Help! Trouble connecting RNP to 828mk2 and Garageband setup?

Okay, so we started trying to use the 828mk2 for recording today. We're setting levels for the two onboard preamps with no problem. We're still waiting on Logic in the mail so we're using Garageband presently. When it came to getting the levels for the RNP I got nothing when recording with GB. I tried as many things as I could think of. I'd refer to my 828mk2 manual but that is currently on it's way in the mail as well...how do I connect the RNP to the 828mk2? I tried running the mic into the xlr-in with phantom power engaged for my sm81 and cranked the gain until I heard it throught the phones. I ran the output into the 3rd input because the 1st and 2nd were being used on board(I also tried plugging it into the 1st, 2nd and 4th on back of the 828mk2 to no avail). I could hear it in the headphones but Garageband would not recognize the signal. I tried setting the input on GB to the matching inputs on the 828mk2 and tried other input settings- no signal getting to GB...What am I doing wrong? We really would like to fool around with some recording this weekend but it will be hard withough more than two preamps.
Also, this is funny; the first input, Channel A on the RNP, the phantom power button will not light up but it does on Channel B...?
I'm really confused PLease help!
Mac Pro Mac OS X (10.4.9)

I do have the preferences set for firewire MOTu 828mk2 Audio interface in and out of the computer. I then set the input on GB, (from the bottom right of the screen) to where I expect it should be recording from. When the RNP's output is hooked up to the 3rd line-in on the 828mk2 I choose, 'input: Channel 3(mono)'. If it's hooked up to the 1st line in input on the back I choose 'channel 1(mono)' and so. This worked for the two onboard preamps in the audio interface but won't for my outboard preamp(I apologize for not clarifying that the RNP was a preamp). What am I doing wrong?

Similar Messages

My new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help

my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging

my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging

Help ! - Connection between airport extreme and airport express

I have a home network with an iBook connecting wirelessly to an aiport extreme base station and an iMac connecting through an Airport Express, which has been configured as a relay to the base station (extending its range). The iMac is on the fourth/attic floor of my house; the iBook on the main floor.
The iMac has a printer attached to it; the iBook does not.
I have only intermittently been able to "see" the printer from my iBook and to print to it. Simiarly, i have only been intermittently been able to pull files from the iMac on to the iBook. I have no trouble connecting to the internet with either machine.
Why does the network keep dropping the airport-express-connected imac (and printer)? what can i do? help!

Sounds like an interferance problem to me. Do you have a cordless phone? You can try changing the channel on the AEBS or enable internet robustness.

Trouble connecting to wireless networks and slow connection.

For the past three weeks or so I've been experience difficulty connecting to networks I previously had no trouble connecting to. I'm only able to go about 15 feet or so away from a wireless router before my speed either drops through to the floor or the connection is lost entirely. I've tried looking through forums all over the internet, but I wondered if anybody had any insight into what I could do to get my wi-fi back up to speed?
Thanks!

Try the steps in the blog post How I fixed my dropping wireless Airport connection problem in Snow Leopard to see if any of them help.
Good Luck.

I have trouble connecting to internet explorer and with my office home and student 2010

I cannot connect to my internet explorer and I have trouble with my microsoft office home and student 2010 and when I look for a site with https at the beginning it won't connect

Hello popoos:
Have you tried restoring your Inernet Explorer? Ooen open your internet Explorer click on tools tab and then click on Internet Options click on delete let it delete ever thing. This will delete temporary files. After that click on Advance tab and then click on reset. Close it out and then reopen it. Now goto Tools- tab then click managed add on in that list that appears enable the adobe software listed your anti virus software, Your printer if you use it on line Microsoft tool bars. I dissabled the search helpers because I personly don't want extra trash appairing on my screen. Also enable the replayer if you use it. I dissable all the the rest of toolbars you do not have to. I disable them because Because bing is safer. Now try Microsoft Office it should work now. Intetnet Explorer setting have been reset now.

HELP Creating Connections in the ABAP and JAVA Environments

Hi good morning,
I have a problem and I would like your help.
I'm new at Abap and I'm trying to develop an application from ABAP to connect to an environment of java.
I watched how to do this in various forums and the help of SAP, but just as I have found make the connection.
In java I have already developed the server side and I have developed a ABAP function. But is not exactly how it works.
Can you give me an example of how to send data from the sap application to java? Or give me any manual please.
Thank you very much in advance
RAFA

Hi Rajesh,
You can not find no. of JCO connection fron ABAP Stack ......you have to login into JAVA Stack.
<b>
If useful ,Reward Points .</b>
Thanks,
Prashant.

Help on Connecting Laptop to desktop and router WRT610N

I just purchased a WRT610N and have loaded it to my desktop which is not wireless and connected it to my cable modem and then the router to the desktop so that I could get wireless internet to my wireless builtin Dell Laptop Insperion 1501. My laptop will shows my network I setup on the desk top and that there are 4 green bars excellant connection, but it will NOT connect to the INTERNET. How do I fix this?????? Please help me sooooooonnnnnnnn. Thanks so much.
Solved!
Go to Solution.

Try this,
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
2.4GHz Wireless Settings :
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...Make sure your Wireless Connection is st to Obtain IP Address automatically...

Please help me connect eMac, cable modem, and Airport Extreme Base Station

I connected Ethernet cord from cable modem to Airport Extreme Base Station and then another Ethernet cord from Airport Extreme Base Station to eMac, but I could not get internet access on my eMac that way. I'm only getting internet access by directly connecting eMac to cable modem. Can someone please help me with a step by step explanation of how to set these 3 machines up so that I can have internet access on both my eMac and, wirelessly, on my new MacBook. Thank you very much in advance.
eMac & MacBook Mac OS X (10.3)
eMac & MacBook Mac OS X (10.3)
eMac & MacBook Mac OS X (10.3)

jenngee, Welcome to the discussion area!
Ensure that you power off the cable modem for a minute or so when you switch it to another Ethernet device.
Ensure that you are connecting the WAN port of the AirPort Extreme base station (AEBS) to the cable modem. The eMac should connect to the LAN port.
The steps for setting this up can be found in the "Designing AirPort Networks" (direct PDF link) document. Look through that document and try to get it setup. Then return here if you have more questions. Don't forget to post what you tried and the issues you encountered.

Help! connections for the midi and audio cables for use with Apogee & Logic

Newbie to mac! A Basic question, I know.
I have:
Logic express 8
1 x Apogee Duet
1 x Midi in/out interface.
After my external sound module recieves the midi info stored in logic, it creats an audio signal.
QUESTION!
How do I... monitor this output with my audio recoded files in logic. so audio and midi (final mix) is played together, using the Duet?
I understand that a seperate mixer would do the job, i have one, but i need to keep the music making and recoding process as simple as possible, otherwise i get annoyed with lots of settings and things and give up... for another year!
All I wanna do is:
Record one real instrument at a time. these would be Guitar, Bass and Mic. (ok, simple connections with the duet.)
Record midi keyboard messages into logic, edit, quantise etc. rhave logic send the midi info out to my roland xv 5080, and route the audio out of the xv 5080 with the final mix.
(I dont know if this can be done with the Duet??)??
Whilst advoiding the use of a seperate hardwarwe mixer.
would i have been better going for the Ultralite or something?
Any help is much appreciated as i am struggling to get my head round the basics.

I understand that it can be done this way, but i will be continually swapping leads. Yes a mxer wuld solve this, bu would a cheapish mixer effect the sound quality of the duet?
could i use the digital output on roland and send to the imac's digital in? and at the same time record audio in logic. so basically this digital signal will go into imac into logic then be routed straight to the output that the duet is connected to? Would this work, is there a seting in logic where u can have more than 1 input and send this straight to the main outputs??
ooooo, maybe thats a possibility, just hought of that. dont know if it'll work though.
Thanks clanwork

Ever since i updated my phone to iOS.6 I have troubles connecting to the internet and the app store and iTunes app take longer to load

It keeps saying 'Unable to join' with my home internet and my work internet, i have forgotten both networks several times, but with my home one it keeps disconnecting with my work internet connection it connects but sometimes asks me to join then comes up ' Unable to join '
The App Store and iTunes takes ages to load, sometimes it is quicker without internet!!
I could get onto both of those apps quickly with the previous download, i current have iOS. 6
PLEASE HELP!!!!!!!

I have no more tricks up my sleeve other than maybe it is a firewall issue with your router.
You can tap or click on the heading below and read Apple's take on the issue. I really don't hold out much hope though that his kb article has any more to offer to you, but I am out of ideas now.
Can't connect to the iTunes Store
support.apple.com/kb/TS1368
Sep 21, 2012 – You may be completely unable to access the iTunes Store on your computer or iOS device. You might also see an alert message similar to one ...

HELP- trouble connecting to itunes from iphone 4s

Hey,
If anyone can help.
When i plug in my iphone to my computer itunes comes up but then it comes up with an error saying "This iphone cannot be used becausethe apple mobile device is not started" what does this mean ? I have tried downloading itunes again and still does not work. Have also adjusted my norton settings to allow for itunes and still nothing. Can anyone please help.
Thanks

You will need to connect your iPhone to your PC at some point to transfer your iTunes store account information over.
Still, the iTunes store on the phone will only work if the phone is connected to a WiFi network. 3g/Edge will not work.

I have trouble connecting to Apple store and Itunes with my Iphone 4s while my IPad just does it perfectly fine. What can I do?

Hi guys
for two days my beloved Iphone is just giving me headaches. I am trying to connect to AppStore and Itunes using my home wifi connection. It gets the signal, reads my mail, browses on the internet and gets my news but impossible to access Appstore, Itunes and Youtube. My Ipad is connected to the same wifi spot and does the job perfectly. Why is that and how can I get my Iphone back working.
I used at some point a VPN but it is not activated - Is it related ? what can I do? Do I need to reinitialize the device?
Thanks a lot!!!

Have you checked restrictions? Settings>General>Restrictions>YouTube, iTunes, Installing Apps, Deleting Apps>ON

For everybody having trouble connecting, turning on, charging and updating the Zen Vision

Wrorke wrote "Make sure you have your USB ports set to be on even if not in use.
Mine wouldn't charge on my laptop. Turned out the laptop was set to turn the USB ports off when they weren't being used.
To fix this on XP, go into the XP Control Panel/System/Hardware/Device Manager. Then open the USB devices (near bottom of list). For each hub, open the Properties/Power and set the option to not turn the power off when not in use.
I did this for each of the hubs listed.
Then my ZVM charged and is now working great")This should work on most computers except some Dells, Gateways, Custom Builds, and off brand computers. I had to turn off the usb emulator before the ZVM was recognized on my averatec(cheap) notebook. Before trying, you should try the step above. To Turn off the usb emulater, go into the setup menu that appears if you push f2 on one of the screens that come up after you restart your computer. I know its different in gatways. Look for usb emulation and turn it off, usually by following on screen directions.Message Edited by ebah4290 on 2-26-2006:38 AM
Message Edited by ebah4290 on 2-26-2006:39 AM

I just looked at my router (Belkin N+) and I think you might want to set your data encryption to AES+TKIP. This is, by the way, the default when encryption is set to WPA-PSK and WPA2-PSK on my router.
You need to be careful on password entry. The touch is case sensitive as well so if you miss one, it is not going to connect.
D-Link routers have been the source of a number of Apple and iPod touch connection issues. Just to be on the safe side, check and see if a firmware update is available. If there is one, install it.

New MacBook Air having trouble connecting to the network and staying connected

I have an iMac as my prime and a MacBook Air as my remote. My network is all Apple. If I close the lid on my MacBook Air it immediately disappears from finder as a shared resource. However, if on first run though I put it to sleep and then close the lid, it will remain on the network as a shared resource. From hereon in, I can just close the lid to put it to sleep and its fine.
If I restart either computer or both computers, I have to go through the first run routine again. What makes matters worse is I’m trying to do an 11pm Retrospect backup of the Air and if it gets lost from the network Retrospect is unable to find the device. I have to do a locate in Retrospect and then let it do its backup.
I think this putting it to sleep on first run and then closing the lid to maintain stability is just a workaround I accidentally discovered. I don’t think it should be working like this. I think if I just close the lid and let it sleep that way on first run it should remain on the network as a shared resource and I should continue to see it on my iMac in Finder but this isn’t the case.
I’m really looking for opinions on this issue, if others have experienced this and is there anything that can be done about it. I’ve got mixed messages from Apple Tech support but Retrospect tech support said I’m doing everything right. This to me seems like a bug in probably the software. The machine runs fine except for this one little quirk.
Kerry

Yes its ticked. I’ve worked at this for two weeks and have gone through every iteration I can think of. Apple said that it is normal that the lid has to be open to have the shared resource but as long as on first sleep I put it to sleep first then close the lid it remains in the iMacs finder Window as a shared resource. And I can open and close the lid from thereon in and it is always there as a shared resource and Retrospect can locate it for backups.

Please Help: Trouble with nested CASE statement and comparing dates

Please tell me why the query below is always returning the bold null even when the start_date of OLD is greater than or equal to the start_date of NEW.
What I want to do is get the difference of the start_dates of two statuses ( Start_date of OLD - Start_date of NEW) if
1. end_date of NEW is not null
2. start_date of OLD is greater than start_date of NEW
else return null.
select id,
case when max(end_date) keep (dense_rank last order by decode(request_wflow_status,'New',1,0),start_date) is null then
null
else
          case when max(decode(status,'OLD',start_date,null)) > max(decode(status,'NEW',start_date,null))
          then max(decode(status,'OLD',start_date,null)) - max(decode(status,'NEW',start_date,null))
else
null
end
end result
from cc_request_status where id =1
group by id;

Avinash,
Thank you for your help.. Here is a more description of my problem..
Here is a sample of data I have for a table with four columns (id,status,start_date,end_date)
What I need to do is to get difference of the start dates of the maximum available dates, if data is valid. The pseducode is as follows:
IF end_date of New status is null
THEN return null
ELSE
IF start_date of old >= start_date of new
THEN return (start_date of old - start_date of new)
ELSE return null
I used the following query but always return the bold null
select id,
(case when max(end_date) keep (dense_rank last order by decode(status,'new',1,0),start_date) is null then
null
else
          (case when max(decode(status,'old',start_date,null)) >=
          max(decode(status,'new',start_date,null))
          then max(decode(status,'old',start_date,null)) - max(decode(status,'new',start_date,null))
else
null
end)
end) result
from tbl where id =1
Based on the below sample, I expected to get the following result; 14-Mar-07 - 16-Feb-07 which is the difference of the maximum start_dates of the two statuses. However the query is not working.. Please help me.. Thank you..
Id    Status    start_date      end_date
1     new      03-Feb-07      07-Feb-07
1     new      16-Feb-07      21-Feb-07
1     old      '10-Mar-07      12-Mar-07
1     old      '14-Mar-07      16-Mar-07

Help! Trouble connecting RNP to 828mk2 and Garageband setup?

Similar Messages

Maybe you are looking for