HELP!!! Unable to upgrade E50 Firmware!

Hi,
please help me! I cannot update my E50 firmware, eventhough I have the old version 06.27.1.0. NSU connect properly to my phone,without any problem and detect ir correctly.The first time it did, it started to download a 62mB file. But after the download, it gave the message that there is no upgrade available for my phone!! And it continues to give me the same message each time.
What should I do? Do I have a setting problem?

Uninstall NSU, and PCSuite, clean registry and reboot PC. Install only NSU and try again. That procedure, sometimes works others don´t. After the upgrade, install again PCSuite.

Similar Messages

HELP UNABLE TO UPGRADE FIRMWARE!!!!

Hi,
I have a Linksys WRT300N V1. I am unable to upgrade the firmware on it. It fails at about 10%. I really don't know why. Any help would be great. Thank you very much.
-=Bobby=-

Same issue, I have the linksys 300N V1.
Downloaded the latest firmware for V1.1 - WRT300N-v1.1_1.51.2_fw,0.bin (file name 3.6 MB)
And trying to upgrade results in a failure at 6 to 10% everytime? Is this because the V1.1 router is not the same as V1 and requires a different firmware?
Tech support has no idea, OMG!

Unable to upgrade EFI Firmware on MacBook Pro

I am unable to upgrade the firmware on my 15" MacBook Pro for some reason ... my current version is MBP11.0055.B03. I have downloaded the new firmware and followed the instructions ... yet, when I run the MacBook Pro EFI Firmware Update utility and click Shut Down to install it and start the process, it pops up with the error "An unexpected error occurred (0). Your firmware cannot be updated." .... I've never had this kind of trouble updating firmware before.....
I have trashed the utility and downloaded it again, but I get the same results ... I have also repaired the disk permissions ... still no change. Any ideas??
MacBook Pro 2.16GHz/2GB RAM/100GB 7200rpm HD Mac OS X (10.4.8)

I have the same issue. Console log shows the following:
Mac OS X Version 10.4.8 (Build 8L2127)
2006-11-14 12:39:53 -0800
2006-11-14 12:39:54.311 SystemUIServer[218] lang is:en
2006-11-14 12:40:07.655 MacBook Pro EFI Firmware Update[229] MacBook Pro EFI Firmware Update version 1.2
2006-11-14 12:40:07.658 MacBook Pro EFI Firmware Update[229] No AppleEFINVRAM
2006-11-14 12:40:13.261 MacBook Pro EFI Firmware Update[229] GetRootAccess success
Nov 14 12:40:13 CB-MBP authexec: executing /usr/sbin/bless
preallocation of ///System/Library/CoreServices/com.apple.bless.firmware//LOCKEDMBP11_005508B.fd failed
Could not create ///System/Library/CoreServices/com.apple.bless.firmware//LOCKEDMBP11_005508B.fd
Error while writing firmware updater for EFI
2006-11-14 12:40:13.632 MacBook Pro EFI Firmware Update[229] pid 0xea, status 0x300
2006-11-14 12:40:13.632 MacBook Pro EFI Firmware Update[229] NORMAL EXIT 0x3
2006-11-14 12:40:13.632 MacBook Pro EFI Firmware Update[229] An error 0x3 was returned from /usr/sbin/bless.
2006-11-14 12:40:13.632 MacBook Pro EFI Firmware Update[229] bResult 0x0 Status 0x3 returned from CallAEWP bless
2006-11-14 12:40:13.632 MacBook Pro EFI Firmware Update[229] EFIUpdaterController::showError:3
2006-11-14 12:40:13.632 MacBook Pro EFI Firmware Update[229] CommonUpdaterController::showError:3
2006-11-14 12:40:14.829 MacBook Pro EFI Firmware Update[229] EFIUpdaterController::showError:21
2006-11-14 12:40:14.829 MacBook Pro EFI Firmware Update[229] CommonUpdaterController::showError:21
2006-11-14 12:40:14.829 MacBook Pro EFI Firmware Update[229] EFIUpdaterController::showError:1
2006-11-14 12:40:14.829 MacBook Pro EFI Firmware Update[229] CommonUpdaterController::showError:1
A file /System/Library/CoreServices/com.apple.bless.firmware/LOCKEDMBP11_0055_08B.fdLOCKED_MBP11_005508B.fd exists but is size 0.
Disk and permissions verified OK. Also failed to install when logged in as root. Any help appreciated.

How to upgrade e50 firmware via apple mac?

I own an E50 (RM-170) which is currently running v 06.41.3.0.
How do I tell what the most up-to-date firmware is?
And how do I upgrade the firmware into the phone using an Apple Mac? (I saw the updater software for Windows but couldn't see a Mac version).
Thanks
Peter Crow, New Zealand

Check on the Nokia software update site for your specific model. Be aware that they release firmware for different regions at different times.
As for upgrading via a Mac, that isn't available as yet.
Don't bother trying through Parallels. I have and it doesn't work.
Sanjay Mehta
Motorola "Brickphone" circa 1996, Alcatel One Touch, Ericsson R380, Sony Ericsson T220, Sony Ericsson T630, Nokia E50, Nokia E61i, Nokia 9300i, Nokia E71,Nokia X6, Google Nexus S, iPhone 4S

NETGEAR SPH200D: Unable to Upgrade de Firmware to ...

Hi friends !
Please, I'm having problems to Upgrade the firmware of my SPH200D.
The current firmware version is 1.0.4.30, and I'm trying to upgrade it to 1.0.4.80.
I have already downloaded the file to Upgrade, but after insert the file in the WebPage, upgrade the phone, reboot the system, take the battery out... the Firmware Version is still showing 1.0.4.30 !!!
I have tried several times, but no sucessfull !
PLEASE, does anyone know what's going on?

Hi Stash.
The OS of my computer is Windows Vista Enterprise (Service Pack 2), using Internet Explorer browser.
To avoid errors in the file, I have loaded the firmware file from more than one site... and I tried with all of them.
PLEASE, Would be possible you send me the file that you have used ? (my email: [email protected])
Thanks in advance !
My Best Regards,
Evandroce

Help After I upgraded my firmware I now have a Power Outlet that wont go

Hello, I am in need of help, I upgraded my Ipod Mini, after the update it told me to plug the ipod into a wall outlet so that it may safely flash the bios, I plugged the usb cable into the wall adapter then plugged it in, nothing happened. I left it plugged in all night and it would reset in 3 minute intervals never flashing my bios because I still have the Icon with the power adapter on the screen of my ipod. I have opened the diagnostics to look around and to charge my Ipod also but I have found nothing that seems to work, any help on this topic will be greatly appreciated, thanks a lot, I have searched this topic but havent found the correct answer to suit me. Thanks all.

Mitch - Thanks so much for the reply , I drained the battery so much that nothing would come on at all, then I hooked it up to my wall charger. Right now I have the dead battery Icon which is somewhat of a relief to me because I am tired of seeing the wall charger Icon. If this doesnt work my next step will probably try to find someone that has a computer where I can plug my firewire plug in, who knows it may work, I will try anything including taking it apart.

E60 Unable to upgrade firmware (Product Code:05190...

Hello all,
I have just gotten an E60, but currently unable to upgrade the firmware. The NSU says that the phone is not supported.
Pressing the buttons (*#0000#) shows the following:
05w34.2
20-09-05
RM-49
And the product code of the phone is 0519047.
Please help as the phone is very very sluggish and crashes easily.
Thanks!

My problem MIGHT be solved !!! The file "FW_E2000_1.0.03.002_US_20100907_code.bin" i previous downloaded from the linksys download page "http://homesupport.cisco.com/en-us/wireless/linksys/E2000" was 0 bit.This may course the "Upgrade failure" problem !! But i got 5.16 M when downloading direct from the link "http://homedownloads.cisco.com/downloads/firmware/1224655367476/FW_E2000_1.0.03.002_US_20100907_code..." which was copied from the same page. I will give it a try later. Have a nice day !! SLo

HT4972 Hi I m unable to upgrade ios5.1.1.. Please help when I click on install now and agree to t&c.. It say verifying updates and then it says unable to upgrade.. Please help

Hi I m unable to upgrade ios5.1.1.. Please help when I click on install now and agree to t&c.. It say verifying updates and then it says unable to upgrade.. Please help

Read Here > https://discussions.apple.com/message/18449560#18449560

Unable to upgrade firmware on LaserJet Pro MFP M127fw - HP Device Update cannot proceed

I just bought a new LaserJet Pro MFP M127fw and was trying to upgrade the firmware to the latest one posted on the support website of HP and the error I keep gettin is HP Device Update cannot proceed. Below is a screenshot
Everything is plugged in and I don't have any errors on the printer. Please help.

Hi @EddieTr ,
I see you're experiencing issues updating the printer's firmware. I would like to help you resolve this issue.
Power cycle the printer.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Print a Configuration Report to see which firmware version you have now. The latest Version is 20140129.
Printing a Configuration Report.
Connect the USB cable from the printer directly to the computer and run the firmware update again, if your version is older. (don't use a USB hub or Dock)
Be sure to select the newly created print queue for the USB connection while using the tool.
Please call our technical support at 800-474-6836 if the issue persists. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

WRT160N Severe Problem, Cant upgrade (downgrade) firmware PLEASE HELP!!!

Had this router running for acouple weeks. Its had that **bleep** connection problem but just today it got even worse. About every 30 seconds it will lose connection to the modem and internet for about 2 seconds. So even if i try to upgrade my firmware down to 008 i dont get the chance. The upgrade gets about 50% done and then i lose internet and it fails. **bleep**?! please please please help
Solved!
Go to Solution.

If you have downloaded the firmware already then disconnect your modem from the router, and just connect a computer straight to the router on any one of the LAN Port's...
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

HT4972 No matter which of your confusing directions I try to follow, I am unable to upgrade my iTunes to the latest version which "must be done" prior to upgrading my iPad 2 to IOS 5. PLEASE HELP!!

Please help me to upgrade latest iTunes version so then I can upgrade to iOS 5 or 6. I have an iPad 2. Thank you.

You need to update iTunes on your computer (not the iPad) to the latest version in order to then update the iPad to iOS 5.1.1 (iOS 6 isn't released until the Autumn) - you can check if you are up-to-date (which will prompt you to update if you aren't) via, on a PC, 'Help > Check For Updates', and on a Mac 'iTunes > Check For Updates'
When you have that installed, connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases (you may also want to copy photos off the iPad as well) and then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'. You may also want to copy off the iPad any important documents, notes, files etc e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case.
You can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button.
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

Dell PowerVault MD3600f - Unable to upgrade firmware - Data validation error

Upgrade Controller Firmware wizard reports the following error.
1 problem detected.
Data validation error: The storage array cannot be upgraded as host port type representation in Controller A did not match with those of Controller B. Contact a technical support representative to resolve this issue.
What does this mean? and how to fix it.

Hi,
yes 100% the error is reported from the dell mdsm software.
steps.
1. open mdsm application
2. right click on powervault md3600f
3. select upgrade raid controller module firmware
4. upgrade raid controller module screen apears and refreshes unit(s) status changes to no upgradeable.
5. error apears in the details window.
6. press view log.
[May 17, 2013 9:25:15 AM] [MD3600] [pre-upgrade tests] [pre-upgrade tests start]
Pre-upgrade tests started
[May 17, 2013 9:25:37 AM] [MD3600] [pre-upgrade tests] [check RAID controller module state]
Test passed - RAID controller module 1
[May 17, 2013 9:25:37 AM] [MD3600] [pre-upgrade tests] [check RAID controller module state]
Test passed - RAID controller module 0
[May 17, 2013 9:25:38 AM] [MD3600] [pre-upgrade tests] [check spm database]
Test passed - RAID controller module 1
[May 17, 2013 9:25:39 AM] [MD3600] [pre-upgrade tests] [check spm database]
Test passed - RAID controller module 0
[May 17, 2013 9:25:39 AM] [MD3600] [pre-upgrade tests] [Physical Disks Unavailable]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check configuration database]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check physical disks]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check disk groups and disk pools]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check hot spares]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check current operations]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check virtual disks]
Test passed
[May 17, 2013 9:25:43 AM] [MD3600] [pre-upgrade tests] [check internal data validity]
Data validation error: The storage array cannot be upgraded as host port type representation in Controller A did not match with those of Controller B. Contact a technical support representative to resolve this issue.
[May 17, 2013 9:25:44 AM] [MD3600] [pre-upgrade tests] [check event log]
The event log was cleared within the last 24 hours (event type: 100).
[May 17, 2013 9:25:45 AM] [MD3600] [pre-upgrade tests] [check event log]
Test passed
[May 17, 2013 9:25:45 AM] [MD3600] [pre-upgrade tests] [pre-upgrade tests complete] [0h 0m 30s]
Pre-upgrade test(s) failure - the storage array cannot be upgraded in its present state

HT4972 I am unable to upgrade my Iphone 4 3G about 2 years old to IOS 5.0? Please help

I am unable to upgrade my Iphone 4 3G software to IOS 5.0. My phone is 2 years old.

That's correct. You are unable to upgrade an iPhone 3G to iOS 5. You are unable to upgrade the iOS past 4.2.1.
This is normal.
Edit: Wait, do you have an iPhone 4 or an iPhone 3G? Your post is a little confusing.

Too many errors after upgrading the firmware to 1.0.3.10 on Cisco RV180W wireless router

My company purchased one Cisco RV180W wireless router few days ago and it worked normal with default firmware version of 1.0.0.30. Today I upgraded the firmware to version 1.0.3.10, the users can still access this router via wired and wireless devices, but on the dashboard I observed two major problems, one is the CPU utilization always shows 100%, another is the more and more errors appearing, on the Syslog Summary panel "Error" log has been up to 625 and is still increasing, there is one message repeatedly displaying in the log, see in below:
Wed Nov 13 13:55:25 2013(GMT+0800) [rv180w][System][PLATFORM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 18 dot11STA 100 failed. status=-1
Who can tell me what does this error message mean and how to elinate this error message ? also how to deal with 100% CPU utilization ?
Thanks.

Hello,
i have been looking at different VPN routers over the last few weeks and i was very close to buying the RV180W, but then i stumbled across many posts reffering to firmware issues, one issue is that the cpu sits at 100% useage, i just wondered if this is a bug in GUI or is the CPU actually max'd out? has anyone had any resolution into this?
also the firmware on the emulator is a newer version than is listed on the support page, does anyone know when 1.0.3.14 will be released for download?
when i buy a new product i like to ensure that the system is fully upto date before its put into use but i obviously dont want to add any performance issues from the ofset due to the CPU useage.
i also have a could of questions if anyone can help
the Ipsec VPN, will this work with the Built-in VPN client for apple devices? (New IOS7), i am unable to find a quickvpn application for apple IOS.
is the site-to-site IPSec VPN also compatible with the Cisco Wvrs4400n router?
thanks in advance.

E50 Firmware 06.41.3.0 Bluetooth Issues

Following an upgrade to the new firmware, everytime I'm in the car with the phone connected to a THB Bury Bluetooth car kit and a message arrives either SMS or email the phone mutes the radio then reboots!!!!
It never did this on the previous firmware.
Any help appreciated.

Hi..am having exactly the same issue of bluetooth headset volue being too low on my e50. It works perfectly well with my blackberry h/s or another nokia e50. pls suggest a solution. thanks.
PS I upgraded the firmware to V 07.36.0.0 // 07-09-2007 // RM-170 // Nokia E50.

HELP!!! Unable to upgrade E50 Firmware!

Similar Messages

Maybe you are looking for