Help. Trying to install new OS
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 3 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 5 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version (system): 1.7f10
Trying to upgrade to anything newer than OS x 10.6.8 cannot upgrade to Yosemite
Click here and order a download code for Lion 10.7.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(123775)
Similar Messages
-
i am trying to install new os x in to my iMac but it says this disk is locked is anyone can help me to unlock the disk
Launch the Terminal app, copy & paste this command into the window that pops up, and hit the return key. At the Password: prompt, carefully enter your admin password, since nothing shows up on the screen, and hit the return key.
sudo chflags 0 /Volumes/
Then, copy & paste these next two, one at time, into the window and hit the return key after each:
sudo chmod a+rx /Volumes/*
killall Finder
Quit the Terminal app and try installing again. -
I was trying to installed new ios update and suddenly my WIFI connection got desconnect. now I am trying to restore my Ipad2 but getting error saying "the Ipad could not restored, An unknown error accured (3194)". so please help me out to resolve the same.
When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547
-
Flashbuilder stalls when trying to install new software
hey all, for some reason Flashbuilder does not want to install new software. It just sits there forever calculating. Has anyone else seen this before? It used to work fine. Not sure what's changed.
25-May-200712:31 PM
len112 wrote:
I get this message when trying to install new software updater
error 2378 could not access vbscript run time for custom action
how do i solve this please
Hi len112
Have a look at this site:
http://www.nitropdf.com/kb/article.aspx?id=10106
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
Storeagent is trying to install new software?
I was using my Mac tonight and suddenly this dialog box I had never gotten before popped up. It said:
storeagent is trying to install new software.
Type your password to allow this.
...with fields to enter the data and a "Cancel" and "Install Software" button. In addition, there was a help (?) button that when clicked on called up Mac Help Center with the section on "If you forget your login password" but no data on what this storeagent is.
The dialog seemed to have been provided by Mac OS, since it floated above all windows.
Normally, when I get an unfamiliar message, I type a phrase from it (in quotes) into Google and this pulls up plenty of cases where people have inquired about the same issue before me, but this time when I entered the phrase used in the dialog and the title of this post, I got nothing. Surely I am not the first one who has encountered this dialog before?
I clicked Cancel, since you hear so much about viruses these days attempting to install malignent software. When I did so, I got a dialog with the icon of the Mac App Store, saying the app update had been cancelled.
Maybe this dialog is legit? Advice appreciated.Okay, I've thought of a couple of things you can try if you don't want storeagent to run when MAS is not open:
1. Go to Applications > Utilities and launch Activity Monitor. Processes are arranged alphabetically. scroll down to storeagent and, if it is running, highlight it. Then go to the top left of the window and click on "quit process". That is a manual way to stop something from running. Test: leave Activity Monitor open and launch MAS - check to see if storeagent launched itself right after that. If so, quit MAS and see if it quits - if not, quit the process manually.
2. What settings do you have set in System Preferences > Software Update? I prefer not to have things done automatically so I have everything unchecked:
You could test by unchecking everything to see if you get any further password prompts for installs after that. -
Previous company account on computer and trying to install new company accoun
previous company account on computer and trying to install new company account and no matter what won't let me install even after logging in?
Gives me max account limt however I'm the only one in the company using it. I did use the cloud for a previous company on my mac but now it wont let even my own practice's account.
Chould anyone help?
Thanks!Moved to the Downloading, Installing, Setting Up forum. They will be able to help you here.
-
im trying to install new version of itunes in my macbook but always failed.i can download it but failed to install and always says to contact with software manufacturer for assistance...please heblp me i couldn’t connect my iphone to iktunes..please coz in my mac their is old version of i tunes.....
Welcome to the Apple Support Communities
See if your computer is supported > http://support.apple.com/kb/sp575 Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Then, make a backup, insert the DVD and upgrade. Finally, go to > Software Update and update to the latest version.
If your computer is compatible, you can use Mountain Lion. Open App Store and purchase Mountain Lion. Check if your programs are supported > http://www.roaringapps.com -
i have tried to install new update on iphone 5 and now it wont turn on when i plug it in the charger it just shows i need to connect to itunes.
Given the state your device is in you have already erased your old stuff. You have an image on the screen that says, "Connect to iTunes." That's what the image means. So you will need iTunes on your computer.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS from iOS 5 or Later
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?
Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart. -
I am trying to install new software on my Imac and my keychain asks for my password, I type it in, it says it is wrong, I do it again, wrong, it gives me a hint, same one I have been using, wrong again, so I cannot get the new soft ware to download, how do I get my passwork on the keychain to work or how do I change it?
What model iMac and what version of the Mac OS is installed? "About this Mac" from the Apple menu is a good place to start.
-
Trying to install new upgrade to my iphone 4 and it put the phone in recovery mode. How do I get it out?
i have this problem too! have you fixed yours yet?
-
My iPad is stuck--when I tried to install new IO7 (auto-invite) it stuck at the Agree/Disagree page. How do I get it going, get unstuck, or dump the new OS?
Reset iPad and continue with update.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
trying to install new software for OS mavericks and i get the the product distribution file could not be verified. It may be damaged or was not signed error message
.can you assistWhat "new" software?
Barry -
When trying to install new App. The Apple ID shows my old one not the new ID which is verified. Please advise
Go to Setings>iTunes and App stores and make sure you are signed into your account
-
Im trying to install new drivers for my printer and it will not accept my password
Im trying to install new drivers for my printer and it will not accept my password
Hey fyermanbob,
Thanks for using Apple Support Communities.
OS X Mavericks: If your administrator password was not accepted
http://support.apple.com/kb/PH14014
Have a nice day,
Mario -
Trying to install new printer Canon imageclass 4880
Trying to install new printer on Mac Snow Leopard. Instructions are only for Windows. How do I get started installing the software?
You'll need to find the drivers. I found the imageclass 4890 OS X 10.6 drivers here, but didn't find 4880 drivers. Check the global Canon web sites.
Maybe you are looking for
-
MacBook (Lion) doesn't sleep even after closing lid
Is anyone experiencing this as well? I have encounter the same problem a few times now. My macbook would have it's fan keep running even when the lid is closed. Isn't it strange? I haven't had this problem before in Snow Leopard. In snow leopard, eve
-
How to add css styles in html file generated from Report builder?
Hi, I schedule report in web browser,but the generated report html file looks very simple and doesn't correspond with the other html files which have css styles.So I want to add css styles to the generated html file from *.rdf in report builder.That
-
Accounts Blocked and My three Skype Subscription F...
Skype Blocked all my Accounts and keeps blocking any new Accounts which I try to open.I had made two subscriptions for India Unlimited Plan and One subscription for World Unlimited Plan.It was going fine for a persiod of two months and then all of a
-
Recover files from the iCloud, recover files from the iCloud
Hello, a couple of weeks ago my macbook pro was stolen, now I have a new one and I am trying to recover my files from the iCloud but I can´t. Can someone please tell me how to do it? Thanks
-
Save Panel Image / Screen Image does not work as an Executable
The Save Panel Image / Screen Image does not work as an Executable. It looks like there is a conflict with the Path, since the Screen_Image.exe is launched as Screen_Image.vi. I've tried this function both ways with the path name change Screen_Imag