HELP!! Trying to add cc email to form.

I used a script I found from a post titled, "drop down list with multiple email addresses." I want the drop down menu for selecting a to: but also want to have a set of email addresses automatically populate in the cc: I am new to Livecycle and not very familiar with scripting. Please provide any information to assist.
Thank you!

Thank you so much! I believe this has resolved my issue. I really appreciate your assistance.

Similar Messages

HT201320 i'm trying to add an email account and foolowed on screen directions but after "verifying account" screen i got new account" and no options highlighted but "cancel" The mail server is our local phone company. Appreciate any help.

i'm trying to add an email account and followed on screen directions but after "verifying account" screen i got "new account" and no options highlighted but "cancel" The mail server is our local phone company. Appreciate any help.

Hello there, shallotte07.
The following iPhone Troubleshooting Assistant should get you through all the steps to set up mail:
Apple - Support - iPhone - Setting up Mail Assistant
http://www.apple.com/support/iphone/assistant/mail/http://www.apple.com/support/iphone/assistant/mail/
Remember that some Service Providers require particular settings, and you may need to contact them directly to acquire that information. Check out the "Email cheat-sheet" section in the information that follows:
If iPhone can't find your service provider's settings, this article can help you obtain the necessary account settings from your provider.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

I'm trying to add the email address for my verizon phone to iMessaging. In order to verify, you have to reply to an imbedded link in the message. Unfortunately the link is truncated. Any idea how to get around this?

I'm trying to add the email address for my verizon phone to iMessaging. In order to verify, you have to reply to an imbedded link in the message. Unfortunately the link is truncated. Any idea how to get around this?

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(122986)

I am trying to add my email address to facetime on my iphone4s. Facetime notification is telling me "unable to verify email because it is already in use". What do I do to add my email address?

I am trying to add an email address for facetime on my iphone4s. Facetime notification says "unable to verify email because it is already in use". How do I add a new email?

You may be able to find your Apple ID at Look up your old and forgotten Apple ID

When trying to add an email address with domain .loans system says enter vaild email address

Hi there I am trying to add an email address ending with .loans as domain and system says add valid email address.

new account are created without a password, so asking for it is normal.
see http://thunderbirdtweaks.blogspot.com.au/2011/07/pssswords.html
Compare the passwords Thunderbird has for the other accounts and see if using the same one is what you need to do.

I am not receiving the verification email when trying to add an email account

I am not receiving the verification email when trying to add an email account to facetime and iMessage. Is there something else I can do?

Hi,
I don't ever remember getting an email when Adding an account.
Apple seems to verify it some other way (a self test to see if it is valid ? an actual email ?)
I tried adding an older @mac.com account that is not a valid email (gained when MobileMe was the Apple service and the @Mac.com registration was used for iChat names).
I then tried to add a Yahoo one.
This got past the first part and said an email has been sent.
As you say this has never arrived.
( checked the web Site for Yahoo Mail as well as my Mail App.)
In each case I also checked the Spam and Junk folders in both places.
I then tried an iCloud ID.
(FaceTime seems to treat the Original Apple ID and the iCloud issued email as separate IDs)
I did not get and email (Although it said it was sent) I did get a Pop up for the FaceTime app asking if I wanted to add an email and a second for the actual email itself. (It turned out it added an @me.com email also issued by iCloud before the @icloud.com was issued.
This is much the way iMessages adds emails when you add the emails to an iPhone, the Mac version gets pop ups.
I recently had something similar in Messages that might be related.
In Messages 7 (Mountain Lion) it seemed it could be any Apple ID that was used.
In Messages 8 it seems this has to be an iCloud linked one.
The @mac.com one I used above could not be added to iMessages either when I tried it about two months ago.
It might be one I have removed the creating/Recovery email so that i could create another Apple ID.
The name continues to work in Messages as an AIM valid screen name but I could not add it as the iMessages account and got sent to iCloud to "register" it but ran into problems that I have not sorted out yet.
EDIT.
Checked the Apple ID site and the @mac.com email I used has no linked Alternative/recovery email.
8:29 pm Sunday; March 9, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
Message was edited by: Ralph Johns (UK)

HT1688 Hi. I'm trying to add an email account to iPhone but it gets stuck on "VERIFYNG ACCOUNT" pls assist

Hi. I'm trying to add an email account to iPhone but it gets stuck on "VERIFYNG ACCOUNT" pls assist

Enter the correct information for the email account or contact the email provider.

2 items: 1) importing cvs columns do not match t-bird columns 2) error msg when trying to add 2nd email account

Hi and thanks in advance for lending a hand.
Issue #1
Followed instructions at https://www.youtube.com/watch?v=8Df8mRL3TBs to import cvs to t-bird – but
My cvs headings are not name, email m chat name, org, additional email etc etc
Why are my columns names not showing up?
+++++++++++++++++++++++++++++++++++
Issues #2
Adding second email address in thunder bird
email address #1 works fine - but trying to add 2nd one – having error msgs poop up.
1st error msg is:
[Exception... "Component returned failure code: 0x80004005 (NS_ERROR_FAILURE) [nsIMsgIncomingServer.verifyLogon]" nsresult: "0x80004005 (NS_ERROR_FAILURE)" location: "JS frame :: chrome://messenger/content/accountcreation/verifyConfig.js :: verifyLogon :: line 98" data: no]
Pressing “done" again yields different error reply: Incoming server already exists.
[end of error msgs]
Have tried box1121.bluehost.com as well as mail.bikempowered.com for server hostnames - various ports and SSL’s
The Tech at blue host claimed there this was a bug known to thunderbird – and that a solution is known to be needed.
Seeking solutions - also I’m 90% Luddite - so please if at all possible, but things in “for Dummies” mode
With gratitude and hope,
Brian

About .csv check your .csv-file as a text file.
Is the first line your column-names separated with a "," ?
It should be. When you import, mark that 1st line has column-names
Then move Tbird's names around until they correspond with yours. Your names will not be imported.

Help - Trying to add a Homehub 2 to extend my Home...

Hi All
I've recently acquired a Homehub 2 (type A) and I'm trying to add it to my network to extend my Wifi. My primary router is a Homehub 3 (type A). I'm using TP Link Powerline adapters around my house to extend my wired network, and plugging my HH2 into a gigabit switch from one of the Powerline adapters (I know this works as I have a working Xbox and WDTV both networked from the switch via the Powerline adapter).
I've followed the guide here (http://www.filesaveas.com/jarviser/repeaterhubswired.html) to set up the HH2 as a WAP.
I've successfully reset to HH2 back to the factory defaults, accessed the HH2 via the preset admin password, reset the admin password, renamed the SSID to a unique SSID, given the SSID a password, disabled DHCP, disabled the firewall, and reset the IP address to 192.168.1.175.
Currently I can locally browse to the HH2 web client and login at 192.168.1.175. I can also see the HH2 via wifi on my network. However, the issue is that when i attempt to connect to the HH2 via wifi it never manages to assign the device an IP address.
Anyone any ideas as to the problem / solution?
Thanks!
Solved!
Go to Solution.

I got the same problem at the weekend (albeit between two HH 2 type a routers) when the power line adapters weren't connecting to each other. If you have changed the DHCP settings in the "slave" router - the IP addresses will be allocated by the master router. If the slave cannot connect to the master then it can't assign an IP address.
Anyway that's what seemed to have happened to me - immediately the two routers were connected the IP addresses resolved immediately.
You may want to try resetting the powerline adapters and make sure they are connecting to each other (on the BT supplied adapters that means the top "data" light is displaying green on both adapters). I also found that sometimes after a disconnection or the master router being switched off, I had to restart the "slave" router after the master router was available again.
I hope this helps.

Hi in need of help trying to add a live voting system

i am trying to add a live voting system to my website basically two buttons one dislike and like its quite hard to explain a good example is www.truelad.com they have the set up that i want and i am quite confused on how to do this.
any help would be mch appreciated
oyea and i want it to be live and login feature

Which server-side programming languages and databases are you using for your site?
There are several voting widgets (plug-ins) available for WordPress, Joomla! & Drupal. If you're using one of those frameworks to build your site, that's probably where you should begin searching.
Nancy O.

HELP Trying to add a printable image to a pdf Acro Prof 6

I've already spent 4 days too many on this project. I've been asked to take this pdf and create one identical for the company. It's a fillable form also so instead of trying to recreate everything from scratch I was able to edit the text and change over everything that I needed to, which wasnt much.
Except.... I can not get our company logo on the top of the page. I have Acrobat Professional 6. Yesterday I finally thought I solved the problem going under Tools -> Advanced Commenting -> Attach -> Paste from clipboard. But because its just a "comment" when I go to print it wont show up.
I've been told to just add an image to the Header, yet I am unable to figure out how... Once I'm under this section it only allows for Text, not an image.
I'm really pulling my hair out here over this... If anyone can please tell me how to add an image to a pdf (which is a fillable form) that when printed will actually show up as well PLEASE HELP.

I just opened the watermark tool in AA8. I don't have AA6 handy. It has a scaling and location on the page after I select a graphic file to import. It also shows a sample page so I can see how it will display. I do not remember how watermarks worked on AA6. Will try in a bit.
For AA6, it looks like you can only put in a PDF file. In that case, use a word processor to create the desired result you want for the background (the entire page, not just the logo. Then create a PDF to use for the watermark or background. Open the watermark/background tool and insert your new PDF (not sure if you should use background or watermark - might give both a try and see if that does the job. At least it appears to be what my system suggests. You need to be sure you use the same paper size since AA6 places the whole page you create. You might be able to use other sized, but then you have to deal with centering and such. Unless you have time to play a bit, I would create it the one the same size paper as I have suggested and then it is one less thing to have to work out.

I need help trying to get my email address

I need my email address to my skype name brittany.cifers1. I havent logged in a long time so i dont remember any of it

Hi, Brittany_Cifers, and welcome to the Community,
We here in the Community do not have access to Skype account records; only Skype Customer Service does. Therefore, if you cannot access your account to re-set your password and change your registered e-mail address, as strange as it may seem, you will need to create a new account in order to contact them.
Skype offers help and support through ... :
Email and Live chat (for eligible customers)
To get help with the issue you’re experiencing:
Go to the Support request page.
Select the topic you need help with and the problem you’re experiencing. Some information that might help with your problem is displayed.
If you still feel that the information doesn’t help, click the Continue support request button at the bottom of the screen.
Select your contact method. We recommend that you check our Support Network first.
If you chose email, enter your details, describe your problem, and then click Send support request. We'll get back to you as soon as we can.
We don’t currently provide telephone support.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Help: trying to add muic to eintire web seite

Hi there i am in need of serious help. i want to add a music
to my home page. the problem is i know how to add it to one site
but i want the same same music playing the entire time, and it
could be still be playing even when one is viewing other
pafges.

Link to your sound file through the properties Inspector,
Then use the Behaviour which is in the right hand panel. If
you can't see the 'Behaviour ' then go to Window - Behavior then
you will see it in your panel. There are plenty of options to
choose from. Something else you could do I guess is add a swf file
in your banner.

I am trying to add an email with the microsoft exchange, I was told I need to uncheck the secure conncetion on the server page. Anyone know how to do this?

I know my server information.
I was told that you have to uncheck the box on the server page that says “this server requires ssl” or “secure connection”
Problem I can't find where to do this...
Any suggestions

After you setup the email account you click on the account then click the advance button you will see the information.

Receiving error trying to add logo to a form

I am receiving Adobe Output Designer - Message #2007
The message details says 'error opening logo file' and the path. I have tried saving the logo as .bmp, .jpg and have opened it as an output designer executable.
When I try opening as paint I receive error message #2 'invalid template design'.

I had problems with adding my company logo as well (Jetform Design ver 5.3). I created the logo in CorelDraw & saved as a .TIF. One thing to try is making sure all the text in the logo (if there is any) is set to curves in your logo design program. Then export as a .TIF format.
Not sure if your logo incorporates colors or is black & white but if it's one color, save as a black & white .TIF.
Good luck!

HELP!! Trying to add cc email to form.

Similar Messages

Maybe you are looking for