Help to understand the difference

Please forgive me for my English
I learn DPM 2012
And I have a question what is the difference between File Recovery points and Express Full Back UP
1. They both work as both incremental back up? Recovery Points or works as a differential back up and Express Full Back Up as incremental back up.
What is the difference between them?
For quite a long time I can not find the answer to your question
Thanks in advance for your reply

Hi,
For file protection (volume and shares and Client) there are two job types.
A) synchronization = this brings over changed file data and applies them to the replica. These synchronizations are not recoverable from recovery tab. It controls how often you want to update the replica - the more frequent the synchronizations,
the less risk of data loss should the protected volume or server fail.
B) Recovery point - This is a VSS snapshot of the replica and represents a recovery point that you can recover data from. No data is xfered when a recovery point is made. There is a 64 snapshot limit for file data. You can make a manual recovery
point without synchronization in between scheduled recovery points so you can recover data from the last successful synchronization.
For application data that support incremental backups (exchange, SQL Db's in full recovery mode) there are two job types.
A) Synchronization - This is equivalent of an incremental backup and only brings over log changes. Each incremental synchronization is equivalent to a recovery point. Each incremental synchronization results in application log truncation which
is performed by the application (SQL / Exchange)
B) Express full - This is equivalent to FULL backup, however only brings over Database changed blocks and applies them to the replica volume then makes a snapshot Each express full backup is recoverable. Express full backups do not result
in log truncation by the application. There is a 512 snapshot limit for express full backups.
For applications that do not support incremental backups (SharePoint, SQL Db's in simple recovery mode, Hyper-V VMs) always use express full backups.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

I want to check the main diffrence in Pop up block enabled and disabled.But,i don't get any difference.Would u please help me to understand the difference using one practical example of website

I want to check the main diffrence in Pop up block enabled and disabled.But,i don't get any difference.Would u please help me to understand the difference using one practical example of website

Here's two popup test sites.
http://www.kephyr.com/popupkillertest/test/index.html
http://www.popuptest.com/

I still don't totally understand the difference on my iPhone between PhotoStream (with iCloud icon), Photos (the icon) and Albums and Camera Roll (under Photos icon) and and Camera Roll (under Camera icon). I want to delete photos from my iPhone 4.

I don’t understand the difference on my iPhone between PhotoStream (with iCloud icon), Photos (the icon) and Albums and Camera Roll (under Photos icon) and and Camera Roll (under Camera icon). They seem to be more or less the same thing, but deleting photos in one place does not delete them elsewhere.
When I tried to import from my camera to my iMac computer the computer would not recognized 900 of the 920 photos on the camera so I had to (successfully) use the Image Capture application to import them.
I want to delete photos from my iPhone 4 in order to free up storage (I only have 8GB.) But in synching I do not want to delete any images from my iPhoto on my computer.
Is there a way that I can Delete All under Edit in either Photos or Camera on my iPhone and check about 20 ijmages to remain on the iPhone? I could find no command to Select All and then uncheck the 20 photos I want to keep.
I have the 8GB iPhone and the iMac with OS 10.9.2 and iPhoto '09 Version 8.1.2.
Help!

I have Version 6.1.3 because the clogged storage will not allow me to upload Version 7.1. Catch 22. This is basically a storage issue, I believe. I cannot delete enough stuff on my iPhone to allow me to either back up or upload the new OS 7. I am unwilling to pay for more storage in iCloud, so I want to delete stuff I don't need. But I haven't yet figured out how to successfully do that. I synch my phone and computer. I want to delete mail on the Mail app and photos and still keep my photos on my computer on iPhoto, but not on my phone. I seem unable to do that. Any advice?

Error Posting IDOC: need help in understanding the following error

Hi ALL
Can you please, help me understand the following error encountered while the message was trying to post a IDOC.
where SAP_050 is the RFC destination created to post IDOCs
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>FM NLS_GET_LANGU_CP_TAB: Could not determine code page with SAP_050 Operation successfully executed FM NLS_GET_LANGU_CP_TAB</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: FM NLS_GET_LANGU_CP_TAB: Could not determine code page with SAP_050 Operation successfully executed FM NLS_GET_LANGU_CP_TAB</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Your help is greatly appreciated.............Thank you!

Hi Patrick,
Check the authorizations assigned to the user which you used in the RFC destinations, If there is no enough authorizations then it is not possible to post the idocs.
Also Refer this Note 747322
Regards,
Prakash

Hello, we have both Creative Cloud and Creative Cloud for teams. Can you help me with the difference and if i need to have both?

Hello, we have both Creative Cloud membership and Creative Cloud for team. Can you help me with the difference and if i need to have both? We have 9 employees that are using it. Just not sure if i'm paying for something i don't need.
Thank you

Please refer to Creative Cloud Help | Creative Cloud / Common Questions
CC is for retail use with 20 GB of storage space, CCT is where number of seats are purchased & assigned by one program admin where each seat gets 100GB of storage space.
You can not have both the CC & team in one account as it will only provide you added storage space of 120 GB but you can activate the CC any of them or either of them twice as CC is based on Adobe ID.
Regards
Rajshree

Can you help me understand the use of the word POSITION in TR and CFM?

Hi,
I am trying to have a view of typical BI reports in TR and TM/CFM so through my research I came to the following link:.
http://help.sap.com/saphelp_nw2004s/helpdata/en/62/08193c38f98e1ce10000000a11405a/frameset.htm
My problem on this link and other postings on this site seem to be the same. Can you help me understand the use of the word POSITIONS in these context:
1. Our client has asked for financial transaction reports in BW, such as position of Borrowings, Investments and Hedge Operations (TM data).
2. I have a requirement on, some reports related to Money Market (Fixed Term Deposits, Deposits at Notice) something on FSCM-Treasury and Risk Manager. These reports will be similar to that of Loans, i.e. Position statement, flow statement, etc.
3. The set of position values for a single position or a limited amount of positions can be reported by transactions TPM12 and TPM13 in R3.
4. 0CFM_C10 (Financial Positions Cube)
Do you have some simple report outputs to help clarify how the word POSITION is used in such environments?
Thanks
Edited by: AmandaBaah on Feb 15, 2010 4:39 PM

If I future buy 10 shares in company at £1 per share - at the end of the day my potential value is £10
The next day the shares drop tp £0.9 per share - I have a negative position - my shares are only worth £9
I haven;t bought them yet - but I have a negative position - ie if things stayed as they are - I am going to realise (ie end up with) a loss
Now you can use this for loans and foreign exchange banks as well...

Need help for understanding the behaviour of these 2 queries....

Hi,
I need your help for understanding the behaviour of following two queries.
The requirement is to repeat the values of the column in a table random no of times.
Eg. A table xyz is like -
create table xyz as
select 'A' || rownum my_col
from all_objects
where rownum < 6;
my_col
A1
A2
A3
A4
A5
I want to repeat each of these values (A1, A2,...A5) multiple times - randomly decide. I have written the following query..
with x as (select my_col, trunc(dbms_random.value(1,6)) repeat from xyz),
y as (select level lvl from dual connect by level < 6)
select my_col, lvl
from x, y
where lvl <= repeat
order by my_col, lvl
It gives output like
my_col lvl
A1     1
A1     3
A1     5
A2     1
A2     3
A2     5
A3     1
A3     3
A3     5
A4     1
A4     3
A4     5
A5     1
A5     3
A5     5
Here in the output, I am not getting rows like
A1     2
A1     4
A2     2
A2     4
Also, it has generated the same set of records for all the values (A1, A2,...,A5).
Now, if I store the randomly-decided value in the table like ---
create table xyz as
select 'A' || rownum my_col, trunc(dbms_random.value(1,6)) repeat
from all_objects
where rownum < 6;
my_col repeat
A1     4
A2     1
A3     5
A4     2
A5     2
And then run the query,
with x as (select my_col, repeat from xyz),
y as (select level lvl from dual connect by level < 6)
select my_col, lvl
from x, y
where lvl <= repeat
order by my_col, lvl
I will get the output, exactly what I want ---
my_col ....lvl
A1     1
A1     2
A1     3
A1     4
A2     1
A3     1
A3     2
A3     3
A3     4
A3     5
A4     1
A4     2
A5     1
A5     2
Why the first approach do not generate such output?
How can I get such a result without storing the repeat values?

If I've understood your requirement, the below will achieve it:
SQL> create table test(test varchar2(10));
Table created.
SQL> insert into test values('&test');
Enter value for test: bob
old   1: insert into test values('&test')
new   1: insert into test values('bob')
1 row created.
SQL> insert into test values('&test');
Enter value for test: terry
old   1: insert into test values('&test')
new   1: insert into test values('terry')
1 row created.
SQL> insert into test values('&test');
Enter value for test: steve
old   1: insert into test values('&test')
new   1: insert into test values('steve')
1 row created.
SQL> insert into test values('&test');
Enter value for test: roger
old   1: insert into test values('&test')
new   1: insert into test values('roger')
1 row created.
SQL> commit;
Commit complete.
SQL> select lpad(test,(ceil(dbms_random.value*10))*length(test),test) from test;
LPAD(TEST,(CEIL(DBMS_RANDOM.VALUE*10))*LENGTH(TEST),TEST)
bobbobbobbobbobbobbobbobbobbob
terryterry
stevestevesteve
rogerrogerrogerrogerrogerrogerrogerrogerrogerYou can alter the value of 10 in the SQL if you want the potential for a higher number of names.
Andy

Need help in understanding the error ORA-01843: not a valid month - ECX_ACT

Hello All,
We need help in understanding the Transaction Monitor -> Processing Message (error "ORA-01843: not a valid month - ECX_ACTIONS.GET_CONVERTED_DATE").
And how to enable the log for Transaction Monitor -> Processing Logfile.
Actually we are trying to import the Purchase Order XML (OAG) into eBusiness Suite via BPEL Process Manager using the Oracle Applications Adapter. The process is working fine with expected payload until it reaches the XML Gateway Transaction Monitor, where we are getting this error.
thanks
muthu.

Hello All,
We need help in understanding the Transaction Monitor -> Processing Message (error "ORA-01843: not a valid month - ECX_ACTIONS.GET_CONVERTED_DATE").
And how to enable the log for Transaction Monitor -> Processing Logfile.
Actually we are trying to import the Purchase Order XML (OAG) into eBusiness Suite via BPEL Process Manager using the Oracle Applications Adapter. The process is working fine with expected payload until it reaches the XML Gateway Transaction Monitor, where we are getting this error.
thanks
muthu.

Want to understand the Difference between Attempt sign in and sign in in Unity Connection

I would like to understand the difference between Attempt sign in and sign in in Unity Connection.
If I do a direct routing rule to attempt sign in and another routing rule directly to sign in, what would be the difference for the caller (inside caller with or without voicemail and also outside caller with or without voicemail)? Thank you! Lise

Attempt Sign-In—Sends the call to the user sign in conversation, if the calling number belongs to a user. The calling number is used as the ID. If the call is not from a user, the next rule in the routing table is applied to the call information.
Sign-In—Sends the call to the user sign in conversation, which prompts the caller to enter an ID.

I understand the difference between imessage and SMS but when I text a friend who always got iMessages in the past, everything I send her is SMS (green) even if we both have wifi. She has an iphone.

I understand the difference between imessage and SMS but when I text a friend who used to receive imessages (blue), my phone shows I'm sending her SMS (green) messages. No longer are they blue. She has an iphone and this happens when we are both connected to wifi. We have both recently updated to ios7. Thanks!

Turn off iMessage
Reset Network Settings
Turn iMessage back on

I need help in understanding the customization of Landscape in R/3.

I need help in understanding the customization of Landscape in R/3. Setup of SAP Landscape from an SAP SD point of view. Being as SAP SD consultant what would be my role in customizing the Landscape server. Help needed. Thx

Hi,
In a standard SAP project implementation, the 3 standard transport procedures are:
Development System (DEV) --> QA System (QAS) --> Production System (PRD)
In the above structure, the Training Client (TRN) could be made from the copy of PRD (after when real-time master data has been available) or from QA system (where configuration has been tested in DEV client, and the master data is uploaded manually for training purposes)
Sandbox (standalone): This can be refreshed with Golden Client to reflect the latest configuration performed to facilitate the development/testing purposes.
-Development (DEV): Where all system configurations and development activities are carried out.
-Quality Assurance (QAS): Where functional testing is carried out. The System Integration Testing (carried out by the -Development Team) and the User Acceptance Testing (carried out by XXX appointed personnel) is carried out in this server.
-Training (TRN): End Users are trained on this server.
-Production (PRD): After the System is commissioned all data entry and administrative functions will be carried out in this server.
This is by far the standard landscape architecture that is adopted and practiced in most implementations.
Hope the above helps.
Thanks.

Understanding the difference

hi folks, would someone please make me understand the difference between the PeopleSoft Application Server, TUXEDO and PSADMIN interface? Are PeopleSoft Application Server and TUXEDO the same?

I did not say Tuxedo was doing everything. Only the AppServer <=> database connection pool. The AppServer on his side is in between Tuxedo (db) and Web (within Jolt port) and do all the business stuff from the Peoplesoft librairies.
Application server is also used to connect client through WSL port from AppDesigner in 3rd tier mode.
Here's the definition of Tuxedo :
+"PeopleSoft uses *Oracle Tuxedo, a middleware framework and transaction monitor, to manage transactions between the application server and the database.* PeopleSoft also uses Oracle Jolt, a Java API and class library, to facilitate communication between Tuxedo running on the application server and the PeopleSoft software running on the web server. Tuxedo and Jolt are required elements of the PeopleSoft application server.
Note. Tuxedo doesn’t actually perform processing on the application server; it schedules PeopleSoft server processes to perform the transactions."+
Nicolas.

Please help to understand the Service parts planning,we r tring to do poc for project

Hi
Please help to understand the Service parts planning,we r tring to do poc for project
1)How the sales history flow from cube to Interactive forecasting screen(like dp in apo there is no Planning area to store data and no load planning area from cube,so please let me know how it will load data?)
2)How the Final demand will flow to DRP for further planning?
3)What is the exact purpose of BOD?
4)What is the leading indicator forecasting and the purpose?
5)Where data will store in SPP (forecasting and other data like liveache in dp)?
6)Product interchangeability and use?
6)Can you please forward the process document to understand the flow as i am not able understand the help document
Thanks for advance help
Regards
kkk

Hi,
Please check Service Part Supply Plan - Enterprise Services in SAP Advanced Planning and Optimization - SAP Library
BR

Please help to understand the Service parts planning doubts/clarifications

Please help to understand the Service parts planning,we r tring to do poc for project
1)How the sales history flow from cube to Interactive forecasting screen(in spp,like dp in apo there is no Planning area to store data and no load planning area from cube,so please let me know how it will sales history load data?)
2)Does Sales History of the child location will agregated to entry level ? if so like that we need to run statistical forecats at entry location?
3)where we will create the from and To Product(eg:Maping Product A to Product B ) to do the Relignment /Phase in profile/Interchangebility
4)What is the leading indicator forecasting and the purpose?
5)Where data will store in SPP (forecasting and other data like liveache in dp)? Mpos and Planning area is not there in SPP?
6)Can you please forward the process document to understand the flow as i am not able understand completely by the help document
Thanks for advance help
Regards
KKK

Hi,
Please check Service Parts Planning - Enterprise Services in SAP Advanced Planning and Optimization - SAP Library
BR

I'm trying to understand the difference between Photoshop Elements and Lightroom software.

Does one have things the other does not?

Hi,
Lightroom is to manage photos and produce derivative images without ever modifying an original file. Its processing functionality has a narrow feature-set covering the most common needs of professional photographers whereas Elements is a simpler yet powerful photo manipulation tool. Elements is designed to satisfy the needs of photo enthusiasts who like to manipulate images.
You can also go through the thread to understand the basic difference between PSE and Lightroom.
Check if this helps.
Thanks,
Swapnil

Help to understand the difference

Similar Messages

Maybe you are looking for