HELP! Trying to print on an envelope (logo/return address), but when change page/paper size, prints blank page
Before now, I have really only used Acrobat to convert and send uneditable documents (just to give you an idea that I am not used to trying to edit docs or print them out in paper sizes other than 8.5 x 11. However, I have a document (created by a graphic designer) that was designed to be viewed as a sample, not really to be printed and now want to print it directly on an envelope. I have created a custom paper size in the Print Setup menu and have also cropped the PDF page size to be similar (although not exact) to the envelope size. When I try to print it, my printer prints out a blank page.
Any thoughts?
You need to select the paper size in the printer setup that corresponds to the letter size that you are using. If you just crop to the approximately correct size you may find that the orientation of the page is wrong and various scaling options in the print dialog box can further confuse the issue.
Similar Messages
-
I'm trying to setup a printer go wireless through my airport extreme, but every time I try to print the printing file gets paused. I'm in loop. PLEASE HELP! (The printer is a Brother 7020 monochrome)
I had the exact same problem
It turns out I was using a 20 foot USB cable between the printer and the Airport Extreme and the signal had become to weak to work. Try using nothing more than a 6 foot cable or try a new cable -
I have tried to cancel my contract for acrobat pro subscription, but when I follow the instruction, I only get circled around. Also on the phonme I never get an answer. Can you help me? Does anyone have a fax address where I could place my cancellation ?
Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html -
hi i'm trying to backup my iphone 4s and usually can but when i go into itumnes now and select device. it dissapears and does notjing? it doesn't give me the screen to select 'back up'. Please help
Hey there MissVs,
It sounds like you are clicking your device in iTunes but it is disappearing and preventing you from backing up your decive. I would recommend the troubleshooting in the following article to help troubleshoot the issue named:
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
You can also backup your iPhone from the File menu:
Make sure your computer has the latest version of iTunes.
Connect your iOS device to your computer.
Choose File > Devices > Back up.
If you're using iTunes 10.7 or earlier, right-click the device from the list and choose Backup Now.
From: iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Thank you for using Apple Support Communities.
Take care,
Sterling -
On my iPad, I'm trying to open a PDF from Safari with iBooks, but when I choose "Open with ..." in Safari, only Pages and Dropbox show as options. I'm running iOS 7.1.2 and iBooks 3.2. I have rebooted the iPad and that did not help, and reinstalled iBooks, which also changed nothing. Thanks for any ideas!
Yup, it was uploaded to our school Wiki as a PDF, and Pages did open it. I was then able to move it to iBooks, but I'd rather avoid the extra steps.
-
I've always had PSE 7.0, but I guess my computer has an issue reading the Installation CD I have for it, so I tried to manually download it from the official website, but when I go trough the whole process, it does not want to accept my product key number... What do I do?
It's either my computer because it's old, or something is wrong with my cd installer. I don't know, but I just want to install my PSE 7.0, but it does not work even on the official website with my product key #.
PLZ HELP ME!I've always had PSE 7.0, but I guess my computer has an issue reading the Installation CD I have for it, so I tried to manually download it from the official website, but when I go trough the whole process, it does not want to accept my product key number... What do I do?
It's either my computer because it's old, or something is wrong with my cd installer. I don't know, but I just want to install my PSE 7.0, but it does not work even on the official website with my product key #.
PLZ HELP ME! -
I have just upgraded to windows 8.1 but my photoshop elements 11 now will not let me change the paper size and type in the print properties. Also some of the property popup boxes just flash on the screen but do not stay displayed!
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
The D7100 requires Camera Raw 6.5 which is compatible with CS5.
In CS5, click Help > Updates to update Camera Raw to 6.7 and you'll be able to open and edit Raw D7100 NEF files. -
I m trying to add my gmail acoount to mail app but when i click on next button it is showing following message, cannot connect using ssl, what to do???
Some of the following may help:
How to enable imap: https://support.google.com/mail/troubleshooter/1668960?rd=1
For your username, did you enter the full name including "@gmail.com"
Do you have gMail 2-step verification turned on? If so, you need to use an application-specifc password instead of your normal password if using a mail app: https://support.google.com/mail/answer/1173270?hl=en -
I am running LR 4.4 on a iMac with OS X (Yosemite). Everything works in the develop module but when i get to the print module, clicl on print and the apple print dialogue box opens, and I click onn print there, the app closes. It has now happened about a dozen times. I have downloaded LR 4.4 from the internet but the problem continues.
Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode? -
I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks
Hi j2399123,
It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
For the QuickTime recording options, check out "Recording with QuickTime Player" in
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
http://support.apple.com/kb/ht4024
And for screen recording specifically, there's
QuickTime Player 10.x: Record your computer’s screen
http://support.apple.com/kb/PH5882
Thank you for thinking of Apple Support Communities for your support needs.
Nubz -
I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?
You need to use the right arrow on the remote to go all the way to the right. The submit button will be highlighted and you can then press select on the remote to proceed.
-
i am trying to sync my iphoto events with my iphone, but when i do, it says the required file cannot be found.. how do i solve this problem?
Try erasing the iPod photo cache.
http://support.apple.com/kb/ts1314 -
having problem buying online.need your help since it's my first time here.apple is asking for my billing address but when i enter my address here in qatar,it's saying i should enter a valid zip code within the u.s.does it mean i can't buy online even if it wil be shipped within u.s. only?
To buy in for delivery in Qatar, you should be starting from the Apple Qatar site:
http://www.apple.com/qa/
Do you have an Apple-ID? if you do, then you should not have to enter your Address again, and may be able to sidestep the US Zip Code issue. -
Hi
I am trying to update my ipad from ios 4.3 but when connected to itunes I get an error message saying that the internet is not accessible when it is. How do I resolve this?Disable your firewall and antivirus software, restart your iPad, quit iTunes, restart your computer and then try to update again.
-
When i try to print a perfect bound for my 66-paged document it keeps creating two new blank pages
When i try to print a perfect bound for my 66-paged document it keeps creating two new blank pages, how do i remove that 2 blank pages?
That is essentially a 2 up format as shown.
2 pages duplex will equate to 4 pages per sheet.
Your document needs to be divisable by 4. Add two blank pages at the end of your document.
Toggle "Print Blank Pages" from the Print Settings
Remove the blanks after creating the booklet.
Maybe you are looking for
-
Wireless internet access issues
Hi All, Now that I have the back up battery issue resolved and my mac works again, need some help with my airport connectivity. I have a circa 2000 Imac DV, using OS 9.1. I just purchased and installed an airport card. I used to use dial up internet
-
Multimapping to IDOC 1:n via IDOC bundling: Problem
Hi, Trying the above procedure to send several IDOCS as one bundle to R/3. I followed note 814393 and also checked with weblog https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2762. [original link is broken] [original link is broken] [original l
-
Software update doesn't take; connecting to server goes on without end.
I get the prompt to update FF, but when the software update screen comes on, it indicates "downloading Firefox" and shows "connecting to the update server," but it never seems to connect. I've let it run for quite a while (15 mins) and it just keeps
-
Does anybody have encountered this problem, and if so, do you have a solution I could benefit from? Thanks Amzerv
-
Split pictures into a new event?
I took two sets of pictures, one last night and one today. When I imported the pics into iPhoto, I was hoping it would split them into two different events, since they were taken on different days, but it imported them all into a single event. How ca