HELP Unable to Install Red Hat Linux!
Hi there !
I'm getting the following message trying to install red hat linux 8.0: " There was an error installing glibc commom 2.2.93-5. This can indicate media failure, lack of disk space and hardware problems. This is a fatal error and installation will be aborted . Please verify media and try you install again"
I already tried media test and several inst. options and still get the same error. Suspect of hardware incompatibilities!
Help will be greatly appreciated ...!
There was a media problem. The disk on which installation was taking place has bad blocks.
Disk was replaced and installation was succesful !.
Thanks anyway ....!
Similar Messages
-
How to Install Oracle on Red Hat Linux?
My System is having P4 1.8 GHz Processor with 128 MB RAM, 40 GB HDD(7 GB Linux Partition + 1 GB Swap Partition). I have installed Red Hat Linux 9(Server). Now, I want to install Oracle 9 on this syste. But I don't know how to install it. Anyone who knows this, plz, mail me the necessary system requirements alongwith some settings, if any. My Email ID is [email protected]/[email protected]
I think you'll have some problems with 128MB RAM.....<br><br>
:P Nonsense, but I do hope that hard drive is one of those new, fancy flash hard drives, otherwise the system will spend so much time swapping that it won't get past the installer. -
How to install ECC IDES in RED HAT linux version 5
Hai..
I would like to install ECC IDES in linux OS. I dont know Linux. So it is difficult for me to install.
I am having 500 gb HD.and in that 30 GB allocated as NTFS for WinXP.
Left space(470 GB Free) for linux and ECC IDES.
I want to know - how to partition this 470 GB in linux. I dont know which file system should be allocated and how it should be partitioned. I am using RED HAT LINUX Version 5.
i need a step by step process to install red hat linux with proper(file system) partition and
I need a step by step process to install IDES with Linux commands.
Thank You
Regards
R.Thillai Govindarajan> i need a step by step process to install red hat linux with proper(file system) partition and
> I need a step by step process to install IDES with Linux commands.
Get the official installation guides at
http://service.sap.com/instguides
However, they won't contain "now enter command X and now enter command Y". You will need to have a basic understanding what you are doing before you can install a SAP system (and the database).
Markus -
Hi,
I hope that someone can help me. I am having so much trouble
getting FMS to work it is unbelievable.
We have installed FMS onto virtual server running Red Hat
Linux Enterprise 3. We have managed to get
FMS running but cannot get a connection to work. This is
using the sample application 'textchat'. here is a summary of what
we and a coleague have done.
1) I have linked the libraries to obtain the desired
libssl.so.4,
libssl.so.6, libcrypto.so.4 and libcrypto.so.6.
2) I have installed the lates mozilla firefox and the latest
flash
plugin (together with the update-flashplugin)
3) Then I have created the installation by adding the
following entry:
/etc/redhat-release together with it's content
4) Then I have performed a regular fms installation together
with adding
the licensing etc. I have also copied the textchat main.asc
file and the
textchat pages (swf and html)
So basically we have added all the missing libraries (that we
know of...cmon adobe get it together £3000
and you don't even include relavent libraries) .
If any body has any ideas please reply. we are almost a month
down the line struggling with this software.
Thanks for an help
PaulGot Oracle Grid Infrastructure 11.2.0.3 to work on Red Hat Enterprise 6.3 Linux with out using asmlib and oracleasm.
SQL> alter system set asm_diskstring='/DATA/','/FRA/' scope=both;
SQL> show parameters asm_diskstring
NAME TYPE VALUE
asm_diskstring string /DATA/, /FRA/
SQL> create diskgroup FRA external redundancy disk '/FRA/';
Diskgroup created.
SQL> select name,state, total_mb, free_mb from v$asm_diskgroup;
NAME STATE TOTAL_MB FREE_MB
DATA MOUNTED 500,000 494,000
FRA MOUNTED 200,000 194,000
The issue I had encountered that was that I tried to install and configure Grid Infrastructure the way that I had previously using Red Hat Linux 5.5, 5.8 and then 6.0. I had decided to install Red Hat Linux 6.3 which does not support Oracle asmlib and oracleasm to keep up with the technology and to be innovative.
Oracle has added significant enhancements to Grid Infrastructure. The only way to become aware of these enhancements is to "Do It". I've documented this implementation and will now -
Oracle 8.1.7 on Red Hat Linux on a Dell Poweredge
We have a Dell PowerEdge 6400 server with PERC 2/DC raid
controllers.
We have installed Red Hat Linux 6.2.
According to the installation guide in order to install Oracle
8.1.7 we need to recompile the Kernal to get to version 2.2.19-
6.2.7.
Recompiling the Kernal causes a failure in the Raid controllers.
I realise that this isn't strictly Oracle but I wondered if
anyone had met this problem before. It appears virtually
impossible to configure this combination to support Oracle.Yes there is a lot of information out there. Oracle 8.1.6,
8.1.7, 9 on Linux 6, 7, 9.
Which glibc? binutils? compat-libs?
For 8.1.7 on Redhat 9
Please try: http://www3.sympatico.ca/arothmel/oracle/817.html
Still evolving. Feedback welcome :) -
OSP support for Red Hat Linux Advanced Server 5.0
Wondering, if anybody tried to install Red Hat Linux Advanced Server 5.0 with N1 SPS OSP? Does it work as with Red Hat Linux Advanced Server 4.0?
Thorleif WiikThe current official GA date for SPS 6.0 is Aug 20. There is a follow-on release for plug-ins and the MS/CLI on Windows. This is currently scheduled for some time in September.
-
Help with installing pre-requisite packages on Red Hat Linux
Having issue with installing packages with yum
OS is RHEL 6 and following package which are prerequisites for Oracle Fusion Middleware install on Red Hat Linux 6
uname details as follows
2.6.32-220.el6.x86_64 #1 SMP Wed Nov 9 08:03:13 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
Example error: yum install gives error as follows for all packages.
No package compat-libcap1-1.10-1 available
Need to install following packages (as mentioned in the prerequisites)
binutils-2.20.51.0.2-5.28.el6
compat-libcap1-1.10-1
compat-libstdc++-33-3.2.3-69.el6 for x86_64
compat-libstdc++-33-3.2.3-69.el6 for i686
gcc-4.4.4-13.el6
gcc-c++-4.4.4-13.el6
glibc-2.12-1.7.el6 for x86_64
glibc-2.12-1.7.el6 for i686
glibc-devel-2.12-1.7.el6 for i686
libaio-0.3.107-10.el6
libaio-devel-0.3.107-10.el6
libgcc-4.4.4-13.el6
libstdc++-4.4.4-13.el6 for x86_64
libstdc++-4.4.4-13.el6 for i686
libstdc++-devel-4.4.4-13.el6
libXext for i686
libXtst for i686
FYI: If this forum is not appropriate please let me know appropriate forum and shall repost there.Hey,
Normally I use YUM : http://taliphakanozturken.wordpress.com/2012/03/17/how-to-use-yum-to-install-rpm-packages-with-dependencies/
Let me know if this is what are you looking for.
I hope it helps you,
Thiago Leoncio. -
JVM problem in installing oracle9i on Red Hat Linux ver 4.18
Hi ,
I am facing problem in installing oracle 9i on Red Hat Linux ver 4.18
Error are
" Initializing Java Virtual Machine from /tmp/OraInstall2007-06-10_12-11-22AM/jre/bin/java. Please wait...
Error occurred during initialization of VM
Unable to load native library: /tmp/OraInstall2007-06-10_12-11-22AM/jre/lib/i386/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference"
can anybody help me?Hi,
You should consider installing Oracle patch 4198954.
You can obtain it from Oracle Support (Metalink).
Regs,
Olivier Guyot -
How to start SQLPLUS in oracle 10g which install on Red Hat Linux AS 4
I install oracle 10g on Red hat linux enterprize AS 4. but i can not start SQLPLUS. I could not login to grid control. When installation, some agents installations are fail. what can i do? please help me out.
I install oracle 10g on RHEL 4. But error occure in cofiguration assistant.
following assistance not configured (which are recommended):
Oracle Net Configuration Assistant - fail
HTTP Server Configuration Assitant - skipped
Java Security Configuration Assistant - skipped
OC4J Configuration Assistant - skipped
Web Cache Configuration Assistant - skipped
Oracle Instance Configuration Assistant - skipped
Oracle Database Configuration Assistant - skipped
OC4J Instance Configuration Assistant - skipped
OPMN Configuration Assistant - skipped
Register DCM Plug-ins with EM - skipped
Application Server Control Configuration Assistant -skipped
DCM Repository Backup Assistant - skipped
Enterprize Manager Reposotory Creation Assistant - skipped
Log Details given about "Oracle Net Configuration Assistant" as
/usr/app/oracle_sw_owner/oracle/product/10..0/EM10g_1/oracle.swd.jre/bin/..
/lib/i686/native_thread/libzip.so : symbol errno version GLIBC_
Unable to initialize threads:cannot find class javalang thread not define in file libc.so.6 with link time referance (libzip.so)
could not create Java VM
configuration of assistant "Oracle Net Configuration Assistant" fail
When try to run sqlplus from xterm, it gives an following error :
$ /usr/app/oracle_sw_owner/oracle/product/10.1.0/EM10g_1/bin/sqlplus
Message file sp1<lang>.msb not found
Error 6 initializing SQL*Plus
After installation there is an information is given for Enterprise Manager Grid Control and it gives an url as http://localhost.localdomain:7777/em. But when i try to connect it gives an error massage as "The connection was refuse when attempting to contact localhost.localdomain:7777"
Same situation when i try to connect Enterprise Manager Application Server (its url: http://localhost.localdomain:1810). It gives an error massage "The connection was refuse when attempting to contact localhost.localdomain:1810"
What can i do in this situation? Please help me out. -
Install Oracle8.1.7 on Red Hat Linux 9
I tried to install Oracle8.1.7 on Red Hat Linux 9 and got error message:
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
My env variables:
THREAD_FLAG=native
LANG=en_US.UTF-8
CLASSPATH=/usr/local/jre/lib/rt.jar:/usr/jdk118/jdk118_v3/lib/classes.zip
DISPLAY=:0.0
Please help.I did export LD_ASSUME_KERNEL=2.4.1. Now the installation starts and I get
[oracle@localhost Disk1]$ ./runInstaller
Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/bin/jre. Please wait...
and then get back to the $prompt after some time and the welcome screen never comes up.
Whats wrong? -
Hello,
I'm having an error message while trying to install EPM 11.1.1.3 on Red Hat Linux 5.3 (32-bit).
It happens when I click "Next" for the installation to begin:
Error: Linux File Service Initialization Failed. Turn on the System property 'EnableLinuxPPKLogger' for more stack trace details
Error: Linux System Util Service Initialization Failed. Turn on the System property 'EnableLinuxPPKLogger' for more stack trace details
Exception in thread "Thread-7" java.lang.NullPointerException
at com.ibm.wizard.platform.linux.utils.UnixShellInterface.shutDown(Unknown Source)
at com.ibm.wizard.platform.linux.LinuxFileServiceImpl.cleanup(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.close(Unknown Source)
at com.installshield.wizard.service.ServiceFactory.shutdownService(Unknown Source)
at com.installshield.wizard.service.LocalWizardServices.shutdown(Unknown Source)
at com.installshield.wizard.service.LocalWizardServicesManager.shutdown(Unknown Source)
at com.installshield.wizard.service.LocalWizardServices.shutdown(Unknown Source)
at com.installshield.wizard.Wizard.shutdownServices(Wizard.java:648)
at com.installshield.wizard.Wizard.exit(Wizard.java:583)
at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1848)
Many thanks for your help.
Best regards,
AndyHi John,
I get the error messages once I click on "Next" from the "Confirmation" window.
I've extracted:
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:19 commonComponents
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:18 essbaseAddins
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:20 essbase_administration_services_webapp
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:19 essbase_integration_services
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:16 essbaseProductCommonComponents
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:21 essbase_services
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:17 essbase_smartsearch_webapp
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:17 essbase_studio_services
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:18 productCommonComponents
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:18 tools
For the Essbase installation.
Thanks for your help.
Best regards,
Andy -
Problem installing Oracle 8.0.5 on Red Hat Linux 7.0
Hi,
Due to a software requirement, I have to install Oracle 8.0.5 on Red Hat Linux 7.0. (I know Oracle 8.0.5 is pretty old and so as RH Linux 7.0 but that is what required).
I downloaded the Oracle8051EE_Intel.tgz from Oracle and tried to installed it but it didn't work.
It crashed out when it tried to run some of the SQL script during the installation using SVRMGRL. Later on, we found out all the binaries under $ORACLE_HOME/bin were corrupted during the installation. We did a comparison of the size of SVRMGRL and SQLPLUS and they are different from the Stage (or the one from the .tgz).
Does anyone have this problem before? Will 8.0.5 works on Linux 7.0?
Thanks in advanced for any help.
Best regards,
William
nullI'm having the same exact problem. The link you have provided
seems to be a bad link. I would really appreciate it alot if you
could help get us through this first step of starting the oracle
installer interface. I never thought it would be this hard to
get started. -
Installing Oracle 8.1.7 on Red Hat Linux Advanced Server 2.1
Hello,
how the subject says I'd like to install Oracle 8.1.7 on Red Hat Linux Advanced Server 2.1. Can anybody of you say me where to find a good HOWTO/Documentation?? It would be nice if you help me!
KonstantinThis install is not on a Pentium 4
I'm trying to install on pentium III
Memory 512Mo
Hard Disk 20 Go
Thanks again -
Installing 11i apps on windows xp and Red Hat linux AS 3.0
Hi,
I am a newbie to Oracle E-business suite............i will be very helpful if anybody could help me with the full procedure on how to install Oracle apps on windows on Windows XP and Red Hat linux AS 3.0.........starting with configuring ip.....i would really appreciate if somebody helps me out...........well thanks in advance..waiting for a optmistic reply...
Thanks again,
VirendraI have done installation on XP and 2000 servers are heres the steps... detailed ones. I also request those who install Oracle Apps 11i to first read the installtion pdf's which helps you understand clearly the prerequisites overall.
You cannot find the Pre installtion steps(such as Mks Toolkit and GNUMake config) in more clear terms from those documents.Which are explained here.
The Must PDF's to refer before installation
1)r1152ins.pdf
2)11iconcepts.pdf
According to the 11iconcepts PDF you can decide your business needs the N-Tier Architecture and Database Server and Application Tier Server File System in a very clear terms.
The installation process can be divided into
Pre Installtion,Installation and Post-Installation stages.
I would caution everyone to concentrate more on Pre Installation stage and which is more critical for a successfull installtion of Oracle Apps and to be free with later cropping up problems.
Further before moving into Installtion stages i have to Explain the Number of CD's and Installtion type's in Oracle App's.
In many places you may need to wait patiently even more than 10 minutes for screens(Dialog Boxes) to appear dont conclude prematurely some problem on system.
In oracle Apps 11.5.1 it consist of 12 CD's.
1) Start Here CD(RAPID Installation Wizard)
2)1-11 CD's
1-3 Application Top information
4th Oracle DB
5-6 IAS and other tools
7-11 Oracle Apps DB.
You have to decide whether you are going to do a Single Node Installation(No Post-Installation Task) or Multi Node Installation. Refer(r1152ins.pdf)
While installing for Multi Node you can see the Installation locations to be mentioned as
Appl_Top,Common_Top,Data_Top etc.Try to install Appl_top and common_Top in one drive and Data_Top in another Drive(Single Node) and in different nodes in Multi Node installation.
Installation Types
Production ==>Real time Env implementation's
Test ==>For test Env Purposes
Vision Demo==>R&D or learning Purposes.
Pre-Installation steps
======================
Space Requirement for types of installtions
Install VC++
How to Download and install MKS tool Kit
How to Download and Configure GNUMAKE
Env path setting
Create Applmgr user in Win2000
Space Requirement for types installtion:
Memory Requirement
1 GB of RAM(512 Fine for initial Installtion)
but planned for more user connections another 1 GB of Ram and according to the number of user's and Application needs you have to Increase the Memory.
HDD capacity
APP_Top(A)
COMMON_TOP(C)
DATA_TOP(D)
Test DB : 22 + 20 GB (60 GB recommended)
Prod DB : 22 + 20 GB (60 GB recommended)
Vision Demo DB: 22 + 35 GB (80 GB recommended).
Plus space for ur staging area.
This are the actuall space required for the Oracle Apps Alone plan for more space for future needs etc.
Softwares on System
Win2000 server with Patch1,Winzip and Acrobat Reader Latest version etc.
Install VC++:
Install a clean installtion of VC++ of Visual Studio Family 6.0
It should be first installed before installing MKS or GNUMAKE
NOTE: When Visual C++ is installed, let the installer register all environment variables. This will allow executables to be linked from the command line.
How to Download and install MKS tool Kit:
Note:Try to purchase the MKS tool kit from the below site.
or try to download the trial version valid for a months time.
http://www.mkssoftware.com/products/tk/ds_tkio.asp
Evaluation copy from
http://www.mkssoftware.com/eval/
Choose "MKS Toolkit for Interoperability " Download it in C:\
Again you have to click the downloaded kit to start the actual download of 38 MB of MKS tollkit Evaluation version.
You will be sent a Demo serial number to your mail id==>copy the same to a Notepad on your desktop.
Now start the installtion of the MKSToolkit on your system by clicking on the MKStoolkit downloaded.
It will prompt you for the Demo serial number which has to be provided.
The MKStoolkit will be successfully installed.
How to Download and Configure GNUMAKE:
1) HOW TO GET AND INSTALL GNUMAKE ON WINDOWS2000
This can be done by performing the following steps:
NOTE: Please, be aware that you must install Visual C++ BEFORE installing GNUMAKE, because its installation process involves linking executables.
1) Before downloading GNUMAKE, you will need to acquire some utilities which will be used for unpacking files. You can obtain the required utilities at the following
URL: ftp://ftp.gnu.org/gnu/windows/emacs/utilities/i386/
The directory contains the following files:
README
djtarnt.exe
gunzip-1.2.4-i386.exe
gzip-1.2.4-i386.exe
tar-1.11.2-i386.exe
tar-1.11.2a.exe
Only two of the files are required:
gunzip-1.2.4-i386.exe and tar-1.11.2a.exe
2) After downloading the above files, rename them as follows:
gunzip-1.2.4-i386.exe => gunzip.exe
tar-1.11.2a.exe => tar.exe
Place them into a directory that you can set in you PATH environment variable.
3) Point your browser to the following
URL: ftp://ftp.gnu.org/gnu/make
The files needed from this directory are:
make-3.77.tar.gz
make-3.78.1.tar.gz
make-3.79.1.tar.gz
make-3.79.tar.gz
Development requires to install version 3.77 or above. Downloading the latest version is perhaps best decision, but there are advantages to downloading the version required by development (3.77). (This document assumes that version 3.77 has been downloaded) (NOTE: AVOID USING SPACES IN
DIRECTORY AND FILE NAMES. GNUMAKE,VISUAL C++, ETC. DO NOT ALWAYS DEAL WELL WITH SPACES)
4) For instance, suppose you have downloaded file make-3.77.tar.gz on a directory called C:\GNUMAKE, unpack this file using gunzip.exe from a Command Prompt Window
Example: C:\GNUMAKE>gunzip make-3.77.tar.gz This last action, will expand file make-3.77.tar.gz and the extension .gz will be removed.
5) On the same Command Prompt Window, you should UnTAR the file, with the following
command: C:\GNUMAKE>tar -xvf make-3.77.tar This will create a new subdirectory called MAKE-3.77 under C:\GNUMAKE, the original directory.
6) In the new subdirectory, there is a batch file
called build_w32.bat; run the batch file to generate GNUMAKE.EXE
Try this from Command Prompt more than once if succesfully not built message appers till you get Generated successfully.
Note:If Possible run all the bat files in the MAKE-3.77 and also config.bat in the sub directory by double clicking it.
WARNING: There is a known issue with this last step, "GNU make fails to build regardless of chosing build_w32 or nmake"
See [NOTE:115937.1]
for work around. RELATED DOCUMENTS ----------------- For Microsoft Visual C++, MKS Toolkit and
GNUMAKE support, you should contact their respective vendors Microsoft Visual C++, MKS Toolkit
and GNUMAKE are registered trademarks.
http://support.microsoft.com/ http://msdn.microsoft.com/ http://www.mks.com/
http://www.gnu.org/ Note:104010.1: Release 11i on NT: Software Requirements
Note:115937.1: GNU Make won't make on windows NT
Important:All the downloaded files from GNU makes web sites shall be put in a single folder called gnumake under c:\ .Try to search for config.bat file inside this folders just click and
run it.
Env path setting:
Try to search make.exe generated in c:\program files\mkstoolkit\mksnt and copy and paste it
c:\gnumake\MAKE-3.77\windebug and c:\gnumake\MAKE-3.77\winRel also paste both this paths in the
My Computers==>Properties==>Advanced==>Environment variables==>Path setting's
After all this check as follows from CMD mode.
1)execute make at c:\>
2)execute gnumake at c:\>
In win2000 it may return error messages or Target wrong ignore it.If it is on Win NT then it will return proper status.
Create Applmgr user in Win2000:
Create a Applmgr user account in win2000 .
Installation:
=============
What here you require is the Patience .
Load the START HERE CD and run the C:\> cd \cdrom\rapidwiz
For Test and Prod it will ask for the location of Appl_Top,Common_Top and Data_Top location. Mention there path and ensure if more than one installtion say eg.Vision and Test or Prod to check the Path in all the tab pages its corresponding values and path's.
In Vision Demo many of the Options are not propmted from the user.
It will then do the system checking for Host Name and other details.All the checking should have been passed or if failed it will mark it in RED cross mark.Rectify the mistake and then onceagain proceed or else you will have problem after installation.
The Installation time takes around 5 to 6 Hrs of time.
For info on Post installation or on Multi Node follow the pdf's i have mentioned above.
The most tedious of all is succesfully crossing the Apps system checking it does for all
installed products it requires without any failure.
The GNUMAKE configuration or steps were nowhere given and it was all our trail and error exp.
This is possibly the most elaborate steps to install Apps on Win. post for further help. email me at [email protected] or [email protected]
Rajeev. -
Installing issues with Oracle Database 11g R1 on Red Hat Linux
Hi,
I am installing Oracle Database 11g on Red Hat Linux.
Version of the OS:Linux 2.6.9-5.ELsmp #1 SMP Wed Jan 5 19:30:39 EST 2005 i686 i686 i386 GNU/Linux
I have installed XManager on my PC to access the runtime installer in Graphical mode.
But once i click the installer file from Xmanager, it asks if the user wants to run it in terminal or simply run.
I selected the run in terminal and it starts the terminal where the initial pre-requisite checks are done i.e swap memory,temp and display.
The screen disappers and the graphical OUI never turns up...
Any pointer would be helpful.
Regards
PrabalTry the following:
1. logon to the linux using root and issue the following command - xhost+
2. Open xterm in the Xmanager and logon to the linux using oracle user.
3. in the installation directory issue ./runInstaller.
Oded
[www.dbsnaps.com]
[www.orbiumsoftware.com]
Maybe you are looking for
-
Windows sbs 2003 sp1, windows server 2008 R2
I have windows sbs2003 sp1 & windows 2008 R2 Licenses...I want to setup ERP application with SQL on windows 2008 R2, Terminal server windows 2008 R2 for RDP & Ncomputing & E-mail server for Internal and external use. I have IBM Server with XEON proc
-
Bulk changes to Common Resource Parameters
Hi, I need to make changes to many disks and file server resources at once in my cluster. The settings I need to change are in the common properties for resources: http://msdn.microsoft.com/en-us/library/aa372230(v=vs.85).aspx RestartPeriod RestartTh
-
How do i manage Calendar on 5 iOS devices
Hello All, looking for a little help here. The problem is managing the Apple Calendar across 5 different Apple iOS devices (one iPhone 5, one iPhone 4s, three iPad minis) From the iPhone5 i can set a Calendar event and invite anyone and the invite wi
-
Connecting HP Office Jet Pro 8615 to Samsung RV511 via wireless
Hi, I have just bought a HP Officejet Pro 8615 and gone through the procedures in connecting it to the wireless... I have the printer connected to my broadband routeer and the signal is strong with the wireless blue light solid on the printer as it s
-
Handling Consecutive NumberFormat Exceptions
I have written a Binary Search Program for which I am asking the user to enter the size and the elements of the array. If the user enters the size say 5 Now he can enter up to a max of 5 max numbers to populate the array. If the user enters an alphab