HELP!  Trying to move master from one to another

I've got pretty much the same problem. Let me explain what I've done so far.
I uploaded photos to Album(Sledding) under Project(Winter). There were a few photos that belonged in the Album(Landscape) also under Project(Winter). So I dragged and dropped for Sledding Album to Landscape Album. I thought this would move them and not leave them in the original. But they were still there. So I went and tried to delete one, I got the message
"Managed master files stored in the Aperture Library will be moved to the Trash.
Referenced master files may be used by another project, library, or application. They will remain in their current locations unless you choose to move them to the Trash.
All versions, adjustments, and metadata will be permanently removed from your library. This operation cannot be undone."
Then went and check and the photo was removed from both albums and the project.
I've messed around and deleted one from each of the different albums and project just to see what would happen. And the same happens no matter what album or project I'm in.
I really need for someone to explain how this Master thing works.

Tried Robocopy and Richcopy but not having any luck , the files transfer but the permissions are not transferring with them , there taking on the permission of the new system.
Any suggestions
This topic first appeared in the Spiceworks Community

Similar Messages

  • Help!  Trying to move itunes from one PC to another but iPod keeps dying

    Hi everyone,
    I'm trying to move my itunes from my old, sad lap top to a decent used PC. I tried to go the route of using my iPod as a hard drive to move itunes but when i'm trying to load itunes from the iPod to the new PC, the process is interrupted because the iPod loses power. Now what?? I'm goin nuts...

    Once you settle on one of the options Kay provided you with, have a look at this post for some particulars:
    http://discussions.apple.com/message.jspa;jsessionid=a-sDj0Cp0o255UV1AE?messageI D=607339&ft=y&#607339

  • Trying to move VI from one computer to another w/ all sub VI's

    Hi all
    New to the community, LabView, and computer programming; needless to say, I need some help. I'm trying to move a VI from one computer to another, and this VI has a number of subVI's used in it. When I tried to move the VI itself, I'm not able to run it on the new computer because the subVIs aren't there; in their place are a number of gray question marks. I figure I need to go find the subVI's on the other computer and move them over as well, but (a) the computers I'm working on are so disorganized and jumbled that I can barely find anything and (b) there's a lot of subVIs that need moving, and doing an individual search for each would take forever. Is there a way I can move the VI over while automoatically taking the subVIs it uses with it?
    Thanks!

    The simple solution is the source distribution under the build specifications.
    Buy you really should clean up your directory structures.  If you can't quickly find a VI, it is next to useless.  Then I highly recommend getting a source control software to maintain your projects.  Something like Tortois SVN works very well (and is free).
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Trying to move songs from 1comp to another- NEED HELP

    I was orginally trying to move my itunes folder from my old comp to my new one. Easy enough right? Wrong. I copied the folder and put it on my 40gb ipod then went to put it on my comp. Well it only put bout 1/3 of my music like the first 15 folders. It started saying files were corrupt. Then I started getting the ! with the folder on my ipod. I tried reseting it but that doesn't work and it is fully charged. I'm using Windows XP. Plz help. I just sold my other laptop so I need to get these songs off the other computer.

    I have a similar problem, my hard disk has been reformatted and my library of songs is now only on the iPod, can i transfer them back from the iPod to the computer or is my library now only accessible on my iPod.

  • Move focus from one to another itemRenderer inside DataGrid itemRenderer

    I have a mx: DataGrid with 4 columns that have a itemRenderer with the following settings:
    - Mx:DataGrid:
    <code>
    <mx:DataGrid id="itensPedidoCompraList"
          width="100%"
    height="120"   
    dataProvider="{ model.pedidoCompra.itens }"
    editable="true"
    itemEditEnd="itensPedidoCompraList_itemEditEndHandler(event)">
    </code>
    - Mx:DataGridColumn:
    <code>
    <mx:DataGridColumn headerText="{resourceManager.getString('cadastroPedidoCompra', 'ident.PercentualDesconto') }"
                       width="60"
                       textAlign="right"
                       rendererIsEditor="true"
                                          editorDataField="data">
          <mx:itemRenderer>
                     <fx:Component>
                           <mx:Canvas>
                                     <input:NumberInput width="55"                                                                number="@{ data.percentualDesconto }"/>
                           </mx:Canvas>
                </fx:Component>
          </mx:itemRenderer>
      </mx:DataGridColumn>
    </code>
    The user clicks on the line of the grid and click on the column to edit.
    After him change or add value, ENTER key and have to move the focus to another column in the same line.
    The way I'm doing, is moving to the column below.
    What is the best way to do to move to the right column?
    thank you

    Try adding a capture phase event listener to DataGrid for keyDown and changing the key from ENTER to TAB

  • How to move iPhone from one to another Mac?

    We have two laptops and one iPhone. My contacts, calendar, bookmarks and notes sync between the two Macs and MobileMe and the iPhone. At present I sync my Photos, Apps and podcasts on my iPhone with my PowerBook, but since we are going on a trip and take along my wife's smaller and lighter MacBook, I'd like to sync from now on to her MacBook.
    How can I "migrate" the iPhone to the other computer without loosing my applications etc. and the data on the iPhone?
    Your suggestions/pointers/solutions would be highly appreciated. Thanks and cheers, Veit

    The iphone will sync with one computer at a time.
    When you sync to another, it will erase the current itunes content and pics from the iphone and replace with content from the new computer.
    A forum search is an excellent suggestion. This is asked and answered quite often.
    You can copy the entire itunes folder from the PB to the macbook. This should make the transition as seamless as possible. However, I believe that you would lose the content that is currently in itunes on the macbook as the new itunes folder would replace the old.

  • How can you move pages from one Muse site to another Muse site?

    I am trying to move pages from one Muse sitemap page to another Muse sitemap. This is so I can have multiple people working on creating hundreds of project profile pages and then transfer them into the master file that will be the final site.

    120norange wrote:
    I am trying to move pages from one Muse sitemap page to another Muse sitemap. This is so I can have multiple people working on creating hundreds of project profile pages and then transfer them into the master file that will be the final site.
    In this case your best bet would be to have the other people just provide content without the template and then you can just plug content in rather than doing a select all.
    You can open up both your site and their site at the same time in Muse to help the copying process.
    jkijki wrote:
    You have stuck your nose into my discussions with your useless answers before In the future do not reply to anything I write
    Technically, you jumped into the thread after Parikshit ..... and being rude is a quick way to not get help in the future. No need to be rude and disrespectful. Just saying .......

  • Failure to move messages from one account to another

    I have recently started having problems when trying to move messages from one account to another. I get a message that says: The IMAP command "APPEND" (to INBOX) failed with server error: message contains NUL characters.
    I have tried shutting down and restarting, repaired permissions. Not sure what to do next. Any help?

    Ernie,
    One is POP thru Cox Comm and the other is mobile me (the old .mac accts). Why would all of a sudden there be an issue when I several times during the day have been able to move messages from Cox to mobile me?

  • Why can't i move files from one folder to another by sliding them?

    help. i am trying to move files from one folder to another. but i cant slide them by clicking on a file and sliding it to another place. any suggestions? thank

    Go to Finder "Go" menu hold the option key and choose Library. Then go to Preferences trash these files:
    com.apple.finder.plist
    com.apple.sidebarlists.plist
    Then, restart, or log out and in again.
    (You will have to reset a few finder prefs the way you like them.)

  • How do I move files from one folder to another?

    On my MacBookPro I am trying to move files from one folder to a BSB drive.  I can copy, but I do not want the files left in the original location.  What do I do?
    J W

    Press the Command key while dragging them.
    (58054)

  • [CS3 JS]  Move pages from one document to another?

    First, a brief explanation of what I am trying to do. I have several individual chapters that I am including in an INDD book. However, I also want to be able to allow those individual chapters to stand alone, meaning that I want to add a cover/title page to each chapter file (these two pages would be placed before the current page 1 of each chapter).
    My preference would be to write a script that would open the cover/tp file and open the first chapter file; this part is no problem. Where I am running into trouble however, is the second step: moving the cover/tp pages (2 pages) over into the chapter file.
    Manually, I would open Cover.indd, activate the "move pages" menu, "Move pages: 1-2", "Destination: Before_Page 1", "Move to: Chapter1.indd".
    With over 100 chapters in the book, however, I would prefer to automate the process. I have looked into the Page.move and PageItem.move elements, but both look like they would require a location in the current document (either in (x,y) form or using "AT_BEGINNING".
    If I cannot get this to work, I will likely try to insert two blank pages, then cut/paste with a script, but I would prefer the "move" functionality, if it is possible.
    A couple of answers to potential questions:
    I can't simply place the INDD cover file b/c it uses a text variable to pull the chapter name; this personalizes each stand-alone chapter.
    Same answer to why I can't just slap the 2-page .pdf on the front of each. I need the text variable to still be active.
    Has anyone tried to move pages from one document to another using scripting? I tried to explain what I am trying to do, but if it doesn't make sense, I can try again. :)
    thanks!
    Matt

    ok here we are
    I get a raw skeleton that you will have to adjust but it's functional.
    Use a PDF for placement as you can specify the page that you want to place.
    I don't know if you can do the same for indesign files.
    So basically, it starts adding 2 pages and placeing the pdf in the same time.
    After that, it creates the textVariable and the frame that will receive it.
    Here you are:
    //If a document is open
    if(app.documents.length!=0)
    var ad = app.activeDocument;
    //Pages placement
    for(i=0; i<2; i++)
    //Add 2 pages on top of the document;
    var tmpPg = ad.pages.add(LocationOptions.BEFORE, ad.pages[0]);
    //Here you place your pdf
    app.pdfPlacePreferences.pageNumber = i;
    tmpPg.place(File(cover.pdf), false)
    //You should specify page x and page y but ain't found yet the way to go.
    //Text variable creation
    //Check if the textVariable named "txtVar" does not already exist...
    if(ad.textVariables.item("txtVar")==null)
    //if not found, create the text variable named "txtVar"
    var txtVar = ad.textVariables.add();
    txtVar.variableType =VariableTypes.CUSTOM_TEXT_TYPE;
    txtVar.name = "txtVar";
    //Set the contents of the text variables to the string "test"
    ad.textVariables.item("txtVar").variableOptions.contents = "test";
    //these coordinates don't care aboutyour units but you may adjust them to your needs
    var y1 = ad.marginPreferences.left;
    var x1 = ad.marginPreferences.top;
    var y2 = y1+5;
    var x2 = x1+25;
    var myFrame = ad.pages[0].textFrames.add({geometricBounds:[y1,x1,y2,x2]});
    //Set the contents of the frame to the text variables "txtVar"
    myFrame.contents=ad.textVariables.item("txtVar").variableOptions.contents;
    //You may want to stylize the txtVar
    //In this case, either you use a existing characterStyle or you create one in the script
    Bye Loic

  • Move value from one listbox to another listbox

    Hi,
    I have two list boxes with list of values in it. Can anyone help me to move values from one listbox to another listbox on click of a button in AWT. It will be of great help if i can get any sample code.
    Thanks a lot in advance

    hi,
    do u want to move a specific item that is selected or all of the items?
    anyway the logic is very simple!:)
    if u want to transfer the currently selected itme form the first List box,
    use the method getSelectedItem() to get the currently selected item.
    then keep this value in a String variable (item)
    and use getItemSelected() to get the Index of it in int.
    keep this value in an int variable (index)
    then delete the item from the first list using the method remove(index) on the first list object.
    then add the item to the second list using
    add(item) on the second list object.
    hope u can work it out urself from here!
    rgds
    JP

  • Move text from one artboard to another

    Hi I have 3 artboards open and am trying to move text from one artboard to another, each piece of text is on a different layer, but when I use the selection tool and just drag it across to the next artboard, nothing shows up.  How do I move text from one artboard to another?  Thanks

    Dont worry I now have it sussed.  I just needed to move the layers up in the stacking order.

  • Move tracks from one project to another?

    I'd like to know if there's a way to move tracks (with or without inserts, automation and other stuff) from one project to another.
    I have a project containing a working mix of a song that I've spent many hours assembling. One of my bandmates sent me parts he tracked in GarageBand, two audio tracks and one track using a MIDI instrument. I imported the GB file into LE and made some edits. I'd like to bring those three tracks into my current mix.
    I understand that I can bounce each track out individually, then re-import them on new tracks in the mix project, but this means turning off all the inserts and EQ on each track and blah blah blah, it seems like there must be an easier way. Being able to directly move or import the tracks would preserve my editing flexibility in a way that bounces won't.
    Please, any suggestions may prove valuable.
    Thank you for your time.

    ...let me also re-emphasize: the GB2 file was imported and converted and tossed. I am trying to move tracks from one Logic Express project to another Logic Express project.
    Just to be perfectly clear.

  • How to move BLOBs from one table to another ??

    Hi All,
    I am trying to move blobs from one table to another, however my insert statement is not working. What i mean is its running, but records are not being inserted into the table.
    This is my first time moving blobs, so please bear with me.
    here is my insert statement:
    INSERT INTO CASES.FILESTORAGE
    SELECT      DID,
              DRENDITIONID,
              DLASTMODIFIED,
              DFILESIZE,
              DISDELETED,
              BFILEDATA       // this attribute is the BLOB
    FROM      USSC_CASES_TMP.FILESTORAGE
    WHERE      DID NOT IN (SELECT DID FROM CASES.FILESTORAGE);here is the DDL for the table.
    CREATE TABLE "USSC_CASES_TMP"."FILESTORAGE"
        "DID"          NUMBER(*,0) NOT NULL ,
        "DRENDITIONID" VARCHAR2(30 CHAR) NOT NULL ,
        "DLASTMODIFIED" TIMESTAMP (6),
        "DFILESIZE"  NUMBER(*,0),
        "DISDELETED" VARCHAR2(1 CHAR),
        "BFILEDATA" BLOB,
        CONSTRAINT "PK_FILESTORAGE" PRIMARY KEY ("DID", "DRENDITIONID")
      );CASES.FILESTORAGE table has the same DDL, but in a different schema.
    Thanks in advance.

    If this seems rather straight forward. If the schema are exact simply execute:
    inset into [destination] select * from [source] ;if something is amiss you should be throwing errors someplace* but try this:
    create table [scratch table name] as select * from [source table] where [place some limit here] ;If this does not work then something someplace is very wrong and if you are not the DBA you need to get this persons attention, fairly quickly. I would do the above from sqlplus and then after each statement would:
    commit;then check to see if it succeeded.

Maybe you are looking for