Help Unable to use software upgrade

I am unable to use software upgrade, til yesterday it was running fine, today i am not getting the updates, the page is completly blank, but still says , your computer has softwares to be upgraded.why has this problem occured.I know i can download everything individually, but i need my mbp to do it automatically, as my net is slow.

3rd party pluggs or Logic instruments? Did you change hardware or installed/updated your software? I have a similar problem after an update where logic can't open 3rd party pluggs... But then I can open them on new projects... Strange!.....

Similar Messages

Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

After the restore did the phone work properly for a while? Say, a day or so?
If so it is possible you have an app that doesn't let go of memory properly. I reboot my iPhone ( hold sleep/wake and hole till you see the apple logo) every few days. This resets the memory. The iPhone OS has doesn't seem to mange memory very well yet. So a reboot will help with that. I have had my phone almost slow to a stop before I started rebooting. Always reboot after installing a new app. Also do you close all pages in Safari when you are done? This is a good practice. Safari will run in the background and use processor time and drain your battery quicker. Create a new blank page then close all others when you are done browsing for a while. I have also found that certain web site that have animated images like weather maps will turn the phone into molasses. As soon as i close that page it gets faster.
If all of the above have no effect then as Tamara said it is time for a trip to the Genius bar.
Good luck

Help needed: iPhone 4 software upgrade failed many times

Hello. I've bought an iPhone 4, which its operating system is 4.3, and was prompt by iTunes about this iPhone 4 software upgrade to iOS 4.3.5. I've downloaded the software and waiting for quite some time and after the dowloading has completed, the file will be processed. After processing, there is a popup saying that somehow the software upgrade failed and said something like make sure that your connection is correct etc. Do you have any idea on how to solve this issue?
Help me, please. Thank you very much.

This is asked and answered many times each day. The forum search bar is on the right side of this page.
Diasble your firewall/security software and try again.

Unable to use software instruments in LP9...please help??

I am having trouble opening software instruments in lp9. They worked fine about a week ago. Now, all of a sudden, they don't. I can play my keyboard and record it fine, but if I insert a software instrument, it the signal doesn't register in lp9. Also, shouldn't there be an input select for my software instrument?...because there isn't. I am using leopard and I have a presonus firestudio interface.
Thanks in advance!

3rd party pluggs or Logic instruments? Did you change hardware or installed/updated your software? I have a similar problem after an update where logic can't open 3rd party pluggs... But then I can open them on new projects... Strange!.....

Help: Can you use software trigger on a digital line.

Hi:
We have a legacy DAQCARDard 700 which does not support hardware triggering.
We have a trigger from our instrument that is 5 V+ and we would like to
trigger when it drops to 0 V. We have several questions.
1. Do we need to invert the signal in MAX or is that only for V that are
negative?
2. Is there a good example in the examples where the state of this digital
line is used to trigger an analog acquisition? When we tried using the
digital trigger examples, we had an error saying that the hardware did not
support that mode.
3. We have an analog software trigger mode (based on the Analog Software
Trigger example) working which we would like to modify over to read the
digital line, but we have done very little wi
th digital I/O.
4. The digital trigger has been assigned a virtual channel of dtrg.
Any help would be much appreciated.
Thanks in advance,
Pete

Thanks Doug,
If we read the digital line instead of as an analog line would it improve
the accuracy of the triggering. Everything works now except we have a
little bit of timing jitter within about 1 data point scanning at 50 kHz.
However, I've never done any digital i/o with LabView, but may I should work
through some of the tutorials. If you thought that this might solve the
jitter problem. Would checking the state of the digital line allow a faster
response with softtrig, I guess is my question?
Pete
"Doug Norman" wrote in message
news:[email protected]..
> Hello Pete,
>
> You are correct that the DAQCard-700 has no digital (or analog)
> hardware trigger. The analog trigger example t
hat is working for you
> is using conditional retrieval. This is where data is always being
> acquired and the driver looks at the values to determine when to
> "trigger" and read the data into LabVIEW. To answer your questions:
> 1. I don't think you need to invert the signal. This is for when you
> want a digital low (below 0.8 volts) to show up as a digital high, and
> a high (above 2.0 volts) to be read as a low.
> 2. I don't know of a good example. You would basically have to
> monitor the digital line. When it goes from high to low you would
> then start your analog acquisition.
> 3. I think this could be your best bet. If you have enough analog
> input lines, why not just connect this digital signal as one of your
> analog inputs. Then use this example to trigger when the 5 volts
> drops to 0. It won't hurt to acquire your digital signal on an anlog
> input along with your other data.
> 4. I don't understand this question.
>
> Best Regards,
>
> Doug Norman

Help required with WLC software upgrade

I have a customer with WLC 4402 in use, running software version 7.0.98.0, and supporting 11 APs at present. The customer wants to enlarge the WLAN, which involves increasing the number of APs. I have purchased a new WLC5508, and have installed it onto the network alongside the 4402. the 5508 is running software version 7.0.116.0. Because the wireless network is critical to the user, we want to move the APs over to the new controller while the network is up and running, then remove the 4402.
However, when we set the 5508 as the master controller, or tell one of the APs to use the 5508 as its primary controller, the AP connects to the new controller, downloads the new software version, attempts to load it but reports an error with the unzipped file size of the software and fails to boot. formatting the flash on the AP, then disconnecting the 5508 from the network and rebooting the AP allows it to connect to the 4402, it downloads the older software and boots as normal. A new AP, if connected to the 5508 in a test scenario (ie no 4402) connects, downloads and boots perfectly.
I have the upgrade software to allow the 4402 to be upgraded to 7.0.116.0, but I am concerned that, if this is installed, the existing APs will then fail to boot from the 4402 or the 5508.
all APs are 3502s, running IOS version 12.04(23c)JA when connected to the 4402 and 12.04(23c)JA2 on the 5508.
Any suggestions would be gratefully received
Thanks

Hi Pat,
thanks for the reply. I am off site until the morning, but will attach the colsole output tomorrow.
Your mentioning a corrupt image makes me wonder - we had a lot of trouble setting up the initial config on the new WLC, getting a lot of launch failures. Eventually things seemed to settle down (it certainly booted successfully first time this morning) and getting an AP to connect without a problem made me hope it was just a quirk of the configuration wizard, but I think I will try a reboot of the WLC before I do anything else, just to check it is stable.
If it is a corrupt image it may take a little while to sort, as we have not as yet got a support contract on the 5508 - the plan was to upgrade the existing contract on the 4402 once they were swapped out, but I'll let you know whats going on
Rob

Photoshop CS6 suddenly trial version. Trial now "run out". Unable to use software.

My copy of Photoshop CS6 was suddenly marked down as a trial version, and now I can no longer even open the program.
I bought and paid for this program. Why am I suddenly not able to use it? How can I fix this?
(Also, am I the only one a little miffed that Adobe doesn't allow you to get DIRECT HELP unless you're a "premium member"?)

Try using menu Help>Activate if that item is there. That menu item should switch to Deactivate when the install is activated. Activation I believe writes some hidden data onto your disk it sound like it no longer there.

Help : Unable to use Java Beans in Oracle forms 6i

Hi ,
I have been trying to run few sample code to understand how to use Java beans in oracle forms 6i .But have been largely unsuccessfull.
It will be great if somebody can provide me with some simple form( and java code )which uses java beans concept to give some data to the java program and receive some data from it . Pls inform me about the settings that need to be done.
If you guys know it then pls take the pains of writing a simple form and java code.
i hope somebody will respond because your reply is very necesary for me to proceed.
U can email me the code > [email protected]
Thanks in advance.

Thanks for your reply Francois.
Actually i am not facing problem understanding the programming technique.
I think the problem at my end is more of a cofiguration one.I am using forms version 6i
on oracle 8.
Every time i set the imlementation class property of the bean area it gives an error 13010 which translates to that "the class being mentioned is not extending the IView class".
The class i have written extends VBean so i am not sure why this error is occuring.
I think if oracle (correctly) finds the java class to use then i will be able to proceed.
Pls reply.
If you have some code that is working fine then pls send it to me.And also inform is some environment variables have to be set for its use.

Help - Unable to use Phone in Brazil

I have traveled to 12 countries with my iPhone and it always just jumps on the network right when I get off the plane. Whether im in the Eastern Block (Prague) or in Thailand. NEver had a problem.
Here I am in Rio De Janeiro Brazil and it says "No Service". It even lists 5 carriers, and when I click on one, it says "Your carrier is no longer available" for each.
Is there a setting buried somewhere that I need to have enabled for this to work, that I might have inadvertently disabled?
Do you NEED to have international calling enabled through AT&T for the phone to hop on a local network when outside the country? I know there are a few different tiers of international fee's. One is a discounted international plan, and I think the other just enables your phone for international. I could be wrong.

Nevermind. Somehow "ATT WORLD CONNECT / WORLD TRAVELER" for $5.99 had been disabled on my account. I re-enabled it in the web site and that did the trick.

Unable to do Software update, access iTunes, use widgets on dash and upload

*_Here is the problem:_*
1. Unable to use Software Update. When I try I get: "+A networking error has occurred: timed out (-1001). Make sure you can connect to the Internet, then try again+" This is despite being connected to the internet and getting most things done.
2. Widgets which require data retrieval are not working. Notably weather and currency convertor.
3. iTunes cannot connect to the store. Tells me to check my network (which, if I do, I am told is fine, thanks)
4. Cannot view images (such as car rental vouchers) which are meant to display in email. In fact- the entire email disappeared before my eyes! But CAN, luckily, view on the server so I KNOW it is not just that the image is "spam" etc.
5. First thing on this list which made me wary- I cannot upload to YouTube, it times out ("unknown error" but timing out is mentioned) and this is using Firefox 3.8.3.
6. Safari will not load at all- it just keeps trying to load.
7. Displaying pages is slower than usual and downloading Onyx took ages and displayed no data regarding the file size or length of download time.
*_What I know:_*
1. I didn't update the last two times I was prompted because I was too busy to have it shut down on me and restart, etc.
2. I also had a go at trying to set up a web proxy and failed miserably. Though I actually changed the settings on another network to the one I am using I am so not network-literate that I fear that I have somehow done this to myself.
*_What I have tried:_*
1. safe starts, restarts,
2. deleting the preferences pertaining to Software Update from the various locations,
3. repaired permissions and-
4. thought of (I cannot afford to lose the data and haven't the time to back up just now- as per usual, this comes at the WORST time as I am on standby to fly out of the country due to VERY heavy and sad family affairs and need access to the files on the computer even if I cannot fully use the internet- just too many people/GB Pounds riding on this) using Onyx to try to "fix" this.
I have read up on others getting similar issues but am not certain that everyone has ALL the symptoms I am seeing (and then they may not be busy trying all these things on the one day and may not KNOW it is affected as well!). And I have tried each and every cure offered to these people. No good.

When you are going to be connecting to different networks that require different settings--such as proxies--you must establish different Locations in your Network System Preferences. If you're going to be connecting at college, you may want to set up a location called "College" and set the proxy settings so you can use it there. Then, when you want to go online at school, go to System Preferences -> Network and change your location to College. Then when you get home, change your settings back to "Automatic" or whatever you've named your home location.
Your Mac doesn't differentiate between networks it's connected to in order to automatically apply different settings. It relies on you to do that through the Locations set-up.
Anyway, glad it's working for you, and thanks for the star!

Neither software upgrade or Snow Leopard install disk will upgrade

Neither software upgrade or Snow Leopard install disk will upgrade
I run 10.5.5 and have tried to update my OSX using software upgrade and when I click install it greys out then a few seconds later it turns blue again and nothing happens.
So I purchased Snow Leopard hoping that would fix the problem. Well I insert the DVD and click install Snow Leopard, same thing, I click the blue install button, turns grey then a few seconds later turns blue again and nothing happens so I CANNOT UPGRADE!!
Anyone have some advice where to start?

Hi eastwooddesign;
Upgrading to fix problems usually doesn't succeed and generally make them worst.
Exactly what Snow Leopard disk do you have?
Did you boot from that DVD?
Allan

HT4972 Hi I am trying to upgrade my iPhone Model#A1303 to iOS6 through iTunes. The iOS is upgraded but activation is pending. Says activating serveris temporarily unavailable repeatedly and i am unable to use my phone. Please help to upgrade or restore.

Hi I am trying to upgrade my iPhone Model#A1303 to iOS6 through iTunes. The iOS is upgraded but activation is pending. Says activating serveris temporarily unavailable repeatedly and i am unable to use my phone. Please help to upgrade or restore.

That's usully symptomatic of a phone that was jailbroken or hacked to unlock it.

HT4623 im using i phone 4 and only today i notice that there is no software upgrade on my settings.can u pls help me

i;m using i phone 4 but there is no software upgrade on the settings.anybody who can help coz i accnot upgrade

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972

Upgrading to Mountain Lion using free upgrade, download froze halfway, tried again and unable to use same code twice. Please help?

Upgrading to Mountain Lion using free upgrade, download froze halfway, tried again and unable to use same code twice. Is there a way I can get a new code without having to submit other information (scan/photo of proof of purchase)?

Open the App Store and navigate to the Purchases tab. You should see Mountain Lion there. You can click there to restart the download.

HT1414 I had downloaded the software upgrade for my iPad. Since then I am unable to use the iPad

I had downloaded iOS6 on my iPad. Since then I am unable to use the iPad. The internet does not run on it

can you explain more not sure what you mean by "the internet doesnt run on it"

Help Unable to use software upgrade

Similar Messages

Maybe you are looking for