HELP!! Update of 7.0 wont work - Error Message
I really need some help - and hope that you can send it my way.
I just completed the download of 7.0 update for Itunes but when I go to run the download it gives me an error message that reads:
not a valid WIN32 application.
What does that mean and how can I get the update to work?
If you can help me out - It would be greatly appreciated.
try KayJee's suggestions from this post:
http://discussions.apple.com/thread.jspa?messageID=3172013#3172013
Similar Messages
-
My iphone 4 has died and says connect to itunes. itunes restore wont work, error message 2001, then 2006 appears.Tried all the troubleshooting help, but nothing works. Any ideas???
I solved my own problem. Hopefully this will help someone else.
I did a DFU restore, then started it up as a new phone on iTunes. Everything loaded properly, then from iTunes did a restore from backup, selected the one I wanted and it still took me to the same screen with 3 options of restore. I chose the start up as new phone from the actual phone and after all the syncing was completed, my phone is back in working order. -
update 11.1.4 wont work on xp
That is too bad.
When you are actually ready for help, provide specifics of the problem that is occurring. We are NOT mind readers.
Alternatively, search the forums for the error that is occurring. -
I have an iPhone 4. I tried updating it tonight to iOS7 through my just updated iTunes. I received an error message telling me the update couldn't be completed. My phone then went to the screen asking me to connect to iTunes which can't see my phone. Help!!
micron12
Hi I had a simular problem with my iPhone 4 and iPad 3 and found that the USB connection on the computer was at fault so I moved the connection to a USB port on the Mother board.This curred my problem,see if ti works for you.
Windows 7 and windows XP -
i cant update my iphone via itune. ERROR message 1015. have updated and done all the trouble shooting, still didn't work out. I tried, reinstalling everything, nothing happens, this is suck! can't use my iphone!
http://support.apple.com/kb/TS3694#error1
-
Abc wont work error code 400-1
Abc wont work error code 400-1
Hey xoxokt,
Thanks for the question. The following resource outlines troubleshooting information for third-party content providers on Apple TV:
Apple TV: Troubleshooting third-party content providers
http://support.apple.com/kb/HT200072
If you have playback issues with a content provider's services
In most cases, you can isolate playback issues to your home network, your broadband connection, or a possible outage with a content provider. To see if your issue is affecting multiple services or a specific content provider, try another service. For example, play a movie trailer from the main menu.
- If the issue is affecting multiple services on your Apple TV, see how to troubleshoot playback performance.
- If the issue is affecting a single content provider on your Apple TV, restart your Apple TV by going to Settings > General > Restart. If the issue continues, you might need to contact the content provider.
Thanks,
Matt M. -
I downloaded the update and now it wont work.
I downloaded the update and now it wont work. It just shows me a screen with a lightning chord going to the Itunes icon. Am I supposed to plug it into my mac or something?
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
Trying to update iTunes and i get an error message saying something about "invalid signature". Help?
Trying to update iTunes and i get an error message saying something about "invalid signature". Help?
" The feature you are trying to use is on a network resource that is unavailable. I tried to uninstall iTunes, and it would not uninstall. It gave me the following message " The path C:\documents and settings\network service\local settings\application data\apple\apple software update\iTunes.msi cannot be found.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
When I update apple driver, a pop-up error message "The folder you specified doesn't contain a compatible driver for your device. If the foldre contains a driver, make sure it is designed to work with Windows for x64-based systems."
Hi,
Please also check Event Viewer if it identify this problem.
In addition, also check Device Manager, if similar driver already installed, try to uninstall them and reinstall new driver again for test.
Roger Lu
TechNet Community Support -
Every time I install an update of itunes, I get an error message saying: "/System/Library/Extensions/WkClassicNotSeizeDriver.Kext" was not installed Correctly. Has any one had it? Can you help me?
Find out what that third party software the kext file belongs to and update or use the developers method to uninstall the third party software responsible for it.
I suspect it's a iTunes extension perhaps?
You also can use the manual method of Finder > Go > Computer and opening your drive, then your System/Library/Extensions folder and looking for the file and moving it out onto the desktop, you will need to be in Admin user and use your password, then reboot to clear the random access memory. However this method doesn't remove the parent program you still need to do that.
How to uninstall/install software on your Mac
The kext file wasn't loaded, so it's not running, but removing it from the Extensions folder or uninstalling what put it there will solve your notification problem as that's all it appears to be. -
For some reason, I keep getting the "iTunes has stopped working" error message on my Dell Latitude E6520 when trying to sync photos to my iPhone 3GS. I am using Windows 7 on my 64-bit computer. iTunes will begin to optimize the photos in the folder I have directed it to (I am trying to load almost 3000 photos and videos), and it will go through optimizing all of them singularly, then get to the step where it says "optimizing" again, but does so in bigger groups. It will get to about 2000, and then the error message "iTunes has stopped working" will pop up, and say that "Windows must close the program and will search for a solution, and if it finds one, it will notify me". Why can't I sync these photos, and what can I do? Thanks so much for the help, I really appreciate it!
Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users.. -
Can't install iTunes 11 on Widows 8, 'iTunes has stopped working' error message
Two months ago, I bought a new computer that uses Windows 8. I was running iTunes 10.6 on it fine until today, when it crashed for some unknown reason. Every time I've tried to open it again, I kept on getting a 'iTunes has stopped working' message. I've uninstalled 10.6 and tried installing iTunes 11, but keep getting the same 'iTunes has stopped working' error message with no other details. I've tried installing it as an administrator, but got same failed results.
Any help?
Thanks, MikeSame problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users.. -
iTunes update 11.1.4 produces an error message R6034 "An applicaton has made an attempt to load the C runtime library incorrectly" When that error is acknowledged, a second windows error 1114 "error 7" displays "iTunes was not installed correctly". I also tried to downloadiTunes 11.1.4 at th Apple website and that did not work either-It stalled with an erro message that stated the "mobile service" would not open HELP!
Hi Doug! I was having the same problem but after reading a lot of answers I found the solution. First of all you need unistall ALL THE SOFTWARE OF APPLE from your computer, I mean BONJOUR, QUICKTIME, ITUNES, APPLE SOFTWARE UPDATE, APPLE MOBILE DEVICE SUPPORT and the other one that is from compatibility with apps of apple, after that you must verify if this folders are removed if they don't then remove it:
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple\
C:\Program Files\iTunes\
C:\Program Files\iPod\
If you have a 64-bit version of Windows, you'll need to confirm that the following folders have been removed:
C:\Program Files (x86)\Bonjour
C:\Program Files (x86)\Common Files\Apple\
C:\Program Files (x86)\iTunes\
C:\Program Files (x86)\iPod\
Then if you have ccleaner you can use it to clean all registers left, then reboot and try to install iTunes 11.1.4 again as administrator... That works for me, I hope that helps you too... -
The iphone software update server could not be contacted" - error message recieved when i try to update to 5.1.1 via itunes , what can i do ?
Dear Lawrence Finch:
If you're still around I hope you see this message, as you're the FIRST person (after reading every link, thread, other sites, apple support articles, etc.) to mention JB may be causing this iTunes popup window to REPEATEDLY occur:
"The iPhone software update server could not be contacted."
No, I did not hack anything (are you kidding? Grannies don't hack!), but I unknowingly bought a 3Gs iOS 3.1 from ebay that was not advertised as JB. Since it is like brand new, I was going to keep it (because my old backup is iOS 3.1.2) & was trying to simply restore & update, which (I thought) would remove the JB (that's what everybody says at forums, etc).
Instead, after "erasing all settings/content" (inside phone's Settings to get the prior person's name out of there), it is now stuck in White Apple Mode.
Put it in DFU/Recovery Mode & connect to iTunes but that stupid above message keeps appearing & I have already read/tried EVERYTHING to get rid of that message, starting with:
1. OLD phones (3Gs) with OLD iOS 3.1+ should work FINE with OLD Mac (iBook) with OLD OSX (Tiger 10.4.11) with OLD iTunes (9.2.1[5]). So that can't be the problem.
Here's all the other things apple & others say to check which I already checked:
2. USB ports are FINE, both work FINE, so that's not the problem.
3. No "extra USB devices" are connected, ONLY a mouse, & then the phone (yes, I tried it w/o the mouse connected but that didn't help).
4. No "usb hubs."
5. Latest iTunes for this OSX has already been DL'd (iTunes 9.2.1[5]). If you know of a newer one for this OSX, please advise.
6. No antivirus software.
7. No security software.
8. No routers; only 1 comcast modem, period. Wired Ethernet.
9. No wifi gadgets, no wifi at all.
10. No firewalls, except what is on iBook in the SHARING/System-Prefs. section. It's turned OFF.
11. Did the hosts/terminal thing sudo nano whatever it was. There were only 3 lines, NO gs.apple.com:
xxxxx local host
xxxxx broadcast host
xxxx local host
Oh, & btw, ATT officially unlocked this phone (after I filled out their online forms) but I can't finish the process via iTunes to get their Confirmation that "Device is Now Unlocked," so I can use T-Mo.
So that's it. If you have any other ideas of what to do from here, since from your comment, maybe it's the stupid JB on this phone that is causing the problem (???), please advise.
Many thanks! -
I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
I was taken through msconfigure and adjusted the startup tab but still no joy.
In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
The 1st message is;
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
When I click ok the next message that appears sometime later during the install is;
Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
The options I have are to abort, retry or ignore. If I retry the same message comes back and if I abort or ignore the download continues and I then get the following message:
'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
After attempting to reinstall itunes only some components were installed however itunes would not open.
It would appear many people have experienced problems with this latest download!'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?
Maybe you are looking for
-
Display image in standalone AIR application
I have loaded images and like to display image in standalone AIR application. But I cannot get it work. The code as follows: private function ImageLoader(url:String):void var request:URLRequest = new URLRequest(url); var loader:Loader = new Loader();
-
Printer has to be manually selected to print
Hello, I am using Adobe reader X on Win 7 pro x64. Whenever I open up a pdf and press Ctrl+P, scroll to file->print or press the print icon (only three ways I know how to print using reader) it just closes the dialog box and nothing happens. I then
-
The program I am writing is supposed to ask the user to input a 4-digit Integer whose digits are not all the same, and then place the number in descending and ascending order, then subtract until the number 6174 is met. I'm very new with java but I c
-
S_ALR_87013345 (profit centres Vendors): Balances are not showing
Dear experts, We have done F.5D, 1KEK transaction and after that when we execute S_ALR_87013345 (profit centres Vendors): it is not showing any balances but balances are appearing in S_ALR_87013344(open items-Profit centre payables) is showing corre
-
Hi! I installed Portal (minimal installation) in a Windows 2000 Server, but I need to migrate some older Forms (Developer 2000) and show them in Portal. How should I install Forms 6i? Should I install Enterprise Edition (I have made some applications