Help transferring data from one account to another

I bought my computer in August 2008 and had previously had an iBook. When transferring my data from my old computer to the new one, I guess I did it wrong so instead of it transferring all to the same place it created two accounts.
Is there way to transfer my music/pics etc to my main account?
Also, my iphone is backed up the other account because thats where all my music is, is there a way to also keep all this data once I am using only the main account?

When you use Migraine Assistant, it transfers the account of the older machine to the newer because the users name is involved in everything, like iTunes playlists etc.,
Since to run Migraine Assistant you need to have gone through setup on the Mac and created the main Admin account, when you Migrate, you transfer the other account so you wind up with two accounts on the new machine.
All you have to do is log into the Admin account of the first user you created, then change the acount status of the Migrained account to Admin and reboot, check it out well, then delete the first Admin account at your own leaisure. However it's best to leave two accounts on the machine, just in case your locked out for some reason.
If you rather transfer your files from one account to another use the Shared Drop Box
If you have three accounts on the machine (original admin and two migrained migrateda accounts), you'll just have to monkey around and clean up the mess.

Similar Messages

  • Help transferring data from one computer to another

    My aunt uses Palm Desktop as her calendar but does not have a palm pda or phone.
    Her computer at home recently died but she was able to get the palm installation folder from the old hard drive.
    She has Palm Desktop installed at work but the information in it is totally different than what she had at home.  She wants to import the data from her home installation into the installation she has at work.
    It used to be really easy to transfer settings from one Palm installation to another.  Side note: My wife has a Palm Treo 650 and I recently formatted her computer and tried to copy her old installation folder from a backup to the new install directory.  Well, it didn't work like it used to.  I don't know if the software has changed or what.  But, she didn't get everything.  It's been a while, I can't remember if she didn't get ANY of it, or just some.  I remember at one point it only showed her contacts for A-M...N-Z were just plain gone.  Really strange.
    But, back on topic, I tried creating a new user in Palm Desktop and then copy the files under her old username folder to the new username folder in the Palm install directory.  But, Palm Desktop doesn't show anything for the new username.
    How should I go about doing this for her?
    Thanks!
    Post relates to: Treo 650 (Alltel)

    The user on her home install was also Trisha.  So, I created a new user on the work computer, "Trisha2".  Then I closed Palm and copied the contents of her backed-up Trisha user folder from home into the new Trisha2 folder on the work install.  Then I started Palm and flipped to the Trisha2 user.  Nothing showed up.  So, I've pretty much done the exact process from the link already.  Which is exactly the way I thought it should work and have had it work in the past.
    I'll try it again without using numbers in the username and see what happens.
    Thanks!
    Post relates to: Treo 650 (Alltel)

  • Transfering data from one account to another

    I just discovered that the user files from the second account on my iMac g5 have somehow transfered into the trash of my first account( which is my main one).I was getting in the second account the following dropdown message- " the home folder is not accessed in the usual place"- and was unable to use it.Can someone please tell me how I can transfer the user files back , thanks

    if you are suggesting I drop the User folder i have in trash into my USer folder in the Hard disc surely it will stay in my first account
    No definitely not in your Users folder, but the Folder called Users, which also has all the other shortnames in it.
    This one in the Trash isn't called Users is it? If so open it up & just look for the other shortname folder, move that.

  • HOW TO TRANSFER HISTORICAL DATA FROM ONE ACCOUNT TO ANOTHER

    제품 : FIN_GL
    작성날짜 : 2006-05-29
    HOW TO TRANSFER HISTORICAL DATA FROM ONE ACCOUNT TO ANOTHER
    =============================================================
    PURPOSE
    특정 기간의 Balance 를 Account 별로 Transfer 하는 방법에 대해 알아 보도록 한다.
    Explanation
    GL 의 Mass Maintenance 기능을 이용하면 한 Account 에서 다른 Account 로 혹은 Multiple Account 에서 다른 하나의 Account 로 Balance 를 이동 시킬 수 있다.
    1. GL Responsibility 에서 Other> Mass Maintenance 를 선택한다.
    2. Move/Merge 작업을 위한 Request Name 과 Description을 입력한다.
    3. Request Type 으로 Move 혹은 Merge 를 선택한다.
    4. source-to-target account 를 위해 line number 를 입력한다.
    5. LOV 에서 source Account 를 선택하여 입력한다.
    모든 Account 는 enable 상태여야 한다.
    6. target account 역시 LOV에서 선택하여 입력한다.
    7. 지정한 작업을 수행 하기 전에 먼저 확인 작업을 할 수도 있다.
    8. 작업한 내용을 저장한다.
    9. Move/Merge request 를 수행한다.
    Example
    N/A
    Reference Documents
    Note. 146050.1 - How to Transfer Historical Data from One Account to Another

    Follow the directions here:
    http://support.apple.com/kb/HT2109

  • Transferring credits from one account to another..

    Hi there, I have a skype account in my name. I have subscriptions on that account as well as credit. I would like to pay my subscription from my credit amount and as well, would like to transfer credit to a new account I just set up for my husband..how do I transfer my credit to his account please? And how do we pay, not from my credit card but from my credit until the credit is used as I don't need both a subscription and credit. Thank you

    Hi, Cherylgustavson, and welcome to the Community,
    Skype credit, subscriptions, and features can not be transferred from one account to another, unfortunately.  If you have purchased the credit within the past 15 days and not used it, you may request a refund: https://support.skype.com/en/faq/FA12147/when-can-​i-get-a-refund?
    To change the payment method of a subscription from whatever you were using to use your credit, this FAQ article explains how to do this: https://support.skype.com/en/faq/FA1781/how-can-i-​pay-for-a-subscription?
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Transferring music from one account to another

    I wanted to know if there is any way I can transfer music from one account to another account, my music library has over 1000 songs and i do not want to download them again, is there a way? THANKS!

    Below is the information on how to take the music and transfer it to another machine that will be using the same apple ID.
    But as stated earlier there is no way to transfer music to a brand new Apple ID without having to purchase it again as all music is tied into the Apple ID used at time of purchase.
    Copying iTunes Store purchases from your iPod or iPhone to a computer
    http://support.apple.com/kb/HT1848
    About iTunes Store authorization and deauthorization
    http://support.apple.com/kb/HT1420
    How to back up your media in iTunes
    http://support.apple.com/kb/HT1382

  • Transferring tunes from one account to another

    Apparently I once set up an account with a different name...when I lost my hard drive....now i have 67 purchased tunes that won't load on my iPod because I "don't have authorization to listen to them on this computer." I have tried everything suggested...re-authorizing the computer doesn't do it. Is there anyway to get the tunes purchased under one account over to the current account?

    When you purchase protected content with a certain account, a computer MUST be authorized with THAT account only to play that content. There is no way to transfer ownership of a song from one account to another.
    However, I am not sure why authorizing your computer is a problem. You authorized your computer with your old account which the music was purchased with, and they still didn't transfer?
    I suppose what you could maybe do is contact Apple Support and explain your situation here: http://www.apple.com/support/itunes/contact.html?form=music&topic=Music%20Purcha ses&subtopic=Music%20Overview, but I'm not entirely optimistic they would fulfill that request.

  • BADI for transfering data from one modal to another modal within single appset

    Hallo Experts,
    My Business Requirement is Transfer of data from one modal to another in same environment and did this taking reference from below document.(How to custom badi for replicating destination app)
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e04b5d24-085f-2c10-d5a2-c1153a9f9346?QuickLink=index&…
    Document contains TR for implementing BADI, but this document supports bpc version 7.0 and we are using is bpc 10.0.
    So i make all compatible changes in BADI implementation and activate it. Now i am testing using transaction UJKT using following script.
    and the result is records successfully written back to application MIS, but when i check data is not moved to target application MIS.
    I am facing stuck situation in my project work. Please Suggest. Hope for positive reply.
    Script:
    *XDIM_MEMBERSET WM_ACCOUNT = WM_041,
    *XDIM_MEMBERSET WM_UOM_02 = UOM_004
    *XDIM_MEMBERSET WM_UD_2 = WM_07
    *XDIM_MEMBERSET WD_EXT_MAT_GRP =CHALK-PH-I,CHALK-PH-II,CHAVN-PH-I,CHAVN-PH-II,NASHIK-WM,RAJASTHAN-WM,TAMILNADU-WM
    *XDIM_MEMBERSET CATEGORY= Plan
    *XDIM_MEMBERSET AUDITTRAIL=Input
    *XDIM_MEMBERSET P_ENTITY = SIL
    *XDIM_MEMBERSET RPTCURRENCY = LC
    *START_BADI DAPP
       DESTINATION_APP ="MIS"
       RENAME_DIM ="WD_EXT_MAT_GRP= PRODUCT"
       ADD_DIM ="PLANT=NO_PLANT","MIS_ACCOUNTS=CAIN0058040008","COST_CENTER=NO_COST_CENTER","FLOW=Opening","UOM=AMT","CUSTOMER_SALES_2=NO_CUSTOMER","CATEGORY=Plan","AUDITTRAIL=Input"             
       DEBUG = ON
       WRITE = OFF
       QUERY = ON
    *END_BADI
    Please find attached result.
    Regards,
    Dipesh Mudras.

    Hello,
    Here is the manual to copy data between apps (it works with BPC NW75):
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0480970-894f-2d10-f9a5-d4b1160be203?quicklink=index&overridelayout=true
    It works me, but now I need to modify the Script Logic to make that a "property" from the origin dimension has to be copied to the destination dimension as "id", like follow:
    //*XDIM_MEMBERSET CATEGORY = %CATEGORY_SET%
    //*XDIM_MEMBERSET TIME = %TIME_SET%
    //*XDIM_MEMBERSET ENTITY = %ENTITY_SET%
    //*XDIM_MEMBERSET RPTCURRENCY =  %RPTCURRENCY_SET%
    *START_BADI FiltroPD
         WRITE = OFF
         APPL = $APPLICATION$
         ADD_DIM = "ORIGEN = APPVENTAS"
         ADD_DIM ="O_COSTE = no_input"
         ADD_DIM="CECO = no_input"
         RENAME_DIM="P_ACCT = RATIOS.P_ACCT "
    *END_BADI

  • Fatal error while transferring data from one bb to another

    I was trying to transfer data from one bb to a different bb using the bb desktop manager tool.  It collected all the data from the first bb fine and then while transferring data to the new one it said a fatal error occured to try again.  That bb will not even turn on now.  No white screen or anything.  Its like there is no operating system.  I don't know what to do.  I tried to connect it and just update the software but that isnt working either.  Says it is not responding during initialization! I think I killed it.... any ideas what to do???

    You can try to reload the OS in one of the following ways
    http://www.blackberry.com/btsc/KB03485
    http://blackberryfaq.net/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • Help with migrating user data from one account to another

    I am on a G5 with 10.4.11. I installed FCP studio 6 and everything works fine except compressor. I have had only one user account on this mac (i will call it account 1). I was told to create another account (account 2), log on and see if compressor works. It does. Basically there are files missing on account 1 and compressor won't run. I have installed 3 times and no change.
    Anyway I was told to migrate all my user data from account 1 to account 2. I have been looking at threads and want to make sure I am doing the right thing. I found a way to close. Please see if this works. IT may be from the tiger forum:
    pick a short user name for your new account. then run the following terminal commands
    sudo mkdir /users/newshortname
    sudo ditto ~ /users/newshortname
    You'll have to enter your admin password (which you won't see) after the first command. that's normal. This will copy your current home directory to /users/newshortname. Then go to system preferences->accounts and create a new account with the short name newshortname. You'll get a popup saying that a home directory by that name already exists and asking if you want to use it. say yes.
    Anyway, I would like to migrate everything from account 1 to 2 and have all preferences...everything. I would also like to be able to delete the old account...account 1 and rename account 2. Since this is a home MAC, I really don't need it PW protected. I would like this MAC to just use my new account 2 at start up.
    Please ask me any questions. This is my editing MAC, and I can't get around inside the OS. I know FCP like the back of my hand, but don't want to screw up this computer.
    Thanks in advance.
    Message was edited by: Nelson May

    Yeah, you should be able to move most of it by changing permissions.
    Network settings could be any/all of these though for instance...
    /Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist
    /Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
    /Library/Preferences/SystemConfiguration/preferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
    /Library/Preferences/com.apple.sharing.firewall.plist
    /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
    /Library/Preferences/com.apple.networkConfig.plist
    /Library/Preferences/SystemConfiguration/com.apple.nat.plist
    /Library/Preferences/com.apple.print.FaxPrefs.plist
    As well as the old Keychain & cookies from your Browser.

  • How to move data from one account to another?

    Sheesh, I think I've created a monster for myself.  I got a new macbook pro and migrated my data from Time Machine.  As I was doing everything I didn't realize that the set up for the computer was in a different account than the migrated data went to.  So I have my main account on the computer and another account with all my emails, itunes pics etc. 
    I think the other account is considered the main account on the computer so just to make sure I have all my privileges etc, I want to transfer all this data into the main account.  Does that make sense? 
    I started figuring all of this out as a problem when my second account (the one with all my old data) could not download podcasts.  I can do that with the main account. 
    Anyway, can anybody tell me a simple way to transfer all of this?  Should I just try to start all over?
    Thanks!

    The Users -> shared folder is a common ground all accounts share.

  • Transferring mail from one account to another

    I have a mobileme account and I did use that for mail, I then switched to a personal domain and copied my mail over using the mail app, just dragged and dropped from one mail box to another.
    Now I want to put the mail back in mobile me, (storage issues), but for some reason certain emails give me this message The IMAP command “APPEND” (to INBOX) failed with server error: Message contains invalid header. This stop me form just selecting all and dragging back to mobile me
    They are both IMAP accounts and there is heaps of space on the mobile me account
    Any clues?

    Another option is to sign up for Verizon Your Domain via www.keepmyemail.com - This service is ~20/year and should allow you to keep your email addresses as long as you link them to it before cancelling your account.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • Transferring data from one table to another table using a Keycolumn using SSIS row by row dynamically

    Hi All,
    I have a Store Procedure(SP) which has a output variable name "AcivityID" which is the key column. In this SP, transformation  of data is done from one table to insert data into other table. I have to execute the SP and insert row by row data
    using the output variable "ActivityID"  whose value will keep on changing. How can I do it?
    Thanks,
    Kallu

    Value changing on a row by row basis? Not quite sure what you mean, but it seems that you want to use the results of an insert into one table as input for another. If so then SSIS is not needed, inside the stored proc use the SQL that will do that and for
    all records as
    INSERT A INTO dbo.table1
    OUTPUT INSERTED.A INTO MyTable;
    Arthur My Blog

  • Performance issue while transferring data from one itab to another itab

    hi experts,
    i have stored all the general material details in one internal table and description, valuation details of the meterial is stored in another internal table which is of standard table. now i need to tranfer all the data from these two internal tables into one final internal table but it is taking lot of time as it has to transfer lacs of data.
    i have declared the output table as shown below
    DATA:
      t_output TYPE standard TABLE
               OF type_output
               INITIAL SIZE 0
               WITH HEADER LINE.
    (according to the standard i have to declare like this and the two internal tables are declared similar to the above one)
    could somebody suggest me how shall I procced through this...
    thanks in advance....
    ragerds,
    Deepu

    Have a look at the following article which you may find useful:
      <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40729734-3668-2910-deba-fa0e95e2c541">Improving performance in nested loops</a>
    good luck, damian

  • Transferring data from one DB to another DB

    Hi Experts,
    In production database 30 tables are there in different schemas.
    In some tables data is existed for 5 years
    in some tables data is existed 8 years
    in some tables data is existed for 6 years.
    And all these tables are having billions and millions of records.
    Let us assume the tables in the production database are
    Table1 -- 8 years data -- No. Of Records 3538969000
    Table2 -- 6 years data -- No. Of Records  592844435
    Table3 -- 3 years data -- No. Of Records   33224993
    Table4 -- 4 years data -- No. Of Records   52361756
    Table5 -- 5 years data -- No. Of Records    8948567
    Table15 -- 6 years data -- No. Of Records 308476987Now I want to trnasfer these 15 tables data to test database.
    Based on the following conditions.
    For Table1 I want to transfer 6 years data to test database, keeep 2 years data in production
    and delete all 6 years data from production databse.
    For Table2 I want to transfer 4 years data to test database, keeep 2 years data in production
    and delete all 4 years data from production databse.
    For Table3 I want to transfer 2 years data to test database keeep 1 years data in production
    and delete all 2 years data from production databse.This will be done periodically.
    I.e. suppose if we run the script now and transfer the requested data to test database,
    again after one year the data got increased in production then again we have to run the
    script and transfer data to test database based on some conditions,so it should work for
    long time.
    Please help me what is the good and fast process to transfer the data.
    Thanks in advance.

    Thanks for your information.
    Hi ,
    To make the process dynamic why we want to make it dynamic in future any tables needs to e archived
    only one script should execute.
    I have created the below control table to pass ID, TABLE_NAME, ARCHIVE_TABLE_NAME, WHERE_CONDITION dynamically.
    ID  TABLE_NAME ARCHIVE_TABLE_NAME  WHERE_CONDITION
    1   Table1     archive_table1       created_date< MONTHS_BETWEEN(SYSDATE,-24)
    1   Table2     archive_table2    Accepted_date< MONTHS_BETWEEN(SYSDATE,-24)
    1   Table3     archive_table3    last_proposal_date< MONTHS_BETWEEN(SYSDATE,-24)
    1   Table4     archive_table4    lat_modified_date< MONTHS_BETWEEN(SYSDATE,-24)
    2   Table5     archive_table5       changed_date< MONTHS_BETWEEN(SYSDATE,-24)
    2   Table6     archive_table6    received_date< MONTHS_BETWEEN(SYSDATE,-24)
    3   Table7     archive_table7       send_date< MONTHS_BETWEEN(SYSDATE,-24)
    3   Table8     archive_table8       exact_date< MONTHS_BETWEEN(SYSDATE,-24)I want to pass ID from the JOB then the procedure should execute for all the tables with respective ID.
    this is my job
    DECLARE
      X NUMBER;
    BEGIN
      SYS.DBMS_JOB.SUBMIT
      ( job       => X
       ,what      => 'APPS.myprocedure(1);'
       ,next_date => to_date('24/12/2012 00:00:00','dd/mm/yyyy hh24:mi:ss')
       ,interval  => 'TRUNC(SYSDATE+1)'
       ,no_parse  => FALSE
      SYS.DBMS_OUTPUT.PUT_LINE('Job Number is: ' || to_char(x));
    COMMIT;
    END;
    For example if I pass the ID as '1' through job,then the procedure should execute for
    1   Table1     archive_table1       created_date< MONTHS_BETWEEN(SYSDATE,-24)
    1   Table2     archive_table2    Accepted_date< MONTHS_BETWEEN(SYSDATE,-24)
    1   Table3     archive_table3    last_proposal_date< MONTHS_BETWEEN(SYSDATE,-24)
    INSERT INTO archive_table1
    (SELECT * FROM Table1 WHERE created_date< MONTHS_BETWEEN(SYSDATE,-24));
    DELETE FROM Table1 WHERE created_date< MONTHS_BETWEEN(SYSDATE,-24));
    INSERT INTO archive_table2
    (SELECT * FROM Table2 WHERE created_date< MONTHS_BETWEEN(SYSDATE,-24));
    DELETE FROM Table2 WHERE created_date< MONTHS_BETWEEN(SYSDATE,-24));
    INSERT INTO archive_table3
    (SELECT * FROM Table3 WHERE created_date< MONTHS_BETWEEN(SYSDATE,-24));
    DELETE FROM Table3 WHERE created_date< MONTHS_BETWEEN(SYSDATE,-24));If I pass ID as 2 through job,then the procedure should execute for respective table names and where conditions.
    I have written the following code but it's not giving expected result.
    CREATE OR REPLACE PROCEDURE myprocedure (P_ID IN NUMBER)
    IS
       CURSOR C IS
          SELECT id, table_name,archive_table_name,where_condition FROM apps_global.control_ram WHERE id=p_id
          ORDER BY id,table_name;
    BEGIN
       FOR I IN C
       LOOP
    EXECUTE IMMEDIATE 'INSERT INTO '|| I.ARCHIVE_TABLE_NAME || '
    (SELECT * FROM '|| I.TABLE_NAME ||' WHERE '||I.WHERE_CONDITION||)';
    EXECUTE IMMEDIATE 'DELETE FROM ' ||I.TABLE_NAME|| ' WHERE '||I.WHERE_CONDITION||' ;
       END LOOP;
    END;
    END myprocedure;Please help me.
    Thanks in advance.

Maybe you are looking for