HELP!!! Updated my iphone5 to iOS 7.0.6 and unable to restore in DFU Mode
This is what happened :-
- Updated iOS7.0.6 on Iphone5 over WIFI
- Failed to update!.... Iphone displays Connect to Itunes screen
- Attached Iphone to laptop running Windows7 Home Premium
- Windows detects iphone and automatically updates driver
- iTunes window appears detecting Iphone in recovery mode, prompting restore iphone
- Successfully restored iPhone running latest version iOS 7.0.6
- All recent data lost!!
- Retrieved data from a last backup, Most but not all apps retrieved
- Updated all Apps over WIFI
- All apps on Iphone updated except for 4
- Selected 1 app to update.
- App almost updated but screen goes white with some fine vertical colourd lines before it goes blank (black).
- attempted a re-boot using power switch and home button - no response
- I connected Iphone to laptop
Itunes info box appears - has detected iphone in recovery mode. You must restore......
- Clicked 'OK' button
- Itunes window appears
- clicked on 'Iphone button' near top of window
- window changes to Iphone5
- displays Serial Number: N/a iPhone Recovery Mode .....Your iphone software is up to date .....
- Clicked on 'Restore Iphone'
- Itunes info box appears
- Clicked 'restore and Update' button
- displays Itunes is restoring the softeware on this phone
- Displays - Extracting Software
- Preparing Iphone for recovery
- Iphone displays Apple logo and progress bar.....
- Itunes window displays Waiting for Iphone ....
- Hour later progress bar has still not move!
- Clicked on x in window to quit
- ITunes Warning box appears
- clicked on 'Quit'
Iphone still displays logo & progress bar
Had to press power and home button, Screen before goes blank - Think this is DFU Mode?
Repeated this process several times!!
- Sometimes it show info box refering to Error 9
Have attempted the following solution but to no avail
- Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
- Plug the device's USB cable into your computer only.
- Hold down the device's Home button as you connect the USB cable to it.
- When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time.
Sadly the Connect to iTunes screen didnt appear !
I fixed my Iphone5 recover loop problem!!! I used""iREB"" and used the loop recovery button for iphone4 and it worked!!!!!! Click the recovery mode loop fixer the middle button! Apple techs couldn't even help me! This worked I can't believe it. BTW my itunes was up to date. Thanks for the help though brcsnl..
Similar Messages
-
I updated my iphone5 to ios 7.1.1 and i lost my notes and some contacts. How do i recover them? Please help!
No. Anything that was created after your last backup will be gone.
Use iCloud to automatically backup your device, usually once every 24 hours. -
Help updated my ipad with IOS 7.0.4. It asks me what language, chooses my wi-fi and then asks.........1 - set up as a new ipad, 2 - restore from iclouds or 3 - restore from itunes but won't restore as not enough memory! What do I do now?
I don't want to lose all my pics, songs etc
Whats my next move as I CANNOT use the ipas at the moment!!!!!!!!Your iPhone's iOS must be same or newer than the one in backups. In your case it is older so you need to update your iPhone and then recover it with backup.
-
I just recently tried to update my ipad from ios 4 to 5 and now I am getting an error message when I try to connect it to the computer so that I can download all of my apps, etc. please help! Error message says iTunes could not connect to this iPad. An unknown error occurred (oxE8000000A).
Help!Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later (free download from www.apple.com/nz/itunes/download) -
i updated my itunes to ios 6.1.3 and now i do not know how to put music on my ipod...someone help!!!
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod.... and follow the instructions. -
Hello! So I have a iPod 5th generation, and I just had a recent update, it was for iOS 6.1.3, and now for some reason, I can't get the iOS 7 update. Could anyone help me?
Apple's servers are slammed right now with iOS 7 downloads AND activation requests.
Be patient and try again later. -
I updated my iPad 4 iOS 8.0.2 and the camera does not work and hangs and unconnected, .... Please help me in this question,... Thanks in advance
You're welcome, but I didn't do anything. Try closing the camera app completely and reset your iPad and maybe that will help.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
`I was updating ipad 2 to ios 5 it downloaded and was updating and update stoped in betweend and right Now when I am restarting my Ipad 2 it is showing i tunes logo and it's also not getting detected in itunes. Please help
Hi Demo, thank you for your suggestions.
I've tried updating in the following conditions:
1. "Over The Air" at one location;
2. On a Windows computer running the latest version of iTunes at the same location;
3. On Mavericks (10.9.4) running the latest version of iTunes (11.4 (18)) at another location;
4. On Mavericks, latest iTunes over a VPN with a server location in US;
5. On Mavericks, using a 3G connection shared from an iPhone;
6. On Yosemite developer preview with a previous version of iTunes at the same location.
I got the same results in most cases except for an occasional error with code 9; I'll try again in other conditions.
Interestingly enough, I've successfully updated my devices to iOS 7.1.2 and to iOS8 GM without any issues at the same location but, of course, no two conditions are exactly the same -
I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown.
Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching for my network by name and continues to run and run without finding the network.
Prior to updating to iOs 6.3.1 my system worked perfectly.
Can anybody help please.1. Turn off router for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
just updated my iphone with iOS 7.0.2 and when I call or people call me, only one party can hear the other. Would you know how to fix this problem? Thanks
Hi Apple_Mom,
Thanks for visiting Apple Support Communities.
If you've noticed issues after updating to iOS 7.0.2, you may want to first update to iOS 7.0.3 which was recently released.
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If the behavior persists, the troubleshooting steps in this article can help:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Cheers,
Jeremy -
Updated to the new iOS 6.1.2 and now my 4S wont work for calls and texts
updated to the new iOS 6.1.2 and now my 4S wont work for calls and texts
I called Vodafone corporate help desk as I have a company phone :-
I was told to hold down the off button at the top of the handset at the same time as holding down the round menu button at the bottom of the handset for 20 seconds - the phone went off, then restarted and it all seems OK now.
Def something with the ios 6.1.2 upgrade :-(( -
how to fix itunes error 1611 while restoring ios 4.3.2 , and when i restore to 4.2.1 the can be ok.plz help me
have a look at this support article.
-
Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. I DO NOT have any back ups on itunes. Is there anyway to get out of recovery mode without restoring or recover data after a restore?
Or any other suggestions please? ThanksAs pdroth said, you should have gotten a backup made when you started the update of iOS. If you cannot find a backup, and the phone is in recovery mode, there are no futher suggestions to make. To get the phone working again you have to restore. You cannot force a backup at this time since it is already in recovery mode. It will not allow anything else but a restore at this point.
-
I just updated my 4S with iOS 8.1.1 and now my screens are not proportioned correctly - just a bit to long and wide. Is there a way to adjust? Or go back to 8.1?
lisan1234,
I am sorry to hear about the screen issues. To clarify, do you only notice the screen proportion difference when in a certain application? By to long or wide are you stating that parts of the screen images are cut off? Please provide details
LindseyT_VZW
Follow us on Twitter @VZWSupport -
I updated my iphone to iOS 6.1.2 and now my iphone calander and macbook calendar no longer sync (they used to). How do I get them to sync again?
Why can't you update?
There should be nothing preventing the update from 6.1.3 or 6.1.2 or even from 5 directly to 7.
What happens when you try to update?
Have you tried to Update through a computer running the most up top date version of iTunes?
Tell us a little more about what is happening and we may be able to provide more specific answers.
Maybe you are looking for
-
CSS VIP Issues (Source Group with 'add destination service')
I have a pair of Cisco CSS 11503 boxes with a ap-kal-pinglist applied to both virtual routers, as a Critical Service, on the Primary CSS. When a link goes down, the VRRP fails over all traffic to the Secondary, as expected, but there is an issue wit
-
WebLogic Portal and Workshop 9.2 Beta is Live!
Hello All - We're excited to announce the public availability of the WebLogic Workshop and WebLogic Portal 9.2 open Beta release on bea.com. A beta version of the electronic documentation has also been posted to e-docs. Portal 9.2 adds significant ne
-
Can't use「edit photo in photoshop」in lightroom.
I using nikon D810,and after the adjustment of my JPG file. When i clicked the 「edit in photoshop cc」, the application was coming out, but no photo was shown. Lightroom also doesn't create a new TIFF file . Please help me. I'm using Lightroom 5.6 and
-
CS 5.5. Flatten Selection Batch Command Problem
Hello, I created a command "Flatten Selection" using the History panel. It now appears on the Commands menu. However, I need to Batch apply this command to 80 icons on a layer of my image so I can flatten them individually. How can I do this? Thank Y
-
How do I re-edit a video in iMovie after I've finalized it?
Created a movie in imovie and I finalized it and put it in a usb. Now I need to go back and edit the video again but I can't find it! How can I put it back on imovie so that I can keep editing it? I have the full movie in iphoto but I need it to be i