HELP!  Unable to disable email notifications

Help!
I am still receiving email notifications after I selected no more notifications.  I just came back from a 4 day trip to find more than 200 adobe postings in my email box.  I don't want to change my email address.  What can I do?

You have to unsubscribe to every topic you are subscribed.  I don't know why you got so many, as you have only one previous post.
If you cannot unsubscribe, post your request in http://forums.adobe.com/community/general/forum_comments - the forum administrator may be able to help you.

Similar Messages

  • How to disable Email Notifications as default?

    is there a way to disable email notifications so it works the other way (I enable it on any threads I want, NOT have to keep turning it off on every thread, every time I make an edit)?
    thanks...

    thanks, if this does it i will edit it as answered...

  • Disable email notification of changes of events in iCal?

    I have a shared calendar that some of my colleagues subscribe to on iCal.  Whenever I make a time change to an event or add a new event on my shared iCal, one of my colleagues gets an email notification about it (sometimes he's getting 10 emails a day about my iCal).  Is this a setting I can change on my end or is it something that he needs to change. (BTW - I am not getting any of these emails)
    Thanks so much!
    Lauren

    Hi Lauren.  I think I figured this out.
    I share my calendar with my wife and two kids.  One kiddo was upset he got so many calendar changes.  The other didn't get any emails.  From what I found, your colleague needs to do this in iCloud (I hope this is how you share calendars or I'm wrong!).
    Once your colleague logs in to his iCloud account and goes to his calendar, click on the green 'broadcast' icon to the right of YOUR calendar (your calendar should be listed on the far left side of his iCloud calendar window).  Once they do this, a pop-up window should appear and a check box at the bottom of the window says 'Email me when this calendar changes'.  Uncheck that and they shouldn't get any more emails when you change times on your calendar.  The downside is I don't think they'll get an email alert when you create an event as well.
    I hope this helps.
    ~Brent

  • How to disable email notifications in Mavericks Calendar

    How do I disable the default setting in Calendar which sends email notifications?

    Go to www.icloud.com and log in to your calendar. Click on Preferences -- Advanced and un-check Email me shared calendar updates.

  • Users unable to get email notifications on followed sites, or documents: System.IO.FileNotFoundException and Microsoft.SharePoint.SPSite.InitUserToken(SPRequest request) errors

    Hi Community
    I have an issue on a live SP2013 farm that is really causing me grief.  Although  I ( Farm Admin)  and my other users can follow items which are subsequently  confirmed in our respective News Feeds - 
    none of my users are are actually getting emails notifications . 
    Alerts ( did) work fine.
    I have written some PS to vew and set  the SPS-EmailOptin for each user
    $up[$upManagerAttribute].Value = $managerNTName
    # check if the email check boxes are unchecked '1' then if so check all
    write-host -fore white "User Profile for user"$NTName "Now has email opt in currently set to" $up[$upEmailOptin].Value
    if ($up[$upEmailOptin].Value -gt 0)
    $up[$upEmailOptin].Value = 0
    write-host -fore white "User Profile for user"$NTName "Now has email opt in all checked."
    Very few are unchecked. $up["SPS-PrivacyActivity"].Value = 4095  is set for all users as in
    the the privacy settings on the newsfeed are all checked
    For my currrent client I  set up a development intranet which had the seperate web apps for the main portal and mysites. Test users were able to follow documents, sites without any problems.  Before go live I was asked to accomodate a requirement
    where there is only one web application (don't ask!)  effectivley http://myintranet 
    so mysites sits under http://myintranet/mysites .   I  made the appropriate changes to my AutoSPInstaller scritpt and al appearedd l good : services , Service appplications, mysites are all started.  I am using
    the two app pool accounts  one for the portal and one for mysites.
    A quick look at the the releated threads on this forum indicated permssions could be DB permissions  related tho I  am not seeing anything in ULS to strongly point to this
    $webApp = Get-SPWebApplication http://myintranet
    $webApp.GrantAccessToProcessIdentity("mydomain\SP_ProfilesAppPool")
    - checked and SPAcess Data is given to the mysites app pool accout to the portal web app .
    I am seeing some odd errors in ULS
    Ignoring the space ' critical' warning which I have flagged up to Ops and  I doubt is my real problem.  The errors I see that are related are :
    System.IO.FileNotFoundException: The system cannot find the file specified. (Exception from HRESULT: 0x80070002), StackTrace:
    at Microsoft.SharePoint.SPWeb.GetList(String strUrl)
    at Microsoft.Office.Server.Microfeed.MBUtilities.GetPublishedFeedListPrivate(SPWeb web, String relativeUrl)
    at Microsoft.Office.Server.UserProfiles.FollowedItem.CreateFollowedSite(SPWeb site, FollowedItemData data)
    at Microsoft.Office.Server.UserProfiles.FollowedItem.Create(SPSite site, SPWeb existingWeb, Uri url, FollowedItemData data)
    at Microsoft.Office.Server.UserProfiles.FollowedItem.RecreateByReferencedItem(SPSite site, SPWeb web)
    at Microsoft.Office.Server.UserProfiles.FollowedContent.RefreshFollowedItem(FollowedItem item, SPS2SAppExecutionPolicy policy)
    at Microsoft.Office.Server.UserProfiles.FollowedContent.Follow(Uri url, FollowedItemData data)
    at Microsoft.Office.Server.UserProfiles.FollowedContentServerStub.InvokeMethod(Object target, String methodName, XmlNodeList xmlargs, ProxyContext proxyContext, Boolean& isVoid)
    at Microsoft.SharePoint.Client.ServerStub.InvokeMethodWithMonitoredScope(Object target, String methodName, XmlNodeList args, ProxyContext proxyContext, Boolean& isVoid)
    at Microsoft.SharePoint.Client.ClientMethodsProcessor.InvokeMethod(Object obj, String methodName, XmlNodeList xmlargs, Boolean& isVoid)
    at Microsoft.SharePoint.Client.ClientMethodsProcessor.ProcessMethod(XmlElement xe)
    and
    5b93b0ef-b1ff-437d-b674-5285be9b9395 Stack trace:
    at Microsoft.SharePoint.SPSite.InitUserToken(SPRequest request)
    at Microsoft.SharePoint.SPSite.SPSiteConstructor(SPFarm farm, Guid applicationId, Guid contentDatabaseId, Guid siteId, Guid siteSubscriptionId, SPUrlZone zone, Uri requestUri, String serverRelativeUrl, Boolean hostHeaderIsSiteName, SPUserToken userToken, Boolean appWebRequest, String appHostHeaderRedirectDomain, String appSiteDomainPrefix, String subscriptionName, String appSiteDomainId, Uri primaryUri)
    at Microsoft.SharePoint.SPSite..ctor(SPFarm farm, Uri requestUri, Boolean contextSite, Boolean swapSchemeForPathBasedSites, SPUserToken userToken)
    at Microsoft.SharePoint.SPSite..ctor(SPFarm farm, Uri requestUri, Boolean contextSite, SPUserToken userToken)
    at Microsoft.SharePoint.SPSite..ctor(String requestUrl)
    at Microsoft.Office.Server.UserProfiles.SPS2SAppUtility.TryOpenWeb(Uri url, SPSite& site, SPWeb& web, Boolean& inSPContext)
    at Microsoft.Office.Server.UserProfiles.SPS2SAppExecutionContext.InitializeForSite()
    at Microsoft.Office.Server.UserProfiles.SPS2SAppExecutionContext.EnsureInitialized()
    Also, I am testing with my account which does have all the mysites newsfeed options checked in the CA -> UPA ->"Manage User Profile"
    Anybody seen this whilist I follow the where those exceptions take me.
    Freelance consultant

    Hi,
    Thank you for your question. I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience. Thank you for your understanding and support.
    Thanks,
    Linda Li
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • Help needed in Workflow Email Notification

    Hi,
    I am new to workflow. I am creating a notification process in Oracle Apps 11i to send an email notification to users who registered for some training. Now how can I send an email notification to each user as the list of users can be huge i.e. > 200 . Do I need to loop through and send a notification to each user one by one or is there a way to achieve this by just sending one notification to all the users and if I send one notification to all the users how can I make sure when a user gets an email he/she don't see other users email addresses.
    Any help is appreciated.
    Thanks

    Thanks can you please tell me what will be the datatype of l_user_list.
    It's a VARCHAR2 list of users, separated by a space or comma.
    Now before creating AdHocUser do I need to check in WF_USERS table if the user with the same email address is already there then don't create that user and just add it to a l_user_list.
    Yes - you will need to have a user record first before you can add them to the role.
    If adding user to l_user_list how to make sure I am adding the right user to send notification to as there may be some other user with same name but different email that I don't want to send notification to. I only want to create a AdHocUser only if name and email address both are not already in the WF_USERS. e.g. lets say if there is a user John Doe with email [email protected] who previously attended some training. Now comes another user John Doe with email id [email protected] and is attending the current training. How do I make sure notification only goes [email protected] as he registered for this training not to [email protected] who previously attended some other training.
    How do you identify which user has registered for training - you could check email address, or use the Apps user name which is unique. Whatever you are using to determine who is registering, you will need to determine what the link is back to the user record in WF_USERS.
    Now as this procedure runs every 24 hrs then everytime it runs do I need to create a new AdHocRole and what should I name it as it can't be hardcoded. As I only want to send an email to the users registered in the current training how do I make sure notification does not go to some other user with the same name with different email who is not registered in the current training.
    If the job runs once every 24 hours, then you could use the same role each time, and clear out the users in the role before repopulating them. If not, when you create the new role (which is what I would do) every time the job runs, then store the name of the role in an item attribute, and then reference that in the notification so that the new role is notified each time. Don't forget to set an expiration date for your ad-hoc roles, though, and run a purge job periodically to get rid of the old roles that are no longer required.
    Also wf_directory.CreateAdHocUser and create a user list should be in a loop and create an adhoc role and notification will be outside the loop.
    What are drawbacks of if in a loop I just create a AdHocUser and then send notification one by one to each user rather than creating a role and in the end send one notification. Basically if there are 200 hundred users loop runs 200 times and each time notification goes.
    If you notify each individual user, then you will have a large number of notifications that are being sent - extra records in the WF_NOTIFICATIONS table, extra records on the queue which the mailer uses etc. etc. If you notify a role, then there is only one record to process.
    If it were me, I would build an ad-hoc role each time, and populate that role with the correct users, and notify the role. I would NOT be sending 200 separate notifications when one would suffice.
    HTH,
    Matt

  • Unable to send Email Notification for Oracle Identity Manager 11g for users

    Hi All,
    Can anyone please share a workaround to send email notifications when user is created through trusted recon in OIM 11G.Please Help Me out.
    \oim_user

    Hi
    Do you just create the user in OIM and not anywhere else?
    I have cofigured notification on the the target resources that i automatically assign to users as soon as they are created via trusted recon. Let say a user gets AD rersource. Ill notify whoever i want from there.
    Another way i did it was using the post eventHandler code. I call an email service to notify admins on the status of the recon and post recon eventhandlers. snippet below..
    tcEmailNotificationUtil emailNotificationUtil = new tcEmailNotificationUtil(dbReference);
    emailNotificationUtil.constructEmail(emailTemp);
    emailNotificationUtil.setBody(buildMailBody(message));
    emailNotificationUtil.sendEmail(toAddress);
    Let me know if this gives you an idea.

  • N8 - Can you disable email notification sound

    Hi all, Had this phone for about 3 days & its sending me insane.  It gives me a loud beep every time I get an email, usually 4 -5 times through the night.  ( My wife, alias "why did'nt you get an Iphone like mine") is not impresed.  When I go into main menu settings, I can press about 3 to 4 differents icons eg - settings > phone>voice commands > settings & then it goes in voice mode & I can't do a thing with it.  How can I get rid of voice commands & turn off my email notification,
    Thanks Rob

    I realise that you have 'accepted' a solution to your problem but I would like to suggest an alternative.
    There is a Free application on Ovi suite called Nokia Situations.  This allows you to set up different profiles for different situations.
    I have a profile that I called Night Time which I have set Nokia Situations to activate at 11pm and deactivate at 8am.  In this profile I have turned all sounds off apart from allowing the phone to ring if a member of my family calls.  I also get it to turn off Bluetooth during the Night Time profile and other battery saving things.  Nokia situations is very comprehensive and I guess I only use a small percentage of its features but I think it is superb. 
    I used to have to remember to switch to Night Time profile late at night and then back to General in the morning.  Now, it is all automatic.
    Hope this helps.
    History: Always Nokia since 1994 including Nokia 2140, 7110e, 6150, 6210, 6310i, 6230i, N82
    Current: Nokia N8 (Anna - I have no intention of going to Belle) - and delighted with it!

  • How Do I Disable Email Notifications For Discussions?

    I am following a couple of discussions and I would like to stop receiving email notifications when a new post appears... But for the life of me I cannot figure out how to do it! The Apple Support response I found via an Internet search appears to be for a previous iteration of the Apple Support Communities.

    Click here and turn off the email notifications.
    (117662)

  • I have disabled email notifications (alerts) from my iPhone and yet I keep getting them anyways. What am I doing wrong?

    Hello, I went in the notification center and disabled all alerts and sounds from my 2 mailboxes. It worked for my work mail account, but not for my private account. I keep getting incoming email alerts on my screen. I have turned my phone off and back on hoping it would register the change, but it hasn't. Any ideas on what might be wrong or what I forgot to do? Thanks a lot!

    Something doesn't seem right here. If she has to use her email address as her contact address in order to message with you, that suggest to me that she either doesn't meet the requirements to use her iPhone number as the contact address (iOS 6 or later with an iPhone number linked to her Apple ID) or there is an issue with the way the phone number is being entered.

  • How the disable email notification pop up

    Every time i receive a new email I get a small white window pop up notification telling me who it is from etc. how can i turn this off. I've gone into the notification settings and turned off the show preview.

    Go to Settings > Notification > Mail > Email Account in Question > and then change 'Alerts' to None or Banners.  Also turn off 'Show on Lock Screen'.

  • I disabled email notifications, but continue to receive them.  Suggestions

    receiving email in Yahoo

    Try a restart.
    a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • Help turning off email notification please

    Can someone please help me turn off email notification.
    I have checked and unchecked the email notification to the right of the posts numerable times. It does not seem to matter whether that says stop email notification or receive email notification. I have also turned them off in my user profile and I continue to get email notifications constantly.
    Thank you,
    Leslie

    Hi,
    I don't get any. Here is my forum setup.
    I turned it off in the forum sidebar...stop e-mail notifications... and in "Your Stuff"...Preferences.
    My forum sidebar currently looks like this:
    e-mail notification preferences currently look like this...be sure to hit "save" to update the change.

  • How to Unsubscribe from Discussion Email Notifications

    This is really an addendum to the excellent tip posted by Frank Caggiano, titled Stopping emails from ASC. I tried to add this as a Comment to his tip, but apparently comments are closed (or I'm being dense, which is always a possibility ).
    One of my reasons for posting, is that I had this very question but I could not find an answer searching through Apple Support Communities. My problem, in retrospect, was that I was searching using the keyword "unsubscribe," which does not appear in Frank's post (not that it should; there are many ways to describe this situation). So, I am hoping that a tip with "unsubscribe" in the title will help users who, like me, will search for information about "how to unsubscribe from discussion emails" or the like.
    I encourage you to read Frank's post (clicking on the above link opens a new window) because he explains a method for addressing this problem very well, complete with nice screenshots.
    To be clear, the situation addressed in this post is the one in which you keep receiving emails from Apple Support Communities Updates ([email protected]) notifying you of a new post to a discussion you are following. And, for whatever reason, e.g., you're receiving too many emails or the discussion has gone off on a tanget, you want to stop receiving those email notifications.
    I initially went to:
    Your Stuff > Preferences > Email Notification Preferences,
    and checked off "no" to each option. I thought that would do the trick.
    Wrong.
    Unfortunately that did not work because, I finally figured out, I was in the wrong "email notifications" area. Here is the correct procedure (some repetition here from what Frank posted but, the following also includes an alternative method):
    Go to: Your Stuff > Profile tab > Manage email notifications (on right, under "Actions") > Click box next to the discussion you are watching, and for which you want to stop email notifications > Click "Remove Selected Notifications"
    OR
    Go to the discussion you are following (the one you are receiving emails about) > then, on the right side, under "Actions," click "Stop email notifications"
    Best Regards,
    Mark

    Try this link:
    http://helpx.adobe.com/x-productkb/global/disable-email-notifications-forums.html

  • Droid Incredible Unable to Send Email

    I just got the DI and I cannot get it to send e-mail (it receives e-mail fine) on 2 different POP3/SMTP accounts.  I have verified the settings for each account, comparing it to what the same account in Outlook (which works fine), so I know the settings are correct.  I have tried deleting the accounts from the DI several times and have tried removing the battery and rebooting the phone.  Nothing has worked this far.
    Any suggestions?
    Thanks for any help.
    Brent

    The providers are 2 different Exchange servers from 2 different businesses that I do work with. 
    What settings are typically different when using a mobile device?  I have matched the settings that I have in Outlook as far as the server name, port, username, password and requiring authentication.  I am coming over from a BB device where I just put in e-mail account and password and everything worked.
    Since I can receive OK, I am assuming that something is wrong on the SMTP side of things.  When going through the settings on the DI, all of them appear to validate successfully but then when I try to send something I get the "Unable to send email" notification. 
    Thanks for the help.

Maybe you are looking for

  • Possibility to restrict interest calculation on open items only

    Hello All, How to restrict calculation to Open Items only via configuration when the system calculates interest on arrears. I have checked the options for interest on arrears and there is no option to restrict via customizing.Ofcourse, there is an op

  • XSDs/DTDs for BI reports xml

    In Oracle BI Answers, in the Advanced tab, it' possible to see / define the XML (saw:criteria, saw:columns, saw:views etc). The saw:report root node defines two Siebel XML namespace : xmlns:saw="com.siebel.analytics.web/report/v1″ xmlns:sawx="com.sie

  • Dip in the MAP of the material

    Hello, In my requirement, we find there is a dip in the price for the material. In the report "MB51", there are only three movment types - 101 / 351 / 601. Here 101 is carried out against production order and the price of the material is same as MAP

  • 11g: How to show vertical gridlines and ticks only on full hours?

    Hi, continuation of read-only preview thread dvt:graph How to show major ticks on X-axis only for full hours? Katarina, I tried your suggestions with mixed success. Here my starting code: <dvt:graph binding="#{backing_lmrg0001.graph11}"              

  • OrainstRoot.sh not present in /tmp directory

    I am getting the message run /tmp/orainstRoot.sh as root before proceeding. However I cannot find the orainstRoot.sh file in the /tmp directory. This occurs after I select the UNIX Group Name in the OUI. Can anyone help?