Help! Touch tracker stopped working!

Hello
My touch tracker has stopped working on my Blackberry Curve 9300 3G
I cant scroll or move round
Can you help?
Thanks

Have you attempted a soft reset by pressing ALT + Right Shift + DEL?
Have you attempted a battery pull?
What were you doing on your BB when this problem occured? Any recent updates? Check the top post for a neat form factor that you can put all your information in that will help us figure out a solution for you much faster. Cheers,
- Gary

Similar Messages

  • HP Pavilion touch screen sleekbook 14 - Help touch screen stopped working

    Hii have hp laptop - Pavilion touchsmart sleekbook 14 b150se - the device have a touch screen - it worked for about 6 months - then it stopped suddenly working after upgrading to windows 8.1 x64 (i.e. it worked in both windows 8 and 8.1 )then it stopped for no reasonwhile i was searching for drivers in hp site - i found an intersting driver was for windows 8 ( not 8.1) -which worked perfectly in windows 8.1 !!  AUO Touchscreen Firmware as in descriptionThis package provides the AUO Touchscreen Firmware Update for supported notebook models running a supported operating system. Link:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-122590-1&cc=us&dlc=en&lc=en&os=4132&product=5395092&sw_lang= well when i installed this driver - it told me to don't touch screen and remove protective film - then it did a erase to existing firmware - then flashing a new one - i mean it's not a normal update for windows it do something in the touch firmware not in device manger after about 2 months - suddenly i wasn't able to move the screeen - it was moveing toward the upper left corner and the touch icon that appear when i touch the screen was there too without touching the screen !!
    i did standby worked again for 2 min and then did the same upper left corner icon again - it did that a lot untill i did hard shutdown ( pressed power button for 5 sec cause the device stucked ) then the touch is dead i try to install the same firmware again - but it just open and close too fast - i got the files from the temp folder and when i see log it tell that when it check the firmware version it find it the same as installed so it skip installition
    also when i go to system info - it tell me ( Full Windows Touch Support With 10 Touch points )i also see the driver under Human interface devices in device manger - when i disable it the Full wndows touch support  line i system info dissapear so i know that it's driver and the device is connected also when i calibrate screen and touch it nothing occur i hope if someone help mesorry for detailed and long info but to get full info about the prob   

    Hi Slimon, I got the same issue as your prob that after the AUO firmware installed, then I ran over the internet to look for a solution. I tried tons of them but finally your way helps. Thank you! If the touchscreen of your laptop has been not working yet, you'd better try to erase the current one in the system, then re-install the firmware one more time. However, sorry I dont know how to erase it. You can probably create a new topic to post your question on this hp support forum and wish an upcoming answer helps. Good luck! Ray

  • Yoga 13 touch screen stopped working after update KB3000850, please help!

    Hi, my Yoga 13 touch screen has been working fine until yesterday. The laptop came with Windows 8, and last year I upgraded to Windows 8.1 without issue. Yesterday, I installed optional update KB3000850 from Windows Update, and immediately the touch screen stopped working. I have tried the following methods, all without success:
    * Uninstall KB3000850 from Windows Update
    * Use Windows Restore to restore to the point before yesterday
    * Re-install Intel Chipset Driver from Lenovo official driver page
    * In Device Manager, uncheck all the "allow system to turn off to save power" options for the USB input devices under Human Interface Devices then restart
    * Two-button shutdown and restart
    * Install Lenovo Driver Manager and let it check for new drivers
    * Download Cando multi touch panel driver (Note: I could not install the driver because all I got was a .cab file which does not allow me to install)
    As of now my touch screen is still not working. Computer Information page from Settings shows that there is no touch or pen device for my screen.
    Can anybody help me with this? Thanks!

    Very true, this has been a known problem since the first day Lenovo released the Yoga 13.
    I need to send Lenovo a bill for my time spent rebooting.  So far i am on my 8th reboot.  In the past, around 5 reboots after winddows update would work.  This time... who knows.
    Of course it always happens when you have a deadline.
    Please post back if you have found a better soultion than system restore.
    Thanks for posting this issue.  More users need to bring this to Lenovo's attention.

  • Ipod nano 6th gen touch screen stopped working please help

    Everything on the ipod nano 6th gen is working except the touch screen and once it goes to sleep i have to hold the sleep button and the volume down button to turn it back on. I went into the volume -, sleep, volume + menu and went through the tests and in the touch panel error check section it says i have IC error reported: 0xFFFFFFFF. Please help as i have reset and restored and update itunes etc. Do i need to send it in to apple? The touch screen was working at one stage and then i disconected from the computer while it said eject first (this is when the touch screen stopped working) and put the ipod on a different computer. The first computer was windows 7 which i used just to charge it a little and the second one im using is windows vista.

    I have had the same problem and changed three Nano's. Each time the fault is diagnosed by Apple as "water damage".
    If you take your Nano to one of their maintenance centres they will look into either the headphone socket or the power dock and and tell you that you have infringed the warranty by somehow getting the thing wet.
    Basically is a poorly designed piece of kit whereas a simple shuffle is way more robust.
    I have given up with my Nano and am now using an old model

  • Sony vaio SVF14N16SGS TOUCH screen stop working suddenly help me to fix this

    hi alli buy sony vaio SVF14N16SGS and calibrate a touch screen i working with laptop but approximately befor 20 minute laptop touch screen stop working suddenly!!!!!!!!!!!!!i am very disapointment from sony Corporation for this bull******e bug please help me to fix iti appreciate it

     
    Hi Jimmy_N, 
    Thank you for considering Sony Community! 
    We're sorry to hear this issue. Please follow the troubleshooting steps here to isolate the issue: 
    Power cycle - Remove the battery and all peripherals -> press and hold the power button for 5 seconds OR, if the battery is not removable, remove all peripherals-> look for a battery off button on the bottom of the laptop -> push the button for 5 seconds
    Reinstall driver - Go to Device manager -> Human Interface Devices -> right click and select Uninstall (DO NOT DELETE). Restart the computer. The driver will be reinstalled.  
    Reset BIOS - While the unit is restarting, tap the F2 key repeatedly. Once in BIOS go to Exit tab -> Get Default Values -> Save the changes and Exit. 
    Update drivers from Sony's support website or from where you purchased the laptop. 
    Your Vaio SVF14N16SGS is not a U.S. model. We do not have the drivers and software that support your computer. For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
    Hope these help. 
    Thanks,
    Vincent 
    If my post answers your question, please mark it as "Accept as Solution"
     

  • Multi-touch gestures stop working?

    Apple, there is an annoying bug in Mountain Lion that needs to be fixed.  Sometimes when we wake our computers from sleep, multi-touch gestures stop working.  The problem is related to the Dock.  Restarting the dock by typing "killall Dock" into Terminal and hitting return provides a temporary resolution, but the problem will eventually return.  There are several other posts in this forum and others.  Seems like there should be an easy fix to what is the only complaint I currently have with your new operating system.
    Thanks.

    We are not Apple. We are users like you who help each other. If you have something to say to apple, contact them here.

  • HP Pavilion dv7 2230ev , quick launch touch buttons stopped working

    Hi, i own a HP Pavilion dv7 2230ev  for th past month and one day the quick launch touch buttons stopped working(sound volume,wifi,music player). i used them for a month with no problem and suddently -no fall or software change- they stopped working, i even did the HP recovery to factory settings from the backup partition and still no change.99% its a hardware fail but i want to avoid giving it to hp service center,i was told they had a 20day wait,just to look at it...any ideas?

    Hi,
    You're welcome and I'm glad it helped
    All the best,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Pavilion23tm touch feature stopped working

    I have the monitor set up as a second monitor to a dell all in one.  The touch feature stopped working on the 23tm.  I have updated the drivers and installed the latest Windows 8.1 updates.  What else can I do?

    Hello @jchun,
    I understand that you are having issues getting the touch part of your HP 23TM LCD Monitor to work with your Dell computer running Windows 8.1. Unfortunately, at this time there are no drivers for this monitor listed for Windows 8.1. The only drivers I was able to locate was the HP 23tm LCD Monitor Driver, which is for your monitor on a Windows 7 or Windows 8 computer.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a wonderful day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Touch screen stopped working on iPhone 5

    Hi guys,
    My brother is using iPhone 5 in iOS 8.0.2 v and suddenly his phone start searching for the antenna and the touch screen stopped working (I can't even side to unlock )!! The screen will be on still the phone reset automatically and when is up it will search again for the antenna and every steps repeat all overThe screen Really got confused what had happened to phone. Even I try to reset it by holding Power bottom and Home bottom after resetting nothing has changed. Also the bottoms stopped working while the screen is on (when I'm holding the Power bottom it won't show me to side for power off )
    Every time I had a problem I posted my problem here, but i got nothing from anyone, if is it for my bad English I'm sorry but I really need some help here.
    What can I do!?
    Thanks

    First, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. If this does not work, set it up as new device without using the backup, in case it contains corrupt data causing this problem.
    How to back up your data and set up as a new device
    If still no luck, get it serviced by Apple:
    Apple - Support - Service Answer Center

  • Touchsmart Touch features stopped working on my replacement TM2 laptop. Second time.

    Touchsmart Touch features stopped working on my replacement TM2 laptop. I have an extended warranty, but HP's website does not see it. It only lets me call in for help. I called in, spent 30m on hold, and hung up in frustration. I am sick of HP's craptastic quality control, whether in midrange servers like the DL-585 or on consumer products like the TM2. Every time I try and use an HP product in our data center or office, it ends up embarassing me. When we try and get support, HP makes every effort to make it difficult either on the web or online. Do I seriously have to escalate to our district manager every time? I'm beginning to think HP is a vendor best left off the candidate list for future purchasing. There's easier and more fun ways to waste my time.

    My problem has been resolved on my next start up. Not sure what triggered the fix, but when I started up and during the Window start up image I pressed in sequence both DEL and ESC (I read something on another forum somewhere). May have had nothing to do with it, maybe the restore triggered?? but somehow when it started up it ran a sequence of fixes (A quick pop up said running .. of 13,000 updates), then the touchpad etc was working again.
    My machine is runnning the standard windows 7. Just to answer your question there is a option under (control panel / Hardware & Sound / device & printers / right click keyboard settings) that checks the drivers.
    Thanks for your help.
    Cheers

  • Laptop curser and touch pad stopped working for my pesario cq61 how do i fix it?

    laptop curser and touch pad stopped working for my pesario cq61 how do i fix it?

    Hello jamdizzle,
    Welcome to the HP Forums!
    I understand the touch pad on your notebook has stopped working. I will help you out the best I can!
    I do have a workaround that may work, if you wish to try it:
    1. Go into Device Manager, then Mice and other pointing devices.
    2. Right-click on the mouse driver, and select "Uninstall".
    3. Restart the computer. This will force the computer to install a driver based on the detected hardware.
    This should resolve the issue. If not, please provide the following information:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Have you installed any new hardware on this computer, before the issue appeared?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    Mario
    I worked on behalf of HP.

  • Touch Screen stops working while charging

    Hi All,
    I have just purcahsed a Torch 9810 and have uploaded it with latest OS 7.1. I am facing problems like :
    1. The touch screen stops working while the phone is getting charged.
    2. The screen gets hanged very frequently. Should we use it very calmly or is it hanging because we use it too fast. For this condition,solution i am left with is a HARD RESET. But till when this will help. Please suggest some work around.
    3. When i select Loud profile,for sometime it works and after that it stops working. I try to ring it manually by going to LOUD profile sound settings and pressing the TRY IT option. I do use a cover. Does it makes any difference ? The problem goes when i do a HARD RESET. But why is this happening ? Any Other setting neds to be done ?
    Please HELP or Suggest what to do !!!!!
    Regards,
    Ronak Gupta

    This is probaly a software problem in my opinion this could probably be resolved at the genius bar in any apple store also your phone should be under warranty as it is a iphone 5 and they did not come out not so long ago so in other words go to a apple store and they might have to replace the phone. In my experience this has nothing to do with the cable but a software issue in ios did this issue happen in any earlier version of ios

  • Why did my brand new Ipod 5g 32gb touch screen stop working?

    So I got this ipod from the Genius Shop for about a month. A few days ago when IOS 7.1 came out, I updated it. However, the ipod seems to lag a little. Today, I was charging my ipod and for some reason, when I turn it on, the touch screen stop working (the ipod is in perfect condition). The home button, volume button and the on/off button all works fine except for the touch screen. I want to restore everything on my computer, but I can't get pass the lock screen (the touch screen seems to stop working). I just can't do anything on this ipod anymore beside turning it on and off. I can't even power it off because the touch screen is no longer touchable. So how can I restore everything, or do something about this ipod to work again. Can I still take this back to the Genius Shop and get another one without additonal charge?  

    If the reset does not work try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • HT201263 My iPod touch suddenly stopped working. It was fine, but when I went back the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. What should I do?

    My iPod touch suddenly stopped working. It was fine earlier, but when I went back a few hours later, the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. I thought it just needed to be charged but there seems to be a larger issue now. What should I do?

    Let your ipod die. Then when it is dead charge it adn turn it back on. After that it should be fine.

  • My touch screen stopped working...on my brand new replacement iPod touch.

    I recieved my replacement while on vacation in Vegas, about five days ago. My new iPod has been kept nice and safe in it's case without any bumps that could damage it. Today, May 4th, I go to school with a perfectly working iPod. On my way home, kept safe in my pocket all day, the touch screen stopped working, and restarting it didn't fix it. It's brand new, so whats wrong and how can I fix it PLEASE!

    yes i have the same problem. But also other then the fact that the touch screen doesnt register it is really dark, like there is no light bulb

Maybe you are looking for