[help] Transcoding for Bluray using a CS5 project on CS4

Hey guys, I'm back again.
I'm not sure how to approach this, but I am currently using Encore CS5 but my school uses CS4. I created a full project (the same film that I have had issues with previously) and changed the build from DVD to Bluray and tried to have CS4 transcode. As soon as the menus were done rendering, CS4 will crash citing a rendering error. As I am typing right now, CS5 is transcoding for bluray without a single hitch. The only problem is, my laptop does not have a bluray burner, so i have to rely on the school's system that still runs CS4 to burn the bluray.
I'm thinking that a workaround to this is probably to duplicate my project and bring in the transcoded files as an asset and put them in the timeline, place in the chapter markers/poster frames and build from there. I'm wondering if there's an easier way to do this.

There is no need to burn iso to disc using any other software.
You can burn iso to disc from Encore also.
Steps to burn iso to disc through encore -
1. create a new project
2. Go to build panel
3. select the Format as Blu ray and output as Blu ray disc
4. Select source as Disc image.
5. Browse the image path and burn the blu ray disc.
Thanks,
Pankaj Gauba

Similar Messages

Anyway to use CS5 project in CS4?

I'm basically in a position where I can't upgrade my laptop to a 64bit one with my current budget. Since Premiere and After Effects CS5 can't work on a 32bit system, is there any kind of workaround? Like maybe pulling CS5 files in CS4?

CS5 project files do open in CS4, relatively successfully. I wouldn't bounce back and forth between the two programs too often, though--you stand a pretty high chance of breaking the project with too many conversions. If you're doing it once or twice, you're probably OK; just make sure to back up your original project before doing anything.
If that doesn't work, you might also be able to export an AAF file from CS5 (Project > Export Project as AAF) and open that in CS4. Note that whichever method you use, if your edit is more complicated or uses a variety of effects, you're likely to not have everything make the trip.

Opening CS5 projects in CS4?

Im still using AE CS4 and I'm trying to work on a project with someone using CS5, but I'm unable to open his .aep. Is there a way for him to save his CS5 project so that it can CS4 can open it?

Sorry, there is not a way. AE has never been able to do it officially. There were hacks that worked sometimes in earlier versions, but not between AE 9 & AE 10. AE 9 is 32-bit, and AE 10 is 64-bit, a very fundamental difference.
You would need your buddy to replicate his AE 10 work in AE 9, or you could import rendered files from your buddy. But that's it.
How 'bout AE 10 & AE 10.5? You can backsave from 10.5 to 10 as long as the project contains none of 10.5's new features like Warp Stabilizer.

Using Dreamweaver CS5 with other CS4 programs

I want to purchase Dreamweaver CS5 for my work computer because it is the same version I have on my personal computer, and I want the two to be compatible. However, there are other Adobe CS4 programs on my work computer (InDesign, Illustrator, etc.). Will any problems arise by having Dreamweaver CS5 and other CS4 programs on the same computer? Any input is appreciated. Thanks in advance!

Are you intending to purchase a standalone version of Dreamweaver CS5?
Your work computer has probably got a CS4 Creative Suite installed (Design Premium CS4?).
You won't be able to upgrade Dreamweaver CS4 (from the Suite) on your work computer to standalone Dreamweaver CS5. It's not a valid upgrade path.
Tip: CS6 is due to be released very soon.
http://store.adobe.com/store/en_us/popup/offer/cs55_cs6_faqchannel.html
Although free upgrades from CS5 (purchased after 26 March 2012) are available, there is some paperwork involved. In your position, I personally prefer to wait until CS6 ships - unless CS5 is really the version you want, of course.

CS5 project to CS4

Are we able to continue editing project created with CS5 in Premiere CS4?
Thanks.

Photoshop and Illustrator have had similar over the years. Now, a PrPro Project is far more involved than a simple PSD, or AI image file, so much more would have to be done to make that happen.
Historically Pr/PrPro has never had backward compatibility.
Maybe file a Feature Request.
Good luck,
Hunt

Help needed for a Final Cut Express project Compression

Hi guys,
This is my first post as I usually find answers to all my questions reading through the various thread. I just haven't found an answer to my last pb yet hence the new topic. Hope you guys can help.
I have got this very simple slideshow that I need to burn onto DVD. The issue is that it's LONG. It's an hour and 17 minutes and i have no idea what is the best way to compress/export this so I can burn this on a single layer DVD.
I tried various options and it suddenly stops because I "only" have 13GB of free space on my macbook. 13GB!!!! How will this ever fit on a DVD? and this is with medium quality...
please help!
Thanks a lot in advance!

Hi Sasha.
Woke up this morning and the burning never started because the file was too big. I exported the file from FCE and it was 16GB! iDVD never managed to fit it in my single layer DVD. Am I using iDD correctly?
I am thinking I need to compress this further on FCE right? I don't understand why such a simple movie (although very long) can take so much space. It's only about 900MB of JPGs and 120MB of music. I don't want to bring the quality down to "low" because it won't look good.
So far, I have been exporting using quicktime conversions and I tried the following formats: tried exporting in AVI and QuickTime Movie. For the compression type, I tried DVCPRO50-NTSC on medium quality (with AVI) and Photo-JPG & DVCPRO50-NTSC again (with QuickTime Movie) both on slightly better than medium quality. Results all were well above 10GB.
Please, help!
Thanks.
Hope you can help.
Emilien

Seeking Help/Advise for Premiere Pro CS3 editing project

Hello everyone,
I am an Absolute newbe here, and to both forums and Adobe in general, so I may be going about this all wrong. If so forgive me, but I have a problem that I would Desperately like some help with.
For about twenty-five years I have been looking for a movie, the problem was hampered somewhat by the fact that it was never released on either VHS or DVD, making it rather hard to find as you might imagine. Now, thanks to the wonder of a (new?) site called youtube, I found DL it piece by piece. I dont mind that it is not DVD quality, in fact, since it was originally a made for tv film, I kind of like it.
The PROBLEM is that for some reason the audio doesnt match up with the video. It is a few seconds before/after (Dont ask me why, I dont Know computers much) and though I have dl/tried every program I can get my hands on, I cant seem to join the pieces together and get the stuff to sync up. Its like watching an old, old Japanese monster movie and watching Those gave me a headache when I was young lol.
Then someone told me that Adobe Premiere Pro CS3 could fix the problem, so I DL it on a trial basis. Thing is, I know nothing about computers and cant even get the movie to load. Let me say I am not especially computer literate, and while I am currently trying to figure out Adobe Premiere Pro CS3 I most likely Wont be keeping it past the 30-day trial. Not that I dont like it (I suppose, so far I have been able to get absolutely no place with it) but rather because I DL it for one reason and, at almost a thousand dollars, it seems an extravagance for a program I will likely never have the need to use again.
(No disrespect intended)
With utmost respect to all, could someone either guide me through the process or convert the thing for me? I have tried going the video editing rout, but they wont help me due to a copyright thing (though I grabbed the thing from public youtube). I dont want to publically display, resell, show off or make a dime from the thing, I just want to make it sync up and burn it to dvd to watch on my tv.
Any advise/help would be warmly appreciated. I am posting this in a couple of forums, so like I said, if I am out of line I apologize.
Respectfully to all.
B G

To John Smith,
Thanks, I have now dl elements and I am going to fool with it today, wish me luck.
To Malick,
Exactly why I am here. Because I am computer functionally illiterate, I am hoping someone here can either:
A: Talk me through the process.
or
B: Be convinced to do it for me. I am willing to deal. :) (I suspect it is the kind of thing that, a person who Knew what they were doing, could do it in about five min.)
For me, who has only used computers for the most Basic things.....
I have tried putting everything onto a CD and taking it to places, but each time I get told that, even though I found the thing on youtube, it is (Was) a real movie released on TV and as such cannot be touched due to copyright. (goofy, if ya ask me. I don't want to sell the thing, just watch it)
But I thank you.

How do I store a compound clip for later use or another project?

I created a compound clip, then lifted it from story line and disabled it, its darkened (invisible doesnt play in the viewer),
however its space runs as black empty frames when I play over it.
I want to do 2 things:
I wanted the footage proceeding it to shift in left to fill that black void and play, as the compound clip is "hidden". Is this possible?
I also wanted to save that compound clip for use later in this project and possibly in another project, can I save it out as a separate clip set?

I think I got it, lift the compound clip from storyline by right clicking and choosing "lift from storyline",
drag the compound clip left or right out of its original position, select the grey slate where it used to be in the time line, and hit delete. the clips to the right now shift left to fill its void.
and the compound clip is automatically available in the event library folder its grouped clips originated from but now shown as a compound clip once you create that compound clip..

Faster exports for BluRay: Use .avi or mp4?

Hello,
I have digitized about 20 movies to .avi files. In total, the are about 300GB. My goal is to use Premier to create a movie with these files and to insert chapter markers to separate them. Next, export the movie to Encore to build an H265 BluRay disk with the chapters. I've found that the rendering time is off the charts... Would it be better for me to convert the .AVI files to .MP4 and use them in the movie? My thought is that the compressed format will reduce the time it takes to export to Encore and for Encore to build the BluRay disk. If this idea is a good one, will there be much loss in quality? I am using Adobe Cloud versions of the applications...
Thank you for your time and advice,
Mike

>digitized about 20 movies to .avi files
How, and exactly what is inside your avi files?
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Help needed for where used list

Hi All,
I want to use where-used list for the logical database BRF(Selection screen 950).When i hit where-used list in SE36
it gives all the programs which use LDB 'BRF' but i want only the programs that use LDB 'BRF' and selection screen 950.
Regards
Divakar

hi
good
go through these links
http://help.sap.com/saphelp_nw04/helpdata/en/03/07b4e75eee423aafab88354306eafc/content.htm
THANKS
MRUTYUN

Help Required For HF100 Used With FCE 4 ?

No, it's not for me.
A few days ago Tom Bigley tacked this question onto another HF100 thread but it seems to have gone unnoticed, so I am reprinting it here:-
"Forgive me if I am going over old ground but I have just acquired a HF100 and want assurance I have understood the AVCHD/FCE relationship correctly.
I must use High Quality XP at 12Mbps (1440 x 1080)
I cannot use High Quality FXP (1920 x 1080)
I cannot use Cine and 25Mbps or I get into interlacing complications
I import using Easy SetUp set to Apple Intermediate Codec
with the Use Tab set to HDV-Apple Intermediate Codec 1080i50
Am I there or are there any other pitfalls I've overlooked?
Tom."

Hello Richy
My first thought is, can't you just put the graphic elements in to the photo with your choice of editor?
It looks like you are trying to position two yellowy-green lines in the page as well. You could put one of those lines in to the image and one in the left panel as a background (I'm not absoulutely clear where they go but I think I've made a pretty good guess.)
You could try adding a header div and using a slice of the image as a background and position your logo elements in that with float, margin, padding or whatever.
Basically, you have a two column layout which is quite simple so there should be a solution.
You could try putting the main image as a background image and position your graphic elements in the content panel (div)?
If your main image is a background though, I think you might have a bit more difficulty with height so, you would have to perhaps use the left column content to determine height.
These are just a few thoughts but given with the caveat of my novice status! I've only just learned to tie my HTML shoe laces.
Good luck
Martin
PS I remember a few years ago now, bing advised through these pages to only use absolutely positioned elements if you really have no other alternative and then if you do, to only use one! Since then, I haven't ever used one.
PPS I like your design very much but I am not sure about that bright yellow text? The pink circle looks as though it should be crazy but it fits beautifully with your colour scheme. That yellow hits off it a bit in my mind and jars a little.

Publising times for IOS using Flash CS5.5

I am doing some tests with Flash CS5.5 and AIR 3.0 and literally testing a hello world type app.
It is taking a considerable amount of time to create the ipa file. I timed it and it was about 12 minutes. I have a reasonably good spec PC son wondered if this is the normal amount of time it takes to publish?
Thanks in advance...

Thanks for the reply. That is really strange how the publishing time varies so much. I tested on my Mac and it was about 2.5 minutes - the great thing on the Mac is that it estimates the publishing time and then counts down the time however there was an additional delay once it had reached zero but still way quicker than on the PC for an identical build.

Save cs5 projects as CS4 Compatible

I have plans to acquire AE CS5, but need to know about the projects I made in AE CS5 on my home PC, can be saved so they can be opened in AE CS4 on my work ?
And the same questions about Premiere CS4 and CS5..

So, again, I urge everyone to submit feature requests.
The number of requests for a given feature matters. This is not an
impossible feature, but it's not a trivial one, either. If we get a
sense that it's more important than other things, then we may do it.
So, I'm a Adobe Prodcts User (especially After Effects for 10 Years now) and I cannot count it anymore how often I have heard that advise.
I stuffed a lot of money into Adobe Products and I contributed with feature requests since year 2000 ... but I'm not geting into this discussion anymore.
Finally for me, all this "feature request" topic it's pure baloney, because i cannot trust you guys anymore.
If we get a
sense that it's more important than other things, then we may do it.
I've been reading the same sentence from several different people at Adobe who are responsible for their Application.
Illustrator, Photoshop, Lightroom ... you name it.
The truth is that there are several people out there in the world who have no relation to Adobe Engineering and might get the job done.
One of them is Paul Tuersley who is contributing at aescripts.com.
Lloyd Alvarez provided some news on upcoming Scripts and Plugins, one of the scripts are "OpenSesame" which allows you finally downgrading projects. Of course some limitations will apply, but downgrading a simple project that has the same basic attributes as any other project version has, will work. Evidence is proof. Check aescripts.com or aeplugins.com on a regular basis for news and other VERY helpful scripts and plugs that might save your sanity.
So, now i'm curious what someone at Adobe has to say to this.

Help to create outlines using javascript in adobe illustrator cs4

Hi,
Please help me to create outlines using javascript in illustrator cs4.
Thanks
Karthik

The textFrame object has a createOutline() method. So if you are wanting to save a version of your file that will not require fonts then loop thru these items in your document… (Loop backwards btw its easier that way) Take a look at the other posts at the top here as others are wanting to do the same thing… If your document is more complex then you may need to iterate all the way though which takes a bit more work…

Re: Tutorial: Using an EJB Project

I am a computer engineering student who is learning weblogic. I appreciate if
anyone can help me with my question on Using an EJB Project
This tutorial can be found in weblogic 8.1: go to workshop ->help->Tutorials and
samples-> Using an EJB project
On page 11, section: Create a web application, it asks to import a webapp file
that nowhere to be found in beahome. Where can I find webapp file for this
ejb example
Thanks very much,
Jessica

Hi Jessica,
If I'm understanding your question correctly you're running
the EJB tutorial that's being shipped with the 8.1 beta correct?
I just did a quick check on my installation of the pre-beta installer
and didn't see it there so it's possible there's a bug in the installer
or something. At any rate, I've attached a zipped up copy of that
tutorial code here. Hope that helps.
Michael Kovacs
Senior Software Engineer
BEA Systems
"Jessica " <[email protected]> wrote in message
news:3e9b0cfc$[email protected]..
>
I am a computer engineering student who is learning weblogic. Iappreciate if
anyone can help me with my question on Using an EJB Project
This tutorial can be found in weblogic 8.1: go toworkshop ->help->Tutorials and
samples-> Using an EJB project
On page 11, section: Create a web application, it asks to import a webappfile
that nowhere to be found in beahome. Where can I find webapp file forthis
ejb example
Thanks very much,
Jessica[EJBProject.zip]

[help] Transcoding for Bluray using a CS5 project on CS4

Similar Messages

Maybe you are looking for