Help! Trying to install Mavericks on MBP and stuck on Apple screen...

I have a late 2007 macbook pro previously running mountain lion and am now trying to update to mavericks. Once my computer automatically restarted itself it just got stuck on the apple screen with the spinning wheel below it. I let it sit overnight last night but still no change this morning.
I then forced a shut down and went through all the suggested steps I could find online: repaired permissions, verified permissions, and reset my NVRAM (3 times). I also even tried going into recovery mode and re-installing Mavericks but the same exact problem happened all over again. Now it's been stuck on the apple screen for about 3 hours...
Before this I had no issues with the computer. A couple years ago I replaced the logic board and more recently I installed a brand new hybrid hard drive. So things should be working fine. Not sure where to go from here but any help would be appreciated!
- Jake

Hi jakembp2008,
If your MacBook Pro won't boot past the grey screen with the Apple icon and spinning wheel, you may find the following article helpful:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Regards,
- Brenden

Similar Messages

  • I have a MBP running Mountain Lion. Tried to install Mavericks, but it keeps telling me that my disc is used as time machine backup, and cannot install Mavericks, any help appreciated

    I have a 2011 MBP running Mountain Lion. Tried to install Mavericks, but it keeps telling me " cannot install Mavericks because disc is used for Time Machine backup". I tried disabling TM by issuing the command in console " sudo tmutil disable local". Still no luck. Is there a way of erasing all the time machine backups from my system disc?
    Thanks.

    Thanks Matt. I tried erasing the "Backups.backupdb" folder. It does not allow me to do that, inspite of "sudo"-ing. I ended up installing Mavericks on another disc, and use disc migration assistant to transfer my data, before swapping out the old disc from the MBP.
    ST

  • I'm trying to install Mavericks and got this message: You need 4.94 GB of available space to download OS X Mavericks. Remove items from your startup disk to increase available space. How do I do this?

    I'm trying to install Mavericks and got this message: You need 4.94 GB of available space to download OS X Mavericks. Remove items from your startup disk to increase available space. How do I do this?

    With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
    If it does, it's time for some hard drive housecleaning.
    Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
    Have you emptied your iMac's Trash icon in the Dock?
    If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
    If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
    If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
    Look though other Apple Mail folders like the junk mail and delete the mail that is in there. Look through your sent items folders and see there is any mail in there that can be deieted.
    Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
    Other things you can do to gain space.
    Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
    This app will help you locate files that you can move/archive and/or delete from your system.
    STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
    Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
    Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
    Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
    Download an app called OnyX for your version of OS X.
    When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
    Typically, iTunes and iPhoto libraries are the biggest users of HD space.
    move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
    If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
    Good Luck!

  • I tried to install maverick and now my keyboard keys F10,F11, 7,8,9 on the number pad don't work on my iMac. How do I resolve this?

    I tried to install maverick and now my keyboard keys F10,F11, 7,8,9 on the number pad don't work on my iMac. How do I resolve this?

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • I tried to install ios7 last night and the screen is now on itunes with the usb symbols  Plugged the ipod into the laptop where itunes is stored.  Tried to restore only to be advised that a 3194 error has occured  cannot get any further please help!!

    Hi  I tried to install ios7 last night and the ipod touch now has a frozen screen with the itunes logo and the usb logo  I plugged the ipod into my laptop and tried to restore only to be met with the message 3194 error  cannot restore this ipod  please help thanks

    Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
    Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
    Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
    Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
    You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
    BTW Apple doesn't offer free support for this kind of issue with iTunes.
    tt2

  • I'm trying to install a cd application and I keep getting the message 'you do not have permission to use the application FSP OS X'  Even after selecting always allow and entering my login details it still won't accept it.  Help!!..

    I'm trying to install a cd application and I keep getting the message 'you do not have permission to use the application FSP OS X'  Even after selecting always allow and entering my login details it still won't accept it.  Help!!..

    Please repost in the Final Cut Pro forum. Have you considered upgrading your machine, if you are still running Leopard your machine may be as old as 5 years old. While this should not matter you probably won't get the performance you want out of a demanding app like FCP.
    Best of luck.

  • TS2951 I have a laptop (2010) with Lion OS and tried to install Mavericks and part way through the installation it quit and reverted back to Lion and the app store doesn't let me download Mavericks again

    I have a laptop (2010) with Lion OS and tried to install Mavericks and part way through the installation it quit and reverted back to Lion and the app store doesn't let me download Mavericks again. How can I resolve this?

    Is your data backed up?
    Are you running any non-Apple system optimization tools?

  • I have a iMac 5,1 made b/t 7/23/07-7/29/07 but have OS X 10.6.8 w/ 2GB mem but unable to install Maverick, Garage band and iPhoto.  Please help.  Thanks!

    I have a iMac 5,1 made b/t 7/23/07-7/29/07 but have OS X 10.6.8 w/ 2GB mem but unable to install Maverick, Garage band and iPhoto. Would installing Snow Leopard 10.6.8 make it possible to install Maverick?  Please help.  Thanks!

    The highest OS X version you can install on your model iMac is OS X Lion 10.7.5.
    To get to this! you would need to purchase the retail OS X 10.6 Snow Leopard DVD, first.
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    OS X 10.7 Lion is no longer available, directly, from the Mac App Store. You need to contact Apple at 1-800-MYAPPLE and ask for retail software sales and tell them you would like to upgrade your Mac to OS X 10.7 Lion and they will give you a special download code to download it from the Mac App Store.

  • Hi! I tried to instal whatsapp thro istore and it displayed the terms and conditions page. But the problem is there is no save or agree button. I am stuck in this page. I need help. This is a iphone5. This was after I upgraded to ios7

    Hi! I tried to instal whatsapp thro istore and it displayed the terms and conditions page. But the problem is there is no save or agree button. I am stuck in this page. I need help. This is a iphone5. This was after I upgraded to ios7.

    It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
    You can get it here:
    http://gimp-print.sourceforge.net/
    You can download the latest version from here:
    http://sourceforge.net/projects/gimp-print/
    Have you downloaded the recent Apple update to Epson drivers?
    http://support.apple.com/kb/DL1398

  • I am trying to install the new itunes and I keep getting error messages regarding my Apple Mobile Device....help!

    I am trying to install the new iTunes and I keep geting the error message "Apple Mobile Device" failed to start.  Verify you have sufficient privileges to start system services".  HELP

    Hey schouten53,
    Thanks for the question. I understand you are experiencing issues with the latest iTunes update. Let’s troubleshoot the iTunes installation by completely removing and reinstalling iTunes and all related components (it is important to remove all components in the order listed).
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Additional Information:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thanks,
    Matt M.

  • Error message when trying to install Mavericks onto macbook pro.

    Hi Been trying to install Mavericks onto my macbook pro (10.6.8) but the install fails after 3-5 minutes and I get this error message: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    I have tried to repair the drive through the utility function but I am told it cannot be repaired. I tried the recovery function as well but whilst I am able to select the source (external hard drive with recent time machine backup) the next screen prompts me to select the disk to restore but all it does is search for a drive and there is none there to select.
    Really not sure what else to do. Please help!

    Well some progress has been made so thought i would post what I did, in case someone experiences the same issue I did and maybe this will be of use to someone else...
    Ended up force-shutting my macbook down then switching back on, as soon as the chime could be heard i pressed command R and kept both keys pressed until Recovery mode kicked in.
    Internet Recovery came on which took approx 20 minutes (more about this here http://support.apple.com/kb/ht4718 )
    Then 4 options appeared
    1) recover with time machine back up
    2) set up and install Mac OSX (with the Lion icon and reference to Lion for some reason, I had Snow Leopard to begin with)
    3) get help online
    4) repair or erase disk using disk utility
    I decided to attempt to repair the drive but use the verification tool first which said the drive was fine??????!!!
    Then clicked on repair disk, this took only a few minutes then it stopped after a couple lines.
    While it was "repairing" the button changed to "stop repair" then changed back to "repair" so I took that to mean it had done what had to be done.
    Then closed the utility screen whch prompted me to restart macbook after selected a drive to boot up from (only one option came up for me)
    Did that and I was back into familiar territory and on my mac as I knew it ie snow leopard.
    I did restart macbook just to make sure and it just booted up as normal, to snow leopard with the maverick install icon still showing in the dock.
    Panic over. Not sure if / when I will give installing Maverick another try though....

  • Tried to install maverick but app store had 1 update for mountain lion so I installed it.it didn't restarted so I did n then it started installing mountain lion..

    Tried to install maverick but app store had 1 update for mountain lion so I installed it.it didn't restarted so I did n then it started installing mountain lion.
    I had 1 update for mountain lion so I did it said restart required but I got stuck in the middle of the process n  yhen it said install mountain lion again.
    Now what to do help me please

    iCloud isn't syncing them on your phone.  You simply added the email account to your phone and enabled calendar and notes syncing with the email provider, and the calendar and notes appear in the calendar and notes apps on your phone.  You can do this with Gmail, Yahoo and other IMAP account.  iCloud email is just another IMAP account, but syncs notes with Apple's iCloud server just as Gmail syncs notes and calendars with Google's server.
    iCloud didnt' set up a non-iCloud account on your Mac.  When you check Mail in System Preferences>iCloud, it only creates an iCloud email account.  You can also add other email accounts to your Mac by going to System Preferences>Mail,Contacts,Calendars and clicking on the "+" sign on the bottom of the left sidebar.  If you added these other email accounts to your Mac before you upgraded to Mountain Lion, these were simply maintained on your Mac after you upgraded.

  • Keep getting error when trying to instal Mavericks at the stage when computer is supposed to restart?

    Have tried to instal mavericks on a 2011 mac mini serveral times and keep getting a error when it gets to the reboot stage. Help needed thanks!

    Have you tried un-installing, then going to Apple Downloads (http://support.apple.com/downloads/) for download /installation of QT 7.6.2?
    Also - it wouldn't hurt to repair permissions before & after installation.

  • Received the following error message while trying to install icloud 3.1 and my iTunes stops when I try to access the iTune store, Microsoft.vc80.CRT,type="win32",ver="8.0.50727.6195",processorArchitecture="amd 64".HRESULT:0x800703EE.

    Received the following error message while trying to install icloud 3.1 and my iTunes stops when I try to access the iTune store, Microsoft.vc80.CRT,type="win32",ver="8.0.50727.6195",processorArchitecture="amd 64".HRESULT:0x800703EE. Recently upgraded to windows 8.1 then everything just wouldn't work properly

    Could you solve this problem? I have similr problem. I can't upgrade Itune it generat the error below. I already unistall de all version but the error still appear. Could you help?

  • Tried to install  lion on Macbookpro and getting a smart error message?

    Tried to install  lion on Macbookpro and getting a S.M.A.R.T error message, software up to date and enough free memory

    Do you have the 10.6.8 (or whatever came with the machine) install DVDs?
    If so you need to boot up with those and run Dusk Utility off the DVD. Check the S.M.A.R.T status at the bottom of the Disk Utility window when you have the MBP's disk selected. If the status doesn't say  Verified the disk is on its way out its already dead. It needs to be replaced.
    If it says Verified then do a Disk Repair on the MBP's disk.  Note any  errors you get and rerun Disk Repair until you get no more errors. If that doesn't happen the disk needs to be replaced.
    All this cos I bought an iPad and wanted to use iCloud!
    The install hasn't caused this. The disk was going no matter what. Its a good thing that you did the install and caught the error or else you might have lost your whole system.
    regards

Maybe you are looking for

  • Macbook Pro (Mid 2012 15 inch) crashes randomly

    Hello Apple Support Community!  This is my first writeup here so be patient with me.  In August 2012 I purchased my 15 inch mid 2012 MacBook Pro with 4GB of RAM and a 500GB Hard Drive.  For the first 2 years, everything was fine.  Fast-forward to Jul

  • External hard drive as additional space

    I want to get a new laptop when Leopard comes out, but I am running out of hard drive space on my old iMac G4. I would like to get an external drive to extend its life and speed up my iMac, which is becoming quite slow as the drive becomes full. My b

  • To next label in a flash movie

    Hi, Is it possible to add a button in a flash movie that will take you to next label - independent of label name? Thanks Jonas

  • Jar file in source path, is it possible?

    my question is quite simple: 1. can a java file (i.g. My.java) be zipped in a jar file then use the jar file in -sourcepath by javac.exe command? 2. can a java file be used in -classpath by javac.exe command? 3. can a class file (i.g. My.class) be us

  • [BC4J-bug] obsolete import statements remain behind in AM source file

    Just wondering if the following problem is a known bug or not: I've got an application module called 'AMExample' and it consists of 2 files: AMExample.xml and AMExampleImpl.java. When I remove a view from this module, the corresponding import stateme