HELP understanding multicam in Premiere CC2014

So I use multi-cam editing in Premiere Pro CS6 every day, so I understand the concept. Now that we've updated to CC2014, I just can't seem to figure it out.
For starters, I used to just synch all my clips in a normal timeline, and then nest that timeline in a new sequence, right click, choose "Multi-Cam Sequence" and I was good to go. I just opened up the dedicated multi-cam window and I was all set to edit by live switching between cameras, the play head followed along in the timeline.
So I tried this in CC2014, since there is no dedicated multi-cam window, I have to double click the multi-cam nest and the source monitor transforms into a multi-cam window. All good. But when I select different cameras, the audio switches with the current camera, where as previously it would just add up all the nested audio no matter which camera I'm on. I have since discovered that from the program monitor options, if I select "Multi Camera" as the view (more on this in a moment) it will now allow me to select or deselect "Multi Camera Audio follows Video." This option seems to have effect in the source monitor either way. What would happen if I had a separate track of just audio? Do I have no way to select this "camera" as the source audio?
If I play from inside the Source monitor, while playing I can switch between cameras and the audio will stay on the last selected camera. Ok, I think, it's kind of working... but then when I stop to see the edits that I made while live switching, it turns out that NO EDITS were made in the time line. It just changes the camera angle of the whole track, no edits, no live switching. I'm utterly lost. The yellow boarder around the current camera angle never turns red for me, indicating that it isn't recoding anything. Also the play head does not move in the timeline.
Now I've discovered that the Program monitor settings has it's own option for multi-cam. So I switch from "Composite View" to "Multi-Camera" and this is what I see:
The current selected camera angle is there, but then there is black. I currently have 4 different camera angle layers. Clicking on either of these two multi-camera Program views does nothing.
TLDR version: I can't get the selected audio track to stay put, and I can't get multi cam to live switch. Whats going on here?
-denez

You need to make the multicam button in the button editor in the Program Monitor visible first.
Stack the clips in sequence
Go to Project window and make a new sequence from this sequence and call it e.g. MC,
Enable Multicam in the timeline (right click nest) and in the Program Monitor (wrench).
Then you are good to go.

Similar Messages

I need help understanding how the Apple components integrate to create a system across all my devices?

I need help understanding how the Apple components connect to create a whole system across all my devices?
Is there a resource that describes current system and associated functionality?
For example:
Buy A, B, C to achieve "X"
You will need:
an internet provider which supports <specs>
add D to achieve "Y"
You will need:
an internet provider which supports <specs>
add "E" to achieve "Z"
You will need:
an internet provider which supports <specs>
For example, I am looking at the Gen 6 Airport extreme. For intended performance do I need broadband? if so what are the specs, or will basic internet service suffice? Do I need the internet provider's modem or does the Airport extreme replace that? And then I think, if I am doing this, I should also look at Apple TV....What do I need and Why? Then I look at the New Desk top coming out in the fall, and I think well, if I wait and get this, what does this component do for the system, and what becomes redundant? What does this awesome desktop do for my ability to sit and use a new macbook air when I travel or sit on the couch in my PJs?
If there was a place that plainly stated "if you buy the new dektop you can configure a system including only these components and achieve <this result> and by adding <additional components> you will achieve this result.
I have been to the genius store a few times, but I come out of there more confused unless I have SPECIFIC questions or already know what to buy.
A "System Configuration App" would be a really great sales tool--Just saying.

I have no idea what "fully optimized" means.
No Apple device will let you watch broadcast TV. The Apple TV is a good option for watching streaming TV from iTunes, NetFlix and Hulu. If you want to watch from other sources, you may need to look at other devices.
Any Mac computer or iPad will allow you to surf the web.
What business software?
Time Capsule is a good option for back ups.
Update what across all devices?
For accessing documents from all devices, a service like Dropbox is your best bet.
I have no idea what "step as far away from an internet provider as possible" means. If you want Internet access, you need an Internet provider.
Lighting fast speed for what? Processor? The specs are listed for all devices in the Online Store. Internet? We're back to the service provider.
Technology changes. The only way to keep pace with it beyond a couple of years is to buy new stuff.
The bottom line is you need to look at the specs for devices availble and at your budget and decide what best meets your needs. If you are unable to do that on your own, there are lot of technology consultants out there who will, for a fee, look at your exact situation, make recommendations and even handle the purchase and set up. Perhaps that would be the best route for you.
Best of luck.

Import finished with few errors...Help understanding it!

Hi all,
Yesterday, I finished to do an import in oracle. I used the impdp command and got few errors after the import was done. Here are some bits from my log. It was very long but I shortened it with the most common errors. I would appreciate your help understanding what does each error mean, and whether there's a solution available.
Thanks!
El sql que falla es:
CREATE TABLESPACE "SYSAUX" DATAFILE SIZE 125829120 LOGGING ONLINE PERMANENT BLOCKSIZE 16384 EXTENT MANAGEMENT LOCAL AUTOALLOCATE DEFAULT NOCOMPRESS SEGMENT SPACE MANAGEMENT AUTO
ORA-39083: Fallo de creación del tipo de objeto TABLESPACE con el error:
ORA-02236: nombre de archivo no válido
El sql que falla es:
CREATE TABLESPACE "IN_SGC_BD" DATAFILE '+DISKGROUP_BD/sgtc/datafile/rsgtc_in_sgt_bd1' SIZE 132120576 LOGGING ONLINE PERMANENT BLOCKSIZE 16384 EXTENT MANAGEMENT LOCAL AUTOALLOCATE DEFAULT NOCOMPRESS SEGMENT SPACE MANAGEMENT MANUAL
Procesando el tipo de objeto DATABASE_EXPORT/PASSWORD_VERIFY_FUNCTION
ORA-31684: El tipo de objeto PASSWORD_VERIFY_FUNCTION ya existe
Procesando el tipo de objeto DATABASE_EXPORT/SCHEMA/SEQUENCE/GRANT/OWNER_GRANT/OBJECT_GRANT
ORA-39111: Se ha saltado el tipo de objeto dependiente OBJECT_GRANT:"SYSTEM", ya existe el tipo de objeto base SEQUENCE:"SYSTEM"."SDE_LOGFILE_LID_GEN"
ORA-39083: Fallo de creación del tipo de objeto SYNONYM con el error:
ORA-00995: falta el identificador de sinónimos o no es válido
BEGIN
dbms_resource_manager.create_consumer_group('AUTO_TASK_CONSUMER_GROUP','System maintenance task consumer group','ROUND-ROBIN');COMMIT; END;
Procesando el tipo de objeto DATABASE_EXPORT/SYSTEM_PROCOBJACT/POST_SYSTEM_ACTIONS/PROCACT_SYSTEM
ORA-39083: Fallo de creación del tipo de objeto PROCACT_SYSTEM con el error:
ORA-29393: el usuario JAIMESP no existe o no está conectado
El sql que falla es:
BEGIN
dbms_resource_manager.create_plan_directive('PLAN_DIA','SGTC_USR','',30,NULL,NULL,NULL,NULL,NULL,NULL,NULL,30,600,5,'SGTC_SWITCH',NULL,TRUE,NULL,10240,1800,900,1800);
dbms_resource_manager.create_plan_directive('PLAN_DIA','SGTC_EDITOR','',40,NULL,NULL,NULL,NULL,NULL,NULL,NULL,10,600,10,'SGTC_SWITCH',NULL,TRUE,NULL,512000,1800,600,3600);
dbms_r
ORA-39083: Fallo de creación del tipo de objeto PROCACT_SYSTEM con el error:
ORA-06550: línea 2, columna 72:
PLS-00103: Se ha encontrado el símbolo "CHECK" cuando se esperaba uno de los siguientes:
in like like2 like4 likec between member submultiset
Procesando el tipo de objeto DATABASE_EXPORT/SCHEMA/TABLE/TABLE
ORA-39151: La tabla "OUTLN"."OL$" existe. Todos los metadados dependientes y los datos se saltarán debido table_exists_action de saltar
Procesando el tipo de objeto DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA
. . "SIGELEC"."SDE_BLK_37" 4.976 KB 0 filas importadas
. . "SIGELEC"."SDE_BLK_38" 4.968 KB 0 filas importadas
. . "SGC_BD"."BDE_CRECOBJE" 5.234 KB 0 filas importadas
. . "SIGELEC"."D418" 4.851 KB 0 filas importadas
. . "SYSTEM"."DBM_TOPSQL" 6.125 KB 0 filas importadas
. . "SIGELEC"."F100" 5.562 KB 0 filas importadas
. . "SIGELEC"."F101" 5.593 KB 0 filas importadas
. . "SIGELEC"."F102" 14.77 KB 11 filas importadas
Procesando el tipo de objeto DATABASE_EXPORT/SCHEMA/PROCEDURE/ALTER_PROCEDURE
ORA-39082: El tipo de objeto ALTER_PROCEDURE:"SYSTEM"."GEN_ROLE_SGTC" se ha creado con advertencias de compilación
ORA-39083: Fallo de creación del tipo de objeto PACKAGE_BODY con el error:
ORA-04052: se ha producido un error al consultar el objeto remoto ENLACE.ELPQ_DATOPROY@CRE
ORA-00604: se ha producido un error a nivel 4 de SQL recursivo
ORA-12154: TNS:no se ha podido resolver el identificador de conexión especificado
ORA-39082: El tipo de objeto TRIGGER:"SIGERED"."TR_CTRL_ENERGIZA" se ha creado con advertencias de compilación
ORA-39083: Fallo de creación del tipo de objeto TRIGGER con el error:
ORA-04052: se ha producido un error al consultar el objeto remoto ENLACE.ELPQ_DATOCONS@CRE
ORA-00604: se ha producido un error a nivel 4 de SQL recursivo
ORA-12154: TNS:no se ha podido resolver el identificador de conexión especificado
El sql que falla es:
ALTER TRIGGER "SIGERED"."TR_CTRL_ENERGIZA" COMPILE PLSQL_OPTIMIZE_LEVEL= 2 PLSQL_CODE_TYPE= INTERPRETED PLSCOPE_SETTINGS= 'IDENTIFIERS:NONE'
ORA-39082: El tipo de objeto TRIGGER:"SIGERED"."TR_CTRL_CONCLUYE" se ha creado con advertencias de compilación
El sql que falla es:
BEGIN SYS.DBMS_IJOB.SUBMIT( JOB=> 165, LUSER=> 'SYSTEM', PUSER=> 'SYSTEM', CUSER=> 'SYSTEM', NEXT_DATE=> TO_DATE('2012-05-02 01:00:00', 'YYYY-MM-DD:HH24:MI:SS'), INTERVAL=> 'TRUNC(SYSDATE+1)+1/24', BROKEN=> FALSE, WHAT=> 'dbms_stats.gather_schema_stats(ownname => ''SIGERED'',options => ''GATHER'',estimate_percent => null,method_opt => ''FOR ALL COLUMNS SIZE 1'',cas
ORA-39083: Fallo de creación del tipo de objeto JOB con el error:
ORA-00001: restricción única (SYS.I_JOB_JOB) violada
El sql que falla es:
BEGIN SYS.DBMS_IJOB.SUBMIT( JOB=> 47, LUSER=> 'SIGERED', PUSER=> 'SIGERED', CUSER=> 'SIGERED', NEXT_DATE=> TO_DATE('2012-05-02 01:00:00', 'YYYY-MM-DD:HH24:MI:SS'), INTERVAL=> 'TRUNC(SYSDATE+1)+01/24', BROKEN=> FALSE, WHAT=> 'SIGERED.RDPQ_PROYECTOS.PR_PROCESAR;', NLSENV=> 'NLS_LANGUAGE=''AMERICAN'' NLS_TERRITORY=''AMERICA'' NLS_CURRENCY=''$'' NLS_ISO_CURRENCY=''AMERI
Procesando el tipo de objeto DATABASE_EXPORT/SCHEMA/POST_SCHEMA/PROCACT_SCHEMA
Procesando el tipo de objeto DATABASE_EXPORT/SCHEMA/PASSWORD_HISTORY
ORA-39083: Fallo de creación del tipo de objeto PASSWORD_HISTORY con el error:
ORA-01858: se ha encontrado un carácter no numérico donde se esperaba uno numérico
El trabajo "SYS"."SYS_IMPORT_FULL_01" ha terminado con 2249 error(es) en 17:21:02

Hello people,
I just run for the second time a full import, and it said it finished correctly.
The first time I run it, there was a message which said that the import had finished with 2249 errors (I checked my log and not all of them were errors but messages). I checked each single message and only had to solve a couple of things.
I first created a user in response to an ora-29393: user string does not exist or is not logged on.
The second thing I did was to run the utlrp.sql file in response to an ORA-39082. I did this according to this blog.
I know oracle is taking precedence each time I run an import. I don’t know if what I have done is okay or perhaps not all data was imported after all. This is the thread which I posted initially when errors came out.
Any reply is a supply.
Thanks loads

Help understand how this works

Hows everyone doing, i need some help understand this. This is my first time using Lulu. From the reviews i'v read about it they tell me this is the #1 place to come to to get my books printed. Here the question, i have all 3 of my books ready to be uploaded do i just sent that in, then they send me the prints ? or so they self them for me. Sorry if this seems like a dumb question, but its my first time using this particular site.

Here's a quick overview:
You start the new book wizard. Click "Create," pick a book type and size (hardcover, paperback, etc.; 6x9, 8.5 x 11, etc.), and click "Make this book."
Hint: If you want the widest distribution for your book, pick a size / type that has a green checkmark next to it.
The wizard will guide you to name your book, apply an ISBN (or get a free one), upload your contents, and upload your cover or design a cover. It will guide you to set pricing and distribution, and many other options.
When you've done all that, your book will be available to order. You will see two prices: the one you pay, and the one other people pay. The one you pay is the printing cost per book. It may be anywhere from $2.50 to $20.00 or more, depending on options you pick -- probably coser to the low end.
On that first page, where it says "Create," there is a calculator that will figure roughly what your book will cost (printing costs), so you can plan your options around that calculator.
So you order as many books as you want, pick shipping, pay with a credit card, and in a few days, the books are on your doorstep.
I hope that helps.

69 Free Tutorial Videos to Help You Learn Adobe Premiere Pro CS6

This is a link to Creative Cow Youtube channel for 69 Free Tutorial Videos to Help You Learn Adobe Premiere Pro CS6, I feel it would help somebody Also like to thanks Creative Cow for the valuable resource and give them credit
Adobe Premiere Pro | Creative COW - YouTube
[Link corrected]

Looks like they're not all for CS6.

Help understanding ABAP Proxies

Can someone point me to documentation to help understand ABAP proxies? What they are, why I would use them and what are the considerations in using them over BAPI's or IDOCS? I had a recent discussion with someone who is choosing to not use them because of security considerations.

Hi Rick,
For ABAP proxy documentation refer...
http://help.sap.com/saphelp_nw04/helpdata/en/ab/585f3c482a7331e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/content.htm
For considerations in using proxy over BAPI's or IDOCS Refer...
/people/ravikumar.allampallam/blog/2005/08/14/choose-the-right-adapter-to-integrate-with-sap-systems
Regards
Anand

I need help installing my adobe premiere element 13. the soft ware is 3.5 GB and I have a 654.4GB space is this enought space to dowload the software. It appears the software is downloading , but when it gets to the end it gives me the error summary messa

I need help installing my adobe premiere element 13. the soft ware is 3.5 GB and I have a 654.4GB space is this enought space to dowload the software. It appears the software is downloading , but when it gets to the end it gives me the error summary message. I have been on the phone for hours being transfered from from person to the next with no results.

reesep
This is not Adobe. Rather user to user. The Adobe Staff and PRE_help presence in this forum is undefined.
The replies from here are not instantaneous. But, your fellow users all try to respond as timely as possible.
What is your computer operating system?
From where are you downloading Premiere Elements 13....direct from Adobe as the tryout or the purchased product? If the purchased product, do you now have a purchased serial number to go with the installation files?
Where are you stopped in the installation....at the Sign In or before? Is the faulting module cited in any messages? What are the error messages?
The usual questions:
1. Are you working with the antivirus and firewall(s) disabled?
2. Are you running the computer programs as administrator?
3. Are you working with a pen and tablet device instead of mouse?
4. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
5. Are you installing the program to the default location on the Local Disc C (if Windows).
Let us start here and then decide what next based on the details that you post. Subsequent troubleshooting may include:
deletion of the Adobe Premiere Elements Prefs file and/or uninstall, free ccleaner run through, reinstall with antivirus and firewall(s) disabled.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC

Dear Adobe Community,
I got my first imac a few days ago, and i decided to install Adobe CC.
When i want to run Adobe Bridge, says "the operation could not be completed", the same happens with Adobe After Effects.
And I also have a problem with Premiere, when i want to export a project says that premiere must close.
This is the try version, is this a problem of Adobe or Apple? i'm very worried
Help!
Thank you!
Ivana

Muchas gracias!!! Ha funcionado!
El 11/02/2014, a las 00:02, Federico Platon <[email protected]> escribió:
Re: PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC
created by Federico Platon in Foros de usuario a usuario - View the full discussion
Confirma que se trata de una cuestión de permisos.
Por cierto te aconsejos actualices la 9.1 a 9.2, posiblemente se habría arreglado así también.
Bueno los pasos son:
2. Select Go from the Finder Menu.
3. Select Computer.
4. Select Macintosh HD.
5. Select Users.
6. Select your user profile.
7. Right click on user profile. Select Get Info.
8. Go to bottom and unlock with admin password to make changes.
9. Make sure your user profile has Read and Write privileges by selecting from dropdown menu.
10. Go down to wheel at very bottom and select Apply to enclosed items. This should allow Adobe Bridge to run properly.
Creo que no se necesita traducción.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6107188#6107188
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6107188#6107188
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6107188#6107188. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Foros de usuario a usuario at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Need some help understanding the way materialized views are applied through

Hi, I need some help understanding the way materialized views are applied through adpatch.
In patch 1, we have a mv with build mode immediate. When applying it PTS hang due to pool performance of mv refresh.
So we provide patch 2, with that mv build mode deferred, hoping it'll go through. But patch 2 hang too on the same mv.
How does this work? Is that because mv already exists in the database with build immediate, patch 2 will force it to refresh first before changing build mode? How to get over this?
Thanks,
Wei

Hi Hussein,
Thank you for the response.
Application release is 11.5.10.
Patch 1 is MSC11510: 8639586 ASCP ENGINE RUP#38 PATCH FOR 11.5.10 BRANCH
Patch 2 is MSC11510: 9001833 APCC MSC_PHUB_CUSTOMERS_MV WORKER IS STUCK ON "DB FILE SEQUENTIAL READ" 12 HOURS
The MV is APPS.MSC_PHUB_CUSTOMERS_MV
This happens at customer environment but not reproducable in our internal environment, as our testing data is much smaller.
Taking closer look in the logs, I saw actually when applying both patch 1 and patch 2, MV doesn't exist in the database. So seems my previous assumption is wrong. Still, strange that patch 2 contains only one file which is the MV.xdf, it took 7 hours and finally got killed.
-- patch 1 log
Materialized View Name is MSC_PHUB_CUSTOMERS_MV
Materialized View does not exist in the target database
Executing create Statement
Create Statement is
CREATE MATERIALIZED VIEW "APPS"."MSC_PHUB_CUSTOMERS_MV"
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 10 MAXTRANS 255 LOGGING
STORAGE(INITIAL 4096 NEXT 131072 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 4 FREELIST GROUPS 4 BUFFER_POOL DEFAULT)
TABLESPACE "APPS_TS_SUMMARY"
BUILD IMMEDIATE
USING INDEX
REFRESH FORCE ON DEMAND
WITH ROWID USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS select distinct
from
dual
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Feb 02 2010 10:01:46
Manager says to quit.
-- patch 2 log
Materialized View Name is MSC_PHUB_CUSTOMERS_MV
Materialized View does not exist in the target database
Executing create Statement
Create Statement is
CREATE MATERIALIZED VIEW "APPS"."MSC_PHUB_CUSTOMERS_MV"
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 10 MAXTRANS 255 LOGGING
STORAGE(INITIAL 4096 NEXT 131072 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 4 FREELIST GROUPS 4 BUFFER_POOL DEFAULT)
TABLESPACE "APPS_TS_SUMMARY"
BUILD DEFERRED
USING INDEX
REFRESH COMPLETE ON DEMAND
WITH ROWID USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS select distinct
from dual
Start time for statement above is Tue Feb 02 10:05:06 GMT 2010
Exception occured ORA-00028: your session has been killed
ORA-00028: your session has been killed
ORA-06512: at "APPS.AD_MV", line 116
ORA-06512: at "APPS.AD_MV", line 258
ORA-06512: at line 1
java.sql.SQLException: ORA-00028: your session has been killed
ORA-00028: your session has been killed
ORA-06512: at "APPS.AD_MV", line 116
ORA-06512: at "APPS.AD_MV", line 258
ORA-06512: at line 1
Exception occured :No more data to read from socket
AD Run Java Command is complete.
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Feb 02 2010 19:51:27
Start time for statement above is Tue Feb 02 12:44:52 GMT 2010
End time for statement above is Tue Feb 02 19:51:29 GMT 2010
Thanks,
Wei

Help - Premiere CC2014 When exporting it's not using my whole CPU LONG EXPORTS

Using my recently built computer with:
250gb SSD samsung (Software)
2TB HD 7200 rpm (media, export)
6 core I7 4930K
Noctua SSO CPU cooler
Nvidia Geforce 770 4gb GPU
32 gb of ram
750 watt power supply
Asus mobo
Pretty decent computer. that shouldnt have problems exporting pretty basic videos.
I am exporting for the web. .h264 CBR with 12-16 mbps or similar
No Max rendering checked.
using multiple camera files from Sony, Canon, Gopro.
When it starts exporting a video that is 20 minutes long will take 4 hours to export. Video that is 3 minutes long (right now) is taking 25 minuts to export. That didn't used to be the case.
I open my Task manager and look at the processor it is only using 1 core at about 10%
I do have GPU acceleration on but I have switched it on and off and it hasn't made a difference.
I believe when I exported from my CS5 version it would use the whole processor and hash it out real quick.
THE BIG QUESTION: IS THERE ANY SETTINGS I NEED TO CHANGE TO OPTIMIZE MY COMPUTERS HARDWARE TO EXPORT THINGS EFFICIENTLY.
Anyone have this problem and find a solution for it?
I am new to usin the adobe community and problem solving on forums so let me know if I didn't give you enough information.

I too have this problem, and it seems to be relatively new. I'm trying to figure out if there's anything I changed, but I can't place it. I've read a few threads with people having this same issue though, so I don't feel like it's anything I've done.
The only solution I've come across is to do a restart. After restarting, I open AME and just start my queue. It then utilizes all cores. Tomorrow I'm going to attempt to install a previous version of AME and see if the problem goes away.
This thread mentions a solution: AME CC2014 Very Slow Encoding
However, I believe this solution does not work. I did as it says, and it only temporarily fixed it, and I think that was due to the restart. Also, my power settings are set to Performance.

NEED HELP ASAP Updated to Premiere Pro CC 2014 and now .MTS files are unsupported/unrecognized

I Have Windows 8
3.4 Ghz 8 Core Intel i7
32 GB Ram
PPCC2014
I was using Premiere Pro CC for the last year or so and .MTS Files have worked fine. Since I upgraded. I can no longer use .MTS Files.
I sync all of my footage using Plural Eyes. I updated plural eyes so that it would work with the New Premiere Pro CC 2014 update.
I tried going back to Premiere Pro CC; however, that was updated as well. It does recognize the .MTS files there, but it doesn't import the new .xml correctly created from Plural Eyes 3.5
If anyone knows any help or workaround so I can complete my TV episode. That would be great.
Also, I would prefer not to have to Transcode anything. Hours and Hours and Huge files won't really work.
I've also looked in to Re-wrapping. I understand Clipwrap is great for that; however, I have Windows not Mac. Other options look way too involved. I'd really just like my Premiere Pro to work the way it's supposed to,.
Does Adobe Media Encoder Rewrap?
Anyway, any ideas would be helpful.
Thanks

Thank You, Thank You!!!! That worked. I had to "Link Media" to the new file path, after I renamed the parent folder; however, it's working!!!! Hopefully there will be a fix for that soon!

Adding video transitions using Multicam in Premiere CC not working

Just tried to a video transition to a Multicam timeline between a camera switch and it does add the transition in the timeline but only plays back as a cut as if no transition was applied. Also, using the shortcut CTRL D doesn't add the transition but does it show up in the history that it applied a transition.
I used a Dissolve transition and it shows the video dissolving between the 2 video source in the transition Effects Control window, just doesn't work in the timeline when playing it back. Rendering the timeline doesn't work either, still a cut transition.
Actually, just tried the CTRL D shortcut and it is now working.
Now the transition shows up when going to the Export menu and looking at the video in the Preview window and when exported the dissolve is there so the only problem is that the video transitions can't be seen when playing from the timeline.
Decided to close down Premiere, restart it and reload the project and now the transition works in the timeline.
Actually, here what happens. You can't see transitions when the Program monitor is in Multicam mode, you need to switch is back to Composite mode then the transition will preview when playing from the timeline. Now I just checked and you can scrub through the transition and see it when the Program monitor is in the Multicam mode.

scroll down the page to
Cross-platform support for video effects and transitions
Adobe Premiere Pro Help | New features summary

Multicam in Premiere CC

I have a few questions that I can't seem to find on my own. With multicam, the workflow has changed. Used to I could line up my clips in a sequence, then drag and drop that sequence into a new one to do the edits. Now I have to select the clips and make a new sequence, it would seem. I'm having to line up the clips by seeing the audio waveform since I don't have a timecode or other sync methods. My issue is that on Premiere 5.5 I could edit the audio in the original timeline and apply a track effect with the audio tools I needed. Then it would already be there in the new sequence. Is there any way to do this now? Each week I use the previous week's setup as a template since all my graphics and bumpers are stored in there. Help please!

You're welcome.
http://blogs.adobe.com/kevinmonahan/2013/09/11/marking-posts-as-correct-or-helpful-on-the- adobe-forums/

EMOD HELP- understanding campaign recipient metrics - need emod pro

Hi,
I have sent a Campaign out to 27k customers on the 19th January (first time EMOD user).
I need to create reports and analyses based on recipient metrics. So far, I have loaded a report using the Campaign Response History in CRM Reports and downloaded this into excel. What I am trying to find out is how many out of the 27k have received the email (delivered) and how many have bounced back.
*1.* Firstly I'd like to undertand what exactly do # of Recipients, # of Recipients, # of Hard Bounces, # of Open Responses, # of Responders, # of Responses, mean? So far I have figured out that soft + hard + open = # responses. Not sure if that is correct?
*2.* Some lines show blank in the count of # recipients, #responses etc... however there is an email address in the appropriate column. Has the email been sent or not? Has it been delivered? How can we make sure?
*3.* Then, looking at the 'Email' columns in my excel spreadsheet (this is who we sent the campaign to), it looks like some email addresses are missing (blank) however they are in CRM? Has the campaign been sent or not?
*4.* I'd also like to understand some individual lines reading as:
# recipient: 44
# soft bounces: 0
# hard bounces 15
# responders 28
# responses 35
# opened 20
email address: [email protected]
Is all of this for just 1 single email? Does this mean that the email was sent multiple times to just one single address? Why do the # recipients show 44?
*5.* Why do some lines show responses metrics if the email is blank?
*6.* On the overall campaign, how can I accurately measure the number of emails that have been sent and delivered?
Any answer to these questions would be great - sorry I know there are loads of questions.
Kind regards
Carine

Carine, here is my response:
1) See below for definitions.
2) All email recipients who have an email address and who do not have the Never Email flag checked are Sent an email. Whether they receive it or not is not always known. See below for explanation of why we don't always know if an email was received.
3) I'd have to see the report to understand what you are describing.
4) # of Recipients - Count of Campaign Recipients
# of Responses - Count of All Campaign Responses (Opt in to List, Opt out from List, Global Opt-out, Global Opt-in, Click-through on trackable url, opened email with images turned on)
# of Responders - Count of All respondents for a campaign (how many recipients clicked something?)
# Hard Bounces - Count of responses where response type equal to ‘Hard Bounce’
# Soft Bounces - Count of responses where response type equal to ‘Soft Bounce’
# of Open Responses - Count of responses where response type equal to ‘Message Opened’
# of Click Through - Count of responses where response type equal to ‘Click-through’
# of Opt Ins - Count of responses where response type equal to ‘Opt-in’
# of Opt Outs - Count of responses where response type equal to ‘Opt-out’
# of Global Opt Ins - Count of responses where response type equal to ‘Global Opt-in’
# of Global Opt Outs - Count of responses where response type equal to ‘Global Opt-out’
If your report was set up to report on one email campaign, then this is what the metrics are reporting on.
5) I'd have to see the report to understand what you are describing.
6) The recieving email server does not always tell EMOD that a message was received. If the email contained the Track Message Open tag, and the recipient receives html email and has images turned on, then EMOD will get notified that this email was opened. Otherwise, EMOD does not know if the message was opened or not (unless the recipient clicked something).
Hope this helps.

Can you help me with this Premiere CS4 error? (picture included)

Hello
I have Adobe Premiere CS4 and when I recently updated to 4.2.1 many of my videos now do not have playback in the source or edit windows. Some are black screens, and some are turquiose during playback. If I click on the edit window to select the video frame and move it within the edit window (say to the left side) it will play back with a turquoise overlay and show the video behind it enlarged. This ONLY happened when I did the update. I am running Windows 7 64bit. When it was at 4.0.0 everything ran just fine. The video I have been working on is a 1080p .MOV file. Has anyone else seen this? There is a picture of the problem below.
Thanks for any help!
James Poremba

Updates, whether with a program, or the OS from MS (or Apple), can cause all sorts of driver issues. These are most often seen with video and audio drivers. Just a simple OS hot-fix can render these obsolete instantly. Also, some recent nVidia drivers contained some "gamer-only" modules for things like 3D rendering and 3D stereovision for use with nVidia goggles. These seem to have been updated, so that these modules do not bring Adobe programs to their knees.
A couple of XP-Pro hot-fixes messed up my nVidia Quadro in PS. A simple driver update fixed those. I had gone more than 6 mos. with not one problem, and then installed the hot-fixes and BOOM!
Good luck,
Hunt

HELP understanding multicam in Premiere CC2014

Similar Messages

Maybe you are looking for