I have been unsuccessful in getting past this error - I have downloaded and placed in the specified directories the various .dll's suggested....
Any help is of course appreciated.

Boy do I look foolish. I told this guy that the owners of the application answer questions here... suerly he would get a reply.
Such is the problem with "free" software. No one to blame when it doesn't work.

Migrating From Window Server 2003 to Window Server 2012 for Web server deployment and Developmemt Machine is on Window Server 2008

Hi Microsoft Team,
We need your urgent advice and that is also on priority:
Issue Description: We need to migrate from
WINDOW SERVER 2003 to WINDOW SERVER 2012 while the development activity will be carried
under WINDOW SERVER 2008 as DEVELOPMENT BOX.
.NET Framework Version: 3.5 ( For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
IIS Version: 7.5 (For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
Need your quick advice Is that configuration feasible for Development and
Deployment (Web Server).
Highly appreciate your response as this will depend which product we need to buy also if you feel any showstopper or concern. Please let us know.

Hi,
As suggested by Tim, in order to get better assistance, we can ask for help in the following IIS forum.
IIS Forum
http://forums.iis.net/
In addition, regarding migrating from Windows Server 2003 to Windows Server 2012, the following blog can be referred to for more information.
Step-By-Step: Active Directory Migration from Windows Server 2003 to Windows Server 2012
http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Best regards,
Frank Shen

Migrating Netscape Directory Server 4.1 to a new server

Hi,
In the current production environment, we are using Netscape Directory Server 4.1 as the authentication with Siebel CRM system. The server hardware is old and there is a need to refresh the server. As Netscape Directory Server is the only supported/ certified LDAP with embedded functionalities in Siebel Financial Services 6.0.2.300, we are planning to upgrade only the server hardware and migrate all the user information from old server and the new one, with Netscape Directory Server 4.1 remained.
I have studied the Netscape Directory Server 4.1 Deployment Guide and gone through the migration procedures, looks like the procedures are only applicable for migrating Netscape Directory Server to a newer version. There are no specific procedures mentioned for migrating Netscape Directory Server to the new server hardware with the same directory server version.
I am seeking for detailed procedures of migrating Netscape Directory Server 4.1 to a new server hardware with the same directory server. Anyone has done this migration before? I thank you in advance for your valuable feedback.
Sincerely,
Julie

Luckily, I have the technical documentation in hand, which contains all the configuration of the current server. So I need to use "db2ldif" to export the data. I am currently testing on the migration by following these steps:
1. Install the new server.
2. Stop the Netscape Directory Server and Netscape Administration Server services in old server.
3. Copy the slapd-<server_name> folder from old server to a temp location of new server.
4. Take the old server offline.
5. Configure new server to have the exact configuration as the old server.
6. Backup the existing slapd-<server_name> folder in new server, copy the slapd-<server_name> folder from the temp location to C:\Netscape\Server4 directory of new server.
7. Start the Netscape Directory Server and Netscape Administration Server services in new server.
Will try out your suggested method. Thank you so much for your feedback.
Regards,
Julie

Help to migrate 10.6 server hardware

Similar Messages

Maybe you are looking for