Help! Torch broken down from nowhere. App Error 602.

So today my phone was working fine as it always has, I decided to remove some programs I don't need. I removed Google Talk and AOL Messenger and pressed yes to reboot as it needed to. Phone powered off, powered back on again and did the black Blackberry screen with scrolling white loading bar. It gets to the end of it and instead of booting my phone it presents me with a white screen with App Error 602 on it with Reset underneath, I press Reset and the phone powers off, on, black Blackberry screen with scrolling white loading bar and then goes back to App Error 602, Reset. 
I cannot get it to start, I need it working urgently, the only Blackberry Support page suggests they don't know what the problem is, and advises me to reset to software on the phone. The only problem is BDM 4.7 will not connect to the device because it can't boot!
It comes up with Blackberry Torch 9800 but every single option is greyed out. In the bottom right it displays 'Connecting' with a circling green symbol but nothing ever happens. Please can anyone be of assistance.
Regards.
Blackberry Torch 9800
Carrier o2 UK.

I would recommend you download and install BBSAK and do a wipe on the device and reload the software.
BBSAK Download here.  http://www.bbsak.org/download.php
Device operating system releases are "released" by specific carriers once they have certified and trained their support techs, but still, you are able to load to any carrier's same model by following the instructions below.
See the link below, for the download and simple installation instructions.
https://www.blackberry.com/Downloads/entry.do?code=F466E84E4D899DDA09BE2BF2D3D7ECE3
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • I dropped my iphone vertically on the ground. The screen is normal when it is locked. but when unlocked, it is broken down from the clock. Can it be fixed and is it under the warranty conditions? If not how much is the price to change the screen?Thanks

    I dropped my iphone vertically on the ground.The screen works when it is locked.When unlocked, it's broken down from the clock.Can it be fixed and is it under warranty conditions?If not how much is the price to change the screen?Thanks

    User damage is not covered by warranty unless you have Applecare +
    assuming you do not,  the out of warranty exchange price for an iPhone 4 is $149,exchange at an Apple Store genius bar
    iPhone 4 are not repaired they are exchanged

  • App Error 602 & "Uncaught exception: Application net_rim_bb_messaging_app(144) is not responding; process terminated"

    Hi,
    I have spent a whole and very frustrating day trying to solve the following problem and in exasperation I resort to a posting here. Note no changes had been made to the phone prior to the start of the problem.
    My Blackberry 9800 Torch freezes on power-up. It can only be ‘unfrozen’ by taking out the battery or, if left alone, after many minutes it comes up with the white screen, ‘App Error 602' and ‘Reset’ which is highlighted. Resetting has the same effect as taking out the battery. After each restart, it goes through the usual security and time checks and then freezes again. However, on rare occasions I got the message “Uncaught exception: Application net_rim_bb_messaging_app(144) is not responding; process terminated”.
    Soon after the restart, after the Security Software Verification and on confirming the time/date, there is a very small window of opportunity (literally a couple of seconds) to access the phone. After much trial and error, I discovered that (in Manage Connections) by disabling the Mobile Network and WiFi - effectively putting it into ‘aeroplane mode’ - the device would work, without any problem and indefinitely. Except, of course, I couldn’t access the phone network nor the internet, which isn’t helpful(!).
    I have taken this opportunity to do a full back-up on to my PC, through BlackBerry Desktop Software (though I’m not sure this backs up downloaded Apps??). Separately, I've also copied all the subdirectories from the phone’s memory and media card on to the PC, retaining their correct structures (but presumably also copying the corruption causing the problem?).
    Any ideas???
    - thanks in advance!

    The method you are attempting is the automatic method...sometimes it just doesn't work, and you must take control. The simplest way is to, on a PC (you cannot do this on MAC):
    1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
    2) Uninstall, from your PC, any BB OS packages
    3) Make sure you have the BB Desktop Software already installed
    http://us.blackberry.com/software/desktop.html
    4) Download and install, to your PC, the BB OS package you desire:
    http://us.blackberry.com/support/downloads/download_sites.jsp
    It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
    5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
    C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
    6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
    If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
    If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
    KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • App error 602 stuck in loop

    My Curve 9360 has been freezing alot recently so I decided to check for software updates - there were plenty - but now I'm stuck.
    I've completed the backup and install process but the phone won't reboot. Each time it tries I get "App Error 602". I've tried the sofy and hard reset but I'm stuck in the cycle and my phone will not turn on!!
    Help please!!
    Solved!
    Go to Solution.

    You could try Safe Mode:
    KB17877 How to start a BlackBerry smartphone in Safe Mode
    It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, if it will run stable, you might be able to conduct other activities.
    Otherwise, you may also need the use of these tricks:
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB27956 How to recover a BlackBerry smartphone from any state
    http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • App error 602 during update

    hi, 
    I was updating my BB 9350 7.1 bundle 921 with the desktop software,  after the download and the installation was done; i recieve an "app error 602" message during the rebooting. now my phone does not restart at all and i have tried and triend several times. the desktop softaware does not connet to it. what can i do?
    Celeo Osorio

    Hi Celeoosorio...
    If you want to solve this problem on your Blackberry ... You must download the BBASK.
    Also you have the DM (desktop manager) for Windows PC
    Have and download the OS to your Blackberry in this case the 9350
    BlackBerry Handheld Software v7.1.0.2364 (Multilanguage) by Bluegrass Cellular
    Package Version: 7.1.0.2364
    Consisting of:
    Applications: 7.1.0.861
    Software Platform: 5.1.0.606
    File name: 9350_9370AMEA_PBr7.1.0_rel2364_PL5.1.0.606_A7.1.0.861_Bluegrass_Cellular.exe
    File size: 210.35MB
    You should apply wipe + factory reset and Wipe= Error 507
    Luego tu proceeds to install OS via Loader 
    How to Install or Upgrade to a New RIM BlackBerry Operating System (OS) with AppLoader
    Source: Crackberry
    Regards...
    Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
    Accept as Solution to ** Comments **
    @gutijose14
    BBM Channels  PIN: C0007093A
    Do not forget to give LIKE    Those people who help you and advise you about your doubts.  if the review has been SOLVED** # 4LL  #ÉliteRoad  Make a backup of your BlackBerry
    BlackBerry Protect and  BlackBerry Link constantly.  #ichooseBlackBerry10 Gutijose14 Forums Veteran I

  • Device keep turning plain and displaying App error 602

    Dear Sirs,
    My BlackBerry  Curve 9300 is not functioning properly any more after i made BlackBerry ID on my PC to connect the device with the PC.  The device turning plain and displaying App error 602
    Could you please help me
    Thank You in advance
    Abdi Halim Musa

    Hi Abdi Halim
    This Knowledge Based will guide you to solve that problem: "App Error 602" appears on the BlackBerry smartphone or "App Error 602" appears on the BlackBerry smartphone running BlackBerry 7
    Good luck.
    • Click Likes to appreciate those who helps you
    • If your issue solved, mark the best post in your thread as Solution

  • HELP: No enough space to install app error

    Hi,
    am facing this problem from two days. when am trying to install app from amazon or BB app world, my phone is showing "No enough space to install app, please delete some apps"  error. i have almost 8 GB free space left in my mobile. Please help.
    Solved!
    Go to Solution.

    On your Classic, do a reboot or restart and try the install again:
    Restart: With the BlackBerry device POWERED ON, press and hold the upper edge power button about 20-30 seconds, ignore the 3-2-1 timer and hold until the screen goes black and you see the red LED.
    or
    Reboot: With the BlackBerry device POWERED ON, using the side edge volume keys, press and hold down both of the Up and Down volume keys for about 20 seconds, ignoring the initial screenshot message... the screen will go black and reboot.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • **HELP** itunes shuts down when clicking apps key

    Hello,
    I need help with my itunes, since updating my software last week to IOS 7, I lost the majority of my apps off my phone, so when I now connect my iphone to itunes and click on the apps key to update the phone, itunes compleyely shuts down unexpectedly.
    i use an iphone 4 and have no idea why this is happening?

    Hey chaimoy,
    It seems like you may be experiencing an unexpected quit from iTunes when importing a file into the iTunes library. I have an article for you that addresses this circumstance, and it can be found below:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
    http://support.apple.com/en-us/HT203206
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Targeting a help page within JavaHelp from the app?

    I'm considering implementing JavaHelp in my app.
    My big question...I want to provide various points in the application that jump straight to the relevant parts in the help.
    Does JavaHelp support that?
    For instance, on a given dialog, I'm going to have a little HELP icon in the upper right. When someone clicks on that, I want to jump straight to the help page regarding that dialog, rather than bringing up help and requiring the user to navigate to it.

    And the answer is "absolutely"!

  • Recovered from an app error 205 (!), but no longer have appworld on my phone so can't install facebook etc

    I have followed the link previously suggested (ID: KB10144) and have amazingly brought my phone back to life.  However although the desktop software says Blackberry appworld is installed, it is not on my phone.  Any help would be gratefully received.
    Thank you

    The 'open' button only show after you've installed it on your phone, the cloud symbol imdicates that the app is only in the cloud - if you tap on the cloud icon it should download onto your phone.

  • App Error 602

    Hi 
    I have tried to upgrade my software on my phone. However after trying to re-boot, an error message is dsiplaying on my screen(blackberry screen). How can i restore my phone to work normally.
    I use a windows 8 laptop. please help me. Thanks you

    Hi and Welcome to the Community!
    Here is the list of troubleshooting articles...hopefully something will be useful:
    http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB28457 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone due to administrative permissions
    KB28458 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when user account control is enabled
    KB28459 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when a full version of Roxio® Media Manager is installed 
    KB28456 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when USB selective suspend setting is enabled
    KB28444 The BlackBerry smartphone is not detected by BlackBerry Desktop Software when connected by USB to a USB hub or a docking station
    KB28443 BlackBerry Desktop Software cannot detect the BlackBerry smartphone when it is connected via USB
    KB02640 Troubleshooting USB connections
    KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
    KB00125BlackBerry Desktop Software cannot detect the BlackBerry smartphone
    KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
    KB00019 No PIN displayed in BlackBerry Desktop Redirector
    KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
    KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
    KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
    KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
    http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...
    Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
    Also check on conflicting software...it has been reported that the software package NTI Shadow&Ninja can cause a conflict; removing them and reinstalling the BB desktop software allows it to install correctly.
    Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these. Also apologies if any are not presently available...RIM takes them up and down at will as they revise things.
    Hopefully something there is helpful!
    You also could perhaps try the steps in this thread:
    http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
    It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
    Good luck!
    VIA | sdgardne 
    http://supportforums.blackberry.com/t5/BlackBerry-Storm/Desktop-Manager-not-recognizing-device-conne...
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • Web service Invocation from ADF mobile app errors

    Mobile App Gurus,
    The webservice when invoked from ADF web app is working fine but, when invoked from Mobile APP errors in emulator with as below...
    D/oracle.idm.mobile.OMAuthenticationServiceManager_onPostExecute( 1096): Authentication serivce is oracle.idm.mobile.SSOAuthenticationService
    D/oracle.idm.mobile.OMAuthenticationServiceManager_onPostExecute( 1096): Authentication context status is IN_PROGRESS
    D/oracle.idm.mobile.OMAuthenticationServiceManager_retrieveAuthenticationContext
    ( 1096): Authentication context for the key appsnet5login.sysadmin retrieved from the credential store is : null
    D/oracle.idm.mobile.OMAuthenticationServiceManager_onPostExecute( 1096): Authentication serivce is oracle.idm.mobile.BasicAuthenticationService
    D/oracle.idm.mobile.OMAuthenticationServiceManager_onPostExecute( 1096): Authentication context status is IN_PROGRESS
    D/oracle.idm.mobile.OMAuthenticationServiceManager_doInBackground( 1096): Invalid Authentication URL.
    Please can you let me know if I am missing some step in ADF Mobile App framework.
    Thanks,
    Shreedhar
    Edited by: sh**** on Apr 22, 2013 5:11 AM
    Edited by: sh**** on Apr 22, 2013 6:50 AM

    I don't know if you fixed it already by this time or not. But here is my findings anyway, to be able to inject the security header correctly in any SOA Gateway service, you need to have your Mobile Application Secured, meaning that there is a prompt for username/password when you open it.
    Then you will have to make a Proxy service for the webservice you are using from apps. And you must create it with a SOAP Handler also and write below sample code in the handler to inject the security header in the SOAP call. At last, you are going to deploy this proxy service to your Application Server.
    These steps were taken on a Glassfish server not Weblogic. I think there is an easy way for this if you are using Weblogic..
    Sample handler is below:
    package com.mobile.xxsoap;
    import java.util.HashSet;
    import java.util.Set;
    import javax.xml.namespace.QName;
    import javax.xml.soap.Name;
    import javax.xml.soap.SOAPElement;
    import javax.xml.soap.SOAPEnvelope;
    import javax.xml.soap.SOAPFactory;
    import javax.xml.soap.SOAPHeader;
    import javax.xml.ws.handler.MessageContext;
    import javax.xml.ws.handler.soap.SOAPHandler;
    import javax.xml.ws.handler.soap.SOAPMessageContext;
    public class CustomSOAPHandler implements SOAPHandler<SOAPMessageContext> {
        private static final String AUTH_PREFIX = "wsse";
        private static final String AUTH_NS =
            "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd";
        public boolean handleMessage(SOAPMessageContext context) {
            try {
                SOAPEnvelope envelope = context.getMessage().getSOAPPart().getEnvelope();
                SOAPFactory soapFactory = SOAPFactory.newInstance();
                SOAPElement wsSecHeaderElm = soapFactory.createElement("Security", AUTH_PREFIX, AUTH_NS);   
                SOAPElement userNameTokenElm = soapFactory.createElement("UsernameToken", AUTH_PREFIX, AUTH_NS);
                SOAPElement userNameElm = soapFactory.createElement("Username", AUTH_PREFIX, AUTH_NS);
                userNameElm.addTextNode("redsam");
                SOAPElement passwdElm = soapFactory.createElement("Password", AUTH_PREFIX, AUTH_NS);
                Name passwdTypeAttr = soapFactory.createName("Type");
                passwdElm.addAttribute(passwdTypeAttr,
                                       "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText");
                passwdElm.addTextNode("123456");
                userNameTokenElm.addChildElement(userNameElm);
                userNameTokenElm.addChildElement(passwdElm);
                wsSecHeaderElm.addChildElement(userNameTokenElm);
            } catch (Throwable e) {
                e.printStackTrace();
            return true;
        public Set<QName> getHeaders() {
            return new HashSet<QName>();
        public boolean handleFault(SOAPMessageContext messageContext) {
            return true;
        public void close(MessageContext context) {
    I hope it is clear now...
    Regards,
    Mohamed

  • What does 'App Error 205 'mean ?

    My blackberry curve 8520 has stop working while trying to load my CD disc on my computer, now my phone says App Error 205 and Reset on another line and now my phone will not work, can anyone help?

    Read in regards to App Error 205:
    KB17024 "Application Error 205" appears on the BlackBerry smartphone
    KB19996 "App Error 205 Reset" appears on the BlackBerry smartphone
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Error 602 on the white wall paper

    hello there, i do have a torch 9860, the phone stared by not booting. then after the settings were defaualted, its now showing E602 on the white wallpaper. what can i do to repair it and to make sure it never happens again

    Hello kagwah
    Welcome to BlackBerry Support Forums
    Try this Knowledge Base to recover your device from this error :
     KB10144  : How to force the detection of the BlackBerry smartphone using Application Loader
    No one can specifically say the cause of this error , if this error appeared after installing any application then you  need to be careful and don't install any unknown app , but sometime those error may appear without any reason , those are Java errors in which a user can't do anything .So the most important thing is that we should do a regular backup of our device , as in your situation , while following this KB to recover your device  you will loose all data within your device. I hope you have a previous backup from which you can restore . 
    Additional Information :
    KB23950 :  "App Error 602" appears on the BlackBerry smartphone.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Application Error 602

    Hi there,
    I have been using a BlackBerry Curve 9220 since a year now. I earlier had a problem with my BBM when i upgraded to the recent software and faced Application Error 603. After a while the issue subsided but now it has come up with Application Error 602. I have deleted my BBM application now but still the problem is constant. I feel terrible without my BlackBerry.
    Regards,
    Ralph Poe

    Hello,
    It depends on your OS level...refer:
    KB29237 "App Error 602" appears on the BlackBerry smartphone running BlackBerry 7
    KB23950 "App Error 602" appears on the BlackBerry smartphone
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • Problem downloading itunes 10 on windows vista.

    i keep getting the this message: An error occurred during the installation of assembly 'microsoft.vc80.CRT', Public Key Token="1fc8b3b9a1e18e3b", Type="Win32", Version="8.0.50727.762" HRESULT: 0x8007054F i've gone on basically every similar support b

  • PHOTO STREAM KEEPS SHOWING LOADING

    Hi Everyone.. I have removed most of the pics from camera roll on iPhone and iPad, and made separate photo streams of my pictures, more like albums. For e.g. each trip photos is a photo stream. This way I reduced the space usage on iPhone and iPad. H

  • Zen touch - software for finding duplicates in libr

    After buying my player and putting 800 tracks on there so far I have found that I have a lot of duplicates of songs. Some are ones I want (album version v li've version of songs) but sometimes I have exactly the same recording a few times. I mean who

  • Interpretation of an AWR

    I would need some help with the followinf AWR part of the report, I am experiencing 100% CPU usage on my Oracle 10gR2. Event Waits Time (s) (ms) Time Wait Class CPU time 17,000 70.0 db file sequential read 1,500,000 7,000 5 27.9 User I/O Backup: writ

  • Convert to mp3 error --help!

    I have aif and aifc files in my iTunes library that I created in a voice recording app on my iPod Touch. I want to convert them to mp3. However, when I right-click the aif/aifc files in the iTunes library and choose "Create mp3 version" it gives me t