Help - Total record count

I want to print total no of records in the trailer section of report.
Can somebody give me a suggestion on this
Mathew

Define summay column with function as 'Count'. Source is your key field in the report
Try this.
KM

Similar Messages

Record count per page , total record count per report in BI Publisher

hi,
In Oracle BI Publisher tool , can you please tell me how to display total record count of a report ? as well as how to display record count per page ?
Thanks for your help
Regards
Gayathri

check inbox. forwarded the updated template

How to get a total record count before grouping?

I need to group a report on a formula that does roughly the following:
[record count] / ( [total record count] / 20 )
What this acheives is to label each record with a number of 1 - 20 which I want to group on. Getting this figure is the easy part, what is not working is the fact that I cannot group from a formula that is calculated after grouping. I overcame a portion of this by using "Whilereadingrecords" (rather than "count", running totals, or while printing records) to acheive a record count.
I can't figure out how to get a total record count done before grouping. Is there a way to do this with "WhileReadingRecords"?? Is this even possible?
Thanks
John

Hi John,
The order of how Crystal does things dictates the order of which features you can use. Crystal has a two pass method. In the first pass it does things like passing the query, grouping, summarizing. In the second pass it does formulas, formatting, etc.
Unfortunately Crystal does the Grouping before summarizing so what you want to do can't be done in Crystal. The best way to get around this to either create a SQL Command or view/stored procedure that will do the summarizing for you. Then in the report you can use it.
Hope this helps,
Brian

Viewer TOTAL record count display CRViewer9

Post Author: niblick
CA Forum: General
A application written in a previous version of Crystal Reports (7 or 8 ?) displays the TOTAL record count in the viewer (not in the report). I had to upgrade the reports to version 9 (RDC - CRViewer9) and when I preview the report there is no TOTAL record count in the viewer. How do I enable this in Crystal Reports 9?
Thanks

check inbox. forwarded the updated template

How to get the total record count for the report

Hi,
How can I get count of the total records shown in the report. When we set the report attributes, we have an option "Set Pagination from X to Y of Z"
Does anyone know how can I get the Z value from APEX variables.
I know we can use that query and get the count but I just want to know how we can use APEX Variables effectively.
Thanks in advance.

You write a loop, something like this:
Go_block('B1');
If not form_success then
Raise Form_Trigger_failure;
End if;
First_Record;
If not form_success then
Raise Form_Trigger_failure;
End if;
Loop
If :system.record_status in('CHANGED','INSERT') then
-- modify the record here--
End if;
Exit when :System.Last_Record = 'TRUE';
Next_Record;
End Loop;
First_Record;But be very careful-- If your block can fetch a large number of rows, (over 100), this loop can take a long time, and you should not use this method. The loop will continue fetching more rows from the database until all rows satisfying the query are retrieved.

How to get the total record count in ODI

Hi
I have the interface the are file to DB.
The format is like this..
HEADER
DETAIL
TRAILER
Now will write the contains of file to DB,
But i have to insert the total count ie numberof record written from file to DB in my Trailer record.
can you tell me how can i get the total count of records in file and write it to trailer?
Also, I want the interface to rollback the data if something fails will loading the data from file., ie. if there are 100 records in file and 50 got transfer and something fails i want to rollabck the 50 records from DB.???
Thanks :)

Hi
You can design a flow for Full load flow and incremental flow from flat file to Table.
Create a table at target database like.. (create table with last_execution and palce the V_FULL_LOAD value and LAST_EXECUTION_DT columns in last_execution table)
Add faltfile as table in model, create a variable as V_FULL_LOAD and make sure that the default values is 01-01-1900
Create one more variable like V_LAST_EXECUTION_DATE (in this variable write a case statement that if V_FULL_LOAD value is 'Y" then full load should happen and same time you should check that V_FULL_LOAD column is balnk then write insert statment else write update statement to update last_execution_dt column, similar for 'N')
please provide your *personal mail ID*, i will send a doc file realted to your query.
we have to tables present in work repository (SNP_STEP and STEP_LOG tables) using tables we can get how many records are inserted/updated and we can find how many records are not transfer and gor error.
Thanks
Phani

Record Count Issue in Search page ?

Hi Friends
I am trying to display record count on Search page and I have the following code in
The table has total of 62 Rows
AM : for testing purpose, i am printing in log
public void getISAGRecordCount()
OAViewObject vo = (OAViewObject)getXXG2_ELIM_ISAGSView1(); //getXXG2ISAGSearchVO1();
int fetchedRowCount = 0;
vo.setMaxFetchSize(-1);
vo.executeQuery();
fetchedRowCount = vo.getRowCount();
System.out.println("RowCount: "+ fetchedRowCount);
IN PFR of CO: I am calling by this way
am.invokeMethod("getISAGRecordCount");
the Issue is
for the first time, when i search Based on search criteria, I know it should dispaly 10 records but in the Log file i see the total Record Count of the Table Ex; 62
When i do the serach for the second time, based on search criteria, I know it should display 20 records, but the log file has 10 records ( previous search results)
If I do the search for 3rd time, I see 2nd search results in log
Any help in this issue, how to fix this?
Thanks
Ravi

Hi,
Please donot use getRowCount(), use getFetchedRowCount() and remove setMaxFetchSize(-1).
Hope it will resolve your issue.
Just for understanding of the concept:
getFetchedRowCount() returns the number of rows cached in the view object -- including programmatically inserted rows.
The getRowCount() implicitly execute a query against the database (if a query has not been executed yet)
Regards,
Reetesh Sharma

Records count in Receiver File Adapter

Hi All,
I have a scenario IODC to File. The requirement is to get the total record count in the Trailer record of the Target File .Please help.
Regards,
Kevin

Hello,
The requirement is to get the total record count in the Trailer record of the Target File
In your XML, decide which IDOC field you get your records from and then do a similar mapping
IDOC field -> removeContext -> count -> TrailerRecordfield
Hope this helps,
Mark

Total records not shown in bottom panel

Hi all,
I am running Forms 10g. When my forms runs, the total record count does not shown in the bottom panel but a question mark instead. For example it would show 1/?
Could you tell me why it would do that?
Thank you.

This is because forms do not know, how many records will be retrieved from the database.
If you go to the last record, forms will show you how many records are in your block.
You can set the Query All Records block-property to yes to see immediately how many records there,
but if there are a lot of records to fetch, it might results in a long query time.

UDF for Total records

Hi
I have a scenario where sender is file. In file there is a field Total records.
I need to validate Total records field with the total records in the file using UDF..
Can any suggest me the how to write the cod efor this..
venkat

Hi Venkatesh,
In your source structure should Detail Records count equal to Total Record Count?
if yes,just create Context UDF and pass the following 2 inputs
1. DetailRecord -> RemoveContext
2. TotalRecord
and inside UDF write java code for validation
suppose if your inputs are a[](DetailRecord) and b[](TotalRecord)
int scnt = a.length;
int tcnt = Integer.parseInt(b[0]);
if( scnt != tcnt)
//write code to trigger an alert(from the following weblog)
To Trigger alert from UDF just go through the following weblog
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Cheers,
Jag

Please help! Invalid node structure and invalid record count

My MacBook Pro is about 6.5 years old. I upgraded to Snow Leopard 2 years ago and added RAM at the same time. My first problem ever occurred three days ago when my computer got super sluggish, I restarted and got the gray screen with apple and spinning wheel...no boot up. I ran disk utility from the snow leopard install disk and found "invalid node structure" and "invalid record count". After reading on here what to do...try to repair the disk and so on with no success I went out and bought Disk Warrior. Got home expecting to fix everything and Disc Warrior won't boot...I just get a file with a question mark and the disc is ejected. I tried erasing the hard drive but was only able to use the "don't erase data" option. Then I tried to reinstall Snow Leopard with no luck. Now I am stuck. Any ideas?
One thing to note is I am to the point of not caring about the files on the hard drive, I was a dummy and never backed them up...lesson learned! I just want my computer back without having to spend $1000+ for a new one. Then again I am always willing to do that too as a last resort.
PLEASE HELP!

When you contact Alsoft, make sure you let them know that you are using Snow Leopard (10.6.8).
Try the following in the meantime -
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
Try DiskWarrarior again if it's combatible with the os system.
YOu cannot reformat until you get your issue corrected.

How to determine the cursor record count before the "open cursor"?

Is it possible to determine the record count of an explicit cursor without running a count()? Say, my cursor definition is something like this,
CURSOR cur_vehicle
IS
SELECT os.order_id, os.order_item, vs.part_id
vs.part_num,
vs.iso_num,
vs.model_yr
vs.dealer_cde,
vs.cust_cde,
px.plant_cd
FROM parts_source vs,
orders_source os,
plant_tbl_crossref px
wHERE os.order_id = vs.order_id
AND vs.part_id = os.part_id
AND vs.plant_cde = px.plant_cde
ORDER BY os.order_id;
I want to log the count of records returned by the above cursor prior to the first fetch, without running a count(1) for the query in cursor select.
I know adding " Count(1) over(order by null) " in the cursor SELECT will bring it. But that does not help me log the record count to some log file or table before opening the cursor for processing.
To conclude, my objective is to update the record count of cursor in some table before processing

sarvan wrote:
Is it possible to determine the record count of an explicit cursor without running a count()?
..snipped..No. The only way to do it correctly is inside that select.
Each select is a consistent read. Which means that if this is done as 2 select statements, the 1st select can see a different version of the data than the 2nd select statement. does. So if you want a count and that to be consistent and on the same version of the data than the select, it has to be done as part of the select.
Also consider what a cursor is. It is not a result set of sorts that is created in memory upfront - with a convenient interface that tells you the size/number of rows of that result set.
A cursor is basically a program that reads database data as input and produce output. A fetch from a cursor is an instruction for this program to execute and output data.
There's no data set that is created by the cursor from which the count can be determined. The cursor program does have state variables - like +%RowCount+ that specifies how many rows the cursor has thus far output. And you need to run that cursor to the end (no more output) in order to determine the total number of rows output by the cursor.

Total records = "-1"

Hi there,
windows xp, dw cs, asb.vb, sql2005 express, iis6
Using server behavior "Record Set" and try to display "total
records". But i am getting not the real count i am getting "-1".
What is the problem? thx n regards
See Line 329 in the source:
Source Code
Screenshot
thx for the support
Sebastian

I do not know how CS3 implements its own record count.
Look at the code; if yourRecordset.RecordCount is used, then
file a bug
report. If some variable (like yourRecordset__totalRecords)
is used, then
there's some other problem.
"eFscl" <[email protected]> wrote in message
news:f58kjc$hjg$[email protected]..
>
quote:
Originally posted by:
Newsgroup User
> DW uses a firehose
> cursor, which does not support that property.
>
> Thank you very much for your feedback.
> I am not using my own or special ASP code for getting
the record count. I
> am
> using the dw cs3 record count feature. See the
screenshot in my posting
> and
>
http://www.fanclub.ch/screenshot4.jpg
>
> or do i have to modify the cursor type which was added
by dw cs3 himself?
>
> any other help around
>

Infocube record count.

Hi all,
I want to find out for a selection criteria ie fiscalyear = 2003 in a cube how many total records are retrieved. In infocube->manage, and then in 'infocube content' I filtered the selection criteria by fiscal year and also selected the check box 'Output number of hits' thinking it will display record counter, but I am getting one's in record count field. Any help in this.....is really appreciated.
thanks
Kiranmai.

Hi Bhanu,
I started again from infocube->manage and then infocube content. When I select both 'Use DB aggregation' and 'Output number of hits' check box then I get only one row as output and it gives me the total number of records for the selection criteria fiscalyear=2003.
It did solved my problem, but will try to do what you said in your previous post.
thanks

Disk utility gets "invaild record count"

Hello, Using Macbook pro running OSX 10.9.2
Yesterday, i was using my computer searching internet, plugged it in and walked away for about 5 mins. Came back and tried to open iTunes. I 1st choose iTunes using the button w/ the 6 squares on it on the top row of keyboard. Nothing happen and iTunes did not open. 2nd I tried to open iTunes using the dashboard. Again nothing happen. I used the power button to shut down the computer. Then restarted, it came up with a window asking which language I would like to use. I choose English and then a new window opens with 4 choices; "Restore using Time machine", "Reinstall OSX", "Get online help" (which is how I am here now), and "use disk utility". I picked disk utlity and verified the disk which popped up a window say it "stopped and needed to be repaired. I hit the "repair buttom" and got a "Invaild record count" in red. It then stopped and said it could not be repaired.
Tried to restore using the back-up/restore with Time machine. It found time machine, but on about the 4th screen it asks which volume I would like torestore to. Nothing comes up and just says "searching for disks" None ever come up. I quit disk utility and then choose "Start up disk" under the apple menu. It doesn't find anything. I tried the "command + option + P + R" nothing is different.
So here I am. each new screen that comes up flickers a lot before clearing.
Dead hard drive?
Just can't find it?
What's next?
Thank you for being here to help
Jody

Thank you dominic23.
I tried the instructions listed by Chris Watts1 and after running the /sbin/fsck_hfs -yprd /dev/disk0s2
it never asked for a password just said "starting". After waiting a couple mintues it came back with the following: (which I have no idea what any of it means)
journal_reply (/dev/disk0s2) returned 22
using cacheBlockSize = 32K cacheTotalBlock = 16384 cacheSize = 524288K.
Executing fsck_hfs (version hfs-226.1.1).
**Checking journaled HFS Plus volume.
hfs_swap_BTNode: invalid forward link (0xA9812964)
hfs_swap_BTNode: invalid backward link (0x0B69B6DB)
hfs_swap_BTNode: invalid node kind (-124)
hfs_swap_BTNode: invalid node height (42)
hfs_swap_BTNode: invalid record count (0x3E6B)
Invalid record count
(3, 3)
**The volume could not be verified completely.
volume check failed with error 2
volume type is pure HFS+
Primary MDB is at Block 0 0x00
Alternate MDB is at Block 0 0x00
Primary VHB is at Block 2 0x02
Alternate VHB is at Block 975093950 0x3a1ec0be
Sector size = 512 0x200
VolumeObject flags = 0x07
total sectors for volume = 975093952 0x3a1ec0c0
total sectors for embedded volume = 0x00
CheckHFS returned -1317 , fsmodified = 0
Does any of this mean anything to you?
thank you again,
Jody

Help - Total record count

Similar Messages

Maybe you are looking for