Help!! unable to set the session timing

Hello Friends...
while working with oracle9i Application server ..
when throught JSP i m setting the time for a session with the help of setMaxInactiveInterval(int);
of seesion object ..
it is not supporting this method may be due to some older version..
is there any other method to set thje session timing..
plz let me know asap..
thanks
mich

Hello,
Please avoid any personal information within these forums...they are public, and you have just posted your personal email address for all spammers to troll for and use. Not wise.
Rather, you need to contact your carrier. To use the proprietary RIM Push email capability, you must have an adequate data plan from your carrier. The carriers host BIS for their BB users. Typically, BIS is not available via generic data plans. Many carriers call what is necessary The Blackberry Data Plan. Whatever they call it, it is the carrier who delivers BIS to their BB users -- contact them for assistance. Once you have a BIS-capable data plan on your BB (at whatever fees your carrier will charge, btw), you will then have Personal Email added to the email setup wizard.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Unable to set the selected value for a ADF LOV

Hi,
I am developing an application using jdeveloper 10.1.3 and Struts.
I have created a ADF LOV on my JSP Page as given below:
<html:select property="lob" onchange="javascript:selectLOB(this.form)">
<html:optionsCollection label="prompt" value="index" property="lob.displayData"/>
</html:select>
When i submit the form, i am able to get the value of the selected Value in the List.
JUCtrlListBinding listBinding = (JUCtrlListBinding) formBean.get("Lob");
Row r = (Row) listBinding.getSelectedValue();
String SoLob = (String) r.getAttribute("LobLob");
But i am unable to set the selected value back in the list when i return to the form again.
I tried the following:
int x = listBinding.getSelectedIndex();
listBinding.setSelectedIndex(x);
It would be really helpful if some one could let me know what needs to be done.
Thanks,
Subashini

Gyan,
I tried with the code you suggest , its trying to set the value of a field, but my requirement is to change the property for
"Rendered" on the field so that based on search parameters we can hide result table column.
After searching online, I modified the controller code as follows
1.Created a new transient attribute (Testrender) with type "Boolean" and always updateable.
2.changed the "Rendered" property value on the field I want to hide as ${oa.PoSearchVO1.Testrender}.
3. Modified the controller code as follows :
        OAApplicationModule am = pageContext.getApplicationModule(webBean);
        OAViewObject testvo = (OAViewObject)am.findViewObject("PoSearchVO1");
        OADBTransaction txn = am.getOADBTransaction();
        if (testvo != null)
          OARow row = (OARow)testvo.first();
            if (a.equalsIgnoreCase("Approved"))
                 row.setAttribute("Testrender", Boolean.FALSE);
            else
                 row.setAttribute("Testrender", Boolean.TRUE);
        } But now when i run the page and populate the search field and click "Go" its hiding the field but throwing the following error and the search results are also bad.
Its using only the value of one search parameter but not the second one .
The search cannot be executed because the table has pending changes that would be lost. I think the vo is getting dirty when I update the transient attribute value. So I used txn.rollback ,then search is working fine but its not hiding the field.
So can you please let me know how to proceed from here ?

Quick install of RDS "unable to create the session collection"

Simple as new virtual server, not touched. Had this happen in the past as well. When I attempt to run the Quick Install of RDS I get "unable to create the session collection" on the Session Collection stage. Then when I go to add roles or features
the "session-based desktop deployment" option is greyed out.
Clearly this is broken, and has been for a long time.
Why in FUCK hasn't this been fixed?
Why in FUCK are Microsoft talking Windows 10 and new Server version when shit like this isn't fixed?

Hi Allister,
Thank you for posting in Windows Server Forum.
Sorry to hear about your hatred regarding the product. But the error which you are facing suggest that you can’t create the session collection, this generally happens when something went wrong during installation of RDSH role. You can try to remove the role
using server manager and then perform reboot of server. And after that again use server manager to add the role again.
Please follow the test lab guide to install from the scratch, you'd better not install the RDSH on the DC.
Test Lab Guide: Remote Desktop Services Publishing
http://technet.microsoft.com/en-us/library/hh831442
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Error deploying EJB on weblogic: Unable to set the transaction attribute

Hi,
I'm trying to deploy an application in WL10.3.2 and an error occurred during activation of changes.
Here is the error message from the log file:
<Jun 6, 2011 1:28:27 PM MDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'serverEAR-2' due to error weblogic.application.ModuleException: Exception preparing module: EJBModule(serverEJB-2.8.0.jar)
Unable to deploy EJB: C:\oracle\Middleware\user_projects\domains\base_domain\servers\Server_3\tmp\_WL_user\serverEAR-2\1zw7ao\serverEJB-2.8.0.jar from serverEJB-2.8.0.jar:
Unable to set the transaction attribute for method 'saveActionGroup(EditableActionGroup)' on EJB 'ViewBean'. No matching method could be found. Please verify the method signature specified in the ejb-jar.xml file matches that of your Remote interface for this EJB.
weblogic.application.ModuleException: Exception preparing module: EJBModule(serverEJB-2.8.0.jar)
Unable to deploy EJB: C:\oracle\Middleware\user_projects\domains\base_domain\servers\Server_3\tmp\_WL_user\serverEAR-2\1zw7ao\serverEJB-2.8.0.jar from serverEJB-2.8.0.jar:
Unable to set the transaction attribute for method 'saveActionGroup(EditableActionGroup)' on EJB 'ViewBean'. No matching method could be found. Please verify the method signature specified in the ejb-jar.xml file matches that of your Remote interface for this EJB.
     at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:454)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:391)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:59)
     Truncated. see log file for complete stacktrace
Caused By: weblogic.ejb.container.deployer.DeploymentDescriptorException: Unable to set the transaction attribute for method 'saveActionGroup(EditableActionGroup)' on EJB 'ViewBean'. No matching method could be found. Please verify the method signature specified in the ejb-jar.xml file matches that of your Remote interface for this EJB.
     at weblogic.ejb.container.deployer.MBeanDeploymentInfoImpl.processCTs(MBeanDeploymentInfoImpl.java:1502)
     at weblogic.ejb.container.deployer.MBeanDeploymentInfoImpl.processSpecificMethodCTs(MBeanDeploymentInfoImpl.java:1472)
     at weblogic.ejb.container.deployer.MBeanDeploymentInfoImpl.initializeTransactionAttribute(MBeanDeploymentInfoImpl.java:773)
     at weblogic.ejb.container.deployer.MBeanDeploymentInfoImpl.<init>(MBeanDeploymentInfoImpl.java:259)
     at weblogic.ejb.container.deployer.EJBDeployer.prepare(EJBDeployer.java:1190)
     Truncated. see log file for complete stacktrace
Please help me...Thanks.

In your ejb-jar.xml you are referring to a method saveActionGroup(EditableActionGroup) which is not defined in your remote interface.
Maybe you have made some typo in the configuration. Check your transaction section, i.e.,
<container-transaction>
            <method>
                <ejb-name>ViewBean</ejb-name>
                <method-name>saveActionGroup</method-name>
                <method-params>
                    <method-param>package.EditableActionGroup</method-param>
                </method-params>
            </method>
            <trans-attribute>Required</trans-attribute>
</container-transaction>or something similar. See if the defined methods are corresponding to the methods defined in the remote interface.

Unable to set the ip address for hosted network client after creating WIFI hotspot

Original Title: INTERNET CONNECTIVITY PROBLEM WITH MY LAPTOP WIFI HOTSPOT
HI all
I am able to use internet connection from my lap hotspot, when the internet source is Public or private wifi.
so I know the cmd window commands for hotspot and settings of client(sharing to hosted network client, assigning IP address etc.,)
but the problem I am facing is slight different
I am using my cdma wireless broadband datacard as my source internet connection(Reliance netconnect +)
when I try to create hotspot for this, as usual I am able to create the hotspot and able to share the internet to hostednework client.
but I am unable to set the ip address for hosted network client, if I try to set ip 192.169.137.1 and 255.255.255.0
as soon as I close the window, the ip address also disappears
when connect my android phone to that hotspot, it is able to connect but there is no internet connectivity.
when I check the hostednetwork client for packet transmission, both sent and received packet is happening., I mean transmitting
so what cause the failure in internet connectivity but success in hotspot connectivity?
check the screen shots...
can u help me..
its little complicated

Hi,
Please make sure the Ad hoc connection IP adress is at the same range with your local connection. In addition, how about recreate the ad hoc connection for test, please have a try.
If problem persists, please use Network troubleshooter in Action Center to fix this problem for test.
Roger Lu
TechNet Community Support

Setting the session when link is clicked in JSP

I have a jsp page which recieves a Map from a java class function. It retireves the element from the map and displays it onto the page as a link. Now what I want to do is whenever any link is clicked then I want to put the map in the session. How can I do that in the same page????
I do not want to already set the session becoz that gives me problem later on.

Ok, I understand what you are trying to do now. Unfortunately, I still don't think you have much choice. Essentially you will only ever have 4 ways of persisting the data:
1. In memory on the server (eg Session)
2. On disk on the server (eg database)
3. In memory on the client (eg Applet or maybe Javascript)
4. On disk on the client (eg signed applet writing to local file system)
The "standard" approach is to store all of this sort of stuff on the server, so you have a choice between 1 and 2.
I assume your "Employee" data is in a database or LDAP directory? (or some form of "on disk" persistence), and you are querying this data store to populate the objects in memory?
If so, there is a way you can avoid persisting in memory for a long time, but because you will have to persist "somewhere" you will only have option 2 left.. on disk.
In the code where you initially retrieve the data from the data store for the first JSP, you can put the Map in the HttpServletRequest object rather than the session (request.setAttribute()), then access this in the first JSP to render the list. When you get to the second JSP however, this object will be out of scope and you won't have access to it anymore so you will have to query the datastore again for the specific record (based on an ID passed from the first JSP). So when you hit "back", the first JSP should execute again and requery the entire list again.
This approach "shifts" the load from a memory load to a disk load (and you will also be affected by database performance issues), so you may not solve your performance desires.
Alternatively, if the list of Employees is the same for all users (ie, it is an entire list and not a "filtered" list based on some search criteria), then you could store the list in memory at "application scope". Basically you would just load the Map on application start-up and put it into a static variable somewhere. I suspect this won't meet your needs as typically the list you generate would be based on a specific query (I am guessing here).
All that being said, your concerns about memory usage and performance may be unwarranted. If you do some quick calculations about the memory usage of each Employee object, you may find it is a trivial amount. (Of course you won't be able to tell definatively how much memory it is using, but you may be able to hazard an educated guess). Remember also that things like Strings are "immutable" (never change) and are drawn from a "pool" of Strings. So, if you have two objects which contain the String "Java", they will actually both be using the same bit of memory.
Also, a word of warning: If you choose to maintain your "in memory" model, you may run into concurrency issues. Consider the situation where the initial query generates a list of Employees. The user traverses the list looking at the details of each employee. Meanwhile, another user is changing the details of an Employee on disk, but the first user hasn't looked at the details of this Employee from their list yet. Because the list the first user is viewing is in memory, it won't reflect any alterations made since it was generated. So when the first user views the details of the Employee that the second user altered on disk, they will see the "old" details for that Employee.
So, in summary the only two choices I can think of that are reasonable are:
1. Keep things the same but don't destroy the Map in the session so the first page always has it, and suffer the memory issues. (remembering the warning above)
2. Limit the scope of the data to the "request" only, and re-query every time. This will have poorer performance from a "response-time" perspective but avoids concurrency issues.
My recommendation:
If the list is "small" (sub 100 items), and you don't care about the risk of viewing "old" data, keep it in the Session. If the list is too big, perhaps you could look at only storing the first X number or records in the session and only displaying the first X number of records in the first JSP (like a search engine does)
If the list is big, and/or you DO care about viewing old data, maintain the persistence on disk. If you choose this option, performance can be enhanced by using connection pools, stored procedures etc.
At the end of the day, memory will only cause a performance issue if you "run out". Maybe the solution is to simply add more memory to the server?
Hope some of this helps.

Error adding RDSH to existing collections: Unable to retrieve the session collection properties

I've randomly experienced a problem on our production server. I can no longer add RDSH servers to existing collections but I can create a new collection. The error message from add-rdsessionhost:
Unable to retrieve the session collection properties.
+ CategoryInfo : InvalidResult: (:) [], RDManagementException
+ FullyQualifiedErrorId : JobStateFailed
+ PSComputerName : localhost
I can amend the rds.RoleRdsh table to add the server to the collection but more gtables need to be edited manually to get it working. There appears to be some kind of permissions issue editing exisitng collections but not new ones? I'm not aware of anything
that has changed since I last amended a collection, the day before.
Any help would be appreciated. I can provide more information if necessary.

Hi,
Based on my research, there was a similar case where an empty collection existed in Connection Broker SQL database, deleting the empty collection resolved the issue.
Please run PowerShell cmdlet Get-RDSessionCollection
to list all collections in the RDS deployment.
Get-RDSessionCollection
https://technet.microsoft.com/en-us/library/jj215456.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100

Hi!
We have fatal or critical error message on Microsoft Intune Portal but all agents are working just fine. Before opening support ticket we would like to hear comments from the experts on this forum. We would also like to fix this error before starting to
manage mobile devices with Intune.
Error message on Intune Portal:
"Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100"
Repeated: 19 times.
Class: (System) Policy
Random Fatal error message on C:\Program Files\Microsoft\OnlineManagement\Logs\PolicyAgent.log found from one Windows 8.1 client:
2015-02-21 08:49:20:704 2852 1ab0 FATAL: DocumentProvider::IndicateToConsumer/pp->ProcessPolicies(NULL, NULL, NULL, NULL) failed with error 0x800704d5.
That said, we are not facing any specific problem but we would like to find symptom of this repeating error message on Intune Portal . We would appreciate to get any thoughts about this case.
Br.
Jukka

Hi Jukka,
Mobile policy doesn't apply to clients using the Full Client download. Please open a support case so the team can assist in further troubleshooting.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." Any thoughts, Thank you.

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." I am using an Imac , Lion operating system, and Windows 7. It worked a few days ago. Any thoughts, Thank you.

Note that nowhere in the Boot Camp instructions does it tell you to use Disk Utility to format the Windows partition. The Boot Camp Assistant program creates the partition & sets the +partition scheme info+ of the disk as appropriate for the Windows installer but the Windows installer itself is responsible for formatting the new partition with the appropriate +file system scheme+ (NTFS for Windows 7).
If you follow the instructions in the Boot Camp Installation & Setup Guide to the letter you should have no problems installing Windows.

Trouble setting the session state of a select item.

Hi,
I have a requirement whereby I need to change the session state of a select list item in my form without the need to submit. I am using Application Express 4.1.0.00.32. I thought this would be straight forward using a dynamic action or javascript and calling an on demand process for example.
P1_MY_SELECT onchange="set_option();"
function set_option() {
var l_option=$f_SelectValue('P1_MY_SELECT');
alert( 'My new value is ' + l_option );
// ON DEMAND Set the new session state value
var lRequest = new apex.ajax.ondemand
('SET_P1_MY_SELECT',function()
{ /* start the return function */
var l_s = p.readyState;
if(l_s == 1||l_s == 2||l_s == 3)
else if(l_s == 4)
{ gReturn = p.responseText;
(gReturn)?json_SetItems(gReturn):null;
else{return false;}
/* end the return function */
lRequest.ajax.addParam('x01', l_option );
lRequest._get()
My on demand application process
DECLARE
l_options varchar2(2000) := wwv_flow.g_x01;
BEGIN
APEX_UTIL.SET_SESSION_STATE('P1_MY_SELECT',l_options);
apex_util.json_from_items('P1_MY_SELECT');
END;
Is there a better method to set the session state of my P1_MY_SELECT other than what I am doing as above or can you tell me why the session state of P1_MY_SELECT is not changed?
Thanks.
Edited by: 968358 on 01-Nov-2012 08:40

if you are on 4.1 why don't you use a dynamic action instead of writing the code again?
create a dynamic action like this
Event: Change
Source Type: Item
Item: P1_MY_SELECT
True Action:
=========
Action: Execute Plsql Code
Plsql Code: null;
Page Items to Submit: P1_MY_SELECT
Page Items to Return: P1_MY_SELECT (this is optional)
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21674/advnc_dynamic_actions.htm#HTMDB27020

Unable to set the colorIndex Property of the Interior Class

HI
Iam trying to Update the Accound Dim with New Property 'CostAcc" IN SAP BPC.
i entered the text and lenth of the property then i clicked on Modify The Dim Property. then its giving a warning message"Unable to set the colorIndex Property of the Interior Class"
BPC Experts pls send me a sollution
Thanks in advance
Regards
NarsiP
SAP BPC Consultant
OutLookSoft SA

Did you process your account dimension before to add you property?
Are you sure that your account dimension was working before to apply your modification?
Did you add just one property ore more properties?
Did you delete any existing properties?
Did you try to do modify account dimension without adding any porperties to see if that dimension is fine?
Regards
Sorin Radulescu

Error Deployer BEA-149231 Unable to set the activation state to true

Hi Friends ,
We are using weblogic 10.3.5.0, one of the deployment module is in failed status.
In the application logs we could see the following error
ERROR Util: Initial Spring Application Context creation failed: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'datasource' defined in class path resource [spring.xml]: Invocation of init method failed; nested exception is javax.naming.NoPermissionException: User <anonymous> does not have permission on comp.env.cpt to perform lookup operation
in the weblogic server logs we could find the follow error
<24-Jan-2013 08:47:43 o'clock CET> <Warning> <HTTP> <BEA-101162> <User defined listener org.apache.myfaces.webapp.StartupServletContextListener failed: java.lang.ExceptionInInitializerError.java.lang.ExceptionInInitializerError
at com.db.cpt.biz.Utilities.Util.<clinit>(Util.java:114)
at com.db.cpt.web.listener.MyPhaseListener.<clinit>(MyPhaseListener.java:26)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
Truncated. see log file for complete stacktrace
Caused By: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'datasource' defined in class path resource [spring.xml]: Invocati
on of init method failed; nested exception is javax.naming.NoPermissionException: User <anonymous> does not have permission on comp.env.cpt to perform lookup operation.
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1170)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:427)
at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:249)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:155)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:246)
Truncated. see log file for complete stacktrace
Caused By: javax.naming.NoPermissionException: User <anonymous> does not have permission on comp.env.xxx to perform lookup operation.
at weblogic.jndi.internal.ServerNamingNode.checkPermission(ServerNamingNode.java:443)
at weblogic.jndi.internal.ServerNamingNode.checkLookup(ServerNamingNode.java:423)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:180)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
Truncated. see log file for complete stacktrace
>
<24-Jan-2013 08:47:43 o'clock CET> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'xxx'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: javax.naming.NoPermissionException: User <anonymous> does not have permission on comp.env.cpt to perform lookup operation.
at weblogic.jndi.internal.ServerNamingNode.checkPermission(ServerNamingNode.java:443)
at weblogic.jndi.internal.ServerNamingNode.checkLookup(ServerNamingNode.java:423)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:180)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
Truncated. see log file for complete stacktrace
Can you please advise us how can we resolve this issue which with i am struggling
Raja

Kumar,
thanks for the update.
we fixed the issue,
for a particular user we didnt add his membership in a group in security realm, we added the user to a particular group, and then restarted weblogic, and deployed the module, and then status of deployment becomes successful.
Raja

How to set the session using onClick event?

Dear All,
I have a link, which once the user click on it, I want to set the session.
<a href="link.jsp" > Link </a>How to set the session? Where should I put <%session1.setAttribute ("test", "1234"); %>?
Any idea?
Thanks

when u click on Link
the control goes to link.jsp/.
and in this page u can write the session related code.

Can someone tell me why this is not setting the session variable?

first page
<?php
// script1.php
session_start();
echo "<form action=\"script2.php\" method=\"post\"
name=\"name1\">";
echo "Your name: <input name=\"name\" type=\"text\"
size=\"20\" value=\"\"> ";
echo "<input name=\"submit\" type=\"submit\"
value=\"Submit\">";
echo "</form>";
?>
second page
<?php
// script2.php
session_start();
echo('Hello, ' . $_SESSION['name1']);
?>

jlw12689 wrote:
> second page
>
> <?php
> // script2.php
> session_start();
> echo('Hello, ' . $_SESSION['name1']);
> ?>
You need to set the session variable first.
<?php
session_start();
if (isset($_POST['name1'])) $_SESSION['name1'] =
$_POST['name1'];
echo 'Hello, ' . $_SESSION['name1'];
?>
By the way, using echo to create your form on page one is a
complete
waste of time. Just use an ordinary HTML form - a lot less
typing, and a
lot more efficient.
David Powers
Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
http://foundationphp.com/

Unable to set the default sending account in Mail?

I have three IMAP accounts set up in Mail and when I want to send an outgoing email can easily use the drop down to pick which account is used. The issue is I'd like to specify which of the three is used by default. I've searched on how to do this and the supposed answers are not working for me.
First, in Mail preferences, it's been posted you can drag the order of the accounts. That does not work for me at all, they are not draggable.
Second, in System Preferences there's been some talk of setting defaults in the Mail, Contacts & Calendars panel. When I try to access one of the accounts there it asks me for the password, I enter the correct one, and it fails saying unable to verify the password.
Can this be done at all? Is there a bug in System Preferences?
Thanks in advance!

Spinland,
Try this and see if it helps you....
this was posted by victoryhat in another discussion on Lion. This is what I have done and it worked for me.
http:/https://discussions.apple.com/message/18677085#18677085

Help!! unable to set the session timing

Similar Messages

Maybe you are looking for