Help!!!! trying to install leopard on a powermac g5 tower

ok im new here and i would like to get some kind of help. i have a powermac g5 tower that is been giving me alot of problems. i currently have 10.4.11 and trying to upgrade to leopard. but every time i do the install process it quits on me and tells me the source media is bad try to install again or restart it. i did that already and still no go. so i contacted the apple people and they first tell me that my opitical drive was bad so i go ahead and replace it. still gives me the error message. ok so i call again they tell me ok that my hd is bad i need to replace it. ok so i being the dummy and listening to them go buy a hd and try to install it once again nope still gives me the error message so i call them again and they tell me ok that i need mac os tiger and the leopard should just install fine. nope i bought tiger for cheap on ebay and nothing no luck i cant get to work i keep on getting the message that the source media is bad and i need a new disk . so im really confused as to why i cant get leopard to install in to my g5.
p.s. i do have another copy of leopard because the mac people taught that my disk was bad but i know for a fact that the one that they sent me is not bad also.
p.s.s .
please help me to try to fix this problem thanks

sorry about the late answer. but i do not have the tiger cd like the one in the picture mine is gray and it says on the dvd for g3g4g5 install dvd. also the leopard cd has the big x on the dvd. i called once again the apple people to see if they can help me now they tell me that my ram is bad. so first they told me my optical drive was bad. then my hard drive, then my video card was not right. then i needed mac os tiger to install leopard. so now i need ram. also all the plugs for the optical drive are installed right and the hard drive also installed right. and i tell them the specs and they tell me they are more then fine for leopard. so now im going to purchase some new ram to see what happens. also is it true that mac os leopard needs original apple ram to work. i keep on reading about that

Similar Messages

  • Help - tried to install leopard over tiger on iBook G4 and cannot boot up

    My ibook G4 apparently does not have enough disk space to enable me to install leopard; shame, BUT in process of finding this out I cannot restart in Tiger - machine spends 3-4 mins trying then powers down to black screen.
    Any help/advice gratefully received...
    Thanks, Bob

    Hi Bob, and a warm welcome to the forums!
    Do you have a Backup?
    Do you have a bootable external drive?
    Do you have another Mac around so you could use FW Target Mode to clear some space...
    http://docs.info.apple.com/article.html?artnum=58583
    If none of the above, then using your Install Disk to Erase everything and start over completely is about the only ting left.
    Due to temporary files, RAM Discs, VM, you need twice what they say minimum to install... 20 GB free.

  • Trying to install Leopard on my iMac (G5).  Got to the screen that asks for the user name and password and it won't take it.  How do I get out of this and resume the software install?

    Trying to install Leopard on my iMac (G5).  Got to the screen that asks for the user name and password and it won't take it.  How do I get out of this and resume the software install?

    Help here >  Mac OS X: Changing or resetting an account password

  • Trying to install Leopard server on my Mac mini

    I'm a registered Apple Select Developer and I'm trying to install Leopard Server on a Mac mini I just picked up the other day. Is there a way to do this using the image or do I have to burn a DVD in order to do the install? The image is over 5GB's so I'd need to get a dual layer disk.

    Is this just for a test?
    If so you can create 3 partitions, one a bootable volume the second partition a place to restore the Leopard image and the third partition to install the new software you restored on the second partition. You do loose two small volumes temporarily, but you can make them relatively small since these are only used for installation purposes. The details can be found on the developer site under " leopardclient_9a377a_seednote.rtf".
    I've done this on older machines with no CD players installed.
    -Den

  • HT2956 Trying to install Leopard on my iBookG4

    Trying to install Leopard on my iBookG4, but I get a msg that "The installer could not validate the contents of the 'AdditionalSpeechVoices' package."  Can't I just make it skip that package and install the rest somehow? 

    I believe it is possible to do a custom installation, but I don't know if you can isolate a component that may be regarded as "essential" by the operating system.  Usually a custom installation is if some otherwise optional component such as an old version of iTunes is not wanted for installation.
    You could try making a backup copy of the DVD and installing from that.  Suggestions on how to do that are here:  http://creativebits.org/mac_os_x/make_a_dvd_copy_of_mac_os_x_tiger  Note, you will probably need a dual layer DVD, not the more common single layer.

  • Tried to install Leopard on macbook also running windows

    Tried to install leopard on an intel macbook with a partitioned hard drive to run windows. Not only would it not install leopard, but now it won't even recognize any of the original install dvd's. Not sure what to do next...

    You didn't mention what OS you were running. If 10.7 or above, boot into the Recovery Partition (command - R on a restart) and run Disk Utility/Repair Disk/Repair permissions until you get no error. Reboot normally and see if the installation will finish.
    If you were running10.6, boot off the DVD and do the above.

  • Problems trying to install Leopard

    Hey Guys, I just purchased Leopard yesterday and was trying to install it today when I encountered a few problems. First it was telling me that I needed to reformat my drive before it would let me install it. I went to the start up menu so that I could restart my computer using my HD instead of the disk, and when it got to the apple screen, it just shuts down! I tried using my leopard disk and powering it on, but it still shuts down at the apple screen...Did I do something wrong?? I hope my computer isn't dead...

    See if this article helps:
    _http://docs.info.apple.com/article.html?artnum=306877_
    Joe

  • Trying to install Leopard...

    Hi there,
    I just bought a new macbook 13" so decided to give my older iMac G5 to my sister for christmas and at the same time to update it to Leopard. Since the iMac was unable to read from Leopard's double-layer dvd, I decided to try installing it from my macbook and found like many others that it won't let you install it since it asks to format the hd to GUID even if the cpu is an apple one. I kinda found a way to make it work:
    I started my macbook as an external drive with the Leopard DVD in and booted the iMac (that i had previously erased).
    The iMac then starts from the dvd that's in the Macbook (Leopard).
    I started installing Leopard, looked like it was working fine until I got this error telling me that there was an error with BaseSystem.
    I tried again twice, same problem.
    Tried reinstalling Mac OS 10.4 and also 10.3.5, still the same kind of problem during the installation but not confirming or not that it has something to do with Base System anything else.
    Now, I'm stuck with an iMac that is not even 3 years old on which I can't install a system. I've tried re-formatting everytime I re-installed for every OS. Still the same problem. Everything seems alright hardware wise, I had no problem before trying this. Smart is verified for the HD.
    One thing I need to say, before I found out the whole GUID thing between Intel-based and PPC, I installed Leopard from the Macbook to the iMac with no problem, worked perfect and even booted it from the Macbook, it was working perfect, so I doubt it is a problem with my cd's/dvd's.
    I have no idea of what to do now...
    Anyone?
    Thanks!
    Frank

    It doesn't work with a USB ext. drive, can't boot from it.
    Installing Leopard from Macbook as an ext. drive to iMac: error.
    Installing Tiger from Macbook as an ext. drive to iMac: error, please retry/restart.
    Installing Tiger from iMac: error, please retry/restart.
    Installing Panther from iMac: error.
    I have no idea what to do now, I can't install Leopard on an ext. drive from my Macbook since it wants me to format it as GUID and I need it to be formatted as APM for it to work on my iMac.
    Solutions I thought of:
    1- Buy an external dvd drive to plug in my iMac. Don't know if it would work though, because that's pretty much what my Macbook does when I try installing Leopard from it while it runs as an external drive plugged into my iMac.
    2- Buy an external firewire HD drive and find an old iMac (not intel) that reads double-layer dvd (or just plug it in my macbook again to use it as an external dvd drive) and try installing Leopard on that ext. HD drive (which should work, I wouldn't see why not). Then, I could try to restore Leopard from the ext. drive to my iMac, or just try installing Leopard from the ext. drive to my iMac.
    Can it be a memory problem, i've seen that somewhere else, but I don't get the same kind of problem. Others have their computer crash, or get a blue screen after succesful installation.
    Any further help would be greatly appreciated,
    Thanks,
    Frank
    Message was edited by: François Grégoire

  • I'm trying to install leopard onto my ibook G4...why won't it work?!

    I've been spending all day trying to get Leopard onto my iBook G4, and everytime it gets to the screen "preparing installation" and freezes. Nothing ever happens. What is wrong with it and how can I fix it? Help please!
    Message was edited by: oukatielee

    Does your computer meet the requirements for Leopard?
    System requirements
    You must have a Macintosh computer with:
    an Intel processor or a PowerPC G4 (867 MHz or faster) or G5 processor
    a DVD drive
    built-in FireWire
    at least 512 MB of RAM (additional RAM is recommended for development purposes)
    a built-in display or a display connected to an Apple-supplied video card supported by your computer
    at least 9 GB of disk space available, or 12 GB of disk space if you install the developer tools

  • Trying to install garageband on my powermac g5 but cant find install

    trying to install garageband on powermac g5 10.5.8 but can only find updates not the install bought an i-life 8.0 cd but my cd drive will not read it only spits it out any sugg..... and also is there a 10.6.0 update for my g5 or is 10.5.8 the highest

    I believe that iLife came on a DVD, not a CD.

  • New iMAC. TRIED TO INSTALL LEOPARD. EJECTS CD. WON'T BOOT OFF INSTALL CD

    WHAT A NIGHTMARE!New iMac came today-- with antique software. Tiger installed from factory-- and way out of date. Leopard DVD included in box-- tried to install- just keeps ejecting the CD when trying to do the reboot. 2.5 hours on the phone with overseas Apple support (ha!)-- machine will not boot from install CD's (either Leopard or Tiger). Keeps ejecting the cd.
    What crap. ANybody else have this problem? I bought a mac because I didn't want to fight sw issues. Boy was this a mistake.
    Any advice appreciated, or I'm sending the POS back to Apple get a refund and buy a Dell.

    l8_apexer wrote:
    what would you think of ordering a machine based on seeing it demoed with Leopard-- only to have it shipped from the factory in China with Tiger-- and first thing it does is look for softwre updates-- and find over 150MB of updates it wants to install-- -within its first 15 minutes of being powered up????
    If that's not shipping a machine with old software- I don't know what is.
    What's the fuss about apple anyway? Shipping machines that don't have current sw loaded, won't boot from install DVDs, and then tell the customer that it will take two weeks to replace the unit-- or I can drive to an APple store (with gas at 3.25 a gallon which is an hour away) and maybe they can fix it, but not sure if the parts are available?
    Has anybody else had this problem?
    I would ask for a new machine with Leopard pre-installed which is what you expected to get and paid for. I can only assume it's an older machine since the new ones do come with Leopard installed.
    My opinion, for what it's worth is to return it and ask for the new Leopard version.

  • Help tried to install itunes get to 99% then it times out

    Help am trying to download itunes both on my lap top running windows7 and on pc running xp  gets to 99% then it times out

    Hi everyone, I'm also having the same problem !  I have been trying to install itunes for 2 days on my laptop. Windows 7 and quicktime are both downloading until about 99% as well. I have itunes on my iphone 4 and I need a song so I can download it on a CD for my Uncle's Funeral in the morning !! I thought I was going crazy, as I'm not very tech savy..then I stubbled across all of you guy's.. Could it maybe at apple mac or itunes end ? My laptop is new and it's working fine for Uni.. Any ideas or help out there, I would really appriciate..

  • Please help: trying to install Oracle 8.1.6.0 on Mandrake 8.1

    Hi, I am trying to install Oracle8i that comes with "Oracle for Linux Starter Kit" on Mandrake 8.1. Could someone please give tips or pointer how i can accomplish this? The Universal Installer starts fine, but then a dialog pops up about compiling sqlplus. here is a piece from the log file:
    Calling action unixActions1.7.0.17.0 make
         installMakePath = /usr/bin/make
         installMakeFileName = /usr/oracle/sqlplus/lib/ins_sqlplus.mk
         installTarget = install
         undoMakeFileName =
         installArguments = ORACLE_HOME=/usr/oracle,
         logFile = /usr/oracle/install/make.log
         undoTarget =
    Exception thrown from action: make
    Exception Name: MakefileException
    Exception String: Error in invoking target install of makefile /usr/oracle/sqlplus/lib/ins_sqlplus.mk
    Exception Severity: 1
    Exception thrown from action: make
    Exception Name: MakefileException
    Exception String: Error in invoking target install of makefile /usr/oracle/sqlplus/lib/ins_sqlplus.mk
    Exception Severity: 1
    Exception thrown from action: make
    Exception Name: MakefileException
    Exception String: Error in invoking target install of makefile /usr/oracle/sqlplus/lib/ins_sqlplus.mk
    Exception Severity: 1
    Calling action unixActions1.7.0.17.0 make
         installMakePath = /usr/bin/make
         installMakeFileName = /usr/oracle/network/lib/ins_net_client.mk
         installTarget = install
         undoMakeFileName =
         installArguments = ORACLE_HOME=/usr/oracle,
         logFile = /usr/oracle/install/make.log
         undoTarget =
    Exception thrown from action: make
    Exception Name: MakefileException
    Exception String: Error in invoking target install of makefile /usr/oracle/network/lib/ins_net_client.mk
    Exception Severity: 1
    *** Cancel Dialog: ***
    User selected: Stop installation of all products.
    Error in invoking target install of makefile /usr/oracle/network/lib/ins_net_client.mk
    Unable to read /usr/oraInventory/oraInventory/Contents/OracleHomesList.ser. Some inventory information may be lost.
    Unable to read /usr/oraInventory/oraInventory/Contents/LibsList.ser. Some inventory information may be lost.

    I had the same problem with Oracle 9i on Mandrake 8.1. I am not sure if the same fix will work or not. See my 9i on 8.1 notes at:
    http://members.home.net/joseph.j.flynn/oracle.htm
    snip---
    You will get a link error after all of the copying and unpacking has been done somewhere in disk 3. Leave the error message up on the screen and go edit the $ORACLE_HOME/bin/genclntsh script. Blank out the LD_SELF_CONTAINED env var. Save and execute the script. Hit the retry button on the installer. The alternative approach to this involves downgrading the binutils but that seemed to get awfully messy to me. (thanks to a post from Helmut Seruega for this fix)

  • Trying to install Leopard on a fresh hard drive

    UGGGH.... Mindbending problem here.
    I've got a two year old Macbook. It was acting very strange (total reinstall of Leopard resulted in some random old programs showing up in new OS), and for a variety of reasons Apple told me aI needed a new hard drive. Since it was out of warranty I bought one myself and installed it.
    I install it fine, load from a DIFFERENT Macbook's Leopard Install Disc One (I can't find my original Tiger one) and it gets to the install screen. I select English as my language. It says "Installing software" for two seconds before it says "Mac OS X can not be installed on this computer". That's it. It brings be to the normal Leopard install menu. I run Disc Doctor or whatever it's called, it says the hard drive is fine. I formatted it and named it "Macintosh HD". Still doesn't work. Every time I try to boot from this DVD it says OS X can't be installed. Most frustrating error message ever. I have Time Machine, so I connect to my network and try to install from a Time Machine backup, no luck.
    What's worse, I have a spare Leopard DVD install disc from when I originally upgraded from Tiger without a problem last year. I put it in the Macbook's DVD drive, hold down C, and it won't boot from it. It just reads the disc, sits there for a second, and ejects the disc. EVERY TIME.
    So this Leopard Install Disc One that came with a different Macbook tells me OS X can't be installed. The regular Leopard DVD keeps getting ejected when I try to boot from it.
    What the **** is going on with this thing?

    you can't use an install disk that came with a different computer. It's hardware specific and it won't work as you've found out. It's also against ULA. You need to use a retail version of leopard DVD. it sounds like the one you've used before is defective. just in case try cleaning the old leopard disk and using it again. also, try cleaning your DVD drive. you can get a DVD cleaner (it's a disk with brushes at the bottom). if all of this fails get a new leopard install DVD.
    P.S.since you have access to another macbook, try booting it from your old leopard DVD. If it boots, boot your macbook in target mode, connect it to the other one and install leopard from there.
    Message was edited by: V.K.

  • [locked][HELP] Trying to install plug-in but it's not working.

    I'm trying to install a plug-in for Photoshop CS3. It's a DDS File Type Plug-in.
    When I run it, Photoshop gives me this errer message:
    "could not complete your request because it is not the right kind of document"
    Could I get some support on how to install and use this plug-in please.
    THANKS!

    I have other contact options if you would find it easier this way.
    XFIRE: theandymyster
    MSN: [email protected]

Maybe you are looking for