HELP! Two problems - internal speakers and a bar that won't go away!

I have just bought my new 3G iPod Touch, but now the internal speakers don't work. I haven't done anything, but suddenly after I had had the headphones in and used external speakers, it won't play out loud without the headphones or speakers attached. The volume bar is completely gone, when I take out the headphones, and there were no problems before.
Also, in the "now playing"-page I somehow made a bar come up that shows elapsed time, repeat, Genius and shuffle, but now I can't make it go away since I have no clue how I made come up in the first place. It wasn't there from the beginning, so hopefully somebody can tell me how to get rid of it again? Or I would rather just know how to turn it on and off as it probably can be useful.

Type command + option + esc (all three keys together).
You will see a new pane called Force Quit Applications. In that pane select, one at a time, anything you do not recognize, and click Force Quit.
Finally, select Finder and Relaunch.

Similar Messages

The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail. Help?

The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail.
The iPad was bought in mid-June, but I did not get extended Apple-Care warranty on it. Any idea of what's happenening?

Multiple means how many? If only 2 or 3, they could all be faulty. Try the headphones in some other device, to make sure they are OK. Or there could be something wrong with the headphone port.
Your iPad is still covered by the 1-year warranty so you should make a Genius appointment and have it looked at.
Another thing to try is to plug in the headphone jack a few times in succession to see if it frees up something inside the port.

Simultaneous sound: how to get sound from internal speakers and usb audio adapter

I have an iMac in my living room. It is hardwired to my home theater system in my family room. Currently, I can listen to audio in one location or the other... but not both. I bought a StarTech.com ICUSB Audio Adapter hoping that it would be a fix... not so much. Downloaded SoundSource... not so much
How can I get audio to play via my internal speakers and through my home theater system? Hosting a party this Saturday and would like multiple rooms filled with sound.

First pluging is headphones and then unplugging it. If yu can't get it fully inseted tham may indicate that end of a plug is broken off inside the jack.
Then if not above problem, try the standard fixes:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If you still have the problem then an appointment at the Genius Bar of an Apple store is in order.

MacBook Pro won't automatically switch between internal speakers and display audio

I have a MacBook Pro that connects to a LED Cinema display. It used to automatically switch between internal speakers and display audio when plugged in to the display but won't anymore. I have to manually change it in System Preferences --> Sound. Does anyone know how to make it do that again?
thanks,
Ben

I just want to add, I have the same problem, and just want to help raise awareness of it.
1st, the problem only started recently (have been using the Thunderbolt display since it was released), I did not have this problem, and noticed it beginning only in the last month. (since January)
2nd, My particular setup, includes a hard drive attached to the firewire port on the back of the Thunderbolt Display (so, I am wondering if anyone else experienced this problem with a firewire drive being connected).
     My full setup:
          Macbook Air (2011)
         Thunderbolt display
          Western Digital drive (attached to firewire of display)
3rd, If I go into settings, what I will see is the "Display Audio" is selected (but no sound coming out),
If I then select "Internal Speakers," a buffered "history" of all the sounds I did not hear is then played (pretty funny actually) - for example, if I sent mail, adjusted the volume, and started playing a song.... it immediately plays all those sounds when selecting "Internal Speakers"
4th, If i then select "Display Audio" - it does nothing
5th, what I have to do, to resolve this is: eject all my hard drives, disconnect the thunderbolt cable, then reconnect the thunderbolt cable, and everything works as normal.

Internal speakers and headphones are not working

I have hp g6 2231tx os Windows 8, brought it a month ago..now it's internal speakers and headphones are not working..I enabled in playback device from sound mixer and reinstalled drivers but still not working..it's because of hardware or software??

Hi,
It could be either Hardware or Software related, so try the following and let me know.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58517.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hearing both internal speakers and headphones

HP Pavilion g6 series laptop, windows 7
I am hearing both internal speakers and headphones when headphone is plugged in and only want to hear headphone.

I hate bumping but, this is still a problem, any suggestions?

Ipod touch 4G problem--internal speakers not working.

Ipod 4g internal speakers failing after one month. Ipod was "rebooted" which helped for a few hours, then restored, which helped for about 1-2 hours, each time internal speakers worked for a while then stopped, Now rebooting useless, I suspect that restoring it again will allow internal speakers to work, but that takes 2-3 hours.
We can use the earphones via the jack, but want to use the internal speakers.
Have the latest operating system (version 4.3.2), and exclusively sync with itunes on Mac platform. 3 other ipod touches (3rd gen) in house work perfectly. The sound is on, bluetooth is not enabled (no bluetooth devices in home anyway and have never set it up on this ipod touch).
Any ideas besides spending 3 hours restoring each time the internal speakers fail? I have used air to blow out the earphone jack but that didn't help either. One application (line up 2) correctly indicates when the earphone jack is used and when it is not in use.
Will be getting a call from apple tomorrow, I suspect that will need a new ipod touch 4g.

you've exhausted all of the troubleshooting steps then it really needs to be replaced if it's still within the warranty.

Using internal Speakers and optical Output at the same time ?

Hello,
is it now possible to use the internal Speakers and optical Output at the same time ?
Is this a software or hardware limitation ?
Every day im disconnecting the optical output. It can't be good for the contacts. I wont spend over 100 euros buying an external soundcard to solve this problem.
Any Ideas ?
Thanks ? best regards
mc
IMAC 24 Intel Mac OS X (10.4.8)

New Discussions ReponsesThe new system for discussions asks that after you mark your question as Solved. You should take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
Alternatively, you can change the status to Answered.
If we use the forums properly they will work well...

TS1559 I have this problem explained above, and the solution that is given on this website didn´t work for me. I need help...

iOS: Wi-Fi settings grayed out or dim - Apple Support
I have this problem explained above, and the solution that is given on this website didn´t work for me. I need help...

iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

Can I play sounds to internal speakers and an output device?

Can I output Sounds (say from Spotify) to internal speakers and an an external device at the same time?

I found another solution in this thread http://forums.macrumors.com/showthread.php?t=695360
Again you need the rogueamoeba guys.

Using Mountain Lion iOS and audio output will not change from internal speakers to AppleTV so that sound can come from TV speakers, why??

I am using Mountain Lion iOS and trying to connect my MacBook Pro to my plasma TV using AppleTV and AirPlay mirroring. The video does just fine. However, there is no audio coming from the TV. After activating AirPlay I try to select Apple TV as the audio output in System Preferences and it highlights it but then immediately goes back to Internal Speakers and only has sound coming from the MacBook Pro..
What's going wrong ?????
AJ

Are you sure that WIFI network doesn't have an AppleTV on it? Just because you don't own it doesn't mean there isn't one on that network. The laptop or better said the OS cannot differentiate between an AppleTV that you own or not. If it sees one on the network, it will show you one as being available. The automatic reconnection is happening probably because the last time you streamed to an AppleTV, you didn't drop that connection before sleeping the computer or shutting down iTunes.

Internal speakers and audio output gone from System preferences

i can't get macbookpro 2010 to recognize internal speakers and audio output. only optical OUTPUT. CAN'T GET ANY SOUND EXCEPT FOR OPTICAL PORT

yes it is on, i have tried reinserting headphone plugs to possibly release micro switch but no avail. i tried resetting PRAM and that also did not work. this just happened over the last day or so. can't figure out what made it do this. i have no optical device, so the switch shouldn't have triggered.

Software switch between internal speakers and digital out?

I have a brand new Aluminum iMac.
My iMac is connected to my stereo receiver with the built-in S/PDIF Digital Output.
But sometimes I'd like to just use my iMac's internal speakers, so I don't need to power up the receiver.
But when I plug in the digital cable, OS X turns off my speakers, and vice-versa. The Sound Control Panel doesn't give me the option.
I've googled for a while on this -- it looks like Windows leaves the digital output on even if the internal speakers are playing, so this is clearly a software issue.
Is there any way I can use software in Leopard to switch between my internal speakers and my digital output? (Or to use both at once?)

Funkey Monkey wrote:
Isn't there a software option out there somewhere?
I don't know fore sure, but I believe inserting a plug into
the audio output jack electrically disconnects the speakers.
Yep, totally brain-dead -- but so is the entire analog/digital
"combo jack" nonsense. It leaves you with no way to monitor
any digital audio signal being sent to an external device.
Not with headphones OR speakers!
IMO, the only workable solution is a USB or Firewire
audio interface. If you only need digital audio output,
the cheapest stuff available ($25-ish) should be fine.
If you also want good 24-bit A2D/D2A converters, mic
preamps, etc. expect to pay $150 and up.
..."clever" is usually the opposite of "smart",
Looby

Hi, I downloaded Yosemite this evening. I downloaded o.k., it installed o.k. and then it restarted the Macbook and now it seems frozen. There is nothing but a grey screen, the apple logo and a bar that is half black

Hi, I downloaded Yosemite this evening. It downloaded fine, it installed fine and then it restarted the Macbook. Now it seems to be frozen. I have nothing but a grey screen with the apple logo and a bar that is half black and half grey. It's been like this for over an hour. Should I worry or is it still working at something? How do I fix this if it's not still working at installing something. Thank goodness for this poor old pc as backup.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

HT201363 When I sign in to my Apple ID in "My Apple ID" and go to "Passwod and Security" I should answer the security questions but I don't remeber them and the bar that says "send to rescue email" doesn't show !! How could I recover the questions??

When I sign in to my Apple ID in "My Apple ID" and go to "Passwod and Security" I should answer the security questions but I don't remeber them and the bar that says "send to rescue email" doesn't show !! How could I recover the questions??

You will have to contact iTunes Support and tell them you have forgotten your Security Questions and need them reset. They will respond to you by email, usually within 24 hours. Here are two links to contact iTunes Support:
http://www.apple.com/support/itunes/ww/
or by email:
http://www.apple.com/emea/support/itunes/contact.html
Cheers,
GB

HELP! Two problems - internal speakers and a bar that won't go away!

Similar Messages

Maybe you are looking for