Help- Urgent Problem

Hi.  I have a problem I'm hoping someone can help with.
I purchased an Airport Extreme 802.11n to use in my business.  I hoped to use this with 5 wired PC (using 2 ports on the back of the Airport for 2 computers and add 3 ports using a Linksys switch plugged into the 3rd Airport outlet) and Macbook (using wireless connection).  Before this week, we have had a successful network using Linksys Router with 4 ports- using 5 wired computers (I had to use a switch to get extra outlets).  I unplugged the old system when I got the Airport Extreme & Macbook--and installed the Airport Extreme.  I was able to get the Macbook online and a couple of the PC online too, but the ability to access our Point of Sale software using different computers is gone.  Can someone help me figure out how to establish the setup using 5 PCs and 1 wireless notebook?  I've tried Apple Support & they have helped, but we are still unconnected.
Thanks,
KTH
Message was edited by: KTH1967

hi ali,
that is what i am trying to show you in that table 23-4 of the link: :http://www.cisco.com/univercd/cc/td/doc/cisintwk/itg_v1/tr1923.htm#xtocid44
just read it you will have clear idea of different mode
rate this post if it helps
regards
Devang

Similar Messages

Need help urgently,problem going on for 3 years

I have had broadband issues for 3 years,in total 7 engineer visists,100s of calls etc and lots of promises and lies from international call centres.
The BT offered to sell me a 2nd line into my property,this seemed like one solution,until,that has now had 3 engineers visits,the last one yesterday,where the engineer was working on the new line,packed up and went without telling me he was going,or that he still couldnt do the work.
I am now under meds from my doctor due to this issue,and I have gone in desperation to the BBC watchdog programme and ofcom for help.
I simply do not know what to do next,please could someone advise me,I am at my wits end and this is causing problems within my home and family.
Thanks

Hi,
Welcome to BT Retail's Community Forum. This is a customer to customer forum.
What colour is the broadband light on the homehub? Do you have any connectivity at all?
Please see Keith's help guide here: Helping forum members to help you, it will go through some checks that are needed for us to help you.
A summary of the checks are:
1) Are you connected by master or test socket?.
2) Can you please run a BT speed test (including IP Profile) http://speedtester.bt.com (not beta version)[Best done with a wired, ethernet, connection]
3) is there any noise on your line. dial 17070 option2 from landline. should be silent but slight hum normal on cordless phone.
4) please post adsl line statistics
ADSL Line Statistic Help:
If you have a BT Home Hub like the one below...
Then:
1) Go to http://192.168.1.254 or http://bthomehub.home
2) click Settings
3) Click Advanced Settings
4) Click Broadband
5) Click Connection or sometimes called ADSL (see picture Below)
The direct Address is http://bthomehub.home/index.cgi?active_page=9116 (for bthomehub3)
You will need to copy and past all the adsl line statistics ( Including HEC, CRC and FEC errors). You may need to click " More Details"
There are more useful links on Keith's website here: If you have an ADSL connection, please select this link
cheers
I'm no expert, so please correct me if I'm wrong

[Help: Urgent] problems with accessing /console after apparent successful install of Portal server SP3.0sp3a

Hi,
HW: Sun Solaris 2.8
I would really appreciate it you can cc: me if you can shed any light
as
to whats going wrong, and what I should do to fix the following
problem.
Portal server doesn't allow one to access /console (or /login) -
0 length document is returned.
We find the following in the enterprise server error log, when we
attempt
to access portal console (URI: http://....:8080/console)
1) Installed SP3.0sp3a as Open Portal, i.e without the gateway and
without
SSL enabled.
2) Our Unix users are served using YP
***From the server access logs : ***
- - [16/Nov/2001:15:12:40 -0800] "GET /login HTTP/1.0" 503 0
***From the server error logs : ***
[16/Nov/2001:14:11:27] info ( 4639): successful server startup
[16/Nov/2001:14:11:27] info ( 4639): iPlanet-WebServer-Enterprise/4.1SP7
BB1-04/05
/2001 18:30
[16/Nov/2001:14:11:28] info ( 4639): Loading Simple Session Manager by
default. Sp
ecify MMapSessionManager in servlets.properties to load persistent
session manager
[16/Nov/2001:14:11:28] info ( 4639): SimpleSessionManager: Default
values for maxi
mum number of sessions is 1000 with a time out value of 1800 seconds
[16/Nov/2001:14:11:28] info ( 4639): SimpleSessionManager: Maximum
number of sessi
ons (1000) with a time out value of (1800) seconds
[16/Nov/2001:14:12:40] info ( 4639): Internal Info: loading servlet
login
[16/Nov/2001:14:12:41] info ( 4639): Internal Info: loading servlet
pllservice
[16/Nov/2001:14:12:41] info ( 4639): pllservice: init
[16/Nov/2001:14:12:42] failure ( 4639): Internal error: exception thrown
from the
servlet service function (uri=/login): java.lang.NullPointerException,
stack: java
..lang.NullPointerException
at
com.iplanet.portalserver.auth.service.AuthD.printProfileAttrs(Compiled
Code)
at
com.iplanet.portalserver.auth.service.AuthD.<init>(AuthD.java:160)
at
com.iplanet.portalserver.auth.service.AuthD.getAuth(AuthD.java:171)
at
com.iplanet.portalserver.auth.service.LoginServlet.doGetPost(Compiled C
ode)
at
com.iplanet.portalserver.auth.service.LoginServlet.doGet(LoginServlet.j
ava:990)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:701)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
at
com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunne
r.java:507)
, root cause:
Many thanks for your responses on this.
Tarang Kumar Patel. WWW home:http://ic-www.arc.nasa.gov/ic/
NASA Ames Research Center, MS 269-2, Moffett Field, CA 94035-1000
Email: [email protected], Tel:(650) 604-4721 fax: (650) 604
3594
Stated views are my own IDEA, as I'm another I.D.E.A man "I Didn't
Explain All"

Just one more thing:
I made the following setting in platform.conf
ips.debug=on
Now, the trace I see on the STDOUT/STDERR stream reveals :
Received RequestSet XML : <?xml version="1.0" standalone="yes"?>
<RequestSet vers="1.0" svcid="profile" reqid="2">
<Request sid="qxcuekwwdrcfwubmmwuip82764q94o37r67n@[email protected]@8080@z
repvc"><![CDATA[<ProfileService ver="1.0" reqid="0"><GetProfile searchFlag="false"
admin="false"><Profile profileName="mercip/authentication" profileType="9"><Priv p
rivName="iwtSession-addSessionListenerOnAllSessions"/></Profile></GetProfile></Prof
ileService>]]></Request>
</RequestSet>
---->NEED TO FILL APPSHASH -----
getProfile.walktree
321^iwtSession-addSessionListenerOnAllSessions-pv
com.iplanet.portalserver.profile.service.ProfileServiceException: 321^iwtSession-ad
dSessionListenerOnAllSessions-pv
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Exception.java:42)
at com.iplanet.portalserver.profile.service.ProfileServiceException.<init>(
ProfileServiceException.java:47)
at com.iplanet.portalserver.profile.service.ProfileService.walkTree(Compile
d Code)
at com.iplanet.portalserver.profile.service.ProfileService.getProfile(Compi
led Code)
at com.iplanet.portalserver.profile.service.ProfileService.processProfileRe
quest(ProfileService.java:134)
at com.iplanet.portalserver.profile.service.ProfileService.processRequest(P
rofileService.java:123)
at com.iplanet.portalserver.profile.service.ProfileService.process(Compiled
Code)
at com.iplanet.portalserver.pll.server.PLLRequestServlet.handleRequest(PLLR
equestServlet.java:139)
at com.iplanet.portalserver.pll.server.PLLRequestServlet.doPost(Compiled Co
de)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:733)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
at com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunner
.java:507)
ProfileResponse: exception key:321
ProfileResponse: exception string:iwtSession-addSessionListenerOnAllSessions-pv
ProfileResponse.toXMLString:method id is 0
Sent ResponseSet XML : <?xml version="1.0" standalone="yes"?>
<ResponseSet vers="1.0" svcid="profile" reqid="2">
<Response><![CDATA[<ProfileService vers="1.0" reqid="0"><Exception>321^iwtSession-a
ddSessionListenerOnAllSessions-pv</Exception></ProfileService>]]></Response>
</ResponseSet>
ProfileResponse: exception key:321
ProfileResponse: exception string:iwtSession-addSessionListenerOnAllSessions-pv
ProfileUtils.getProfileResponse: Response content <ProfileService vers="1.0" reqid=
"0"><Exception>321^iwtSession-addSessionListenerOnAllSessions-pv</Exception></Profi
leService>
Profile Error:
Invalid attribute or privilege name
com.iplanet.portalserver.session.SessionException: Invalid attribute or privilege n
ame
at java.lang.Throwable.fillInStackTrace(Native Method)
at com.iplanet.portalserver.session.SessionException.<init>(SessionExceptio
n.java:30)
at com.iplanet.portalserver.session.Session.addSessionListenerOnAllSessions
(Session.java:642)
at com.iplanet.portalserver.session.Session.addSessionListenerOnAllSessions
(Session.java:502)
at com.iplanet.portalserver.auth.service.AuthD.<init>(AuthD.java:112)
at com.iplanet.portalserver.auth.service.AuthD.getAuth(AuthD.java:171)
at com.iplanet.portalserver.auth.service.LoginServlet.doGetPost(Compiled Co
de)
at com.iplanet.portalserver.auth.service.LoginServlet.doGet(LoginServlet.ja
va:990)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:701)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
at com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunner
.java:507)
Authd Profile Attributes
cookieDomains
cookieName->iPlanetPortalServer
authHost:authPort->........:8080
authProto->http
authHostIP->.....
authHostURL->http://.......:8080/login/default
Lets hope this helps

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699

Help neede urgently(Problem in adding exponential numbers)

Hi,
Actually i want to add the contents of two files which contains exponential numbers.
i'm not able to add these numbers. Can any one help me?
import java.io.*;
import java.nio.*;
class userFile
     public static void main(String[] args) throws IOException
          try
               BufferedReader br=new BufferedReader(new InputStreamReader(System.in));
          String s1,s2,s3;
          FileReader fr1,fr2;
          System.out.println("Enter first file :");
          s1=br.readLine();
          System.out.println("Enter second file :");
          s2=br.readLine();
          System.out.println("Enter new file :");
          s3=br.readLine();
          fr1= new FileReader(s1);
          fr2= new FileReader(s2);
          BufferedReader fin1=new BufferedReader(fr1);
          BufferedReader fin2=new BufferedReader(fr2);
          String str1,str2,str3;
          double i1,i2,i3;
          OutputStream fout=new FileOutputStream(s3);
          while((str1=fin1.readLine()) != null)
               while((str2=fin2.readLine()) != null)
               i1=Float.parseFloat(str1);
               System.out.println(i1);
               i2=Float.parseFloat(str2);
               System.out.println(i2);
               i3=i1+i2;
               System.out.println("i3=" +i3);
               str3 = Float.toString(i3);
               byte buf[]=str3.getBytes();
               fout.write(buf);
               fout.write('\n');
          catch(NumberFormatException e)
               System.out.println(e);
}I need help urgently.
Thanks in advance.

By "exponential number, do you mean one in scientific notation (eg. -1.55743e21) or what?
What do your files look like?
What problem are you encountering? Is an exception being thrown? If so, give us the exact message (copy/paste). Is the results simply not what was expected? If so, give us the input, the expected results and the actual results for us to compare and consider.
Chuck

Help urgently needed: bizarre problem - no audio in imported clip!

Hey there!
I have a bizarre - never the less urgent problem:
When I import some material (presentations) which I have recorded on Mini DV with my Canon MVX10i Camcorder the following problem occurs:
There is one particular presentation which somehow looses the audio during the import process!
That means the imported clip has no audio even though the audfio is on tape! Other clips before and after do not have this problem - the audio is available after the import.
A bizarre but serious problem for me. Any suggestions?
Thanks a lot in advance
Thorge

I had a similar problem. When I started the tape from the beginning no audio would import. To solve it I started the tape a few seconds in and It seemed to work.
Hope this helps.

Starting tomcat problem, please help urgent

I installed jwsdp on windowsXP . The log file gives this following error when i try to start tomcat:
java.util.zip.ZipException: Access is denied
     at java.util.zip.ZipFile.open(Native Method)
     at java.util.zip.ZipFile.<init>(ZipFile.java:127)
     at java.util.jar.JarFile.<init>(JarFile.java:138)
     at java.util.jar.JarFile.<init>(JarFile.java:80)
     at org.apache.catalina.loader.StandardClassLoader.addRepositoryInternal(StandardClassLoader.java:1081)
     at org.apache.catalina.loader.StandardClassLoader.<init>(StandardClassLoader.java:200)
     at org.apache.catalina.startup.ClassLoaderFactory.createClassLoader(ClassLoaderFactory.java:202)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:141)
     at java.lang.reflect.Method.invoke(Native Method)
     at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Bootstrap: Class loader creation threw exception
java.lang.IllegalArgumentException: addRepositoryInternal: java.util.zip.ZipException: Access is denied
     at org.apache.catalina.loader.StandardClassLoader.addRepositoryInternal(StandardClassLoader.java:1109)
     at org.apache.catalina.loader.StandardClassLoader.<init>(StandardClassLoader.java:200)
     at org.apache.catalina.startup.ClassLoaderFactory.createClassLoader(ClassLoaderFactory.java:202)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:141)
     at java.lang.reflect.Method.invoke(Native Method)
     at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
PLEASE HELP ,URGENTLY NEEDED TO SHOW SOME WORK ON THIS.
THANKS
jim

Hi,
I have a similar problem, i try to deploy a JAR file built on AIX 5.2 platform (jvm 14.1) into Tomcat 5.5.7 running on Windows platform when i try start Tomcat it's fail with the fellowing message
SEVERE: Error deploying web application directory usi
java.lang.IllegalArgumentException
     at java.util.zip.ZipInputStream.getUTF8String(ZipInputStream.java:299)
     at java.util.zip.ZipInputStream.readLOC(ZipInputStream.java:238)
     at java.util.zip.ZipInputStream.getNextEntry(ZipInputStream.java:73)
     at java.util.jar.JarInputStream.<init>(JarInputStream.java:58)
     at java.util.jar.JarInputStream.<init>(JarInputStream.java:43)
     at org.apache.catalina.util.ExtensionValidator.getManifest(ExtensionValidator.java:368)
     at org.apache.catalina.util.ExtensionValidator.validateApplication(ExtensionValidator.java:187)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:3942)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
     at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:909)
     at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:872)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:474)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1106)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:310)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1019)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1011)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:440)
     at org.apache.catalina.core.StandardService.start(StandardService.java:450)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:683)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:537)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:271)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:409)

[Urgent] Problem with Itunes 9.2 on Vista 64-bit

Hello,
I have an urgent problem that I hope to get some response and insight from anybody, desperately needing help. As some might know, the new OS for iphone and ipod touch is out. iOs 4 and I wanted to upgrade my itunes, but i had to upgrade it to the itunes 9.2 version. As i was upgrading and installing, this error message : "There is a problem with this Windows Installer package A problem required for the install to complete could not be run. Contact your support personnel or package vendor" came up and ruined the installation and as of now, I am unable to open my Itunes and sync stuff in. This is urgent as I have a ton of stuff inside and now i cant use itunes ! please help !
Im on a version of Windows Vista SP 2 64-bit OS, if that's any info tht will help ! Any help is greatly appreciated here (:

any fixes ? ):

Urgent: Problems in Generic Extraction by Function Module

Hi BW Gurus,
I am new to SDN and also new to generic extraction using function module. My requirement is to extract long text(142 char) from CRM to BW as the text is not stored in database table I used function module read_text with in another ZXXX function module copy of (RSAX_BIW_GET_DATA_SIMPLE). In my extract structure I used GUID(char,32), Langu, long text(142 char) and 2 placeholders. Text can be extracted by passing STXH table fields(Tdname, Tdid, Tdobject, Tdspars) to read_text as parameters and i also need to use CRMD_ORDERADM_H field GUID(32 char) to compare 1st 32 chars of tdname(70 char) with Guid to select Guids and loop thru this Guids and for each Guid i need to append lines of text to e_t_data but as i donot know ABAP i unable to write the code for this. Through my friends help i wrote code when i check in RSA3 it is displaying the text but when i replicate into BW and load into data target in monitor the status is red with records initially but afterwards it will be red status again with 0 from 0 records for initial load again.when i check on job logs the errors i have are:
The background job has created a job log file of 2Gb size and it is currently on a infinite loop writing entries into the SAP System Log that it cannot write to the Job log file due to Error 22 for write/read access to a file this is because of the datasource i have created. Please find my Function module and if anyone would please correct FM and send me that will be really great.I appreciate it in advance.
MY Function Module is:
FUNCTION Z_CRMORDERH_STR_TXT.
""Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE YCRM_TEXT_STR OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
***" EXCEPTIONS     NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
Tables: CRMD_ORDERADM_H, STXH.
Auxiliary Selection criteria structure
data: l_s_select type srsc_s_select.
Maximum number of lines for DB table
Statics: s_s_if type srsc_s_if_simple,
counter
         s_counter_datapakid like sy-tabix,
Cursor
         s_cursor type cursor.
data: i_crmtext type standard table of TLINE .
types: begin of xsreph ,
          GUID type CRMD_ORDERADM_H-guid,
        end of xsreph.
   data: i_guid type standard table of xsreph.
data: I_TEXT type STXH-TDNAME.
data: xempl like YCRM_TEXT_STR occurs 0 with header line.
data: t_tab like dd03l-tabname.
Select ranges
ranges: l_r_guid for CRMD_ORDERADM_H-guid.
         l_r_connid for sflight-connid.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
if i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
Check DataSource validity
    case i_dsource.
      when 'yCRM_TEXT'. " for S_SREPH1
      when others.
        if 1 = 2. message e009(r3). endif.
this is a typical log call. Please write every error message like this
        log_write 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                i_dsource   "message variable 1
                  ' '.                 "message variable 2
        raise error_passed_to_mess_handler.
    endcase.
   append lines of i_t_select to s_s_if-t_select.
Fill parameter buffer for data extraction calls
    s_s_if-requnr    = i_requnr.
    s_s_if-dsource = i_dsource.
    s_s_if-maxsize   = i_maxsize.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
   append lines of i_t_fields to s_s_if-t_fields.
we will do our selection based on what is in the p table for the
infoobject
else.                 "Initialization mode or data extraction ?
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    if s_counter_datapakid = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
    LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GUID'.
        MOVE-CORRESPONDING L_S_SELECT TO L_R_GUID.
        APPEND L_R_GUID.
      ENDLOOP.
      case i_dsource.
        when 'YCRM_TEXT'. " for S_SREPH1
          t_tab = 'CRMD_ORDERADM_H'.
      endcase.
      select GUID
      from (t_tab)
      into table i_guid where   PROCESS_TYPE = 'ZACI' and ( OBJECT_ID < '0000000042').
     select tdname from stxh into i_text where tdobject = 'TEXT'.
     if sy-subrc ne 0.
       message e009(r3).
this is a typical log call. Please write every error message like this
       log_write 'E'                  "message type
                 'R3'                 "message class
                 '009'                "message number
                 i_dsource   "message variable 1
                 'No master data found'.           "message variable 2
       raise error_passed_to_mess_handler.
     endif.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
     open cursor with hold s_cursor for
     select (s_s_if-t_fields) from CRMD_ORDERADM_H
                              where GUID in L_R_GUID .
                               ENDIF.
Fetch records into interface table.
named E_T_'Name of extract structure'.
   fetch next cursor s_cursor
              appending corresponding fields
              of table e_t_data
              package size s_s_if-maxsize.
    IF SY-SUBRC <> 0.
     CLOSE CURSOR S_CURSOR.
     RAISE NO_MORE_DATA.
   ENDIF.
as we are doing this only once can use the select statement.
***data: crmtext like tline occurs 0 with header line.
**data: i_crmtext type standard table of TLINE.
**data: i_guid type standard table of xsreph.
data: l_guid type THEAD-TDNAME.
data: st_guid type xsreph.
data: st_crmtext type TLINE.
data: lan type THEAD-TDSPRAS.
lan = 'E'.
loop at i_guid into st_guid.
l_guid = st_guid-guid.
CALL FUNCTION 'READ_TEXT'
   EXPORTING
   CLIENT                        = SY-MANDT
     ID                            = 'A002'
     LANGUAGE                      = lan
     NAME                          = l_guid
     OBJECT                        = 'CRM_ORDERH'
   ARCHIVE_HANDLE                = 0
   LOCAL_CAT                     = ' '
IMPORTING
   HEADER                        =
   TABLES
     LINES                         = i_crmtext.
EXCEPTIONS
   ID                            = 1
   LANGUAGE                      = 2
   NAME                          = 3
   NOT_FOUND                     = 4
   OBJECT                        = 5
   REFERENCE_CHECK               = 6
   WRONG_ACCESS_TO_ARCHIVE       = 7
   OTHERS                        = 8
e_t_data-guid = l_guid.
loop at i_crmtext into st_crmtext.
move lan to e_t_data-langu.
move st_crmtext-tdline to e_t_data-description.
append e_t_data.
endif.
endloop.
clear: st_guid,l_guid.
refresh: i_crmtext.
endloop.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
endif.
ENDFUNCTION.
please Gurus as I donot know ABAP i appreciate if anyone would write a FM based on requirement and send me that will be really great this is my request. I gurantee of award points for good answers.
Regards
Kishore

Hi,
The statement <b>RAISE NO_MORE_DATA</b> should be active (uncommented) in your code. Otherwise, the infinte loop occurs.
See also, the Siggi's blog:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
BTW, was it your thread here:
Re: Urgent: problems in extracting Long Text
Best regards,
Eugene

Urgent problems with image viewing on my 20 inch Cinema display???

I have a very urgent problem concerning my Apple Cinema 20 inch Display and my SpyderPro2 on my Mac Pro Intel Dual Core Xeon 2x 2.66GHz.
I have been using the Spyder for some years now, but recently I have been having big problems with the results.
I have a major contract with a jewellery company in London, where I clean up digital photos. Images that I have lightened up to look great on my Cinema Display have been reported by my client to look pretty dark on their PC's in their offices.
Some of these images show lines and grubby patches??? To check this I opened files in Photoshop and moved the levels 'black' slider down quite some way, and did see evidence of what the client could see at their end? It seems that when I have used a faded eraser brush it leaves a light patch in between the shadows of the jewellery. This shouldn't be visible to the naked eye though?
I must point out that when I use the eyedropper tool on images, to read the amount of grey or colour in the white areas around the peices, I am shown values of 1,2 or 4 maximum in the CMYK values. 4 percent out of 100 is nothing and should not be visible to the naked eye?
How is it that my clients PC's can see dark shadows and where my eraser brush has rubbed out???
I have tried many re-calibrations and also tested all of my older calibrations dating back a few years. I have also tested the same faulty images on Intel iMac's, an eMac, and a few PC's. On the iMac's I can just about make out the artefacts that my client can see, but nothing that I would deem as unacceptable.
I am at a loss as to the fault, but It may be the Spyder2 Pro's inability to calibrate my Apple Cinema display properly? I may lose my contract which I cannot afford to do, and I simply have to find the cause ASAP.
I have my Mac's in my office apartment next to two bay windows. I have vertical blinds there. When calibrating I have always turned off all the lights and pulled the blinds right back so that only the light from the two large window doors is coming in.
For graphic design the calibrations seemed to be okay for quite some time, but recently it is getting harder to achieve good results with the Spyder? This could affect all of my workflow which is very serious. But I must stress that overall the Spyder results are not terrible. I can see good colours and dark levels and in general across all of my calibrated profiles, the jewellery looks acceptable on my Cinema Display?
I did say to my clients that they should calibrate their PC screen properly but their offices have many Screens and they all show the same artefacts (some much worse than others)? I know that PC Screens are darker than Mac's but a 4% grey should not be visible????
As these are a web company the images will be seen by PC users around the world and most of these will have no calibration on their screens. What can be done to prevent this and what is the cause of this? I can't possible please everyone, but as a creative professional I have to be 100% certain that my workflow is at its best.
I need urgent help to solve this or loose valuable business? I hope that you are able to help solve this mystery.
I have just purchased the new Spyder3 Pro which I hope will give perfect results but I have to find out what the cause of this is. If some of the fault lies with the client, I can charge these for all the testing and calibrating I have done.
Kind regards,
Jason Conway
ideo-sync - inspired design.

One thing you might want to try adjusting is the gamma setting in Displays Preferences color calibration area. Macs typically are set at 1.8 but PCs will often use 2.2. That could account for the difference.

CSS Layout issue!! Help Urgent!!

I am having a problem with creating a css layout, in the past i used tables and am trying to convert my sites for my customers. I have layed out the website using divs and css and it looks great until i put in the cosing of the menu bar. when i put in the coding for the menu bar suddenly the bar has a padding around it but i cannot find a padding that would change this in the css coding. I need this done asap! so please help. ill show my coding below:
this is the div coding:
<div id=Nav>
   <ul class="dropdown" id="Bar"; width: 879px" name="Bar">
         <li class="style16" style="width: 161px; height: 22px">
   <a href="default.html" style="width: 146px">Home</a></li>
         <li class="style10" style="width: 169px; height: 23px">
   <a href="about.html" style="width: 153px">About</a></li>
     <li class="" style="height: 31px; width: 175px; left: 0px; top: 0px">
   <a href="Equipment.html" class="style18">
   <div class="style10" style="width: 156px; height: 20px;">
    Equipment</div>
   </a> <ul class="sub_menu">
            <li><a href="compressor.html">Air Compressors</a></li>
            <li><a href="compactions.html">Compaction</a></li>
            <li><a href="concrete.html">Concrete Equipment</a></li>
            <li><a href="forklifts.html">Fork Lifts</a></li>
            <li><a href="generators.html">Generators</a></li>
            <li><a href="groundthawing.html">Ground Thawing</a></li>
            <li><a href="heaters.html">Heaters</a></li>
            <li><a href="scissorlifts.html">Scissor Lifts</a></li>
            <li><a href="boomlifts.html">Boom Lifts</a></li>
            <li><a href="lighttowes.html">Light Towers</a></li>
            <li><a href="misc.html">Misc.</a></li>
            <li><a href="dirtequipment.html">Dirt Equipment</a></li>
            <li><a href="powertools.html">Power Tools</a></li>
            <li><a href="pumps.html">Pumps | Saws | Welders</a></li>
                 </ul>
         </li>
         <li style="width: 165px"><a href="locations.html">
   <div class="style10" style="width: 154px">
    Locations</div>
   </a>
           </li>
             <li style="width: 180px"><a href="contact.html">
   <div class="style16" style="height: 24px">
    Contact Us</div>
   </a>         </li>
        </ul>
</div>
This is the css coding:
#wrapper {
width: 880px;
margin-right: auto;
margin-left: auto;
background-color: #f4f4f4;
#Navigation {
background-image: url(Images/NAvigation%20BAr.jpg);
background-repeat: no-repeat;
width: 880px;
visibility: visible;
height: 3-px;
vertical-align: top;
Nav {
vertical-align: top;
margin: 0px;
padding: 0px;
clear: both;
height: 20px !important;
#wrapper1 {
width: 876px;
margin-right: auto;
margin-left: auto;
color: #F4F4F4;
/* IE10 Consumer Preview */
background-image: -ms-linear-gradient(left, #716375 0%, #E8E8E8 100%);
/* Mozilla Firefox */
background-image: -moz-linear-gradient(left, #716375 0%, #E8E8E8 100%);
/* Opera */
background-image: -o-linear-gradient(left, #716375 0%, #E8E8E8 100%);
/* Webkit (Safari/Chrome 10) */
background-image: -webkit-gradient(linear, left top, right top, color-stop(0, #716375), color-stop(1, #E8E8E8));
/* Webkit (Chrome 11+) */
background-image: -webkit-linear-gradient(left, #716375 0%, #E8E8E8 100%);
/* W3C Markup, IE10 Release Preview */
background-image: linear-gradient(to right, #716375 0%, #E8E8E8 100%);
margin-bottom: auto;
#Bar {
background-repeat: no-repeat;
width: 880px;
height: 28pt;
overflow: visible;
background-image: url(Images/NAvigation%20BAr.jpg);
position: relative;
vertical-align: top;
#container {
width: 880px;
color: #000;
background-color: #EDEDED;
dominant-baseline: 578px;
/* IE10 Consumer Preview */
background-image: -ms-linear-gradient(left, #716375 0%, #E8E8E8 100%);
/* Mozilla Firefox */
background-image: -moz-linear-gradient(left, #716375 0%, #E8E8E8 100%);
/* Opera */
background-image: -o-linear-gradient(left, #716375 0%, #E8E8E8 100%);
/* Webkit (Safari/Chrome 10) */
background-image: -webkit-gradient(linear, left top, right top, color-stop(0, #716375), color-stop(1, #E8E8E8));
/* Webkit (Chrome 11+) */
background-image: -webkit-linear-gradient(left, #716375 0%, #E8E8E8 100%);
/* W3C Markup, IE10 Release Preview */
background-image: linear-gradient(to right, #716375 0%, #E8E8E8 100%);
margin-bottom: auto;
#content {
float: left;
color: #090;
width: 580px;
padding-right: 6px;
background-color: #033;
margin-top: 20px;
.container {
color: #000;
background-color: #ff6;
width: 876px;
#expect {
height: 164px;
width: 294px;
float: right;
position: relative;
background-color: #C90;
margin-left: 582px;
padding-top: 10px;
#hours {
float: left;
height: 55px;
width: 294px;
line-height: 4px;
word-spacing: normal;
white-space: normal;
display: inline;
letter-spacing: normal;
padding-top: 10px;
font-size: 13pt;
color: #000;
margin-left: 586px;
background-color: #F99;
#footer {
height: 76px;
width: 880px;
background-color: #CC0;
clear: both;
#cards {
float: right;
height: 31px;
width: 294px;
margin-left: 582px;
padding-top: 10px;
background-color: #F36;
#contact {
float: left;
height: 328px;
width: 293px;
word-spacing: normal;
white-space: normal;
line-height: 1px;
color: #000;
display: inline;
font-size: 14pt;
background-color: #FFF;
padding-top: 10px;
margin-top: 20px;
#header {
background-image: url(Images/Proquip%20Logo/Proquip%20logo2.jpg);
background-repeat: no-repeat;
background-position: center center;
width: 885px;
height: 126px;
background-color: #000;
margin-right: 2.5px;
margin-left: 0px;
#wrapper #container #contact p strong {
color: #800000;
font-size: 14pt;
#wrapper #container #contact blockquote p a {
color: #000;
#wrapper #container #expect div {
color: #900;
font-size: 14pt;
font-weight: bold;
#wrapper #container #hours div {
color: #900;
font-size: 14pt;
font-weight: bold;
#box2 {
background-image: url(Images/Option%201/Services/whitebox2.jpg);
#box3 {
background-image:url(Images/Option%201/Services/redbox2.jpg);
background-repeat:no-repeat;
background-position: center center;
#gold {
background-image:url(Images/Option%201/Logos/gold.gif);
background-repeat:no-repeat;
#white {
background-image:url(Images/Option%201/ProQuip-Pics/box1.gif);
background-repeat:no repeat;
#forklift {
background-image:url(Images/Option%201/ProQuip-Pics/34-01-4380.jpg);
background-repeat:no-repeat;
#scissorlift {
background-image:url(Images/Option%201/ProQuip-Pics/jlg-scissor-lifts-21.jpg);
background-repeat:no-repeat;
/* Navigation Menu- Level one */
ul {
list-style: none
ul.dropdown {
font-size: 13pt;
color: #000000;
height: 25px;
text-decoration: none !important;
width: 860px;
position: relative;
vertical-align: top;
ul#Bar.dropdown {
width: 878px;
position: relative;
vertical-align: top;
ul.dropdown li {
font-weight: 600;
float: left;
zoom: 1;
font-family: Arial, Helvetica, sans-serif;
font-size: 13pt;
display: block;
width: 175px;
color: #000000;
top: 25px;
text-decoration: none !important;
text-align: center;
ul.dropdown a:hover {
color:#cc0000;
ul.dropdown a:active {
color: #000000;
ul.dropdown li a {
display: block;
border-right: 1px solid#333;
color: #000000;
border-right-width: 1px;
text-decoration: none !important;
text-align: center;
ul.dropdown li:last-child a {
border-right:none; /* does not wotk in IE */
text-decoration:none !important; }
ul.dropdown li.hover,
ul.dropdown li.hover {
color: #000000;
position: relative;
height: 28px;
top: 0px;
ul.dropdown li.hover a {
color:#800000;
/* Level Two Navigation */
ul.dropdown ul {
width: 180px;
visibility: hidden;
position: absolute;
top: 100%;
left: 36%;
display: block;
float: left;
color: #000000;
text-decoration: none !important;
height: 25px;
ul.dropdown ul li {
font-weight: normal;
color: #000000;
border-bottom: 1px solid #ccc;
float: left;
border-bottom-color: #c0c0c0;
border-bottom-style: groove;
display: block;
background-color: #dbdbdb;
text-decoration:none !important;
/* IE 6&7 needs inline block */
ul.dropdown ul li a {
border-right: none;
display: inline-block;
height: 18px;
line-height: 16px;
color: #000000;
width: 100%;
text-decoration: none !important;
/* Level Three Navigation */
ul.dropdown ul ul {
top: 100%;
color: #000000;
text-decoration: none !important;
ul.dropdown li:hover>ul {
visibility: visible;
color: #000000;
top: 30px;
text-decoration: none !important;

I have the site using tables up and running, this is a website for a client so I cant make a test site using that domain would it be ok if I screen shot'ed the problem?
Date: Thu, 24 Apr 2014 12:19:44 -0700
From: [email protected]
To: [email protected]
Subject: CSS Layout issue!! Help Urgent!!
    Re: CSS Layout issue!! Help Urgent!!
    created by Jon Fritz II in Dreamweaver support forum - View the full discussion
Well, you're not using position:absolute, so you've got a big thumbs up from a bunch of us for that.
Is there any chance you could post a link to this page on your server? It's much easier to troubleshoot from a browser than it is to rebuild the page from code fragments.
If you haven't gone live with the page yet, create a folder called TEST in your site and save copies of the page and css there. Upload TEST and post a link to it here. Once the problem is found/fixed, delete TEST from the server.
You can also attempt to use Firefox or Chrome to find your issue by right clicking > Inspect Element. All CSS that affects a given element will be displayed with file name and line numbers there.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6327947#6327947
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6327947#6327947
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6327947#6327947. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Urgent problem, mate

Hello experts:
     Thank you in advance for all your replies.
     there is a function--- ENQUEUE_EFPAYR failed with exception 8, who know the possible reason,   how a function raise an exception, how to locate where it is , search by raise ? please
help me with that urgent problem .
      couldn't thank you more.
Best regards.

Hi,
The ecxeption no 8 corresponds to the 8th exception that is listed in the exception tab of the FM when you open the FM in SE37.
Exceptions are raised inside the FM . The syntax is 'RAISE <EXCP> .' where <EXCP> is the name of exception.
For the enque FMs if you search for term 'raise' in the code you may not find the place where it is raised, as this FM calls some forms within it that are not part of the function groups so cannot be searched directly. You can debug it with breakpoint at statement 'RAISE' to locate it.

URGENT Problem with Greek Character from an Oracle database

Hello, I am having a serious and urgent problem with the character settings of an oracle database (8.1.7). The database is sitting in a solaris unix server and when we run the env command we have the following in the NLS_LANG parameter: AMERICAN_AMERICA.WE8ISO8859P1 (I do not know if this is helpful). When I retrieve data from oracle database (through a VB.NET 2005 program)to a dataset I use a special font in order to see the greek characters (HELLASARIAL). But when I am trying to save these data to a TXT file the greek characters are like Chinese to us. I tried several encodings (System.Text.Encoding.GetEncoding(869)) but without success. Can someone tell me how to convert the oracle greek characters during the selection or during the saving to the TXT file?
Please respond as fast as you can.
Thanks in advance

Here is the answer of the microsoft:
I have the information that you have a VB.Net 2005 application connected to an Oracle database 8.1.7.4 hosted on a UNIX server.
This database has the CharacterSet WE8ISO8859P1.
When retrieving Greek characters from this database in the application, you cannot see them.
Could you please send me a screenshot of these characters in the .Net application?
Are they displayed as gibberish, or as inverted questions marks (?)?
I already had similar cases with Hebrew characters hosted on an Oracle database.
These characters were displayed as questions marks on the client side.
This is due to the fact that System.Data.OracleClient is using the Server CharacterSet to display the characters.
If your Greek characters are not stored in the WE8ISO8859P1 characterset, then they won’t display correctly on the client-side.
This is different from OLEDB where you could interact on client side by modifying the NLS_LANG parameter in the registry HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME0.
The client NLS_LANG and the server CharacterSet had to match in order to correctly display the data, and avoid SQL*NET conversion.
So there are two solutions to your case:
- The first one is to create a new database using the P8 characterset. The Oracle .Net managed provider will so be able to use it and display the characters correctly.
- The second one is to use the OLEDB.Net managed provider, and then use OLEDB for Oracle provider. OLEDB will take care of the client NLS_LANG registry parameter.
Would it be possible to test your application against an Oracle database with WE8ISO8859P8 characterset?
Would it be possible to test it with the OLEDB .Net managed provider, and after checking the NLS_LANG client registry parameter?

*URGENT* Problem in SOP

Dear gurus,
We face a very urgent problem in our Sales & Operations Planning, any help is greatly appreciated.
We created a planningtype based on an underlying infostructure. (trx MC8A)
The problem we now have is that some numbers that we see in the infostructure table (using trx SE16), do not appear in the planningtype with trx MC94/MC95.
How is this possible??
Thanks for your thoughts!
Rgds, AJ

Problem solved itself. As always: masterdata..!

Urgent problem: grouping by fields of internal table

Hi friend,
i have a urgent problem and i hope that you can help me out:
i have an internal table containing data, and i sorted it by 3 fields.
now what i want to do is kind of grouping that means that all the lines that are the same should be written into another internal table like this:
A
A
B
B
B
C
D
would give me:
A                       1
A                       1
B                       2
B                       2
B                       2
C                       3
D                       4
How could i do this ( especially avoiding nested loops ? ) Is there a handy trick to do this efficiently ?
thank you, i will give points immediately,
Clemens

Hello,
The field position is important for the fields that are using in the control break statements..Also SORT internal table is required.
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb381a358411d1829f0000e829fbfe/content.htm
DATA: BEGIN OF ITAB OCCURS 0,
MATNR TYPE MATNR,
WERKS TYPE WERKS_D,
VALUE TYPE NETPR,
END OF ITAB.
ITAB-MATNR = 'ABC'.
ITAB-WERKS = '0100'.
ITAB-VALUE = '10.00'.
APPEND ITAB.
ITAB-MATNR = '1ABC'.
ITAB-WERKS = '0100'.
ITAB-VALUE = '10.00'.
APPEND ITAB.
SORT ITAB BY MATNR WERKS.
LOOP AT ITAB.
AT FIRST.
WRITE : 'AT FIRST'.
ENDAT.
AT NEW MATNR.
WRITE : 'AT NEW MATERIAL NUMBER'.
ENDAT.
AT END OF MATNR.
SUM.
WRITE: / ITAB-MATNR, 'MATERIAL TOTAL - ', ITAB-VALUE.
ENDAT.
AT END OF WERKS.
SUM.
WRITE: / ITAB-WERKS, 'PLANT TOTAL - ', ITAB-VALUE.
ENDAT.
AT LAST.
WRITE : 'AT LAST'.
ENDAT.
ENDLOOP.
Regards,
Deepu.K

Help- Urgent Problem

Similar Messages

Maybe you are looking for