HELP!!??? Trouble with PS CS-6 displaying/ producing grainy and pixelated images after being imported using PS Bridge and Camera-Raw 8.5
Help!??? I am having trouble with PS CS-6 displaying/ producing/ saving grainy pictures when import NEF files!!!
Hi all,
When I import all NEF or RAW files into CS6 from Bridge and Camera Raw from the Nikon D200 and D5000, they become grainy/ pixelated. However, RAW files from the D800 did not have problem. I set the Color Space in my Nikons to AdobeRGB, in PS Camera Raw 8.5 to AdobeRGB, in PS CS-6 ColorSpace to AdobeRGB, and Save As Jpeg with Max quality (12). When comparing between CS-6 produced file and the original, I can see a big drop in quality and the picture become grainy and pixelated. What can I do to make this right? Any help/ suggestion is appreciated.
Thank you!
HN
Can you show us a screen-shot of the raw in Camera Raw that shows this noise, or if you only see it in the saved JPG, then show us a side-by-side of the raw in Camera Raw and the JPG? Show the same area of the photo and zoom to 100%.
It is normal for raw photos to have grain but you can mostly remove it with the Luminance Noise-Reduction sliders in the Detail tab of Camera Raw.
The amount of grain depends on the ISO sensitivity setting on the camera.
Similar Messages
-
Trouble with mobile site. Displays for a second then screen goes black.
Trouble with mobile site. Displays for a second then screen goes black. Using safari, 4s on Verizon. Example: m.mlb.com/lad/
I hadn't checked the site since January or so, when it worked. It might be related to the Opening Weekend skin they have on the site, but for me, it shows the top part of the page for 3 seconds while it's loading (scrolling down is impossible) and then all of a sudden it turns black, showing nothing. It's that way for every MLB mobile site.
At first:
Two seconds later:
I noticed this on 4/7/12. Does anyone NOT have this problem?
Matt -
Help
I need any help i can get, im having trouble with the app find my iphone. I have lost my iphone, checked on the computer, and somehow, took it away so how do i get it back??If you are saying that after signing into iCloud it is telling you device is not found, it could be for any number of reasons. If the battery is dead, if the SIM has been removed, or if someone else has the phone and they have restored it, it will not be shown. Also, if you located it once and then sent a remote wipe, it disables the abililty to locate the phone with Find My iPhone.
-
"It is formatted incorrectly, or is not a format that iBooks can open". Can anyone help me with this message of a book that I purchased on iBooks, read, highlighted in the book and now I can't open it anymore. Please help!!!
Mine does the same thing occasionally, is your phone jailbroken? Sometimes it will work if you delete the book and reinstall it or put your phone into airplane mode then turn it back off.
-
First of all, I would have to say that getting in touch with you is a nightmare and I am not at all happy that I can't just email or live chat with someone who can help! I am not a technical person, I just want to be able to use Photoshop Elements and get on with it. I bought Photoshop Elements via Amazon some months ago and it worked fine. I then got a message that advised that the trial version would expire, which it subsequently has (I have been trawling your site for weeks and weeks trying to find an email or phone contact to get some assistance). Relucltantly, I am now typing this - and I suspect it will not help in the slightest! I bought the FULL not TRIAL edition of Photoshop Elements and I have contacted Amazon who confirmed this, but say I need to contact you. Can you please let me know how I can resolve this? Louise A Fraser
Hi Louise, sorry to hear of your problems. This is not Adobe. We are mainly support volunteers, other users like you, trying to help one another. You need to contact Adobe directly for activation and licencing issues. Click the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on. Don’t let them pass the buck. Stay connected and ask to speak with a supervisor if necessary.
Click here to get help now Contact Customer Care -
Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"
You could try duplicating the Domain.sites2 file and launch this in iWeb. Delete the last page you edited and try saving. If that doesn't work, undo and try deleting another and so on...
If you can find the problem page you would only have to rebuild it rather than the whole site.
The other possibility is to create a new site on the same domain file and drag each page in turn down to it from the top site and try to save each time. -
Since downloading the new operating system on my iPhone 4S, I'm having trouble with my phone messaging. I enter a number or input a number from my contacts and send my message. I then receive a error message stating the message can't be sent and it shows a set of "1s" were added in front of the number I entered. Ex: 1 (1) xxx-xxx-xxxx. Does anyone know why this is happening and how I can fix it?
I realize this. When calling prepaid cus service it only gives you the option to input your #. If you dont the system hangs up on you. When I input my number the system doesnt recognize it and hangs up on me.
-
I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please help?
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off and is no longer recognized by itunes.
thank you for your help.Hi there beni_m,
You may find the troubleshooting steps in the articles below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks. -
Why it is keep asking for Username and Password but i didn't use any username and password with my database. Please help me i m very frustrated right now please help anybody. I m new in this.,
Hi,
Please check below threads:
Crystal Report Layout asking for Login Info
SAP B1 ask for credentials to print or to preview Crystal Reports report -
My wife had an iPad for a year and synced to our computer with no problem. I recently received an ipad2 and when I tried to sync using separate apple and iTunes passwords, under her computer user name, it appears I over-road her account and synced all her apps with my apps on my iPad. I then set myself up as a new user on our computer and tried to sync. I now get the error that my iPad is synced to another library. How can I start over without erasing all my data on the iPad?
Go back to her login. Unless you deliberately erased apps, they should all be there, both yours and hers! Then, you need to set up each iPad separately. You will notice that they have separate names for that very purpose.
There is no problem with multiple Apple IDs on the same iTunes on the same computer except... Apps are permanently associated with the ID that was originally used to obtain them. If you choose to update an app from inside iTunes and you're logged into the "wrong" ID, you must log out and back in again.
On the bright side, you can configure either or both iPads to sync with apps and music and movies, etc. from either or both IDs. Further, if you choose to update the apps from the iPads themselves, there is no need to log out/in. The device handles that. All you need is the correct password. In my case, I use the same password for both IDs to make things easier. -
I am used to that when I open an image in Bridge it will be opened in PS, with all preferenses I have done to the image. Now it opens in PS but without any changes i have don e in Bridge. Also when I open a new image I want it to be opened in Camera Raw automatically, both if a Jpeg or Raw picture.
Using PS CC
Regards BOJ<moved from Adobe Creative Cloud to Bridge General Discussion>
-
My nef files used to open in camera raw 8.6. Now when I drag and drop they go straight to photoshop cs6. I don't have the option to edit them in the camera raw editor! Help!
Which operating system are you using?
What is your screen resolution set at? -
With Lightroom 4 I can't read any .DNG files directly into Photoshop CS. I have"camera raw 2.4" selected in LR and the Plug-in for CS is Camera Raw.8BI.
Any suggestions on what to do? Thanks.Welcome to the Apple Discussions. Have you tried a different DNG converter? Adobe released Adobe DNG Converter 5.3 in March of this year. Maybe, if it supports your camera, this version will create a more compatible file.
Maybe you are looking for
-
How do I upgrade music to DRM free so I can play on my Sonos?
How do I upgrade itune music to DRM free so I can play on my Sonos?
-
Hi experts, I am practicing in t-code F-28. First, I choose a bank account. Second, in post incoming payments process open items, I choose invoice to paid. Addition, I want to more 1item (tax: posting key = 50, account = tax), but I can't choose kind
-
Trying to change game center apple id and not working?
I have tried to change it to my newer 1 because my dad took my old one and isn't going to let me keep using it I managed to get him to tell me the password but he is going to change it at a later date. So i made a new account and added some money t
-
Empty Sent Message File in Mail
hi folks!. i'm having this problem: Mail doesn't show any of the sent messages i wrote. The sent messages file is there in user/library/mail/pop acount/sent messages and contains a copy of every mail i've written. anybody knows what's wrong? I'll app
-
Premiere Pro CS6 unexpectedly quits whilst opening windows
Oh wise ones! I am having trouble with a premiere project, it is a simple logging project with about 100 video files that has worked previously on an edit share based raid system, but today has decided it will not open & will not re-link media files