Help troubleshooting, please!...
Hi fellow Fios people,
It takes a little time to describe, but it is necessary to kno what I've tried
I have had FIos working on a desktop for over 6 months. This is connected directly to a dataport that runs down 1 floor to my basement where the router is located and the main hub leading to all the other 3 dataports in my home, as well as Fios TV. I bring home a wireless laptop from work that I set up in the kitchen (1 floor above the basement) and it connects just fine wirelessly.
Since my kids are getting older and we can't all share the same computer, I tried to add a desktop on the bedroom level, right where there is a dataport. When I connect it with an ethernet cable, there pops up a symbol in the lower right corner of the screen that says 'connected at 100mbs/second. But I can't get it to connect to the internet. Spent hours on my own, tried all the troubleshooting tips and downloading (on the working desktop) to a flash drive the Fios connection wizard, all to no effect. After being on hold for over 45 minutes, finally got a service guy at Fios who had me try to ping, with no luck. tried all avenues through the control panel and through wireless XP utilities. No luck. We switched cables at the router from the port that worked to the port that did not, my existing desktop reconnected no problem, but still no ping, no connection upstairs. He concluded that there is notheing he can do, no suggestions, that I must have a bad ethernet card.
Next day I have my laptop that works wirelessly in the kitchen. I bring it upstairs and use the ethernet cable to try to hardwire it. No luck, no connection. Then I try to connect wirelessly, no luck. When I open Show all available wireless connections, it detects my network with a good signal(4 bars, if that means anything) and everyone elses in the neiborhood with much wweaker signals. But no matter how may times I tell it to connect, it won't. So I pick up the laptop and start to walk downstairs with it. As I get halfway down the stairs, it connects without my even trying.
Okay, so thats the situation. With 4 bars of signal showing, I guess that is not strong enough to connect?? Why wouldn't the ethernet connection work? It shows in the lower right corner that it has a 100mb signal on both my laptop and my desktop? My pproblem is that I don't know if I need to get a new computer for the upstairs so that my kids can do work(becuase my old desktop is old, and may have a bad ethernet card, and I don't want to spend money making it wireless, do I? Is there such a thing as a range extender for the router, and does anyone think that will help, and how do you set that up?
Am I better of relocating my router to the center floor of my house by running an ethernet cable upstairs from the outside feed to the routher and then to my computer? BUt then my TV will get all screwed up because all the home runs are in the basement by the router? Customer Service has proven to be a waste of time with internet connection issues.
Suggestions, please! I know some of you out there are more technically savvy than I, and hopefully are willing to spend a little of your valuable time helping out a fellow Human trying to help his kids on a limited budget. I've seen a decent desktop at Staples by HP for only about $400, but there is no guarantee that will work unitl I know if this is a range problem, and how do I check my direct dataport upstairs?
Thanks, I'll shut up now.
Regards to all,
Jeff in River Edge
el3ment00 wrote:
Is your WAN Connection from your ONT wired for Coax or ethernet?
I can't exactly pinpoint the cause from your description.. And i'm sure tech support has had you power cycle everything to start off..
I am assuming since you have no connectivity to any of your clients, the router needs to be configured properly.
Are your computers all obtaining a LOCAL (192.168.x.x) IP address from your router?
Are you able to access Video On Demand on your TVs?
If you can connect locally, but can't surf out to the internet - then you need to make sure your broadband WAN(Wide area Network) connection (Either Coax or Ethernet - however the tech installed it) has an IP and is enabled.. Otherwise, you wont be able to get anywhere..
I'm not sure what an ONT is, but if its' the router;
The Ethernet WAN light is on, the COAX light is off, and there is only one COAX jack on the back of the router, and I'm 99% sure it is for Fios TV.
All other jacks on the back of the router are CAT5.
All other 'clients' are working, My main desktop in the office, my wireless laptop works in the basement and on the main level of the home, but will not connect upstairs where the 2nd desktop is located, which is the one I am trying to add to the system. Also, my laptop will not connect when hard wired to the same ethernet port.
Yes, all the working connections show a local address of 192.168 x x , but something peculiar is that the desktop that I can't connect was showing that it was connected but to a completely differnent address, which I don't recall. This desktop says that it is connected, I've gotten it as far as being able to ping, but not connect to the internet.
I dowmnloaded the Router Manual from Verizons site and followed the isntruction for logging into the router, and found that the connection I was truing to make was not enabled. I enabled it, but was unsure of what IP or DNS values to give it.
I have pdf screenshots of some of the configuartion pages, and would love to email them to someone who knows what they mean. I think there-in lies the problem.
One other thing, whenever I run the Fios connection wizard, it says that my connection from tje router to the computer is broken, that I have a bad wire, but I still get the 'connected at 100mbs message in the lower corner, and like I said, can ping out to the 192.168.x.x settings.
I have not done a reset for over a week or so, trying at the beginning to get the upsstairs desktop.
Thanks,
Jeff
Similar Messages
-
Troubleshooting BIS in BB storm 2 9550
My Blackberry Storm 2 9550 is not able to get EDGE on the phone so i am not able to use BIS it was previously on Verizon but I unlocked it.It was working properly but after six months of purchase.I am not able to register neither on vodafone server nor on blackberry or host routing table, service books are also not available.... I tried it with other sim cards of different service providers then to it is not working.I tried each and everything which service provider told like battery pull,restart,security wip etc.Please HEL ME
I"m not fully understanding the words you are posting, so let's see if I am interpreting correctly:
1) You have a VZW 9550
2) The 9550 is unlocked from VZW, as validated by this:
http://blackberryfaq.com/index.php/How_do_I_determine_if_my_BlackBerry_is_%22unlocked%22%3F
3) You have a SIM from Vodafone India, that you wish to use in the 9550, locally in India
4) It worked fine for 6 months on Vodafone India, but has recently stopped working
If I have that correct, here is what I suspect happened. When you unlocked it and put the Vodafone India SIM into it, it properly registered to Vodafone India. But, your BIS-level services did not get shut down from VZW. Sometimes this happens...a carrier may not immediately shut down your BIS services when you move onto a different carrier. And some carriers allow the BIS services to function, even though they are traversing to a different carrier. Once VZW caught up, they finally shut down your BIS service since you'd not been paying them for those services.
Consequently, what you now need to do is to get your BIS services working directly from Vodafone India. And that is where the challenge will lie. The 9550 is capable of both CDMA and GSM services...it has a multi-function radio. Clearly, since it was working via Vodafone India for those 6 months, you have it properly configured to operate on that network. But, until you can activate BIS services from the Vodafone India network, you will have no ability to receive BIS services from them.
If you indeed have a BIS-level account from Vodafone India, then that's only the first step in getting this working. The next step is obtaining the Service Books from Vodafone India (you previously had them from VZW, but when they shut down your BIS account, the Service Books were automatically removed from your BB). Even if the BIS account at Vodafone India is fully functional, the Service Books must still reside on the BB in order to actually use the service. And the Service Books come from the carrier. Most carriers will only deliver Service Books to BB models that they natively support...so if Vodafone India does not support the 9550, then they will not push the Service Books to you.
There are tedious and manual methods to obtain the necessary Service Books, but please first clarify if all of the above that I have written to you is accurate.
Oh...one more thing...are your voice-level services, from Vodafone India, working fine still?
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I would really appreciate some help with my search & results page that is now throwing up the following error:
Warning: mysql_free_result() expects parameter 1 to be resource, null given in...... line (the line number refers to the following code:
mysql_free_result($RSsearchforsale);
mysql_free_result($RsSearchForSale2);
mysql_free_result($RsSearchForSale3);
mysql_free_result($RsSearchForSale4);
I am new to php and am setting up a dynamic site in Dreamweaver (thanks to the Missing Manual – very helpful). I apologise in advanced for my lengthy description of the problem (perhaps get yourself a drink before continuing!)
I have a Search page with 4 list menus where the user can select an option from ANY or ALL of the menus, if a menu is not selected the value posted to the results page will be 'zzz'.
On the results page I have 4 recordsets, all getting the correct results, only one recordset is required to run depending on how many of the menus from the search page have been selected and a test is run before executing the sql using a SWITCH statement checking how many of the menus had passed the 'zzz' values from the Search page if you see what I mean. The results page has Repeating Regions, Recordset Paging and Display Record Count. The exact result that I require are generated by this method.
THE PROBLEM, when a user makes a selection the first page of 10 results is fine, but the error message above is shown at the bottom of the page, AND when the user clicks NEXT to go to the next page of results THERE ARE NO RESULTS.
This is exactly what happens depending on how many menus selected and which recordset is used:
4 menus selected from Search: runs RSsearchforsale, results correct but 3 error messages on 1st page relating to mysql_free_result($RsSearchForSale2),mysql_free_result($RsSearchForSale3), & mysql_free_result($RsSearchForSale4). The display record count shows correct results found. NEXT page is empty of results and still shows the correct display record count as if it should be displaying the records, also has the same 3 error messages.
3 menus selected from Search: runs RsSearchForSale2, results correct but 3 error messages on 1st page relating to mysql_free_result($RSsearchforsale),mysql_free_result($RsSearchForSale3), & mysql_free_result($RsSearchForSale4). The display record count shows correct number of results. NEXT page shows results from the DEFAULT setting of the recordset and the Display record count reflects this new set of results. Also still shows the 3 mysql_free_results for RsSearchForSale2, 3 and 4.
2 menus selected from Search: runs RsSearchForSale3, results correct but 2 error messages on 1st page relating to mysql_free_result($RSsearchforsale) & mysql_free_result (RsSearchForSale4). The display record count is correct. NEXT page does exactly the same as described in above 3 menus selected.
1 menu selected from search: runs RsSearchForSale4, results correct but 1 error meaasge on 1st page, mysql_free_result($RSsearchforsale). Display record count is correct and again when NEXT page is selected does as described in above where 2 or 3 menus selected.
If you have gotten this far without falling asleep then thank you and well done! I have pasted my code below and I know its a lot to ask but please please can you give me an idea as to where or why I have gone wrong. I felt I was so close at perfecting this search and have been working on it for weeks now. I feel sure the problem is because I have 4 recordsets on the page but I could find no other way to get the exact results I wanted from the menus.
Looking forward to any help.
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RSsearchforsale = 10;
$pageNum_RSsearchforsale = 0;
if (isset($_GET['pageNum_RSsearchforsale'])) {
$pageNum_RSsearchforsale = $_GET['pageNum_RSsearchforsale'];
$startRow_RSsearchforsale = $pageNum_RSsearchforsale * $maxRows_RSsearchforsale;
$varloc_RSsearchforsale = "mpl";
if (isset($_POST['location'])) {
$varloc_RSsearchforsale = $_POST['location'];
$vartype_RSsearchforsale = "vil";
if (isset($_POST['type'])) {
$vartype_RSsearchforsale = $_POST['type'];
$varprice_RSsearchforsale = "pr9";
if (isset($_POST['price'])) {
$varprice_RSsearchforsale = $_POST['price'];
$varbed_RSsearchforsale = "b5";
if (isset($_POST['beds'])) {
$varbed_RSsearchforsale = $_POST['beds'];
switch (true) {
case ($varloc_RSsearchforsale != 'zzz' && $vartype_RSsearchforsale != 'zzz' && $varprice_RSsearchforsale != 'zzz' && $varbed_RSsearchforsale != 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RSsearchforsale = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE location=%s AND price=%s AND type=%s AND beds=%s ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc_RSsearchforsale, "text"),GetSQLValueString($varprice_RSsearchforsale, "text"),GetSQLValueString($vartype_RSsearchforsale, "text"),GetSQLValueString($varbed_RSsearchforsale, "text"));
$query_limit_RSsearchforsale = sprintf("%s LIMIT %d, %d", $query_RSsearchforsale, $startRow_RSsearchforsale, $maxRows_RSsearchforsale);
$RSsearchforsale = mysql_query($query_limit_RSsearchforsale, $propertypages) or die(mysql_error());
$row_RSsearchforsale = mysql_fetch_assoc($RSsearchforsale);
if (isset($_GET['totalRows_RSsearchforsale'])) {
$totalRows_RSsearchforsale = $_GET['totalRows_RSsearchforsale'];
} else {
$all_RSsearchforsale = mysql_query($query_RSsearchforsale);
$totalRows_RSsearchforsale = mysql_num_rows($all_RSsearchforsale);
$totalPages_RSsearchforsale = ceil($totalRows_RSsearchforsale/$maxRows_RSsearchforsale)-1;
$queryString_RSsearchforsale = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
if (stristr($param, "pageNum_RSsearchforsale") == false &&
stristr($param, "totalRows_RSsearchforsale") == false) {
array_push($newParams, $param);
if (count($newParams) != 0) {
$queryString_RSsearchforsale = "&" . htmlentities(implode("&", $newParams));
$queryString_RSsearchforsale = sprintf("&totalRows_RSsearchforsale=%d%s", $totalRows_RSsearchforsale, $queryString_RSsearchforsale); } ?>
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RsSearchForSale2 = 10;
$pageNum_RsSearchForSale2 = 0;
if (isset($_GET['pageNum_RsSearchForSale2'])) {
$pageNum_RsSearchForSale2 = $_GET['pageNum_RsSearchForSale2'];
$startRow_RsSearchForSale2 = $pageNum_RsSearchForSale2 * $maxRows_RsSearchForSale2;
$varloc2_RsSearchForSale2 = "mpl";
if (isset($_POST['location'])) {
$varloc2_RsSearchForSale2 = $_POST['location'];
$varprice2_RsSearchForSale2 = "p9";
if (isset($_POST['price'])) {
$varprice2_RsSearchForSale2 = $_POST['price'];
$vartype2_RsSearchForSale2 = "vil";
if (isset($_POST['type'])) {
$vartype2_RsSearchForSale2 = $_POST['type'];
$varbed2_RsSearchForSale2 = "b5";
if (isset($_POST['beds'])) {
$varbed2_RsSearchForSale2 = $_POST['beds'];
switch (true) {
case ($varloc2_RsSearchForSale2 == 'zzz'):
case ($varprice2_RsSearchForSale2 == 'zzz'):
case ($vartype2_RsSearchForSale2 == 'zzz'):
case ($varbed2_RsSearchForSale2 == 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RsSearchForSale2 = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE (location=%s AND price=%s AND type=%s) OR (location=%s AND price=%s AND beds=%s) OR (location=%s AND type=%s AND beds=%s) OR (price=%s AND type=%s AND beds=%s) ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc2_RsSearchForSale2, "text"),GetSQLValueString($varprice2_RsSearchForSale2, "text"),GetSQLValueString($vartype2_RsSearchForSale2, "text"),GetSQLValueString($varloc2_RsSearchForSale2, "text"),GetSQLValueString($varprice2_RsSearchForSale2, "text"),GetSQLValueString($varbed2_RsSearchForSale2, "text"),GetSQLValueString($varloc2_RsSearchForSale2, "text"),GetSQLValueString($vartype2_RsSearchForSale2, "text"),GetSQLValueString($varbed2_RsSearchForSale2, "text"),GetSQLValueString($varprice2_RsSearchForSale2, "text"),GetSQLValueString($vartype2_RsSearchForSale2, "text"),GetSQLValueString($varbed2_RsSearchForSale2, "text"));
$query_limit_RsSearchForSale2 = sprintf("%s LIMIT %d, %d", $query_RsSearchForSale2, $startRow_RsSearchForSale2, $maxRows_RsSearchForSale2);
$RsSearchForSale2 = mysql_query($query_limit_RsSearchForSale2, $propertypages) or die(mysql_error());
$row_RsSearchForSale2 = mysql_fetch_assoc($RsSearchForSale2);
if (isset($_GET['totalRows_RsSearchForSale2'])) {
$totalRows_RsSearchForSale2 = $_GET['totalRows_RsSearchForSale2'];
} else {
$all_RsSearchForSale2 = mysql_query($query_RsSearchForSale2);
$totalRows_RsSearchForSale2 = mysql_num_rows($all_RsSearchForSale2);
$totalPages_RsSearchForSale2 = ceil($totalRows_RsSearchForSale2/$maxRows_RsSearchForSale2)-1;
$queryString_RsSearchForSale2 = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
if (stristr($param, "pageNum_RsSearchForSale2") == false &&
stristr($param, "totalRows_RsSearchForSale2") == false) {
array_push($newParams, $param);
if (count($newParams) != 0) {
$queryString_RsSearchForSale2 = "&" . htmlentities(implode("&", $newParams));
$queryString_RsSearchForSale2 = sprintf("&totalRows_RsSearchForSale2=%d%s", $totalRows_RsSearchForSale2, $queryString_RsSearchForSale2);
}?>
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RsSearchForSale3 = 10;
$pageNum_RsSearchForSale3 = 0;
if (isset($_GET['pageNum_RsSearchForSale3'])) {
$pageNum_RsSearchForSale3 = $_GET['pageNum_RsSearchForSale3'];
$startRow_RsSearchForSale3 = $pageNum_RsSearchForSale3 * $maxRows_RsSearchForSale3;
$varloc3_RsSearchForSale3 = "mpl";
if (isset($_POST['location'])) {
$varloc3_RsSearchForSale3 = $_POST['location'];
$varprice3_RsSearchForSale3 = "p9";
if (isset($_POST['price'])) {
$varprice3_RsSearchForSale3 = $_POST['price'];
$vartype3_RsSearchForSale3 = "vil";
if (isset($_POST['type'])) {
$vartype3_RsSearchForSale3 = $_POST['type'];
$varbed3_RsSearchForSale3 = "b5";
if (isset($_POST['beds'])) {
$varbed3_RsSearchForSale3 = $_POST['beds'];
switch (true) {
case ($varloc3_RsSearchForSale3 == 'zzz' && $varprice3_RsSearchForSale3 == 'zzz'):
case ($varprice3_RsSearchForSale3 == 'zzz' && $vartype3_RsSearchForSale3 == 'zzz'):
case ($vartype3_RsSearchForSale3 == 'zzz' && $varbed3_RsSearchForSale3 == 'zzz' ):
case ($varbed3_RsSearchForSale3 == 'zzz' && $varloc3_RsSearchForSale3 == 'zzz'):
case ($varloc3_RsSearchForSale3 == 'zzz' && $vartype3_RsSearchForSale3 == 'zzz'):
case ($varprice3_RsSearchForSale3 == 'zzz' && $varbed3_RsSearchForSale3 == 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RsSearchForSale3 = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE (location=%s AND price=%s) OR (location=%s AND type=%s) OR (location=%s AND beds=%s) OR ( type=%s AND beds=%s) OR (price=%s AND type=%s) OR (price=%s AND beds=%s) ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc3_RsSearchForSale3, "text"),GetSQLValueString($varprice3_RsSearchForSale3, "text"),GetSQLValueString($varloc3_RsSearchForSale3, "text"),GetSQLValueString($vartype3_RsSearchForSale3, "text"),GetSQLValueString($varloc3_RsSearchForSale3, "text"),GetSQLValueString($varbed3_RsSearchForSale3, "text"),GetSQLValueString($vartype3_RsSearchForSale3, "text"),GetSQLValueString($varbed3_RsSearchForSale3, "text"),GetSQLValueString($varprice3_RsSearchForSale3, "text"),GetSQLValueString($vartype3_RsSearchForSale3, "text"),GetSQLValueString($varprice3_RsSearchForSale3, "text"),GetSQLValueString($varbed3_RsSearchForSale3, "text"));
$query_limit_RsSearchForSale3 = sprintf("%s LIMIT %d, %d", $query_RsSearchForSale3, $startRow_RsSearchForSale3, $maxRows_RsSearchForSale3);
$RsSearchForSale3 = mysql_query($query_limit_RsSearchForSale3, $propertypages) or die(mysql_error());
$row_RsSearchForSale3 = mysql_fetch_assoc($RsSearchForSale3);
if (isset($_GET['totalRows_RsSearchForSale3'])) {
$totalRows_RsSearchForSale3 = $_GET['totalRows_RsSearchForSale3'];
} else {
$all_RsSearchForSale3 = mysql_query($query_RsSearchForSale3);
$totalRows_RsSearchForSale3 = mysql_num_rows($all_RsSearchForSale3);
$totalPages_RsSearchForSale3 = ceil($totalRows_RsSearchForSale3/$maxRows_RsSearchForSale3)-1;
$queryString_RsSearchForSale3 = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
if (stristr($param, "pageNum_RsSearchForSale3") == false &&
stristr($param, "totalRows_RsSearchForSale3") == false) {
array_push($newParams, $param);
if (count($newParams) != 0) {
$queryString_RsSearchForSale3 = "&" . htmlentities(implode("&", $newParams));
$queryString_RsSearchForSale3 = sprintf("&totalRows_RsSearchForSale3=%d%s", $totalRows_RsSearchForSale3, $queryString_RsSearchForSale3);
} ?>
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RsSearchForSale4 = 10;
$pageNum_RsSearchForSale4 = 0;
if (isset($_GET['pageNum_RsSearchForSale4'])) {
$pageNum_RsSearchForSale4 = $_GET['pageNum_RsSearchForSale4'];
$startRow_RsSearchForSale4 = $pageNum_RsSearchForSale4 * $maxRows_RsSearchForSale4;
$varloc4_RsSearchForSale4 = "mpl";
if (isset($_POST['location'])) {
$varloc4_RsSearchForSale4 = $_POST['location'];
$vartype4_RsSearchForSale4 = "vil";
if (isset($_POST['type'])) {
$vartype4_RsSearchForSale4 = $_POST['type'];
$varprice4_RsSearchForSale4 = "p9";
if (isset($_POST['price'])) {
$varprice4_RsSearchForSale4 = $_POST['price'];
$varbed4_RsSearchForSale4 = "b5";
if (isset($_POST['beds'])) {
$varbed4_RsSearchForSale4 = $_POST['beds'];
switch (true) {
case ($varloc4_RsSearchForSale4 == 'zzz' && $vartype4_RsSearchForSale4 =='zzz' && $varprice4_RsSearchForSale4 == 'zzz'):
case ($varloc4_RsSearchForSale4 == 'zzz' && $varprice4_RsSearchForSale4 =='zzz' && $varbed4_RsSearchForSale4 == 'zzz'):
case ($varloc4_RsSearchForSale4 == 'zzz' && $varbed4_RsSearchForSale4 =='zzz' && $vartype4_RsSearchForSale4 == 'zzz'):
case ($varbed4_RsSearchForSale4 == 'zzz' && $vartype4_RsSearchForSale4 =='zzz' && $varprice4_RsSearchForSale4 == 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RsSearchForSale4 = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE location=%s OR price=%s OR type=%s OR beds=%s ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc4_RsSearchForSale4, "text"),GetSQLValueString($varprice4_RsSearchForSale4, "text"),GetSQLValueString($vartype4_RsSearchForSale4, "text"),GetSQLValueString($varbed4_RsSearchForSale4, "text"));
$query_limit_RsSearchForSale4 = sprintf("%s LIMIT %d, %d", $query_RsSearchForSale4, $startRow_RsSearchForSale4, $maxRows_RsSearchForSale4);
$RsSearchForSale4 = mysql_query($query_limit_RsSearchForSale4, $propertypages) or die(mysql_error());
$row_RsSearchForSale4 = mysql_fetch_assoc($RsSearchForSale4);
if (isset($_GET['totalRows_RsSearchForSale4'])) {
$totalRows_RsSearchForSale4 = $_GET['totalRows_RsSearchForSale4'];
} else {
$all_RsSearchForSale4 = mysql_query($query_RsSearchForSale4);
$totalRows_RsSearchForSale4 = mysql_num_rows($all_RsSearchForSale4);
$totalPages_RsSearchForSale4 = ceil($totalRows_RsSearchForSale4/$maxRows_RsSearchForSale4)-1;
$queryString_RsSearchForSale4 = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
if (stristr($param, "pageNum_RsSearchForSale4") == false &&
stristr($param, "totalRows_RsSearchForSale4") == false) {
array_push($newParams, $param);
if (count($newParams) != 0) {
$queryString_RsSearchForSale4 = "&" . htmlentities(implode("&", $newParams));
$queryString_RsSearchForSale4 = sprintf("&totalRows_RsSearchForSale4=%d%s", $totalRows_RsSearchForSale4, $queryString_RsSearchForSale4);
}?>Hi David,
Thank you for your reply and patience, we are getting closer in spite of me!
Of course i needed to change the name of the recordset, i did that the first time i did it (when i got the error), the when i re did it i forgot, in my defense i was also trying to get a full understanding of the code using the W3Schools php reference and writing by the side of the code on a piece of paper what it meant in English.
Anyway after re doing the code correctly it still displayed all the records of my database but i realised that was because i was POSTING from the search form and when i changed it to the GET method I now get results when all 4 list menus are selected from and the paging works. After reading about the POST / GET method i chose the POST option, is the GET method a better option in my circumstance?
On my site now if the user selects from 1,2 or 3 of the menus rather than selecting the relevant records it displays the NO RESULT page, I would like my users to be able to select from all of the menus or ANY combination of the menus and find exact results for their search, for example if they only select a location and a price i want it display all records that match that location and price with any number of bedrooms and any Type of property: Perhaps this is due to how my list menus are set up, for each menu the first Item label is Location (or Beds or Type or Price) and the value i have left blank which i believe means that it will use the item label as the value, the second Item label for all menus is Any and again the value has been left blank. All other item labels have values relevant to database records.
I do look forward to your reply and cannot thank you enough for following this through with me, please continue to bare with me just a little more,
best regards
Tessimon
Date: Wed, 11 Nov 2009 06:56:24 -0700
From: [email protected]
To: [email protected]
Subject: Help with message please: Warning: mysql_free_result() expects parameter 1 to be resource, null given in...... line
You're not adding the WHERE clause to the SQL query. My example code uses $query_search. You need to change that variable to match the name of your recordset, i.e. $query_RSsearchforsale.
Moreover, the WHERE clause needs to go before ORDER BY.
$query_RSsearchforsale = "SELECT trueprice,`desc`, `propid`, `bathrooms`, `location`, `type`, `price`, `beds`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid ";
// Set a flag to indicate whether the query has a WHERE clause
$where = false;
// Loop through the associatiave array of expected search values
foreach ($expected as $var => $type) {
if (isset($_GET[$var])) {
$value = trim(urldecode($_GET[$var]));
if (!empty($value)) {
// Check if the value begins with > or <
// If so, use it as the operator, and extract the value
if ($value[0] == '>' || $value[0] == '<') {
$operator = $value[0];
$value = ltrim(substr($value, 1));
} elseif (strtolower($type) != 'like') {
$operator = '=';
// Check if the WHERE clause has been added yet
if ($where) {
$query_RSsearchforsale .= ' AND ';
} else {
$query_RSsearchforsale .= ' WHERE ';
$where = true;
// Build the SQL query using the right operator and data type
$type = strtolower($type);
switch($type) {
case 'like':
$query_RSsearchforsale .= "`$var` LIKE " . GetSQLValueString('%' .
$value . '%', "text");
break;
case 'int':
case 'double':
case 'date':
$query_RSsearchforsale .= "`$var` $operator " .
GetSQLValueString($value, "$type");
break;
default:
$query_RSsearchforsale .= "`$var` = " . GetSQLValueString($value,
"$type");
$query_RSsearchforsale .= ' ORDER BY detailstable.trueprice ASC';
> -
Recently i updated my the itunes but after doing so although it would open on my computer for a bit, it wouldn't recognise it - ie, syncing phone or I could open the program but when trying to redeem a gift voucher it didn't recognise the program on my PC and suggested i install it!. Today it wouldn't open at all so I tried to uninstalled it so i could reinstall it from scratch but now it won't re-install but just takes me to 'thank you' page.
- help to reinstall please...Hey Elaine07!
I have an article here that can help you with that issue. This article will help you make sure you have uninstalled iTunes correctly and help you troubleshoot the launch issues you are seeing:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
Please help me! My MacBook was stolen along with an external hard drive that had all my photos of my children on them. I hadn't backed to iCloud or backed anywhere else. I am distraught. No find my mac either...help...please... Some programmes are still running like drop of and Skype... Is it all over?!?
Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think? -
I have os 10.5.8 software on my mac and I need to update the software on my mac so I can update my iphone 4s, every time I try to update my mac with the 6.0 it says it doesn't need any updates, but my mac still has 10.5.8.... any help?? Please...
You must first buy Snow Leopard from Apple: 800-MY-APPLE (in the US)
Make sure your system meets Snow Leopard's requirements:
Mac OS X 10.6 "Snow Leopard" System Requirements
To install Snow Leopard for the first time, you must have a Mac with:
An Intel processor
An internal or external DVD drive, or DVD or CD Sharing
At least 1 GB of RAM (additional RAM is recommended)
A built-in display or a display connected to an Apple-supplied video card supported by your computer
At least 5 GB of disk space available, or 7 GB of disk space if you install the developer tools -
i have lost all my notes saved on my iphone after syncing it. and my default mailbox is gmail. notes were very important. and now i dont know how to get them back. can anyone help me out please? thanks in advance.
Try this ..
On your Mac open System Preferences > iCloud
Deselect the box next to: Notes
Then reselect it.
Give iCloud a few minutes to re sync the data.
Other than that, try Time Machine > http://pondini.org/TM/15m.html -
Hi, I getting a "playback error message" on youtube App. I tried to reinstall the app and to reset and restore the device and all these things didn't help.can you please help me
That's a peculiar one to get in the context of a QuickTime uninstall.
Which particular version of QuickTime for Windows are you currently running? (7.7.5, 7.7.4, something earlier?) -
Hello, i currently acquired a Mac Book Pro and running Mac Os X 10.8.3, but i have failed to get the driver for my canon inkjet printer. could anyone help me out please? Thank you
You may be able to download it fom here:
Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US -
HELP!! Please - Connecting a nano to an old PC
My parents have bought my little sister an iPod nano for Christmas. However their computer runs Windows Millenium Edition and when I tried to download and install iTunes for her to put music on her iPod I got an error message saying that iTunes only works on Windows 2000 or XP.
I use a Mac and could put some songs on her iPod from my iTunes library for the time being but I will be leaving after Christmas so she won't have any way to store or update the music.
Does anyone know a way round this? Is there an old version of iTunes that I can install on a Millenium edition computer. My sister is devastated and my parents are furious that no-one suggested to them that the nano might not just plug and play with their computer.
Help!! Please!
iPod Nano Windows METhanks, it looks like some of the other software might do the job. I'll download the free trials and see if I can get one of them working. If it does then I'll have to buy the software for her. I wasn't aware that iPods worked with anything other than iTunes.
My parents are not particularly technically aware - they have a computer with a broadband connection which as far as they were concerned, was all that was needed to use an iPod and download songs. At no point did any saleperson ask them anything about operating systems. They didn't even ask if they had an internet connection to download iTunes. However, this is more of an issue with the customer service of the shop that sold it to them, rather than Apple.
So, thanks for the suggestion, I'll give it a try. -
I have what appears to be
"2 o_o"
in between my battery charge indicator and the time... it won't go away, i have no notifcations left unchecked or voicemails..
Also I deleted my E-mail address because I thought that's why my fb wasn't working so I could re-add it and now it won't let me re-add it because it says my password is invalid, which it is NOT as I double checked it on gmail.com.
Help me anyone?Hello,
That first one is a voice mail indicator, and is controlled by your carrier. If you truly have no VM's yet the symbol is still there, try these steps:
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Also try calling, from another phone, your mobile number...leave a VM. Wait for the indicator to change (likely to 3) and then call your VM and delete that new test message.
If it still is a problem, call your carrier to see if they have something amiss on their side.
The second one is likely a typo or something. Be very careful with the password on the device...it is very very easy to have a key modifier (e.g., alt, caps, etc.) in place yet not know it. Watch the characters on the screen...they should stay clear for a moment before changing to *'s.
If that fails, you can use your carriers BIS website (from a PC/browser) to configure the email:
http://na.blackberry.com/eng/support/blackberry101/setup.jsp#tab_tab_email
Good luck and let us know!
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I have just purchased an activation key for iWork but when I enter it it is rejected as invalid. Any help or suggestions please?
Check the usual suspects, letter O and number zero for example, also letter "ell" and capital i.
We are however not Apple. Contact their telephone support for wherever you are.
Peter -
I'm trying to reinstall Logic Pro 9, and it says It's already installed. I have a project due for class and I need help asap. Please help!!!
Yea I am. I deleted Logic Pro 9 and moved the App to the Trashcan like normal. Then when I go to install it, it says its already Installed. When I do this with other apps; it works fine, the install thing comes back up like it should once you have deleted the app
-
hello. i forgot my restriction passcode. i havn't back up so i can restore. i want to reset my iPhone4 as new.. please help me.. please???
The Restrictions passcode is part of the backup, so you would not want to restore from backup. To restore as new, just connect the phone to the computer and iTunes, and restore. If you cannot just click on restore, you may need to put the device into recovery mode. Search for infomation on that.
-
My iPhone4s turned itself off and will not turn back on unless it is charged at all times. I need help and answers please.
And we would need more info. "will not turn back on unless it is charged at all times." is pretty obvious: the phone will obviously not turn on unless it is charged.
Describe your problem clearly.
Maybe you are looking for
-
Hi, all, An update for Blackberry App World has just been released. The new version is 1.1.0.35. It can be downloaded directly from Blackberry at their website from your Blackberry device. I'm not sure of what exactly has been updated, but hopeful
-
Tax jurisdiction code creates a difference when posting invoice with PO ref
I have added a tax jurisdiction code since the client wants to be able to sort taxes by location. The problem now is that, I have posted a PO with a tax jurisdiction code but upon posting the invoice with reference to this PO, there's an error sayin
-
Hard drive is getting full - how do I empty it?
My hard drive seems to be too full and I don't know how to get it cleaned up. It's a late-2008 alum 13" macbook, 250gb HDD, and only has 68gb available. I know there is a pretty good sized music library on the drive, but all my photos/videos are stor
-
Consignment settlement MRKO and EDI
I use a vendor consignment flow, with MRKO transaction and generation of application message KONS. I want to send this message by EDI (perhaps is it KON6 in this case ?) Does somebody knows which ALE message must be used to build the interchange agre
-
Web service - eclipse - apache/tomcat - soap - java
Hi! I want to develop a web service. I use eclipse as java ide, and apache as web server. I could not get the information how to develop a web service with my ide and web server. I want to use soap too. Anyone will you please help/instruct me to deve