Help! Tried to lengthen the time of KP effect & everything stopped!
I am making a rather long iMovie with my family's old slides. I made a "draft" DVD, much shorter, with music, sound & video effects, my father's narration, & all chapter's (10 in all) marked, and it turned out well. I've got all my slides in the Timeline and I am in the process of going through adding mostly Ken Burns effects to about every 3rd one. I had hoped to put some transitions in between my chapters as well. I will then add my music & narration with a few sound effects. I went to lenthen 2 more chapter openings to 60 seconds which I need for the narration and the clips would not complete rendering. I went into iMovie trash and dragged the effected photo clips back to "clips" and the few that were not in the trash I re-imported from iPhoto into Clips. When I clicked on "show settings" the KB effect was not checked & as soon as I checked the box, each clip finished rendering except the 2 clips with the 60-second effects. I tried to "save project" and I got a message that said I had to wait until "56 clips complete rendering process". I waited for an hour and tried again and got the message "54 clips..." I was trying to "clear" the 2 clips and iMovie quit-and has been quitting for me every now and again ever since I started this final project (I've learned to Save as often as I can). Of course when I re-opened iMovie EVERYTHING I had done before was NOT done, including the clips that showed rendering complete. I had been emptying iMovie trash frequently, as recommended in iMovie Help, to save space and then I read all of the discussions regarding NOT to do that.
SO, where do I go from here? Why did these 2 clips get hung up rendering? (I had done 2 previously at the beginning of my movie). Is the length of 60 seconds the problem & would it be better to create several of the same clip with a transition? Why does iMovie keep quitting on me? My project is already about 1 hour and 45 minutes long (which I expected) & my husband (a film writer/producer) says I will probably have to burn to 2 DVD's. Any suggestions on this issue?
I really appreciate any help I can get as I have a deadline of 03/07/07!
Thank You, Marge
iMac Mac OS X (10.4.8) also have a iBook G4 & I do all the photo stuff on the iMac
reviewed other discussions
Similar Messages
-
I am trying to confirm the time at which a particular backup occurred using an external hard drive that I have since misplaced. Although time machine lists the backup times for some backups, it does not list them for all, including the one in question. Can someone help?
Okay, I've sussed it. I saw a link to another discussion that hadn't turned up in any of my searches before I posted the question above.
My Tosh HDD was formatted to FAT 32 and therefore would not be backed up by Time Machine. I removed all data from it - nightmare as I hadn't enough space to put it on the macbook HDD, but, after trawling through numerous photos and deleting rubbish for hours, I finally made enough space and copied all data across. Then, after clearing the data from the Tosh HDD, I used disk utilitity to reformat it to Mackintosh OS Extended. Chose the option without kournalling because I'm not baking up onto this disk and so don't need it - according to some other discussions I found.
When it was done I check on time machine in system prefs and once I selected options, I was able to remove it from the excluded from backups list. Hey presto. Now I'm moving my photo library and my music library onto the Tosh HDD and my macbook should start to breath again. Hurray. -
I'm trying to use the Time Warner modum with this wireles...
I'm trying to use the Time Warner modum with this wireless router (WRT54G ver 2). It shows I have to connect it to the modem, then from the modem connect the wireless. Their modem has just one outlet. Does anyone have any helpful ideas?
P.S. They will rent you a wireless router for $5 a month.Thanks! I tried that way, and now we realize that we must have a CD from them to load-up their IP info etc on the new laptop. I appreciate your short -- correct answer. I have gotten some, that are so complex; I can't understand anything they wrote.
-
I have already used time machine backup and I last used on june 2012 . Today when I tried to backup the time machine is still stuck on preparing my backup?What shallI do?
See Section C here > http://pondini.org/TM/Troubleshooting.html
From Here > http://pondini.org -
when typing,especially if I' m in a browser and trying to reply to some post. It's lagging as I type this, though not as bad as usual. Most of the time it is effectively useless it drops so many characters. Anyone else having this problem?
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
I am trying to use the Filter-Render-Lighting Effects tool but the Lighting Effects is in light grey and I can not access it can anyone help please?
Hi again is this what you are looking for?
Adobe Photoshop Version: 14.2.1 (14.2.1 20140207.r.570 2014/02/07:23:00:00)
x64
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE
Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 1796 MHz
Built-in memory: 3977 MB
Free memory: 1203 MB
Memory available to Photoshop: 3289 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=768, right=1366
OpenGL Drawing: Disabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=2052
gpu[0].RectTextureSize=16384
gpu[0].Renderer="Intel(R) HD Graphics 4000"
gpu[0].RendererID=358
gpu[0].Vendor="Intel"
gpu[0].VendorID=32902
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="10.18.10.3379"
gpu[0].Driver="igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10 iumd32"
gpu[0].DriverDate="20131218000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLPresent=1
gpu[0].OCLVersion="1.2 "
gpu[0].CUDASupported=0
gpu[0].OCLBandwidth=0
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.30 - Build 10.18.10.3379"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1447]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[96]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[64]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=0
License Type: Subscription
Serial number: 96040664679779475738
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\
Temporary file path: C:\Users\Trisha\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 452.3G, 51.7G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64
Bit)\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64
Bit)\Plug-ins\
Installed components:
ACE.dll ACE 2013/10/29-11:47:16 79.548223 79.548223
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdobeLinguistic.dll Adobe Linguisitc Library 7.0.0
AdobeOwl.dll Adobe Owl 2013/10/25-12:15:59 5.0.24 79.547804
AdobePDFL.dll PDFL 2013/10/29-11:47:16 79.508720 79.508720
AdobePIP.dll Adobe Product Improvement Program 7.0.0.1786
AdobeXMP.dll Adobe XMP Core 2013/10/29-11:47:16 79.154911 79.154911
AdobeXMPFiles.dll Adobe XMP Files 2013/10/29-11:47:16 79.154911
79.154911
AdobeXMPScript.dll Adobe XMP Script 2013/10/29-11:47:16 79.154911
79.154911
adobe_caps.dll Adobe CAPS 7,0,0,21
AGM.dll AGM 2013/10/29-11:47:16 79.548223 79.548223
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
aif_core.dll AIF 5.0 79.534508
aif_ocl.dll AIF 5.0 79.534508
aif_ogl.dll AIF 5.0 79.534508
amtlib.dll AMTLib (64 Bit) 7.0.0.249 BuildVersion: 7.0; BuildDate:
Thu Nov 14 2013 15:55:50) 1.000000
ARE.dll ARE 2013/10/29-11:47:16 79.548223 79.548223
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830
66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2013/10/29-11:47:16 79.548223 79.548223
BIBUtils.dll BIBUtils 2013/10/29-11:47:16 79.548223 79.548223
boost_date_time.dll DVA Product 7.0.0
boost_signals.dll DVA Product 7.0.0
boost_system.dll DVA Product 7.0.0
boost_threads.dll DVA Product 7.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.1.6.30929 2.1.6.30929
CITThreading.dll Adobe CITThreading 2.1.6.30929 2.1.6.30929
CoolType.dll CoolType 2013/10/29-11:47:16 79.548223 79.548223
dvaaudiodevice.dll DVA Product 7.0.0
dvacore.dll DVA Product 7.0.0
dvamarshal.dll DVA Product 7.0.0
dvamediatypes.dll DVA Product 7.0.0
dvaplayer.dll DVA Product 7.0.0
dvatransport.dll DVA Product 7.0.0
dvaunittesting.dll DVA Product 7.0.0
dynamiclink.dll DVA Product 7.0.0
ExtendScript.dll ExtendScript 2013/10/30-13:12:12 79.546835
79.546835
FileInfo.dll Adobe XMP FileInfo 2013/10/25-03:51:33 79.154511
79.154511
filter_graph.dll AIF 5.0 79.534508
icucnv40.dll International Components for Unicode
2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode
2011/11/15-16:30:22 Build gtlib_3.0.16615
imslib.dll IMSLib DLL 7.0.0.145
JP2KLib.dll JP2KLib 2013/10/29-11:47:16 79.248139 79.248139
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OMP Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r)
Fortran Compiler 12.0
LogSession.dll LogSession 2.1.2.1785
mediacoreif.dll DVA Product 7.0.0
MPS.dll MPS 2013/10/29-11:47:16 79.535029 79.535029
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
PatchMatch.dll PatchMatch 2013/10/29-11:47:16 79.542390 79.542390
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC CC
Plugin.dll Adobe Photoshop CC CC
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit)
4.2.0.36
PSArt.dll Adobe Photoshop CC CC
PSViews.dll Adobe Photoshop CC CC
SCCore.dll ScCore 2013/10/30-13:12:12 79.546835 79.546835
ScriptUIFlex.dll ScriptUIFlex 2013/10/30-13:12:12 79.546835
79.546835
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r)
Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 1, 2012,
1003
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 1,
2012, 1003
updaternotifications.dll Adobe Updater Notifications Library
7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 7.0.1.102
WRServices.dll WRServices Mon Feb 25 2013 16:09:10 Build 0.19078
0.19078
Required plug-ins:
3D Studio 14.2.1 (14.2.1 x001)
Accented Edges 14.2.1
Adaptive Wide Angle 14.2.1
Angled Strokes 14.2.1
Average 14.2.1 (14.2.1 x001)
Bas Relief 14.2.1
BMP 14.2.1
Camera Raw 8.4.1
Camera Raw Filter 8.4.1
Chalk & Charcoal 14.2.1
Charcoal 14.2.1
Chrome 14.2.1
Cineon 14.2.1 (14.2.1 x001)
Clouds 14.2.1 (14.2.1 x001)
Collada 14.2.1 (14.2.1 x001)
Color Halftone 14.2.1
Colored Pencil 14.2.1
CompuServe GIF 14.2.1
Conté Crayon 14.2.1
Craquelure 14.2.1
Crop and Straighten Photos 14.2.1 (14.2.1 x001)
Crop and Straighten Photos Filter 14.2.1
Crosshatch 14.2.1
Crystallize 14.2.1
Cutout 14.2.1
Dark Strokes 14.2.1
De-Interlace 14.2.1
Dicom 14.2.1
Difference Clouds 14.2.1 (14.2.1 x001)
Diffuse Glow 14.2.1
Displace 14.2.1
Dry Brush 14.2.1
Eazel Acquire 14.2.1 (14.2.1 x001)
Embed Watermark 4.0
Entropy 14.2.1 (14.2.1 x001)
Extrude 14.2.1
FastCore Routines 14.2.1 (14.2.1 x001)
Fibers 14.2.1
Film Grain 14.2.1
Filter Gallery 14.2.1
Flash 3D 14.2.1 (14.2.1 x001)
Fresco 14.2.1
Glass 14.2.1
Glowing Edges 14.2.1
Google Earth 4 14.2.1 (14.2.1 x001)
Grain 14.2.1
Graphic Pen 14.2.1
Halftone Pattern 14.2.1
HDRMergeUI 14.2.1
IFF Format 14.2.1
Ink Outlines 14.2.1
JPEG 2000 14.2.1
Kurtosis 14.2.1 (14.2.1 x001)
Lens Blur 14.2.1
Lens Correction 14.2.1
Lens Flare 14.2.1
Liquify 14.2.1
Matlab Operation 14.2.1 (14.2.1 x001)
Maximum 14.2.1 (14.2.1 x001)
Mean 14.2.1 (14.2.1 x001)
Measurement Core 14.2.1 (14.2.1 x001)
Median 14.2.1 (14.2.1 x001)
Mezzotint 14.2.1
Minimum 14.2.1 (14.2.1 x001)
MMXCore Routines 14.2.1 (14.2.1 x001)
Mosaic Tiles 14.2.1
Multiprocessor Support 14.2.1 (14.2.1 x001)
Neon Glow 14.2.1
Note Paper 14.2.1
NTSC Colors 14.2.1 (14.2.1 x001)
Ocean Ripple 14.2.1
Oil Paint 14.2.1
OpenEXR 14.2.1
Paint Daubs 14.2.1
Palette Knife 14.2.1
Patchwork 14.2.1
Paths to Illustrator 14.2.1
PCX 14.2.1 (14.2.1 x001)
Photocopy 14.2.1
Photoshop 3D Engine 14.2.1 (14.2.1 x001)
Photoshop Touch 14.0
Picture Package Filter 14.2.1 (14.2.1 x001)
Pinch 14.2.1
Pixar 14.2.1 (14.2.1 x001)
Plaster 14.2.1
Plastic Wrap 14.2.1
PNG 14.2.1
Pointillize 14.2.1
Polar Coordinates 14.2.1
Portable Bit Map 14.2.1 (14.2.1 x001)
Poster Edges 14.2.1
Radial Blur 14.2.1
Radiance 14.2.1 (14.2.1 x001)
Range 14.2.1 (14.2.1 x001)
Read Watermark 4.0
Reticulation 14.2.1
Ripple 14.2.1
Rough Pastels 14.2.1
Save for Web 14.2.1
ScriptingSupport 14.2.1
Shake Reduction 14.2.1
Shear 14.2.1
Skewness 14.2.1 (14.2.1 x001)
Smart Blur 14.2.1
Smudge Stick 14.2.1
Solarize 14.2.1 (14.2.1 x001)
Spatter 14.2.1
Spherize 14.2.1
Sponge 14.2.1
Sprayed Strokes 14.2.1
Stained Glass 14.2.1
Stamp 14.2.1
Standard Deviation 14.2.1 (14.2.1 x001)
STL 14.2.1 (14.2.1 x001)
Sumi-e 14.2.1
Summation 14.2.1 (14.2.1 x001)
Targa 14.2.1
Texturizer 14.2.1
Tiles 14.2.1
Torn Edges 14.2.1
Twirl 14.2.1
Underpainting 14.2.1
Vanishing Point 14.2.1
Variance 14.2.1 (14.2.1 x001)
Variations 14.2.1 (14.2.1 x001)
Water Paper 14.2.1
Watercolor 14.2.1
Wave 14.2.1
Wavefront|OBJ 14.2.1 (14.2.1 x001)
WIA Support 14.2.1 (14.2.1 x001)
Wind 14.2.1
Wireless Bitmap 14.2.1 (14.2.1 x001)
ZigZag 14.2.1
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Adobe Exchange
Installed TWAIN devices: NONE
On Tue, Feb 24, 2015 at 10:29 PM, Benjamin Root Photography < -
after renting a move and starting viewing I can not stop it and come back to in within the time frame. If i stop it it goes away not able to find it. Just like I did not rent it at all.
Hi,
We have rolled out a fix for this issue.
Please log off and log back in to your machine and the issue should be resolved automatically. In case that does not work, please manually run the msi installer posted here (may require reboot).
For details, please refer to the KB article here: Multiple RunOnce keys created 11.0.10 and 10.1.13 Acrobat | Reader
Please let us know if you still face any issues.
Thanks,
Ashu Mittal -
The update to Photo Effects (Lite) v 3.0.0 won't work. I've tried for several weeks without any result. I press the download button and it disappears, then reappears again. Can any one help, please?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ appstore.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. -
When entering an event in the calender the page scrolls up when trying to enter and adjust the time,how do you adjust thge time upwards without moving the page?
I see no direct connection.. a printer and the computer setup for internet are not related.
But it sounds like the router in the wife's office is now in the wrong mode..
If you have an existing main router replace the second router for a switch .. that is the easy way.
Otherwise you need to bridge the router if it has that option.. most do not. Or use wan bypass.. where you turn off the dhcp server in the router and fix its ip to match the range of the main router.. this is the hassle of using router as a switch.
BUT I am making a huge number of assumptions.
What I need is the full network layout.. a quick picture would help.
I need main modem.. main router.. (maybe same box or different).. make model and current IP address and how dhcp is setup.
I need secondary router.. if that is what it is, IP and settings.
I want the printer type and model. How it is connected.
BTW I much prefer to see a network printer plugged into the network rather than usb.. it is only a matter of sorting the IP settings and driver pointing to the network rather than local.
Or you should think of it as a broken washing machine and call the technician.. who could fix the whole lot in an hour. -
I keep trying to change the time my photo was taken in "file info" but the changes don't save
I have Elements 11 for Mac. I make the changes to the time, press okay, then save file and close. I re-open file, and the file info has reverted back to original time. Please help.
This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
or
Make sure that EVERY DETAIL is the same in every place you enter your information
-right down to how you spell and punctuate the parts of your name and address
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-email address https://forums.adobe.com/thread/1446019
-http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html -
Fellow FM Developers,
I have the FDK8 and have been using framemaker as a processor of templates. We have successfully written a program that uses the framemaker in a user account currently logged in. In other words, USER A logs in with their account on Computer A and processes files just fine. Now, we would like to set up a system where jobs are submitted by USER A and runs on a remote Computer B which processes the document and saves it as a PDF.
We want to make it so users can submit a job through a web service using the .NET framework. We have tried to do this, however we are failing on one crucial part of our development. I am trying to use the single most important (asynchronis) connectivity line:
F_ApiWinConnectSession( NULL, NULL, &ClassID );
This is because we want to have framemaker start in the background with this execution of this service. Unfortunately, without the GUI available this command fails. We have obviously created a Progid and it has been registered in the registry. We did this by runnning :
FrameMaker.exe /progid:FrameMaker.Automation.2 /auto
Can anyone help me with trying to get framemaker to run in a background. Is there a way to process the documents without have the GUI up and loaded and then have it process the document.
Your help is greatly appreciated,
AdamAdam,
The server license is more tuned to the type of output that you are creating, regardless of the number of users. If you are creating content from external sources and generating a PDF in an automated way via FM, then you need a server license (period).
Read your FM EULA carefully.
2.2. Limitations on Server and Network Use. You may install one copy of the Software on your Computer file server for the sole purpose of downloading and installing the Software onto other Computers within your internal network up to the Permitted Number, provided that the total number of users that are permitted to download and install the Software from such Computer file server, does not exceed the Permitted Number. Except as explicitly described above, no other network or server use is permitted under this license, including but not limited to, using the Software either directly or through commands, data or instructions from or to any other Computer, for internet or web hosting services or by any user not licensed to Use this copy of the Software through a valid license from Adobe. For the avoidance of doubt, this Agreement does not permit the Software to be Used in any batch-oriented environment where such Use of the software is to produce Postscript or PDF output from data originating from any other application, unless such Use is merely incidental to a Use clearly permitted by the license.To obtain rights for additional server, batch oriented or network licensing uses, you may purchase a license(s) for the FrameMaker® Server product. The FrameMaker Server product license is available for review at, http://www.adobe.com/products/eulas/main.html.
This has greatly impacted the database publishing side of things. If all of your content is completely created in FrameMaker, then you should be ok. However, if you create or get any content outside of FrameMaker and pass it through FM to make your documentation sets, then according to Adobe, you need to be using the FrameServer product (for creating the PDFs). -
Trying to get the time of analysis for tables in SAP
Hi all,
I'm using the update statistics command on some tables in my database.
The num_rows attribute in the user_tables is updated after that but the last_analyzed attribute is not updated correctly.
Does anyone know how ? or maybe a different way to get the time the table was analyzed ?
Thanks,
litalDear Lital,
Can you please specify the Database system you are using and the version?
Thanks
N.P.C -
Critical error while trying to call the time record app
Hello,
I just finished to configure ESS and would like to start the time recording.
Unfortunately I can only call the working time in the upper menu and the overview is shown. Pressing now the link to the time recording an critical error with an exception occurs:
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost. Please contact your system administrator.
The current statement requires a character-type data object., error key: RFC_ERROR_SYSTEM_FAILURE
Could someone give me an hint where to start looking for the problem?
Thx you in advance,
Vanessa
Edited by: Vanessa Martinez on Apr 17, 2009 12:06 PMThe whole exception looks like:
The current statement requires a character-type data object., error key: RFC_ERROR_SYSTEM_FAILURE
The current statement requires a character-type data object., error key: RFC_ERROR_SYSTEM_FAILURE:com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: The current statement requires a character-type data object., error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
at com.sap.xss.hr.cat.record.blc.RfcManager.rfcExecute(RfcManager.java:468)
at com.sap.xss.hr.cat.record.blc.RfcManager.init(RfcManager.java:822)
at com.sap.xss.hr.cat.record.blc.wdp.InternalRfcManager.init(InternalRfcManager.java:248)
at com.sap.xss.hr.cat.record.blc.FcCatRecordInterface.onInit(FcCatRecordInterface.java:344)
at com.sap.xss.hr.cat.record.blc.wdp.InternalFcCatRecordInterface.onInit(InternalFcCatRecordInterface.java:234)
at com.sap.xss.hr.cat.record.blc.wdp.InternalFcCatRecordInterface$External.onInit(InternalFcCatRecordInterface.java:484)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
at com.sap.xss.hr.cat.record.vac.calendar.VcCatCalendar.onInit(VcCatCalendar.java:251)
at com.sap.xss.hr.cat.record.vac.calendar.wdp.InternalVcCatCalendar.onInit(InternalVcCatCalendar.java:194)
at com.sap.xss.hr.cat.record.vac.calendar.VcCatCalendarInterface.onInit(VcCatCalendarInterface.java:162)
at com.sap.xss.hr.cat.record.vac.calendar.wdp.InternalVcCatCalendarInterface.onInit(InternalVcCatCalendarInterface.java:146)
at com.sap.xss.hr.cat.record.vac.calendar.wdp.InternalVcCatCalendarInterface$External.onInit(InternalVcCatCalendarInterface.java:222)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1288)
at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:355)
at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:548)
at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:592)
at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:864)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: The current statement requires a character-type data object., error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
at com.sap.xss.hr.cat.general.model.slim.CatsModelSlim.hrxss_Cat_Wd_Record(CatsModelSlim.java:221)
at com.sap.xss.hr.cat.general.model.slim.Hrxss_Cat_Wd_Record_Input.doExecute(Hrxss_Cat_Wd_Record_Input.java:137)
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
... 64 more -
I need to continuously acquire data from daqmx card, write into a file and at the same time corelate (in terms of time) the data with signals from other instruments. The current problem is that there is time delay during read and write data into buffer,thus causing misalignment of the data from multiple instruments. Is there a way to solve the delay? or Is there a way to mark the time of the data acquisition in the buffer? If I know the starting time (e.g. 0) of data acquisition and sampling rate (e.g. 1kHz), can I simply add 1ms to each data sample in the buffer? The current code is shown below.
void DataCollectionWin::ConnectDAQ()
DAQmxErrChk(DAQmxCreateTask ("", &taskHandle));
DAQmxErrChk(DAQmxCreateAIVoltageChan(taskHandle,"Dev1/ai0,Dev1/ai1,Dev1/ai2,Dev1/ai3,Dev1/ai4,Dev1/ai5,Dev1/ai16,Dev1/ai17,Dev1/ai18,Dev1/ai19,Dev1/ai20,Dev1/ai21,Dev1/ai6,Dev1/ai7,Dev1/ai22","",DAQmx_Val_Cfg_Default,-10.0,10.0,DAQmx_Val_Volts,NULL));
DAQmxErrChk(DAQmxCfgSampClkTiming(taskHandle,"",1000.0,DAQmx_Val_Rising,DAQmx_Val_ContSamps,60000));
DAQmxErrChk (DAQmxRegisterEveryNSamplesEvent(taskHandle,DAQmx_Val_Acquired_Into_Buffer,50,0,EveryNCallback,NULL));// Every 50 samples the EveryNSamplesEvent will be trigured, to reduce time delay.
DAQmxErrChk (DAQmxRegisterDoneEvent(taskHandle,0,DoneCallback,NULL));
DAQmxErrChk (DAQmxStartTask(taskHandle));
int32 CVICALLBACK EveryNCallback(TaskHandle taskHandle, int32 everyNsamplesEventType, uInt32 nSamples, void *callbackData)
DAQmxErrChk (DAQmxReadAnalogF64(taskHandle,50,10.0,DAQmx_Val_GroupByScanNumber,data,50*15,&read,NULL));
//memcpy(l_data,data,6000);
SetEvent(hEvent);
l_usstatus_e[0]=g_usstatus[0];// signals from other instruments that need to be corelated with the data from daq cards.
l_optstatus_e[0]=g_optstatus[0];
if( read>0 ) // write data into file
//indicator=1;
for (i=0;i<read;i++)
{ //fprintf(datafile,"%d\t",i);
fprintf(datafile,"%c\t",l_usstatus_s[0]);
fprintf(datafile,"%c\t",l_usstatus_e[0]);
fprintf(datafile,"%c\t",l_optstatus_s[0]);
fprintf(datafile,"%c\t",l_optstatus_e[0]);
fprintf(datafile,"%.2f\t",data[15*i]);
// sprintf( pszTemp, "%f", data[6*i]);
// pListCtrl->SetItemText(0, 2, pszTemp);
//pWnd->m_trackinglist.SetItemText(0, 2, pszTemp);
fprintf(datafile,"%.2f\t",data[15*i+1]);
fprintf(datafile,"%.2f\t",data[15*i+2]);Hello kgy,
It is a bit of a judgment call. You should just choose the board that you think has the most to do with your issue. For example, this issue was much more focused on setting up your data acquisition task than the Measurement Studio environment/tools, so the MultifunctionDAQ board would have been the best place for it. As for moving your post to another board, I do not believe that is possible.
Regards,
Dan King -
Is there any way to lengthen the time an iPhone rings?
Is there any way to extend the time of the ring tone? I have an iPhone 4 with IOS 7.
The ring duration is controlled by the carrier. Ask them.
Maybe you are looking for
-
Item Category Determination- Usage
Hi All, I am looking into my system configuration for item category determination. I know that Item category is determined based on 1. Sales document type 2. Item category group 3. Usage and 4. Higher level item cat group Here, I came to kno
-
Snow Leopard corrupted main Mac HD,..can't boot to it HELP Please!
Boy did I have a day today!! A couple of days ago, I achieved and re-installed OSX 10.5. Upgraded to 10.5.8. Then, I installed Snow Lep and upgraded to 10.6.2. Now, I did all of this in safe boot since at the time, my graphics card was broken. I got
-
How to capture the Escalation status in Human Task & Update in database
Hi, I have created a Workflow where I have a humantask. Here if the Approver Escalates the task, I want to capture this Workflow status and need to Update it in the our(Oracle) Database as Escalated. I am Updating the database as Approved when the Ap
-
Flash player and Win media player for iphone 3G?
There's any way to download an iphone 3G version of Flash player and Window media player. I am trying to hear a radio station on a web site but need those plugins to hear it. (www.lax.fm) Please let me know. Angel Message was edited by: Mundy KalEl
-
Which tuner? ExpressCar​d? or USB???
Just ordered my new laptop; the HDX 18T; should be here soon; comes without, however, the optional integrated TV tuner. So I wish to get some tuner. But I see there is this HP USB TV tuner .. and there also is the ExpressCard thing that goes in the s