Help - Upgraded and lost performance

I had the opportunity to upgrade my mother board from a KT4V to KT4AV. Via said that there was some increase in performance in the newer chip set. I then upgraded from PC2700 RAM to PC3200 to increase FSB speed. Lastly, I traded video cards with another machine because the other machine didn't like the Radeon 7000 driver.
Theoretically I should be able to run a faster FSB but I can't keep the machine stable past 173 MHz.  I suspect the Radeon 7000 but it's faster than a Rage 128. Any ideas? I haven't diddled the RAM settings and I didn't re-install any drivers when I swapped motherboards.  I boosted Vcore a tad but it didn't seem to help.
I see others have much higher FSB speeds with this CPU and Mo-Bo. Did I goof making these changes?

Problem solved.
I didn't realize that the motherboard read the SPD info on the memory stick and set the memory clock to 400 MHz.
Every time I over-clocked I was raising the memory clock over 400 MHz.
So I set the memory clock to 333MHz and now I can raise the FSB.
I started at 174 MHz and increased the FSB in 2 MHz steps with 6-10 hours of Prime 95 at each setting. I'm now I'm at 190 MHz and climbing. I also disabled the Spread Spectrum feature.

Similar Messages

  • Recently did an upgrade and lost all my contacts

    recently did an upgrade and lost all my contacts

    Try to check if iTunes made a backup before upgrading the phone. You can check via iTunes or use iPhone Backup Extractor. If there is, you can restore from backup to get your contacts back or simply extract them using the iPhone Backup Extractor. It's worth a try, good luck!

  • Tried to do upgrade and lost everything but contacts. Phone wont sync with computer. Do I need to register it as a new iphone?

    Tried to do upgrade and lost everything but contacts. Phone wont sync with computer. Do I need to register it as a new iphone?

    You should copy everything from your old computer to your new one, then sync.
    The iphone will sync with one computer at a time.  Syncing to another will indeed erase the current content and replace with content from the new computer.

  • Wasn't given option to "upgrade" and lost user data

    I was trying to upgrade from 10.2.9 to 10.3 yesterday and during the install I didn't see an option to "upgrade" or save the data that was already on the computer (iMac G3). After the install I see that there are no users except the account I was asked to create during the install. So I guess it did a clean install and deleted all the data from the drive? But then I notice that the trash has files in it from before the install. Nothing I'm looking for, but that tells me that some things didn't get removed altogether.
    So I'm wondering if there is a way for me to recover the users data that was on here before I did the install.
    Any help would be GREATLY appreciated. : )
    Thanks a lot,
    -Garner

    If you are upgrading to 10.3 from a previous major version the Upgrade option is usually the default. If you simply clicked along the upgrade install is performed (unless there is some problem.) Are you sure the user accounts have been deleted? Are you sure you didn't do an Archive and Install? If so, check in the root directory of the hard drive for a Previous System Folder.

  • I did an upgrade and lost all of my music. i had most of the songs (1400) on an external hard drive. how do i put these songs in my itunes library.? i was able to get them on my ipod some how but i cant play from just the itunes

    i recently did an up grade on my ipod touch  and lost all of my music (1700 songs). all of my music wason my ipod. i have an external hard drive with most of my songs (1400 songs) on it.  through playing around and just trying to fiquire it out, i managed to get the music from the external hard drive to my ipod touch. the problem that i just found out is that i cant play those songs from my computer unless my iopd is connected to the computer. when i try to play a song, it gives me thiserror message " THIS SONG CAN NOT BE USED BECAUSE THE ORIGINAL FILE COULD NOT BE FOUND. WOULD YOU LIKE TO LOCATE IT. please help.what did i do wrong?

    To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
    Delete the "songs" that do not play in your iTunes library and reimport them.

  • I upgraded and lost a lot of data ...where can I recover it?

    I have an imac 27 inch 2009 just upgraded to 10.7.4 and lost mail data and downloads.
    Can anyone tell me how to recover my lost files?
    Thanks
    Dorothy

    Do you have a hard drive that's not filevaulted and desperate enough to spend hours and a couple of hundred of dollars in a data recovery effort?
    Or could you redownload the files that were in the Downloads folder (and shouldn't have remained in there as it's for temporary downloads only) and perhaps do without your soon to be old emails?
    Create a data recovery, undelete boot drive

  • Never synced before just upgraded and lost everything

    Hi,
    I tried upgrade my friend's phone on the another person's computer.
    Successed.. Upgrading but I lost all contects and photos. I tried to back up and restore but i couldn't.
    The phone i upgraded never synced before.
    Is there anyway i can have photos and contacts back? Plz help me

    This does not happen without ample warning. The first warning provided is the iPhone is associated with another iTunes library. This must be followed by manually selecting Sync Music under the Music tab or Sync Apps under the Apps tab for the iPhone sync preferences with iTunes on another computer and when doing so, a warning is provided indicating that doing so will erase all iTunes content on the iPhone first. This involves iTunes content on the iPhone only - everything on the iPhone is not erased with doing so.
    Unless Sync Photos is selected under the Photos tab for the iPhone sync preferences with iTunes on another computer along with selecting photos on the computer's hard drive to be transferred to the iPhone followed by a sync, photos transferred from the computer the iPhone is normally synced with are not erased from the iPhone, nor are any photos/videos in the iPhone's Camera Roll, which are not included with the iTunes sync process.
    Unless Sync Contacts is selected under the Info tab for the iPhone sync preferences with iTunes on another computer and a supported address book application on the computer is selected, contacts on the iPhone are not touched. The same for Safari bookmarks and calendar events.
    The iPhone's backup does not include any iTunes content - no music, movies, tv shows, podcasts, or 3rd party apps, and the backup does not include any photos transferred from your computer. All iTunes content on the iPhone should be in your iTunes library on your computer - the computer the iPhone is normally synced with. All photos transferred from the computer the iPhone is normally synced with should remain on that computer as well.
    Where is your husband's computer? Forget about his sister's computer. He needs his computer to restore all content on his iPhone as it was before.

  • Upgraded and lost music library except for purchased songs

    I followed the upgrade prompt, and it wiped out my entire music library and playlists except for those songs I had purchased on I-tunes. The hundreds I downloaded from my own purchased CDs are gone. Help!

    I had this happen to me a year ago when I upgraded from an older version. I was saddened when I lost all of my library. I then tried to install the older version that I still had in my recycle bin, and then by some miracle I got back my whole library. To this day I do not know what I did to restore it as I don't understand this process very well. But one thing I do know I will not upgrade. I still have iTunes 6.0 and will keep it. BUT I have another post out there because I can not burn a disk of one of my files. I keep getting the message "iTunes has to close now ...sorry for the inconvience etc." I need an answer to that question. Hopefully someone will be able to help me.

  • My Blackberry Tablet was forced to upgrade and lost everythin

    Has this happened to anyone?
    I have been using the Blackberry Playbook for 3 months now and have setup everything and synced it to the desktop before. Just recently, I plugged it into the computer to sync pictures and such but it could not connect but asked to upgrade (note, a few weeks ago I had already updated the OS). After the update, it reset and asked to setup the Playbook as if I had just bought it. After setting it up again all of my videos, pictures, music, contacts, and applications were gone!! There seems to be no way for me to recover.
    Also, I made sure that the Playbook did not shut down or get disconnected from the computer or the network while the upgrade was in progress.
    I don't think that I will continue to use the Playbook at the risk of losing everything again. I had my baby's first crawl and many other important memories on there.
    Solved!
    Go to Solution.

    Knottyrope - My problem was:  I WAS trying to back up the playbook!  It gave me an "backup error" message and when I followed the instructions (although the PB was already turned off I simply turned it back on) it automatically updated without any message indicating it would do so.
    My complaint is that I had no warning of any sort - it did not advise me that if I continued it would update and I could possibly lose files.  I have had a warning like this on many other programs but not this time for my PB.  I would have not continued and would have cancelled the update. 
    I would have sought out a professional to get my pictures off before proceeding with any kind of an update.  As it is, I am probably going to seek the help of a company in the US (I'm in Canada - right in the city RIM is) to see if they can restore anything; that's how important these pictures are to me.
    If we had proceeded after being warned I would say you have the right to tell us we're pathetic.  But I'm sorry - I think we have every right to complain about how this updated.  I still can't believe something so simple went unchecked by a major company such as RIM.

  • In an effort to try to do a slide show through my apple TV and my computer I have lost all of my work in iPhono for the past 5 years. I upgraded and lost my albums and books. How do I get everything back the way it was?

    In an effort to try and show a slide show through my apple tv I upgraded my iPhoto app now I have lost all of my books albums and photo's over the last 5 years. How can I get it back the way it was 2 hours ago?

    to know your version of OS, click on the apple, then  " About This Mac".
    Same thing for your version of iPhoto: in iPhoto, click on "iPhoto" then "About iPhoto".

  • 8.1 upgrade and lost wireless print from apps

    system kept telling me to upgrade to 8.1 on my 1 year old amd hp so i did but did not have a system restore scedual and did not make a restore disk (stupid me ). i am not pleased with all the changes made but i could make due except i can no longer print to my wireless hp photosmart 5225 printer. i have uninstalled and reinstalled and in hp print dr it ffails first test but works on  second so it says there is a software problem to uninstall and reinstall . i'm lost

    Welcome to the HP Forums jdhs69,
    I see by your post that you aren't able to print wirelessly since upgrading to Windows 8.1.
    I can help you with this issue.
    Is this the Photosmart 5525? How Do I Find My Model Number or Product Number?
    Print a configuration page to get the printer's IP address.
    Printing a Network Configuration Page.
    If you have a valid IP address for the printer then try and access the Embedded Web Server for the printer.
    Type the IP address into your web browser's address bar. (Internet Explorer)
    If it loads the printer's network page then the printer is on the network.
    Power cycle the  router, computer and printer.
    Try printing again.
    If you are still unable to print, then run the add printer wizard.
    From the start up screen, (tiles menu) type in "Devices and Printers", select settings, click on Devices and Printer,
    click on add a printer.
    Test the printer.
    If the issue persists then uninstall the printer software. Uninstalling the Printer Software.
    I would disable all the start up programs and temporarily turn off the Antivirus Software to see if that is causing the issue. How To Change Windows 8′s Startup Programs. Click on the start up tab disable all the programs running.
    Then download and run the HP Printer Install Wizard for Windows.
    Test the printer.
    Then you will need to go back in and enable the start up programs and turn the Antivirus Software back on again.
    Please provide in detail the results if you are still having issues.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Snow Leopard upgrade and lost my itunes library

    I'm hoping someone can help.
    I recently upgraded to Snow Leopard and when I went to play music, I noticed my library and all ipod apps were gone.  When I look in finder.....I see it in different folders. It's there somewhere.  So, how do I get it all back?
    I'm hoping someone can help.
    Susy

    If you backed it up, then use your backup copy to put it back.

  • Upgraded and lost store

    ever since i installed new itunes 8 upgrade i cannot access store. any suggestions? have uninstalled and than reinstalled but no go. help please.

    Along these same lines. I cannot connect to the store. When I do a diagnostic through itunes it says "secure link to itunes failed" and then gives me the following to try: 1. Click start and choose Run
    2. Type CMD and click Okay
    3. After the DOS prompt type: ipconfig /flushdns and press ENTER(make sure you leave a single space after "ipconfig")
    I have tried this several times and it does not work. Does anyone have suggestions?

  • Upgraded and lost a previous movie i had in library want it back

    how do i retrieve a movie lost during latest upgrade can find it in purchase history but don't have it in my library

    Sorry about that happening - has happened to me quite often, too.
    Not going to help you now, but I use this extension to automatically "cache" the content of text areas for situations where that may happen.
    https://addons.mozilla.org/en-US/firefox/addon/textarea-cache/
    The only problem with it is, it save only the latest "state" - no backups beyond what is saved. If something in another tab causes Firefox to crash, you may lose the most recent text that you typed when Firefox was getting ready to crash.

  • Upgraded and lost iPhoto!

    I upgraded my Macbook to OS X 10.9.2 and now I can't open iPhoto!  Can anyone help?

    What happens? Waht versiono of iPhoto do you currently have?
    LN

Maybe you are looking for

  • Reducing the file size of an XML Form

    We have created and launched a number of PDF Forms (created in LiveCycle) for our contacts to download, complete electronically, and email or fax back to us. The problem we are running into is that our email client allows us to only receive files tha

  • A Question About Volume

    I've been staying up late for a few weeks finishing up 8 songs that I've composed that I'm going to burn to CD's for Christmas gifts for the family (they'll be my captive audience...now, they'll HAVE to listen to my songs). Presently, they sound fant

  • Message Flow in Integration Engine

    Dear Friends, Kindly can someody share  how the message is flowing in Intergration engine after the message taken from Adapter engine. If you have any block diagram it will be helpful for me

  • Remove RAW from Library

    I've edited the RAW images I've imported and backed them up on Disk, now I'd like to remove the RAW files leaving the edited JPGs. Is there any way to do this with out deleting all the images (RAW and jpg edits) then reimporting the jpg images? I alr

  • How do I get the stupid map off my pictures

    I really do not want my pictures to have a map attached and no setting will remove it!